Error while trying to attach absences using SSP.
HI
When I attach an absence through SSP , I get the error APP-SPP- 35075 You may not enter a 'withold to' date for a permanent witholding reason .
Iam new to benefits/OSP/OMP and hence unbale to figure the next next steps.
ANy help will be appreciated greatly.
Checks ensured.
1) Navigate to SSP > SSP Qualifying Patterns
Query existing patterns and verify that there is a Calendar Usage for the person or that person's Business Group - Verified.
2)Query the 'NIable Pay' balance and verify that the ASGRUN value is non-zero - Verified.
Regards
Pradhan S
Duncan,
Tried attaching an absence to a diff employee it gives the same Withholding error. First when I tried i got the error sayin no witholding reason for Waiting day.After I defined a witholding reason for waiting iam getting the error as APP-SPP-35075 You may enter a 'withholding to' date for a permanent withholding reason.( I have defined only o couple of withholding reasons where as DEV instance has many defined.Do not think this will matter though).
Anyways , Iam just stating the steps followed for SSP.Kindly review.
1)Created a Pattern Unit.
Name : HR_UK_Working_Days
Meaning : Qualifying Days Unit Multiplier : 5
Base Time Unit :Days
2)Created a Pattern
Name : HR_UK_SSP_Pattern
Weekday : Sunday
Hour 0:00 Pattern Purpose : SSP Qualifying Pattern
Pattern Construction :
Time Unit : HR_UK_Working_Days Availablity : Qualifying
Clicked on Calendars tab
Created a calendar
Name : HR_UK_SSP_Calendar
Date : 06-JAN-1980
--No calendar exceptions defined
Clicked on calendar usages ..
Defined usage to Business group UK BG.
3) Entered absence type for an employee using SSP.Then save and getting the error.
Let me know if there are any issues in the above steps.
Thanks
Pradhan S
Similar Messages
-
Update was terminated error while trying to attach output type to VA22
Hi
We are getting the below message while trying to attach output type to quotation in VA22 transaction
Can you tell us what exactly the problem is?
It doesn't happen with other output types...
Update was terminated
System ID.... PEQ
Client....... 300
User..... Swetha
Transaction.. VA21
Update key... 1CB83C9AAEF946C8A1CDE4E19BC94479
Generated.... 19.05.2008, 08:22:54
Completed.... 19.05.2008, 08:23:41
Error Info... Application area: /SMB40/SSFCOMPOSER , message no.: 002, no entry found in T100
Regards
SudhaHi ,
Please check the message in the table - T100 using transaction se11. You might get the answer.
Thanks
vamshi -
Getting error while trying to refresh EUL using adrfseul.sh
I am getting the following error while trying to refresh EUL. I am using Discoverer
10.2.0.2 with Oracle Applications 11.5.10.2 and following note id 313418.1 of metalink.
You are running adrfseul, version 115.0
Start of adrfseul session
Date/time is Thu Feb 22 13:06:56 AST 2007
Log file is refresh_eul_us_vis.log
Command line arguments are
"connect=sysadmin/sysadmin@vis"
"resp=System Administrator"
"gwyuid=APPLSYSPUB/PUB"
"fndnam=APPS"
"secgroup=Standard"
"eulschema=EUL_US"
"eulpassword=EUL_US"
"twotask=VIS"
"iashome=/oracle/BIHome_2"
"logfile=refresh_eul_us_vis.log"
"exedir=/oracle/BIToolsHome_1/bin"
Testing connection to database using plus80 -s ...
plus80: adrfseul.sh 612: not found
Connection to database using plus80 -s is OK ...
Extracting eul folder information ...
plus80: adrfseul.sh 612: not found
Unable to obtain folder information.
The SQLPLUS session exited with status 127
adrfseul is exiting with status 1
End of adrfseul session
Date/time is Thu Feb 22 13:06:56 AST 2007
Anyone knows please help me to resolve this issue. Thanks in advance.
Regards
Muhammad AliEUL_US is an Apps mode EUL and SYSADMIN user is the owner of all EUL content in Oracle Applications environments. The unix/linux bi tools can upgrade the EUL via
$ORACLE_HOME/bin/eulapi -CONNECT eul_us/eul_us@vis -AUTO_UPGRADE
Use the Windows bi tools to update and refresh EUL content or look at the following note:
5712119 / 5258810 : Adrfseul.Sh Errors On New Installation Of Disco 10.1.2 & 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=404398.1 -
Error while trying to create tree using same EMP how to tutorial
Hi,
I get the following error while trying to create a sample tree similar to the one
posted in the how-tos web page.
The final query that creates the tree is also as follows
The Current Query shown in my apex window and the one on the howtos tutorial is as follows
select "EMPNO" id,
"MGR" pid,
"ENAME" name,
null link,
null a1,
null a2
from "RJOSEEMPCLUB"."EMP"
where DEPTNO = 1
The error is as follows
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Debug:
1: begin
2: wwv_flow_wiz_confirm.create_tree (
3: p_flow_id => :FB_FLOW_ID,
4: p_region_template => replace(:F4000_P112_REGION_TEMPLATE,'%'||'null%',null),
5: p_start_option => :F4000_P112_START_OPTION,
6: p_owner => :F4000_P112_OWNER,
7: p_table_name => :F4000_P112_TABLE,
8: p_id => :F4000_P112_ID,
9: p_pid => :F4000_P112_PID,
10: p_name => :F4000_P112_NAME,
11: p_link_option => :F4000_P112_LINK_OPTION,
12: p_link_page_id => :F4000_P112_LINK_PAGE_ID,
13: p_link_item => :F4000_P112_LINK_ITEM,
14: p_where => :F4000_P112_WHERE,
15: p_order_by => :F4000_P112_ORDER_BY,
16: p_page_id => :F4000_P112_PAGE_ID,
17: p_page_name => :F4000_P112_PAGE_NAME,
18: p_tab_set => :F4000_P112_TAB_SET,
19: p_tab_text => :F4000_P112_TAB_TEXT,
20: p_region_name => :F4000_P112_REGION_NAME,
21: p_tree_name => :F4000_P112_TREE_NAME,
22: p_tree_type => :F4000_P112_TREE_TYPE,
23: p_max_levels => :F4000_P112_MAX_LEVELS);
24: end;Hi Kart,
If you have the sample EMP table, the DEPTNO values are 10, 20 or 30.
Did you specify a root value for the tree?
Regards
Andy -
Error while trying to access WebService using WSIF
Hi All,
I am a new developer to WebServices. I read up information on how to create the WSDL and stubs using JDev 10g (10.1.2) using the wsa.jar that ships with the download. After creating my WSDL and the necessary proxies, when I try to run my client application (which runs in the same covatiner, standalone OC4j), I get the below error :
06/09/29 13:42:21 org.apache.wsif.WSIFException: org.apache.wsif.providers.ejb.WSIFOperation_EJB@15b0c83 : Could not invoke 'getOrderList'; nested exception is:
org.apache.wsif.WSIFException: Error while determining signature of method getOrderList : The meta information is not consistent.; nested exception is:
org.apache.wsif.WSIFException: parameters
06/09/29 13:42:21 at org.apache.wsif.providers.ejb.WSIFOperation_EJB.executeRequestResponseOperation(WSIFOperation_EJB.java:1259)
06/09/29 13:42:21 at org.apache.wsif.base.WSIFClientProxy.invoke(WSIFClientProxy.java:339)
06/09/29 13:42:21 at $Proxy3.getOrderList(Unknown Source)
I am trying to expose a Stateless Session EJB as a WebService, which contains a method called getOrderList(). This method returns an array of a complex type (Java Bean).
I am, however, able to succesfully access the WebService using the SOAP/HTTP protocol.
My client code is as follows:
WSIFServiceFactory factory = WSIFServiceFactory.newInstance();
WSIFService service = factory.getService("<path to wsdl>", null, null, "http://sample.com/", "OrderService");
orderService = (OrderService) service.getStub("WsifEjb", OrderService.class);
Not sure what am I missing here. If any further information is required in order to resolve this, please let me know.
Thanks,You are trying to get 2 databases connected... so, you need to insure that FDEV can find and connect to ABCD.
So, from your FDEV database server, you can do 2 things (from command prompt):
1* tnsping ABCD (this will validate that the entry exists in your tnsnames.ora on your FDEV server, and that a valid listener can be found on remote server)
when above command succeeds:
2* sqlplus apps/appsdev@ABCD;
when you have established the connection, then you are SURE that your can connect ABCD database from FDEV database server. It will also validate the username / password combination, create session privilige, account not locked, etc.....
Please check the above, and post here the results.
HTH,
Thierry -
Error while trying to move file using File adapter
Hi, I am trying one scenario to move file from one remote folder to other using file adapter as mentioned in heading 4.5.11.1 at http://download.oracle.com/docs/cd/E21764_01/integration.1111/e10231/adptr_file.htm#CHDGFAAB. But I am receiving the below error:
<messages><input>
<Invoke1_FileMove_InputVariable><part name="Empty" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><empty xmlns="http://xmlns.oracle.com/pcbpel/adapter/opaque/"/></part></Invoke1_FileMove_InputVariable></input><fault>
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "*JCA Binding execute of Reference operation 'FileMove' failed due to: Exception occured when binding was invoked.*
*Exception occured during invocation of JCA binding: "*Could not instantiate InteractionSpec oracle.tip.adapter.file.outbound.FileReadInteractionSpec due to: Cannot set JCA WSDL Property.**
**Error while setting JCA WSDL Property.**
**Property setSourcePhysicalDirectory is not defined for oracle.tip.adapter.file.outbound.FileReadInteractionSpec**
**Please verify the spelling of the property.**
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary></part><part name="detail"><detail>Cannot set JCA WSDL Property.
Error while setting JCA WSDL Property.
Property setSourcePhysicalDirectory is not defined for oracle.tip.adapter.file.outbound.FileReadInteractionSpec
Please verify the spelling of the property.
</detail></part><part name="code"><code>null</code></part></bindingFault></bpelFault></fault><faultType>
<message>0</message></faultType></messages>
Please provide any insight if someone have tried this.
Thanks,
rpsHi rps,
Your interaction-spec className seems to be incorrect (FileReadInteractionSpec).
<interaction-spec className="oracle.tip.adapter.file.outbound.FileIoInteractionSpec">
</interaction-spec>Please try with the above interaction spec and let me know the outcome.
Regards,
Neeraj Sehgal -
'Data Access Error' while trying to delete period using Table Editor in FDM
Hi,
I'm trying to delete a period that has been entered wrongly using Tools->Table Editor option.
But when I try to 'Update Grid' after deleting the Period,I get 'Data Access Error'.
Could any one let me know how to solve the error.
Thanks in advanceHi Kelly,
There is no data that is entered in that period.The data will be entered for that period next month.
POV is also not set to that period,but still the problem persists.
Thanks -
Error while trying to run program using java.exe
First of all I'd like to apoligize if this thread already exists here somewhere.. I've spent the last hours Googling and searching the forums for an answer, but haven't found one, so I posted a topic..
The problem is the following:
I'm using Netbeans 5.5 with JDK1.6.0. When I build/run a Java application in this IDE, I get no errors whatsoever..
But, when I try to run it from the prompt, using following code (I copied the .class file into the same directory as the .java file)
java -classpath . main.javaI get the following errors:
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Sour
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$000(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Metho
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Sourc
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)I'm quite sure that the problem is something I'm simply missing, since Netbeans runs everything without troubles..
Anyone an idea how I could solve this problem? (Trust me, I checked the net, lots of people with this prob, but no decent solutions given)
Thanks in advance (and once again sorry if this thread already existed).
Greetings,
TribioOh, forgot the first error line indeed, thanks for pointing that out.
D:\Tribio\JPF\src\jpf>java -cp . main
Exception in thread "main" java.lan.NoClassDefFoundError: main (wrong name: jpf/Main)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Sour
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$000(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Metho
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Sourc
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)And concerning the package question. In the code of main.java I define the package jpf as follows:
package jpf;Hateful problem, and I so wanna use the prompt java once in a while instead of having to rely on NetBeans..
And you're not at all looking at it too simple, any input on the matter is appreciated.. :) -
Error while trying to access table using DB Link
Hi All,
I had to access a table in another instance using a DB link. As there was no DB link, I was asked to create one and then access the table.
The below query was used to create DB link on my current instance FDEV:
CREATE PUBLIC DATABASE LINK to_link CONNECT TO apps IDENTIFIED BY appsdev USING 'ABCD';
The DB link gets created successfully and when I query select * from all_db_links on my current instance FDEV, I see the DB link name.
However, when I try to access the table, select * from x_stg@to_link on my current instance FDEV, this is resulting in an error as shown below:
ORA-01017: invalid username/password; logon denied
ORA-02063: preceding line from TO_LINK
The TNS entry looks something like this:
ABCD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = abc.xx.com)(PORT = 1234))
(ADDRESS = (PROTOCOL = TCP)(HOST = abc.xyz.com)(PORT = 1234))
(CONNECT_DATA =
(SID = ABCD)
Can someone help me in this regard?
Thanks in Advance!!
Regards,
ABYou are trying to get 2 databases connected... so, you need to insure that FDEV can find and connect to ABCD.
So, from your FDEV database server, you can do 2 things (from command prompt):
1* tnsping ABCD (this will validate that the entry exists in your tnsnames.ora on your FDEV server, and that a valid listener can be found on remote server)
when above command succeeds:
2* sqlplus apps/appsdev@ABCD;
when you have established the connection, then you are SURE that your can connect ABCD database from FDEV database server. It will also validate the username / password combination, create session privilige, account not locked, etc.....
Please check the above, and post here the results.
HTH,
Thierry -
File not found error while trying to generate stub using wsdl2java
Hi
I am facing this peculiar problem while generating the stub thru the wsdl2java command.
It shows series of file not found exception.
What all thing need to be set or taken care while we execute the command . anybody having window script for doing this please share it with me.
Your help is higly appreciated
Thanks
OttranIt could be that the wsdl file is not found if you are invoking this command for a wsdl which is locally existing
Could you send the command and the exception msgs that you are getting
Regards
Mari -
Getting Error while trying to create table using entity beans
This is the output on console.
javax.ejb.TransactionRolledbackLocalException: Exception thrown from bean; neste
d exception is: javax.ejb.EJBException: nested exception is: java.sql.SQLExcepti
on: [Oracle][ODBC][Ora]ORA-00942: table or view does not exist
javax.ejb.EJBException: nested exception is: java.sql.SQLException: [Oracle][ODB
C][Ora]ORA-00942: table or view does not exist
java.sql.SQLException: [Oracle][ODBC][Ora]ORA-00942: table or view does not exis
t
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6879)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7036)
at sun.jdbc.odbc.JdbcOdbc.SQLExecute(JdbcOdbc.java:3104)
at sun.jdbc.odbc.JdbcOdbcPreparedStatement.execute(JdbcOdbcPreparedState
ment.java:214)
at sun.jdbc.odbc.JdbcOdbcPreparedStatement.executeQuery(JdbcOdbcPrepared
Statement.java:89)
at com.sun.ejb.persistence.PersistenceManagerImpl.primaryKeyExists(Persi
stenceManagerImpl.java:289)
at com.sun.ejb.persistence.PartitionImpl.afterEjbCreate(PartitionImpl.ja
va:640)
at CallerBean_PM.ejbCreate(CallerBean_PM.java:96)This is the output on console.
javax.ejb.TransactionRolledbackLocalException:
Exception thrown from bean; neste
d exception is: javax.ejb.EJBException: nested
exception is: java.sql.SQLExcepti
on: [Oracle][ODBC][Ora]ORA-00942: table or view does
not exist
javax.ejb.EJBException: nested exception is:Look at what the bolded text is telling you. This could be because:
1. The table/view actually does not exist in the oracle instance that you've connected to
2. OR, the user id that you used to connect to the db does not have the right permissions granted to it. -
Error while trying send emai with attachment
Hello,
I am facing an error while trying to send email with attachment (spreadsheet).
Error is: "Error in calling 'SBCOMS_SEND_REQUEST_CREATE' in 'SO_DOCUMENT_SEND_API1' with Sy-subcr = 1".
Do I need to configure the sender email address or some configuration at the sender system?
I followed the example given in the below link.
http://wiki.sdn.sap.com/wiki/display/ABAP/HowtowriteanABAPProgramtoplaceanExcelfileinapathandsenditasan+Attachment
Could you please help on this?
Thanks & regards,
RavishHi Ravish,
sure you can create local excel using [Desktop Office Integration (BC-CI)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf], load as binary and attach.
More elegant, future-oriented and advanced is the [excel-from-scratch-approach abap2xlsx by Ivan Femia|http://wiki.sdn.sap.com/wiki/display/ABAP/abap2xlsx]
Regards,
Clemens -
I am getting an error while trying to merge some pictures together using photomerge in photoshop cc14, it says photoshop has encounter an error, and it closes photoshop after that, I cannot use photomerge at all, everything else works fine. Any help anyone???
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Error while trying to use '{' in the query
Hi,
The below mentioned query is giving Error while trying to use '{'
Query:
select s,x from table(SEM_MATCH(
'{?s rdf:type <http://www.cs.com/sbip/dwh/mdm/data_modeling#Base_Term> .
?s ?p ?x}',
SEM_Models('foundation'),
SEM_RuleBases('OWLPRIME'),
SEM_ALIASES(SEM_ALIAS('dm','http://www.cs.com/sbip/dwh/mdm/data_modeling#'),
SEM_ALIAS('owl','http://www.w3.org/2002/07/owl#')), null, 'INVALID'))
where regexp_like(x,'Customers','i');
Error details:
ORA-29532: Java call terminated by uncaught Java exception: oracle.spatial.rdf.server.TokenMgrError: Lexical error at line 1, column 1. Encountered: "{" (123), after : ""
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 178
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 67
ORA-06512: at line 4
I am unable to use Option, Filter in query.
Any solution?
Please let me know do i need to apply any patch?
Note: I am using Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Regards,
Kavitha.Hi,
For OPTIONAL support in 11.1.0.7.0, you need the following patch
Patch 7600122: CURLY BRACE SYNTAX,VIRTUAL MODELS, NETWORK INDEXES AND HINTO FRAMEWORK SUPPORT
Support for SPARQL FILTERs in SEM_MATCH is not available for 11.1.0.7.0. You will need version 11.2.0.1.0 or later for FILTER support. With 11.2.0.1.0, we recommend that you apply our latest patch set:
Patch 9819833: SEMANTIC TECHNOLOGIES 11G R2 FIX BUNDLE 2
All of the above patches are available through My Oracle Support.
Thanks,
Matt -
Error while trying to provision OIM user to Active Directory using SSL
Hi All,
I am able to see the users through LDAP browser using SSL but am getting the following error while trying to provision OIM users to AD using SSL.
I am using Microsoft Active Directory connector type 9.11.
Response: Connection Error encountered
Response Description: Error encountered while connecting to target system
I did some testing using "Diagnostic Dashboard" and the following are the results.
Test Name: Target System SSL Trust Verification: Passed
Test Name: Test Basic Connectivity: Failed
Exceptions:
ITResource information values are not correct. Enter the correct values.
java.lang.reflect.InvocationTargetException
javax.naming.CommunicationException: simple bind failed:
unable to find valid certification path to requested target.Test Name: Test Provisioning:Failed
Note: Without SLL all the above tests got Passed.
Can anybody help me out from this issue.
Thanks in advance.
Pradeep Kumar.I am able to connect to AD using 636 port number from LDAP browser and as the following test got Passed i think that my certificatee should be correct.
Test Name: Target System SSL Trust Verification.
Input Parameters
Target System: idm.orademo.com
Port: 636 Certificate Store
Location: /usr/java/jdk1.6.0_14/jre/lib/security/cacerts
Result : Passed
ITResource Values:
ADAM LockoutThreshold Value
ADGroup LookUp Definition Lookup.ADReconciliation.GroupLookup
Admin FQDN cn=Administrator,cn=Users,dc=orademo,dc=com
Admin Password *******
Allow Password Provisioning yes
AtMap ADGroup AtMap.ADGroup
AtMap ADUser AtMap.AD
Invert Display Name no
Port Number 636
Remote Manager Prov Lookup AtMap.AD.RemoteScriptlookUp
Remote Manager Prov Script Path
Root Context dc=orademo,dc=com
Server Address idm.orademo.com
Target Locale: TimeZone GMT
UPN Domain orademo.com
Use SSL yes
isADAM no
isLookupDN no
isUserDeleteLeafNode no
Thansk & Regards,
Pradeep Kumar.
Maybe you are looking for
-
Error during copying of conditions in creating quantity contract
Hi experts, When am trying to create a condition based on the plant it is displaying an error message "Error during copying of conditions". Please let me know the solutions or any configuration is required. Regards, Sunil Kumar.
-
Doubt on Consuming webservices
Hi all, I have a requirement to create a webservice from rfc and third party wantsto consume webservice from external system. I have created rfc and webservice from the same and got wsdl link. Can anyone tell how the external system can access wsdl l
-
Hi. I am trying to add an animation to a magento site. I have narrowed the issue down to a conflict with a file called prototype.js but this is an essential file for the site. In chrome in the console I am getting the messages: Uncaught TypeError: Ob
-
IPS SSP module vs standalone 4200 series devices
Looking at price to performance ratio it seems that the IPS SSP modules are the winner. The 4200 series devices however has hardware bypass which can ensure traffic flow is not interrupted even if the power to the IPS goes down. How likely is it that
-
hello i wanna know if on j2me technology exists an specific api for webservices... i mean, if my application consume a webservice do i need to use third party api's or there's an api that was offered by Sun to us... ? Could you tell me plz??? thanx