Error while tyring to do Delta Load

Hi Friends,
I have created a custom datasource and have made it delta capable by adding a date field in the generic delta option. The datasource shows that it is delta enabled.
However when I go to RSA3 and try to extract the data with any other method other than 'Full', it is giving me an error.
When I try to use a infopackage to load using the delta init, it keeps giving me a message that delta cannot be done on this.
Can anyone please throw more light on this..? I am clueless.
Thank You for your time.
lz70d7

Hey slow down. Currently there is a problem assigning the points and they are fixing it... Check Bhanu's thread or this is the link about...
Forum Points Status ...
~ Vaishnav

Similar Messages

'User is Locked' error while trying to start initial load

While trying to start initial load of objects using R3AS, I am receiving error msg 'User is locked'. This rfc user is a dialog user with SAP_ALL. I even tried replicating using a new user, but ended up with same error. The user is not locked but still getting the same error msg via status 'SYSFAIL' in the queue. Any suggestions?
Thnx,
- AJ.

AJ,
The RFC user must be a <b>communication user or a system</b> user. I think you mentioned the RFC user is a dialog user, which would be wrong settings definitely.
Also as mentioned by Marcin, ensure the passwords in the RFC destination of SRM and R/3 are the same as the passwords in SU01 of the respective systems. To ensure this, click on remote logon for the RFC destination in SM59. If the screen doesnot change, this means your systems are connecting through the RFC user without any problem.
Please assign points, if answer is usefull !!
Sundeep

Error while using Rule file in loading data into Essbase through ODI

Hi Experts,
I am facing problem while loading data into Essbase. I am able to load data into Essbase successfully. But when i used Rule fule to add values to existing values am getting error.
test is my Rule file.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot put olap file object. Essbase Error(1053025): Object [test] already exists and is not locked by user [admin@Native Directory]
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_HSP_RATES "HSP_Rates",C2_ACCOUNT "Account",C3_PERIOD "Period",C4_YEAR "Year",C5_SCENARIO "Scenario",C6_VERSION "Version",C7_CURRENCY "Currency",C8_ENTITY "Entity",C9_VERTICAL "Vertical",C10_HORIZONTAL "Horizontal",C11_SALES_HIERARICHY "Sales Hierarchy",C12_DATA "Data" from PLANAPP."C$_0HexaApp_PLData" where      (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
#stmt.setFetchSize(srcFetchSize)
stmt.setFetchSize(1)
print "executing query"
rs = stmt.executeQuery(sql)
print "done executing query"
#load the data
print "loading data"
stats = pWriter.loadData(rs)
print "done loading data"
#close the database result set, connection
rs.close()
stmt.close()
Please help me on this...
Thanks & Regards,
Chinnu

Hi Priya,
Thanks for giving reply. I already checked that no lock are available for rule file. I don't know what's the problem. It is working fine without the Rule file, but throwing error only when using rule file.
Please help on this.
Thanks,
Chinnu

Connection Refused Error while running AS ABAP Initial Load

All,
I've never connected SAP NW IdM to an actual SAP system before, and I feel like I'm missing some obvious step of configuration, but I can't figure out what.
We are in the process of trying provision user accounts to our SAP ABAP systems. My first step was to try to read all of the existing accounts from the ABAP system:
Our Basis team created me a Communication user with the proper authorizations (I ensured that the authorizations included in SAP_BC_SEC_IDM_COMMUNICATION)
I created a repository using the SAP NewWeaver AS ABAP (Specific Application Server) Repository Template (No CUA, No SNC) using that user's credentials
I then used the Job Wizard and used the job template AS ABAP - Initial Load, specifying my repository above.
When I run the job I get the following:
Initializing SAP connection with parameters:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server failed Connect_PM MSHOST=<IPADDRESS>, R3NAME=<SID>, GROUP=PUBLIC LOCATION CPIC (TCP/IP) on local host ERROR partner not reached (host <IPADDRESS>, service sapms<SID>) TIME Wed Jun 01 13:54:36 201 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -10 MODULE nixxi_r.cpp LINE 8840 DETAIL NiPConnect2 SYSTEM CALL SiPeekPendConn ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
Error Init failed
I'm running SAP NW IdM 7.1 SP5 on Windows Server 2003 with MSSQL 2005. The ABAP server is on a UNIX box with an Oracle 10.2 dB.
Is there additional configuration that needs to take place on the ABAP side to accept the connection?
I've tried to find documentation on this, but have been unsuccessful. If someone could point me to the correct documents, or at least point me in the right direction for troubleshooting, it would be greatly appreciated.

Ankur,
Looks like the endpoint URL of the webservice is not updated and still pointing to the localhost. Try changing it to http://<ip_addres_of_your_server>:7101..... and see if it works fine then.
-Arun

Error while loading Delta

Hi,
I have loaded in process chain a ODS in Delta, the load was not successfull it went in error stating that : "The last delta load is still running; no new request possible" and so i deleted the request from manage. But still its showing the same information when i open the infopackage.
wat can be done to load the data in Initialize Delta Process.
Regards,
Poomagal.

Hi Poomagal,
This is due to mismatch in the Delta Queue.
u might have missed a delta before this request which has failed. Its stating that "The last delta load is still running; no new request possible". This means that there is a previous request which has not loaded in the target.
Just check in PSA or in DataSource Manage tab whether there is request which has not been loaded in the target.
If u find any request then load that request first and then repeat the failed request.
U need to make the QM Status manually red even if its red in RSMO as well as in Manage tab of the target before deleting the request from the target. and then when u start the info package it will give a pop up as Repeat of last delta again. If it doesnot give then it wont bring the delta load which has failed.
Thanks,
Nagesh.

SQL Loader error while loading a date field

Hi,
I am getting the below error while I am trying to load a table with a date field using SQL Loader
Record 1: Rejected - Error on table RPT_HOST_USAGE, column USAGE_TIMESTAMP.
ORA-01861: literal does not match format string
My input file is as below
<code>
Host_Usage_ID,Host_ID,Technology_ID,Environment_ID,Usage_Timestamp,Avg_CPU_Pct,Avg_Memory_MB,CPU_Spike
1,12,1,8,'2009-08-01 00:00:00',0.000000000,23875.000000000,0.000000000
<code>
My Loader.ctl is
<code>
OPTIONS (SKIP=1)
load data
infile 'C:\rpt_Host_Usage.txt'
into table RPT_HOST_USAGE
fields terminated by ","
HOST_USAGE_ID,
HOST_ID,
TECHNOLOGY_ID,
ENVIRONMENT_ID,
USAGE_TIMESTAMP,
AVG_CPU_PCT,
AVG_MEMORY_MB,
CPU_SPIKE
<code>
I have tried options like USAGE_TIMESTAMP TO_DATE(USAGE_TIMESTAMP,'YYYY-MM-DD HH24:MI:SS') but didn't work...
Can you please tell me how to resolve this issue?
Any pointers on this will be helpful
Thanks
Mahesh

I went back and looked at some of my old *.ctl files and I did something simlilar to what you mentioned and it worked for me, but I had surrounded the option in double-quotes and included a colon in front of the item. Example:
TECHNOLOGY_ID,
ENVIRONMENT_ID,
USAGE_TIMESTAMP "to_date(:USAGE_TIMESTAMP,'YYYY-MM-DD HH24:MI:SS')",
AVG_CPU_PCT,
AVG_MEMORY_MB,
....

Error while upgrading .soln from VS2005 to VS2010 ultimate

I am getting following error while doing mentioned work
Cannot load the project due to a corrupt project file. The following error has occurred during XML parsing: File: E:\nirajcvs\mh\build.nt_m64\build\secwrapper.vcproj Line: 371 Column: 5 Error Message: System error: -2147154677. The file 'E:\nirajcvs\mh\build.nt_m64\build\secwrapper.vcproj'
has failed to load.
Conversion Report - build\secwrapper.vcproj:
Converting project file 'E:\nirajcvs\mh\build.nt_m64\build\secwrapper.vcproj'. Web deployment to the local IIS server is no longer supported. The Web Deployment build tool has been removed from your project settings.
This application has been updated to include settings related to the User Account Control (UAC) feature of Windows Vista. By default, when run on Windows Vista with UAC enabled, this application is marked to run with the same privileges as the process that
launched it. This marking also disables the application from running with virtualization. You can change UAC related settings from the Property Pages of the project.
Failed to upgrade platform 'Pocket PC 2003 (ARMV4)'. Please make sure you have it installed under '%vctargetspath%\platforms\Pocket PC 2003 (ARMV4)' VCWebServiceProxyGeneratorTool is no longer supported. The tool has been removed from your project settings.
Attribute 'Detect64BitPortabilityProblems' of 'VCCLCompilerTool' is not supported in this version and has been removed during conversion.
Attribute 'Detect64BitPortabilityProblems' of 'VCCLCompilerTool' is not supported in this version and has been removed during conversion.
Failed to upgrade 'Debug|Pocket PC 2003 (ARMV4)'. Please make sure you have the corresponding platform installed under '%vctargetspath%\platforms\Pocket PC 2003 (ARMV4)'
The project configuration dimension name/value "(Platform, Win32)" was not found in the project manifest. Project upgrade failed

Hi Niraj,
Please refer to this blog:Visual Studio 2010 C++ Project Upgrade Guide.
http://blogs.msdn.com/b/vcblog/archive/2010/03/02/visual-studio-2010-c-project-upgrade-guide.aspx
"2)
Make sure you have the required platforms installed before doing upgrade
Converting a project on a machine without all the available platforms for the project will result in a conversion error. For example, if you try to convert a project
with Itanium Platform on Visual Studio Professional SKU, which does not support the Itanium platform, you will see a conversion error like the following:
Failed to upgrade 'Debug|<Itanium>'. Please make sure you have the corresponding platform installed under '%vctargetspath%\platforms\Itanium'.
Cannot load the project due to a corrupt project file. The following error has occurred during XML parsing:
File: D:\Sample\ConsoleApp\ConsoleApp.vcproj
Line: 28
Column: 5
Error Message:
System error: -2147154677.
The file 'D:\Sample\ConsoleApp\ConsoleApp.vcproj' has failed to load.
This is by design as the conversion needs to evaluate the properties in the missing platforms to do a successful conversion. You can verify which platforms
are installed on your machine by looking in the following directories: %ProgramFiles%\MSBuild\Microsoft.cpp\V4.0\Platforms (or %ProgramFiles(x86)%\MSBuild\Microsoft.cpp\V4.0\Platforms on x64 machine) for the Platforms installed on the machine. "
Also please try to Open the project/solution files in a text editor and manually remove the references to the platform "Pocket PC 2003 (ARMV4)".
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Delta Load failure from ODS to Cube

Experts,
After CRM upgrade, I had to reinitilized the delta process. In this, I reloaded ODS with first init delta without data and then delta load with new data created in CRM. This worked good so far. After this when I tried to load cube with init. delta without data, no issues. But delta load from ODS to Cube doesn't work. Does anybody have any suggestions, please?
Thanks,
Nimesh
Following error observed in Status for delta load from ODS to Cube.
Error when transferring data; communication error when analyzing
Diagnosis
Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
therefore probable that an error arose in the data transfer.
With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
It is possible that no connection exists to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection of the source system for errors and check the
authorizations and profiles of the remote user in both the BW and
source systems.
Check th ALE outbox of the source system for IDocs that have not been

Hi,
As far as i understood, you have successful deltas' loading to the ODS and you want to update entire ODS data to the Cube followed by daily delta's.
If this is the case,
Make sure that you have active update rules exist between ODS and Cube.
First goto your ODS and right click and select option 'Update ODS data in data target'.
Select Init update > IT will take you to the init info package where you select init <b>with data transfer</b> (Init with data transfer will bring all the records from ODS to Cube)
Once init is completed ,you can schedule to load delta's regularly form ODS to Cube by following the same steps.
Hope this helps
Praveen
Message was edited by:
Praveen Vujjini

Error while implementing Delta Load

Hello Experts,
I need your help.
I am trying to extract data from SAP R/3 to BI system.
The R/3 system contains data from 1999-2008 fiscal year. I extracted data for fiscal yr 2007,2006 and 2005 successfully and created a delta info package
In the delta info package I didn't specify any fiscal year limit under the Data selection tab.
I started a background job which needs to run daily. Now my issue is the load came up with an error stating time limit exceeded. I believe the number of data packets exceeded. The request showed a warning sign and it got stuck there. I tried to delete that request and consequently delete the whole delta info package and creating a delta package freshly.
But when I tried to start the process of extraction, the following message popped up. Please tell me what I need to next.
Init. select. for field name currently running in request REQU_464F7XQP5TZIEJPIS0MUV32IB
Message no. RSM1070
Diagnosis
Init. selection for field name with the 'From value' and the 'To-value' , is currently running in request REQU_464F7XQP5TZIEJPIS0MUV32IB.
Procedure
Wait until the init. selection is completed; check the load status in the Monitor.
Thank you. Appreciate your help.
Raj

Hello guys,
I tried to delete the delta request by right clicking on the infopack and hitting manage, and then selecting the particular request and hitting delete.
But when I tried to create a new infopack and initialize it it constantly gave me the same error saying that I need to delete the previous request.
There is another place where you need to delete the request from.
You need to double click on the delta infopackage and on the top menu click on
Scheduler > Initialization options for Source System > Now select the particular delta request and delete it.
This solves the problem and helps you to reintialize the delta load using the new delta infopackage

Error while loading a Cube in BW - "Waiting for Semaphore"

Hello Experts:
I seem to be having a frequent problem while doing a Delta load from BW (3.5) cube to exactly similar cube in BI 7.0.
The load is done daily via a Process Chain. Before doing the Delta load, I also have a step to DELET Index from the
cube in BI. The Delta loads have been successful but frequently they take about 7 or 8 hours to load. The number of
records are not many 80,000 to 140,000 records range. There have been successful loads for similar range withing
7 or 8 minutes. However, when it gets hung up it takes 7 or 8 hours.
Looks like it is a Lock happening in 3.5 BW system. Tcode SM12 shows that it is locked and then in T. Code SM66, it
shows that it is hun for resources..... The message inicated is "Waiting for Semaphore". After about 7 hours, the load
automatically happens.
This is causing issues becuase the upward data loads don't happen and Users can not access the data until late afternoon
for their planning in BPC.
Is there a way this error or Waiting for Semaphore be avoided or time is reduced....? How can I achieve this? Any
fne tuning tricks anyone can suggest please......!!
Thanks a lot in advance.

Thanks to both of you.... ppreciate the feedback. I guess, I will have to wait for the situation to arise again as today's delta went normally. I will see if this happens again. I am not sure whether the Semaphore number is same as the "Work Process Number" in SM66 (which was 3 in my case) or is it the Process ID (which is 22872082 in my case).
If I go to SM50, I shoudl find either the Process ID then.
Would I be searching for the OSS notes corresponding to Process ID (in this case 22872082...? or would it for sempahore number (if it is different .... as I mentioned 3 in my case..?
Could you please clarify which is Semaphore number and if it is same as the process ID I am talking about so that I can search for the right OSS notes.
Also, finding all this will only tell me why it hung.... but is there a way we can make it kick off and not get stuck or I have to wait it out until the resources get released.....? Which in my case then would stil be a wait for 6/7 hours!!
Apreciate your feedback.
Best..... Lee

Error while loading .....!!!

Hi All,
I am getting error while loading POS Data i.e 0RT_PA_TRAN_CONTROL..
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Error is: Update mode When Others is not supported by the extraction API
Long Text:
Update mode When Others is not supported by the extraction API
    Message no. R3011
Diagnosis
    The application program for the extraction of the data was called using
    update mode When Others. However, this is not supported by the InfoSource.
System Response
    The data extraction is terminated.
Procedure
    Check for relevant OSS Notes, or send a problem message of your own.
And also Please can anybody tell me what is the Update Mode i have to use in BI7 if our Data Source being loaded in other target with Delta Upload..?
Your help will be appreciated..
Regards,
Kiran Telkar

Hi,
Caller 09 is basically Memory related error. Ask your BASIS to increase the size.
Also check in the error log, the user ID u r using should have the proper authorization.

Error while loading from DTP

Hi,
We are facing some issue while loading the data from R/3 to BW using DTP.
We are getting the error (both for full and delta)as follows:
Data package 1:Errors during Processing
*     Extraction datasource*
*     Filter out new records with same key.*
*     RSDS material*
*     Update to datastore object*
*          Unpack data package*
*          Exception in substep:write data package*
*          Processing terminated.*
*     Set technical status to red*
*     Set overall status to red*
*     Set overall status to green*
*     Further processing started*
*     Set status to u2018Processed furtheru2019*
The expansion of the error Exception in substep: write data package:
Record 0, segment 0001 is not in teh cross-record table
Error while writing error stack
Record 0, segment 0001 is not in the cross-record table
Error in substep update to DataStore Object
We are using both start routine and end routine in the transformation.
Any help on this is highly appreciable.
End routine:
    IF NOT RESULT_PACKAGE IS INITIAL.
      SELECT salesorg comp_code FROM /bi0/psalesorg
      INTO TABLE it_salesorg
      FOR ALL ENTRIES IN RESULT_PACKAGE
      WHERE salesorg = RESULT_PACKAGE-SALESORG
      AND objvers = 'A'.
      SELECT /bic/ZMATRTUGP FROM /bic/pZMATRTUGP
      INTO TABLE it_mat
      FOR ALL ENTRIES IN RESULT_PACKAGE
      WHERE /bic/ZMATRTUGP = RESULT_PACKAGE-/bic/ZMATRTUGP.
      it_data[] = RESULT_PACKAGE[].
    ENDIF.
get company code from salesorg for all material
    LOOP AT it_data INTO st_data.
      w_tabix = sy-tabix.
      READ TABLE it_salesorg INTO st_salesorg
      WITH TABLE KEY salesorg = st_data-salesorg.
      IF sy-subrc = 0.
        st_data-comp_code = st_salesorg-compcode.
        MODIFY it_data FROM st_data INDEX w_tabix.
      ENDIF.
    ENDLOOP.
    REFRESH RESULT_PACKAGE.
    RESULT_PACKAGE[] = it_data[].
*Finally check for each material if something has changed since the last
*loading : if yes compare and update, otherwise no upload
    IF NOT it_mat[] IS INITIAL.
      SELECT * FROM /bic/azalomrtu00
      INTO TABLE it_check
      FOR ALL ENTRIES IN it_mat
      WHERE /bic/ZMATRTUGP = it_mat-zmaterial.
    ENDIF.
    DELETE it_check WHERE salesorg IS INITIAL.
    CLEAR st_result_package.
    LOOP AT RESULT_PACKAGE INTO st_RESULT_PACKAGE.
      READ TABLE it_check INTO st_check
      WITH TABLE KEY
      /bic/ZMATRTUGP = st_result_package-/bic/ZMATRTUGP
      CUST_GRP4 = st_result_package-CUST_GRP4
      SALESORG = st_result_package-SALESORG
      VALIDTO = st_result_package-VALIDTO.
      IF sy-subrc = 0.
*If one of the characteristic is different, let that entry in the
*result_package otherwise no use updating it
        IF st_check-/BIC/ZCSBRTUGP = st_result_package-/BIC/ZCSBRTUGP
        AND st_check-/BIC/ZCONDTYPE = st_result_package-/BIC/ZCONDTYPE
        AND st_check-comp_code = st_result_package-comp_code
        AND st_check-/BIC/ZCNT_RTU = st_result_package-/bic/ZCNT_RTU
        AND st_check-VALIDFROM = st_result_package-VALIDFROM.
          DELETE RESULT_PACKAGE.
        ELSE.
*entry is new : let it updated.
        ENDIF.
        DELETE it_check WHERE
              /bic/ZMATRTUGP = st_result_package-/bic/ZMATRTUGP
      AND CUST_GRP4 = st_result_package-CUST_GRP4
      AND SALESORG = st_result_package-SALESORG
      AND VALIDTO = st_result_package-VALIDTO.
      ENDIF.
    ENDLOOP.
*if some entries are in the ODS but not in the datapackage, they have to
*be deleted in the ODS since they don't exist anymore
    LOOP AT it_check INTO st_check.
      CLEAR st_result_package.
      st_result_package-/bic/ZMATRTUGP = st_check-/bic/ZMATRTUGP.
      st_result_package-CUST_GRP4 = st_check-CUST_GRP4.
      st_result_package-SALESORG = st_check-SALESORG.
      st_result_package-VALIDTO = st_check-VALIDTO.
      st_result_package-recordmode = 'D'.
      APPEND st_result_package TO RESULT_PACKAGE.
    ENDLOOP.
Thanks in advance.
Thanks,
Meghana

Hi Meghana
HAve you got an short dump in ST22 transaction ?
If yes, what is it ?
In your routine, maybe you should as well add a counter for index in your loop :
DATA : w_idx like sy-tabix.
When you loop at result_package, do :      w_idx = sy-tabix.
And make :     DELETE result_package INDEX w_idex.
Hope it helps you
Mickael

BW ERROR while doing data loading

1)while doing data load error--Processing data packet- No Data,
2)Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished.
3) Also in some cases there are 0 from 0 records and request is still Yellow i can't delete that too .what option are there to resolve such request.
What can be possible solution.

Hi
First the data is come to PSA?If yes then u r problem is from PSA to Data Target.In this case Manually change the request status to red and then delete load the data.
Second If the data not at come to PSA also then check in RSA3 whetehr Data avialble or Not.If it is Delta load then check the entries in RSA7.
Regards
Ram.

Error in delta load activation

Hello every one,
we have generated generic data source and assigned delta on Shipment number with lower limit 10.
when we loaded data through initial load it got all the records from R3 and scheduled delta (suppose to get 0 records because no data was generated ), Delta is bringing 6 records with it and getting error while activating in ODS due to duplicates.
1.How these 6 record came from with out generating data in R3..
2.while activating it is showing error by saying below message
>System error occurred (RFC call)
>Key value exists in duplicate (Not allowed by the ODS object type)
>Activation of data records from ODS object ZODSNAME terminated
>No confirmation for request ODSR_4APQX0IG5LKYJX8248G9QB314 when activating the ODS object ZODSNAME
>Request REQU_4APPPJ630P70EWTMMY686TTSO , data package 000001 incorrect with status 5
>Request REQU_4APPPJ630P70EWTMMY686TTSO , data package 000001 not correct
>Inserted records 1- ; Changed records 1- ; Deleted records 1-
If i am not clear ..please ask i am ready to give required inputs
Please through some light so solve this issue and to load delta properly with out error.
Thanks in Advance
Sandy

Hello Praveen,
Appreciate for your reply....
we created the Data source from View
and the activated the Delta with Numeric pointer where the lower limit was 10 and the upper limit was empty
Then replicated and started loading init first and delta next.
correct me if i am wrong.
Thanks
Sandy

Error in delta load activation in ODS

Hello every one,
we have generated generic data source and assigned delta on Shipment number with lower limit 10.
when we loaded data through initial load it got all the records from R3 and scheduled delta (suppose to get 0 records because no data was generated ), Delta is bringing 6 records with it and getting error while activating in ODS due to duplicates.
1.How these 6 record came from with out generating data in R3..
2.while activating it is showing error by saying below message
System error occurred (RFC call)
Key value exists in duplicate (Not allowed by the ODS object type)
Activation of data records from ODS object ZODSNAME terminated
No confirmation for request ODSR_4APQX0IG5LKYJX8248G9QB314 when activating the ODS object ZODSNAME
Request REQU_4APPPJ630P70EWTMMY686TTSO , data package 000001 incorrect with status 5
Request REQU_4APPPJ630P70EWTMMY686TTSO , data package 000001 not correct
Inserted records 1- ; Changed records 1- ; Deleted records 1-
If i am not clear ..please ask i am ready to give required inputs
Please through some light so solve this issue and to load delta properly with out error.
Thanks in Advance
Sandy

Hello,
1. The records may be due to Safety delta interval you have maintained in your generic datasource. In RSA7, you can check STAT column for your data source. Click on the Pointer for Generic delta. you would see Shipment Number from which next delta would be pulled it.
2. Have you unchecked "Do Not Check Uniqueness of Data" in your DSO. This may be the cause for activation failure as same records are coming in as per the safety interval maintained.

Error while tyring to do Delta Load

Similar Messages

Maybe you are looking for