Error with 0REPORT_DEFAULT_TEMPLETE web templete

Hi,
I am trying to use 0REPORT_DEFAULT_TEMPLETE to publish all my reports in WAD and create IViews for portal.
When i executed a report in web which binded to 0REPORT_DEFAULT_TEMPLETE i am getting below error
Web Item Report error: Parameter REPORT for the report Web item in the Web template is empty or missing
Web template error in specifications for the Web item report
Parameter REPORT for the report Web item in the Web template is empty or missing
Use the BEx Web Application Designer to add parameter REPORT to the report Web item in the Web template, and assign a report name to the parameter
Contact your system administrator; this error was recorded
Please advise on how to proceed
Thanks

Thanks for your suggestions. I found the log but don't know what it means. Can anybody help?
System.ArgumentOutOfRangeException: startIndex cannot be larger than length of string. Parameter name: startIndex
at System.String.InternalSubStringWithChecks(Int32 startIndex, Int32 length, Boolean fAlwaysCopy)
at Microsoft.Office.DocumentManagement.MetadataNavigation.PerLocationViewManager.HumanReadablePath(SPList list, Guid fieldId, String uniqueNodeId, String pathDelimiter)
at Microsoft.Office.Server.WebControls.MetaDataNavTree.TreeViewDataBound(Object sender, EventArgs e)
at System.Web.UI.WebControls.BaseDataBoundControl.OnDataBound(EventArgs e)
at System.Web.UI.WebControls.HierarchicalDataBoundControl.PerformSelect()
at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationContext.OnTreeViewLoad(SPTreeView spTreeView)
at Microsoft.Office.Server.WebControls.MetaDataNavTree.PerLocationPageLoad()
at Microsoft.Office.DocumentManagement.Pages.ColumnDefaultsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

Similar Messages

"no serializer is registered..." error with a web service not working

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

There is an error with your web service settings that cannot be repaired automatically. Please Contact Product Support

I get the above error message (in the title of this post) when I try to setup my remote website. When I try to access the remote website, I receive the error message below.
Please let me know what I need to do to correct the error. Thanks!
When accessing my remote website on Windows Server 2012 Essentials, I receive the following error message:
Server Error in '/' Application.
Could not load file or assembly 'Wssg.Web.Internal, Version=6.2.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'Wssg.Web.Internal, Version=6.2.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Source Error:
The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL:
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
  <%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
<configuration>
   <system.web>
       <compilation debug="true"/>
   </system.web>
</configuration>
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Wssg.Web.Internal, Version=6.2.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'Wssg.Web.Internal, Version=6.2.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.]
Microsoft.WindowsServerSolutions.Web.RootSite._Default.InitializeCulture() +0
ASP.default_aspx.FrameworkInitialize() +42
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +68
System.Web.UI.Page.ProcessRequest() +119
System.Web.UI.Page.ProcessRequest(HttpContext context) +99
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +913
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +165
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.18447
Thanks. Paul Carvajal

I'm not getting a return - my server name is Beast - is this correct?
Get-ChildItemcert:\localmachine\my
|where{$_.Subject-eq
"CN=$env:BEAST"}|foreach{$_.Thumbprint}
Thanks. Paul Carvajal

SOAP Response Version Mismatch error with SAP web service

My company just recently upgraded to SAP CRM 7.
The old way of creating web services in SAP worked fine, but now, there is something a bit off with SAP. When I call the web service the send returns a Fault Event with the error : SOAP Response Version Mismatch
I had a simple web service created with only 1 text input and 1 text output to make sure that it wasn't the parameters or return type. I got the same error.
Searching on the forum or the web hasn't provided with any good answer to the issue.
Any thoughts on this?

Problem solved

Errors with Test Web Service in Java Studio Creator...

Hi...
I'm a newbie with web services. I've installed Java Studio Creator in my Win XP Pro environment and I've been following the tutorials on how to add a web service to my projects, etc...
In any case, I've followed the steps to ensure that my Deployment Server and my Built-In Database Server are active, yet whenever I try to test any of the pre-packaged, built-in web services, I always get the following type of error:
InvocationTargetException
com.sun.rave.websvc.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:459)
com.sun.rave.websvc.ui.TestWebServiceMethodDlg$MethodTask.run(TestWebServiceMethodDlg.java:1031)
java.lang.Thread.run(Thread.java:595)
null
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
com.sun.rave.websvc.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:450)
com.sun.rave.websvc.ui.TestWebServiceMethodDlg$MethodTask.run(TestWebServiceMethodDlg.java:1031)
java.lang.Thread.run(Thread.java:595)
HTTP Status-Code 404: Not Found - /OrderService; nested exception is: HTTP Status-Code 404: Not Found - /OrderService
webservice.orderws.OrderService_Stub.getCustomers(OrderService_Stub.java:327)
webservice.orderws.orderws.OrderWSClient.getCustomers(OrderWSClient.java:50)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
com.sun.rave.websvc.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:450)
com.sun.rave.websvc.ui.TestWebServiceMethodDlg$MethodTask.run(TestWebServiceMethodDlg.java:1031)
java.lang.Thread.run(Thread.java:595)
HTTP Status-Code 404: Not Found - /OrderService
com.sun.xml.rpc.client.http.HttpClientTransport.checkResponseCode(HttpClientTransport.java:302)
com.sun.xml.rpc.client.http.HttpClientTransport.connectForResponse(HttpClientTransport.java:252)
com.sun.xml.rpc.client.http.HttpClientTransport.invoke(HttpClientTransport.java:88)
com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:92)
webservice.orderws.OrderService_Stub.getCustomers(OrderService_Stub.java:311)
webservice.orderws.orderws.OrderWSClient.getCustomers(OrderWSClient.java:50)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
com.sun.rave.websvc.ui.ReflectionHelper.callMethodWithParams(ReflectionHelper.java:450)
com.sun.rave.websvc.ui.TestWebServiceMethodDlg$MethodTask.run(TestWebServiceMethodDlg.java:1031)
java.lang.Thread.run(Thread.java:595)
Can anybody give me a clue as to what I've missed? I was under the impression that Java Studio Creator had everything it needed to be able to successfully test these web services. What it looks like to me, is that the actual web service package is not deployed to the development environment. I have no idea where I would find those, if they were not pre-packaged with the software. Any assistance would be greatly appreciated.
Thanks,
Brett

Are you to see the WSDL using the URL on a browser?
Check for proxy settings configured in the IDE.
http://developers.sun.com/prodtech/javatools/jscreator/reference/faqs/technical/webservices/proxies.html
-Sakthi

[JSR-172 Web Services] Error with some web services

hello
I m trying to use jsr172 with multiple services find at Xmethods.com
- I choice only doc/litteral wsdl types ----> OK
- use of the J2ME Wireless Toolkit Stubs Generator ---> OK
- use the service stub generated to invoke the service -------> NOT OK
Some services runs correctly, but lots of service methods throw a java.rmi.MarshalException: Missing SOAP Body or Envelope
i.e: http://www.closerfar.com/dic2.asmx?WSDL
--> this has a method which return a definition of a word by a complex type
When I use the TryIt function in Xmethods.com, it's run!...
.... but not in my midlet
Can you help me
thanks
ludo

I have written a dot net/ c# Web Services doesn't fully work with J2ME client - it too throws the same exception, with the exception text being "Missing SOAP Body or Envelope"
a) c# web service works with c# WIndows Client (local & remote web service)
b) c# web service works with J2ME client - when the Web Service is local
c) c# web service FAILS with J2ME client - when the Web Service is remote
error/exception:
"Missing SOAP Body or Envelope" -- This occurs at the point of invoking the remote Web Service
Speculation:
a) dot net Web Services are "different" from Java Web services - yet it works fine in local mode
b) error is a misnomer & there is some other problem, perhaps fixable thru Web.config changes remotely??
- changed Web.Config authentication (from Windows to none), but this made no difference
- changed back to default web service namespace of tempuri.org, but this made no difference

Error with the web url

Hi,
I am loading flat file data using web. After giving url i am getting the foll error:
BSP error in ICF node
Certain ICF nodes must be released in transaction SICF for the BSP extension HTMLB
Check the following ICF nodes as described in SAP Note 517484.
/sap/bc/bsp/sap/system
/sap/bc/bsp/sap/public/bc
/sap/public/bsp/sap/public/bc
/sap/public/bsp/sap/system
/sap/public/bsp/sap/htmlb
/sap/public/bc
/sap/public/bc/ur
How to rectify this.
thanks in advance.

Hi Prasad,
First please check if the service (/sap/public/bc/ur) is active. If it is then try the following steps,
1. Go to transaction SE38.
2. Execute the service, W3_PUBLISH_SERVICES
3. This publishes the ITS services. This is because sometimes after a patching for instance, the ITS services need to be executed manually.
Do try the things above mentioned steps and let me know if it works in your case.
Best Regards,
Richin Mathew
Message was edited by:
Richin Mathew

Error with web service SRT: Unexpected failure in SOAP processing occurred:

Hello,
I get the following error with a web service
"SRT: Unexpected failure in SOAP processing occurred: ("No configuration for this HTTP server instance")"
Any ideas on how to solve this ?
Thanks.
Regards, Michel

Hi,
I think the WSDL file shared with you and the soap message you are getting are a mismatch.
Try to check the soap message xml format and see if matches the ouputs tags structure in WSDL file.
Thanks & Rgds,
Aditya

Error with SQL syntax

I'm trying to get onto a website i could normally get into but all it says is this
you have an error in your SQL syntax;check the manual that corresponds to your MySQL server version for the right syntax to use near') and adlx.'action' != 2' at line 1
I'm not good with computers and I've never heard of this i need some help, I may just be stupid but i seriously need some help here
preferably instructions for a hp computer

This looks to be an error with the web site you are visiting, not a problem with your PC. I suggest you contact the web site owner. The error suggests a problem with programming against a MySQL database, which is not a Microsoft technology.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer w

I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

Licence Error while Using nqcmd with Analytics Web DSN

Hi,
While running nqcmd with Analytics Web DSN i am getting a DataDirect error, stating that you do not have appropriate licence to run ODBC Data Direct.
I am getting this on Linux box but while running the same on Windows their is no such error.
Have any one of you got such kind of stuff. I am using OBIEE which Oracle provides on her website for free for development purpose.
Please help.
Edited by: RKK on Oct 3, 2011 10:01 PM

Hi,
kindly Refer
https://forums.oracle.com/forums/thread.jspa?messageID=2289534&#2289534
Thanks
Deva

Error when refreshing WEBI report with Universe Connection Type "SSO"

Hi Experts:
We are trying to refresh the Webi report in Infoview with Universe Connection set as "Use Single Sign On when refreshing the report at view time", so that we can leverage SAP OLAP authorization variable from Bex Query which the Universe is built on.
However got the error of "incomplete logon data" after all the configurations done following below blogs:
SNC Part 1
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-1-of-2
SNC Part 2
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-2-of-2
We already have Win AD SSO to SAP setup, and in BO CMC, Win AD user is mapped to SAP user ID.
The SNC settings are:
- AD Account: service.test.bobj (all lower-letters)
- 32-bit gsslib on the BO server, and 64 bit on the BW server side.
- SNC0: p:service.test.bobj at DOMAIN
- SU01 --> BO_Service ; SNC: p:service.test.bobj at DOMAIN
- Entitlement system tab --> username: BO_Service
SNC Name: p:service.test.bobj at DOMAIN
- SNC settings tab:
SNC Lib: c:\winnt\gsskrb5.dll
Mutual Authentication settings: p:SAPServiceBP0 at DOMAIN
In CMC, the role can be imported if "RFC activated" option unchecked in SNC0.
I found a few threads on the same topic, but they are all not answered:
SNC Client side configuration error
SNC Configuration Error: Incomplete logon Data
Can you please provide details of the solution if you have impleted a same scenario successsfully, or any thoughts to help the investigation?
Thanks in advance!
Regards,
Jonathan

Hi Ingo,
Sorry for taking so long to reply, we are trying to set up server side trust and enable SSO; but we still couldn't success.
What we did is:
1. We followed installation guide chapter 6, generate certificate and PSE, etc. All looks good.
2. Then we still have the "incomplete logon data" error when refreshing webi report after logon using Windows AD user ID.
3. Then we trace the PFC connection, the log is as below. We checked several BO notes, e.g. 1500150, 1461247.. The part bothers us is that we even don't have URI displayed in the log when system trying to use SNC, and we couldn't get more info on this which make us very difficult to diagnosis.
Can you please help? Thanks a lot!
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SNC. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Unable to authenticate using SNC because the URI does not meet the minimum connection requirements.
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SSO. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: The SAP SSO authentication process will fail because the SAP secondary credential are not properly updated and the password is blank.
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Trying to connect to SAP using this URI : occa:sap://;PROVIDER=sapbw_bapi,R3NAME=PB0,GROUP=BI_Group1,MSHOST=sapaupdb04,LANG=en,CLIENT=100,CATALOG="ZSPUM602",CUBE="ZSPUM602/ZSPUM602_Q50"
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Calling m_pRfcWrapper->RfcOpenEx() ...
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: RfcOpenEx(...) returned 0
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Call to m_pRfcWrapper->RfcOpenEx() took 0.141 seconds
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: SAPAuthenticationService::~SAPAuthenticationService

An error occurred while trying to communicate with the web browser.

I have opened a PDF in the Acrobat reader V 8.2.4. It has live links.
Only the FF browser is open.
When I click a link in the PDF, I successfully get the message 'The document is trying to connect to...' which I allow and then successfully hyperlink to the web page displayed in FF.
When I click an image in the PDF, which has a url attached to it, I get the message 'An error occurred while trying to communicate with the web browser.'
[Sorry to say in IE7 when I click the image, I hyperlink to the web page like I do when I click the link.]
Question is: What setting or other step do I need to take with FF so when I click the image in the PDF I link to a web page like I do when I click the link in the PDF?
Thank you!

Your above posted system details show outdated plugin(s) with known security and stability risks.
# Adobe Shockwave for Director Netscape plug-in, version 10.2
# Adobe PDF Plug-In For Firefox and Netscape 8.2.4
# Shockwave Flash 10.0 r22
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Adobe Reader]] plugin to the latest version.
*http://get.adobe.com/reader/otherversions/

Safari cannot open the page ~ The error was: "There was a problem communicating with the web proxy server (HTTP)

Help! I was cruzing along just fine and went out tonight only to receive the message above:
Cannot open Page
Safari cannot open the page
The error was: "There was a problem communicating with the web proxy server (HTTP)."
I have had all the Apple iPhone phone. Have never encountered anything like this.
All systems are GO as soon as I log on to wifi.
Can anyone help, please.

I am also fixed. I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
I went to:
Settings
Wifi
I selected the network I was working on by hitting the blue arrow located on right side
At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
I was on Off and changed it to Auto and it worked!
I was soo jazzed!!
Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
YIPPIE!! I'm a new man!!
Go to settings -----> WI-FI -----> select the network you're using ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.
--------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO. Note: if you're already at AUTO, change it to "Manual" and make your Port = 80.

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)
I followed Technet articles to configure SiteMailBoxes in our environment & exchange sever.
When we created Sitemailbox in a SiteCollection &when we try to open it, it failed with below error.
Site Mailbox
We are having trouble connecting to Exchange Server
The server might be temporarily unavailable. Please check back on this page in a few minutes. If this problem persists, please contact your system administrator.
Correlation ID: bb0fe99c-6f4e-e084-b191-881fbf0fa977, Error Code 10
ULS Log (503 error)
Autodiscover Diagnostics Response Headers: request-id: 95d12ceb-283e-4495-b28b-256503fd097c client-request-id: 742fe69c-ef5a-e084-ca05-6098c759c584 X-CalculatedBETarget: devapwxyz01a.devap.mydomain.com X-FEServer: DEVNAABCD01B
Content-Length: 0 Cache-Control: private Date: Tue, 03 Feb 2015 18:53:40 GMT Set-Cookie: X-BackEndCookie=; expires=Sun, 03-Feb-1985 18:53:40 GMT; path=/autodiscover; secure; HttpOnly Server: Microsoft-IIS/8.5 X-AspNet-Version:
4.0.30319 X-Powered-By: ASP.NET
742fe69c-ef5a-e084-ca05-6098c759c584
if I am correct, X-CalculatedBETarget supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com. Do you guys have any idea on this? (I verified
the same using fiddler, it is failing right at autodiscover.svc call.)
I wrote a powershell script to connect autodiscover service in sharepoint server & this web service call able connect right server X-CalculatedBETarget. It gave the expected response.
I am not sure why SharePoint webservice call (X-CalculatedBETarget) is going to different server?
let me know if you guys have any ideas.
Thanks.

Thanks for the Response Raj.
I already followed the same instructions in the Links.
When SharePoint Autodisover.svc webservice send a request to Exchange server & Exchange server redirecting that request to different server, this is the problem i am facing right now.
X-CalculatedBETarget
supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com.
Let me know if you have any suggestions?

Error with 0REPORT_DEFAULT_TEMPLETE web templete

Similar Messages

Maybe you are looking for