Error while trying to send a file through XI to SAP R/3 based OLTP system

Hi all,
I encountered with an error in the runtime workbench for the below mentioned scenario
ERROR message
<b>Unknown error: javax.ejb.CreateException: Neither messager server nor application server are defined for system IXI</b>
SCENARIO
The manufacturing system triggers an equipment failure. The failure message is sent through SAP Exchange Infrastructure (SAP XI) to the SAP R/3 based OLTP system,
changing the equipment status to a failure state. This is achieved by triggering the execution of Remote Function Call (RFC) present in the OLTP system from the SAP XI integration server.
Thanks and regards
Jishi

Hi Jishi,
Please check the Receiver RFC communication channel in your integration directory.
Check the logon parameters provided. From the error message, I guess there is no application server or message server provided, which is mandatory for XI to logon to the target backend R/3 system.

Similar Messages

Error while trying to raise a Goods Receipt PO in SAP B1 v 9.0

Hi Experts,
while trying to raise a Goods Receipt PO in SAP B1 v 9.0 the following error is been generated:
You should use existing Serial/batch number for this document type [21-59 ]
Note:We are able to generate Goods Receipt PO for an item which is not serialized.
Thanks
Regards,
Satish.

Hi Edy,
Dim oPDN As SAPbobsCOM.Documents
oPDN = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseDeliveryNotes)
                oPDN.CardCode = "C232323"
                oPDN.Lines.ItemCode = "A00004"
                'oGR.Lines.LineNum = 0
                oPDN.Lines.BaseLine = 1
                oPDN.Lines.BaseEntry = 202
                'oGR.Lines.BaseRef = 203
                oPDN.Lines.BaseType = 20
                oPDN.Lines.Quantity = 1
                oPDN.Lines.UnitPrice = 2
                oPDN.Lines.WarehouseCode = '01'
                    oPDN.Lines.SerialNumbers.InternalSerialNumber = 3
                    oPDN.Lines.SerialNumbers.SystemSerialNumber = "Sh01"
                    oPDN.Lines.SerialNumbers.ManufacturerSerialNumber = "Mf01"
                    oPDN.Lines.SerialNumbers.SetCurrentLine(iRowNo)
                    oPDN.Lines.SerialNumbers.Add()
                End If
            Next
            oPDN.Lines.Add()
            lRetCode = oPDN.Add
Thanks,
Satish.

Error while trying to send a report link/page through email

Hi,
I was trying to send a bam report url through email but the following error occurs when i click on send button :
The Message Center component is not configured correctly.The "Email Account for Alerting" field isn't specified correctly.Contact your system administrator to fix this
Anyone help me by giving a solution
Thanks in advance

Hi, firstly I would like to ask whether, are you trying to send report URL in an alert mail? If it is so, then you have to configure your SMTP settings in your 'Message Center'. The steps to configure are as below-
To configure the Message Center settings:
1. Select Message Center Management from the drop down list.
Some table cells are blank the first time you install the Oracle Business Activity
Monitoring applications.
2. Click Edit.
3. Enter the mail server machine name or IP address in the SMTP Server Name field.
The mail server must have the capabilities to send email to other SMTP servers
that Active Viewer users specify in their personal settings.
4. Enter an email account including the domain used by the Oracle BAM service in
the Email Account for Alerting field. This is the account that will appear in the
From header of e-mailed alerts.
5. Click Save to save your changes.
6. Restart the Oracle BAM Event Service to make the changes effective.
Let me know if this helps. If this is not the requirement, please mention your requirement precisely.
Harsha.

Error while trying to send mail to user - intermediate channel settings

Hi,
I am trying to implement the intermediate_channel code program, and for that I have made changes to my configuration file as follows.:-
if you search for the phrase '" ADDED", it will take you to all those places where I have made entries.
! IMTA configuration file
! part I : rewrite rules
! Domain Rewrite Rules.
! Uncomment this line to use domain rewrite rules
! from the configuration file instead of the domain database.
! Please refer to the iMS documentation for details.
!<IMTA_TABLE:domains.rules
!ADD start
startcom.com $U%startcom.com@x-looptest-daemon$Nxloop_test
startcom.com [email protected]
!ADD end
! ims-ms
.ims-ms-daemon $U%$H.ims-ms-daemon@ims-ms-daemon
! lmtp
!.lmtp $U%$H@lmtpcs-daemon
! lmtpn
!.lmtpn $U%$H@lmtpcn-daemon
! native
.native-daemon $U%$H.native-daemon@native-daemon
! pipe
.pipe-daemon $U%$H.pipe-daemon@pipe-daemon
! tcp_local
! Rules for top level internet domains
<IMTA_TABLE:internet.rules
! tcp_intranet
! Do mapping lookup for internal IP addresses
[] $E$R${INTERNAL_IP,$L}$U%[$L]@tcp_intranet-daemon
.startcom.com $U%$H.startcom.com@tcp_intranet-daemon
* $U%$&0.startcom.com
! reprocess
reprocess $U%reprocess.mahanadi.startcom.com@reprocess-daemon
reprocess.mahanadi.startcom.com $U%reprocess.mahanadi.startcom.com@reprocess-daemon
! process
process $U%process.mahanadi.startcom.com@process-daemon
process.mahanadi.startcom.com $U%process.mahanadi.startcom.com@process-daemon
! defragment
defragment $U%defragment.mahanadi.startcom.com@defragment-daemon
defragment.mahanadi.startcom.com $U%defragment.mahanadi.startcom.com@defragment-daemon
! conversion
conversion $U%conversion.mahanadi.startcom.com@conversion-daemon
conversion.mahanadi.startcom.com $U%conversion.mahanadi.startcom.com@conversion-daemon
! bitbucket
bitbucket $U%bitbucket.mahanadi.startcom.com@bitbucket-daemon
bitbucket.mahanadi.startcom.com $U%bitbucket.mahanadi.startcom.com@bitbucket-daemon
! deleted
deleted-daemon $U%$H@deleted-daemon
.deleted-daemon $U%$H@deleted-daemon
! inactive
inactive-daemon $U%$H@inactive-daemon
.inactive-daemon $U%$H@inactive-daemon
! hold
hold-daemon $U%$H@hold-daemon
.hold-daemon $U%$H@hold-daemon
! part II : channel blocks
defaults logging notices 1 2 4 7 copywarnpost copysendpost postheadonly noswitchchannel immnonurgent maxjobs 7 defaulthost startcom.com startcom.com
! delivery channel to local /var/mail store
l subdirs 20 viaaliasrequired maxjobs 7 pool LOCAL_POOL
mahanadi.startcom.com
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D
ims-ms-daemon
! native
native defragment subdirs 20 maxjobs 1
native-daemon
! pipe
pipe single defragment subdirs 20
pipe-daemon
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0
tcp-daemon
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel saslswitchchannel tcp_auth missingrecipientpolicy 4
tcp_intranet-daemon
! tcp_submit
tcp_submit submit smtp mx single_sys mustsaslserver maytlsserver missingrecipientpolicy 4
tcp_submit-daemon
! tcp_auth
tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4
tcp_auth-daemon
! tcp_tas
tcp_tas smtp mx single_sys allowswitchchannel mustsaslserver maytlsserver deliveryflags 2
tcp_tas-daemon
! tcp_lmtpss (LMTP server - store)
!tcp_lmtpss lmtp subdirs 20
!tcp_lmtpss-daemon
! tcp_lmtpsn (LMTP server - native)
!tcp_lmtpsn lmtp subdirs 20
!tcp_lmtpsn-daemon
! tcp_lmtpcs (LMTP client - store)
!tcp_lmtpcs defragment lmtp port 225 nomx single_sys subdirs 20 maxjobs 7 pool SMTP_POOL dequeue_removeroute
!lmtpcs-daemon
! tcp_lmtpcn (LMTP client - native)
!tcp_lmtpcn defragment lmtp port 226 nomx single_sys subdirs 20 maxjobs 7 pool SMTP_POOL dequeue_removeroute
!lmtpcn-daemon
! reprocess
reprocess
reprocess-daemon
! process
process
process-daemon
! defragment
defragment
defragment-daemon
! conversion
conversion
conversion-daemon
! bitbucket
bitbucket
bitbucket-daemon
! deleted
deleted
deleted-daemon
! inactive
inactive
inactive-daemon
! hold
hold slave
hold-daemon
!ADD start
! intermediate channel test
xloop_test smtp immnonurgent backoff "pt1m" "pt1m" "pt1m" "pt1m" master_debug slave_debug
x-looptest-daemon
! ADD end
imsimta version shows:-
Sun Java(tm) System Messaging Server 6.1 (built Apr 28 2004)
libimta.so 6.1 (built 13:10:36, Apr 28 2004)
Question is: when I try to send a mail to the user as
[email protected], it gives an error.
I am trying to send a mail from another of my linux machines as
telnet mahandi.startcom.com 25
at
rcpt to: [email protected], it throws the error:
550 5.1.2 unknown host or domain: [email protected]
What could be the possible reason for this.
thanks ,
Sandeep.

I think I should first tell you what we want to do:-
For each message that comes in:-
1) we want it to be sent to our program
2) from our program we want to call our application that will go through the message, and on the basis of certain rules built into the application, will decide whether the message needs to be re-enqueued or discarded.
For the above I need to certain configurations.
I think I can use the intermediate_channel.c program that comes with the SDK in the /example/mtasdk directory, and from that program can call the application.
Please suggest on the above.
Coming to my present configurations.
No, I had not added the xloop_test channel to the job_controller.cnf file.
However, I had added the channel to the job_controller.site file as:-
[CHANNEL=xloop_test]
master_command=/opt/SUNWmsgsr/examples/mtasdk/intermediate_channel
(where intermediate_channel is the compiled version of the intermediate_channel.c pogram that comes with the SDK examples.)
Now, I have done something else:-
First, in the imta.cnf file, I have removed the
above 2 lines from the part I : rewrite rules, keeping the part 2 same and I added the following line:
$* $U%$D@x-looptest-daemon$Nxloop_test
I have added the following 2 lines to the job_controller.cnf file.
[CHANNEL=xloop_test]
slave_command=/opt/SUNWmsgsr/examples/mtasdk/intermediate_channel
With this configuration, my message is going to my yahoo account, and the mail.log_current file is showing the enqueue and deque, however, my intermediate_channel program is not being invoked.
This is where I am getting confused now.
thanks.

Xpath error while trying to send attachment with email

Hi,
I was trying to execute the BPEL sample - SendingAttachementWithEmail, as given in the tutorials.
I had mapped the 'contentBody' in attachment[2] to
ora:readFile(bpws:getVariableData('inputVariable','payload',
'/client:SendEmailWithAttachmentProcessRequest/client:attachmentURI')
I have a file called "SOA.txt" in my C:\ (C drive).
I specified the following details in my 'initiate' screen
to - jcooper
subject - sample email
body - testing how to send email with attachment
attachmentName - SOA.txt
attachmentMimeType - multipart/mixed
attachmentURI - file:C:/SOA.txt
I got the following error while executing the process, can any one please tell me where I am going wrong. Are the values I am passing correct?
Error
XPath expression failed to execute.
Error while processing xpath expression, the expression is "ora:readFile(bpws:getVariableData("inputVariable", "payload", "/client:SendEmailWithAttachmentProcessRequest/client:attachmentURI"))", the reason is C:\SOA.txt (The system cannot find the file specified).
Please verify the xpath query.
What could be the problem with the xpath query.

Thanks for your suggestions, but it still does not work.
The following is the error I get when I enter
file:///c:/SOA.txt as my attachmentURI.
XPath expression failed to execute.
Error while processing xpath expression, the expression is "ora:readFile(bpws:getVariableData("inputVariable", "payload", "/client:SendEmailWithAttachmentProcessRequest/client:attachmentURI"))", the reason is c:\SOA.txt (The system cannot find the file specified).
Please verify the xpath query.
I followd the same steps as given in the tutorial 'SendEmailWithAttachment' available under the folder <BPEL_HOME>\integration\orabpel\samples\tutorials\SendEmailWithAttachment.

Errors while trying to compile rdf file on LINUX

hi all,
We are trying to compile rdf file on linux using this command line:
$ORACLE_HOME/bin/rwconverter.sh userid=scott/tiger@dbname batch=no source=test.rdf stype=rdffile dtype=repfile overwrite=yes.
The following errors occured:
REP-0004: Warning: Unable to open user preference file.
REP-3000: Internal error starting Oracle Toolkit.
What's the problem!
plz help.

Hi,
These Metalink (http://metalink.oracle.com) notes might help you:
210795.1 : Troubleshooting Guide for REP-4 error
200474.1 : Comprehensive REP-3000 Troubleshooting and Overview Guide
Navneet.

Error while trying to send Fax

Hi experts,
I am trying to send FAX from my SAP report , i am seeing an error in SOST as 'Message cannot be transferred to node FAX100 due to connection error(Final). Can any one help me to sort it out.
Regards,
Ratheesh BS

Hi
Check the connection from SAP system to node FAXCON. Perhaps the node is not assigned to the correct RFC destination. If so, correct this in Customizing.Otherwise use RFC destination management to check the RFC connection to destination
Thanks
Kamlesh Dubey
Edited by: kamlesh duey on Nov 18, 2009 12:01 AM

Upload Error when trying to send large files with Adobe Send

I am a paid subscriber of Adobe Send and should be able to send up to 2GB of files. I am not able to send even 1GB. I have compressed all files into a .zip folder.
I then tried splitting the files into 2 separate .zip folders at about 500MB each, and still got the upload error again after waiting for the entire file to upload. A lot of wasted time now.
It's not reasonable for me to send all of the files piecemeal to my client.
What is going on?
Thank You!
Dave

Here are some screenshots:

Getting Error while trying to execute SSIS package through sql agent

Hi,
I have created a package in SSIS 2008.
I have created sql Agent job which runs perfectly on my Pc.
I tried to create anew job on another pc which doesnot have SSIS.
When i tried to run the Job,
i am getting folowing error:
Executed as user: LT-MAGFIH$. tion. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 8:51:31 PM Finished: 8:51:35 PM Elapsed: 4.024 seconds. The package execution failed. The step failed.
Please let me now how can i solve.

Hi AjayChigurupati,
I would suggest you check you are install or use the dtexec utility correctly:
On a 64-bit computer, Integration Services installs a 64-bit version of the
dtexec utility (dtexec.exe). If you have to run certain packages in 32-bit mode, you will have to install the 32-bit version of the
dtexec utility. To install the 32-bit version of the
dtexec utility, you must select either Client Tools or Business Intelligence Development Studio during setup.
By default, a 64-bit computer that has both the 64-bit and 32-bit versions of an Integration Services command prompt utility installed will run the 32-bit version at the command prompt. The 32-bit version runs because the directory path for the 32-bit
version appears in the PATH environment variable before the directory path for the 64-bit version. (Typically, the 32-bit directory path is
<drive>:\Program Files(x86)\Microsoft SQL Server\100\DTS\Binn, while the 64-bit directory path is
<drive>:\Program Files\Microsoft SQL Server\100\DTS\Binn.)
For detail information, please see:
http://technet.microsoft.com/en-us/library/ms162810(v=sql.105).aspx
To using SQL Server Agent to Run a Package, please refer to the steps in th article below:
http://technet.microsoft.com/en-us/library/ms138023(v=sql.105).aspx
If you have any feedback on our support, please click
here.
Elvis Long
TechNet Community Support

Error while trying to import .dmp file in oracle

Hi,
I am trying to import a .dmp file using impdp command. Whenever I try that I get following error logs:
Import: Release 10.2.0.1.0 - Production on Wednesday, 27 July, 2011 19:22:18
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=HIST_IR_APR_2011.dmp
Processing object type TABLE_EXPORT/TABLE/TABLE
ORA-39083: Object type TABLE failed to create with error:
ORA-00439: feature not enabled: Partitioning
Failing sql is:
CREATE TABLE "DBO"."HIST_IR" ("IR_ID" NUMBER(9,0), "ELS_ID1" NUMBER(9,0), "ELS_ID2" NUMBER(9,0), "ZONE_ID" NUMBER(2,0) NOT NULL ENABLE, "TYPE" NUMBER(2,0) NOT NULL ENABLE, "START_TIME" DATE NOT NULL ENABLE, "END_TIME" DATE NOT NULL ENABLE, "ROAD_NAME" VARCHAR2(50) NOT NULL ENABLE, "UP_POINT" NUMBER(4,2), "DN_POINT" NUMBER(4,2), "UP_LINK_ID" NUMBER(9,0) NOT NULL ENABLE, "DN_LINK_ID" NUMBER
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
ORA-39112: Dependent object type OBJECT_GRANT:"DBO" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
ORA-39112: Dependent object type OBJECT_GRANT:"DBO" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
ORA-39112: Dependent object type OBJECT_GRANT:"DBO" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
ORA-39112: Dependent object type INDEX:"DBO"."INDX_HIST_IR_LOC_TYPE" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
ORA-39112: Dependent object type INDEX:"DBO"."INDX_HIST_IR_ROAD_NAME" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
ORA-39112: Dependent object type INDEX:"DBO"."INDX_HIST_IR_ELS_ID1" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
ORA-39112: Dependent object type INDEX:"DBO"."PK_HIST_IR" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
ORA-39112: Dependent object type INDEX:"DBO"."INDX_HIST_IR_START_TIME" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
ORA-39112: Dependent object type CONSTRAINT:"DBO"."PK_HIST_IR" skipped, base object type TABLE:"DBO"."HIST_IR" creation failed
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 10 error(s) at 19:22:21
Any idea how to get rid of the errors ?
BR///
Tayyab

I also tried to open the .dmp file using Oracle 11g Enterprise Edition but kept getting following errors:
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** dumpfile=HIST_IR_APR_2011.dmp
Processing object type TABLE_EXPORT/TABLE/TABLE
ORA-39083: Object type TABLE failed to create with error:
ORA-01918: user 'DBO' does not exist

:: Error : While trying to access the URL through the Apache ::

Hello,
We are getting following error after starting the apache in the file <sid>_error_log
[20/Apr/2009:10:49:04] [Error] SiteMinder Agent
Failed to initialize the message bus.
[20/Apr/2009:10:49:04] [Warning] SiteMinder Agent
SiteMinder agent has encountered initialization errors and will not service requests.
And while accessing the portal we are getting following error
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, www@ep-<sid>.al.sw.ericsson.se and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Apache/2.0.59 HP-UX_Apache-based_Web_Server (Unix) mod_perl/1.99_16 Perl/v5.8.8 DAV/2 mod_ssl/2.0.59 OpenSSL/0.9.8d Server at ep-<sid>.al.sw.ericsson.se Port 443
All the config files seems to be okay.
And on the same Server we have another apache of other system.
But its down still we are facing above issue.
Kindly help
Thank you , Regards,
Girish

Hi Girish,
Do you find out the solution to this issue? We having a similar issue with our Enterprise Portal using Apache and Siteminder Agent?

Not in GZIP format error while trying to unzip the file

I'm using GZIPInputStream in order to read data from zipped file.
It worked perfectly from command line. I have to execute the same code from crontab and it gave me the exception:
java.io.IOException: Not in GZIP format
It tries to check the GZIP_MAGIC number and for some reason failed.
The stack trace I'm getting points to GZIPInputStream constructor.
GZIPInputStream input = new GZIPInputStream( new FileInputStream( fileName));
Any help will be highly appreciated.
Thanks,
Arnold

This may be a little late for you, but I am having the same problem. I am using an encryption package as well. I created input and output streams to wrap my encryption package. (javax.?? has something similar)
Anyway, my algorithm goes: data -> gzip -> encrypt --------- ->decrypt -> gzip ->data
If I used encryption without the gzip everything works fine, and if I use gzip without the encryption it works fine as well. But if I use them in conjuction, bad thing happen.
I copied versions of the GZIPInput and output stream classes from java.util.zip and made my own so I could put in debug code. Then I saw what was happening. GZIP writes a header of 8b1f. It does this by writing a first to 1f as a byte (this is 31 in decimal) and then the 8b (this is 139 unsigned byte or -117 signed byte).
My debug code shows that it writes 31,-117 to the stream, but reads 31,139 when I don't use encryption and 31,-117 when I do. Another strange thing about this, though, is that everywhere I have debug code, this is the only byte that prints out unsigned in my debug messages... When encryption is turned on this same debug message prints -117.
I have no idea why this is happening. To test things some more, I changed my copy of the gzipinputstream to compare this header value with the GZIP_MAGIC number (35615) and with -29921. Now everything works perfectly. There has to be a better solution for this, but I don't know what it is yet.
GZIP_MAGIC is 8b1f sent as two bytes 1f and then 8b, and then shifting the 8b.
-117, using the Integer.toString(-117,16), gives a hex of -75. Using the same methodology as above, we can get -751f which is -29921.
The header check is essentially:
if ((int)readUByte(in) << 8) | (int)readUByte(in) != GZIP_MAGIC)
your screwed
So change this store the value in a variable and compare it to GZIP_MAGIC and -29921 and your problem will disappear.
I am not sure what they were thinking. readUByte is a simple read. There is nothing unsigned about it. There is probably some casting somewhere along here that is causing the error, but nothing I am doing seem incorrect.
Hope this helps. Actually, I hope you have solved your problem by now, but if not,... If you have any insights, I would appreciate hearing them.

Error while trying to move a file from a folder to another

Hi,
I have created an application that processes files. When a file is processed, the application moves it to another subfolder.
I am working on Netweaver Developer Studio 7.2. The application is a standard DC Web Dynpro.
The code used to move the file is the following:
File destFolder = new File(destinationFolder);
if (!destFolder.exists())
     repCible.mkdirs();
if (destFolder.exists()) {
     File fileToMove = new File(parentFolder + "\" + fileName);
     boolean isFileMoved = fileToMove.renameTo(new File(
               destinationFolder + "\" + fileName));
     disp("Etat du déplacement du fichier: " + isFileMoved);
The code is surrounded with a try catch to catch any SecurityException or NullPointerException. None of these exception is caught, and the isFileMoved boolean always return false.
When the destination folder does not exist, it is created but the file isn't moved. Since the files and folders are situated in a network folder, I have tried to implement the exact same code in a stand alone Java application (not WDPJ). The code works fine. What is wrong with my Web Dynpro DC ? Any thoughts ?
Thanks in advance for your help,
Thibault

Problem solved: I used the Scanner to extract data from the files and forgot to close the scanner.
As a result, the file was still processed by thread and could not be deleted or moved !!

Error while trying to access BPEL process through java on localhost

I have a service (CreditRatingService that comes along with install) running on the BPEL engine. Trying to invoke it through java. However, I get an exception. Below is more information. Appreciate any help.
My method
    public String invokeBpel()
      Map payload;
      Hashtable jndi = null;
      try
       String ssn ="1234";
       String xml = "<ssn xmlns=\"http://services.otn.com\">" + ssn + "</ssn>";
        Locator locator;
        locator = new Locator("default","welcome1",jndi);
         IDeliveryService deliveryService =
          (IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME );
          NormalizedMessage nm = new NormalizedMessage( );
          nm.addPart("payload", xml );
            NormalizedMessage res =null;
            try
             res = deliveryService.request("CreditRatingService","process", nm);
            catch(RemoteException oNameEx)
                System.out.println(oNameEx.getMessage());
            payload = res.getPayload();
            System.out.println( "BPELProcess CreditRatingService executed!<br>" );
            System.out.println( "Credit Rating is " + payload.get("payload") );
      catch (Exception e)
        System.out.println("This is the exception" + e);
        System.out.println(e.getStackTrace());
      finally
          return "toPage3";
    }//end method
Exception text
Failed to create "ejb/collaxa/system/DeliveryBean" bean; exception reported "javax.naming.NameNotFoundException: ejb/collaxa/system/DeliveryBean not found
Env
ADF Business Components:10.1.3.39.84
BPEL Designer      10.1.3.1.0 (Build 061009.0802)
CVS Version     Internal to Oracle JDeveloper (client-only)
Java™ Platform     1.5.0_06
Oracle IDE     10.1.3.39.84
Struts Modeler Version     10.1.3.39.84
UML Modelers Version     10.1.3.39.84
Versioning Support     10.1.3.39.84

Hashtable jndi = null;
try
String ssn ="1234";
String xml = "<ssn xmlns=\"http://services.otn.com\">" + ssn + "</ssn>";
Locator locator;
locator = new Locator("default","welcome1",jndi);
this implies to be in the same initial context then the bpel engine, whicuh you cannot be as long as you are not either part of the ejb code of orabpel or a child of it. and if you are you can use the Locator API without the jndi properties.
hth clemens

Error while trying to send soap request with Altova

Hello,
I m getting this error, can anyone help me please?
ERROR org.apache.axis2.transport.http.AxisServlet - java.lang.NullPointerException

With so little information, I doubt anyone will be able to help you out. Altova forums could be better place to lookout for the solution.

Error while trying to send a file through XI to SAP R/3 based OLTP system

Similar Messages

Maybe you are looking for