Error with BPM

I am working on a Scenario in which XI is receving a soap message using soap adapter and passing it to BPM Engine but i get following error in message monitoring.
I have a abstract inteface by name MI_FileIn which is used in the BPM. in the Receive step
I get following error in the call adapter step.
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="3" type="T">determined process: WF task WS90100002</Trace>
<Trace level="1" type="T">No mapping property with name sap.bc.bmt.wfm.xi.interface.synch.http://cvx_file_transfer.com:MI_FileIn</Trace>
<Trace level="1" type="T">MI_FileIn really used in process?</Trace>
</Trace>

Hi Suraj,
Thanks for the reply,
1) When you created your wsdl which interface have you specified? It should be Outbound Interface(Not the Abctract one).
Here i am using a soap adapter to receive a soap message not a proxy genrated using usdl. So dont think this is an issue.
2) Check whether your BPM is active in SXI_CACHE (return code should be 0).
I have checked it in the transaction SXI_CACHE return code is 0 and also it is using active version of the Integration process
3) See whether you have used MI_FileIn in the first receive step.
Receivs step is the first step in the the Integration process and it is marked as start step.
4) Check your Sender Agreement.
 i will check it and let you know

Similar Messages

Oracle Buisness Rule error with BPM

Hi
I am trying to invoke a buisness rule from a BPM flow
The rule works fine when tested independently using a test function from Jdeveloper which invokes the corresponding rules decison_service.The rule takes input and output of xml type.The facts are created and rule doesnot have any validation errors.
However when invoked from BPM , I get the below error:
Non Recoverable Business Fault :
Fact not found in the rule engine working memory, rule session execution failed. The rule session 10006 failed because an instance of the fact com.bt.nat.wsi._2005._06.grant.BES could not be found in the working memory of the rule session. This is most likely a rule modeling error. The decision service interaction expects the fact instance to exist in the working memory of the rule session. Check the rule actions in rule designer and make sure that a fact of the expected type is being asserted. If the error persists, contact Oracle Support Services. 10006
Please help.

Assuming BES is your output type, you need to ensure that every path thru your rules results in "assert new BES".
Here are some next steps for you:
1. you can turn on tracing in the rules SE to see what rules are firing,
2. you can use a decision table and ensure there are no gaps,
3 you can use a low priority (advanced mode) rule that looks something like this:
IF
there is no case where (
BES is a BES
THEN
assert new BES(/* default property values */)

Error in file2file with bpm

iam trying to do file2file scenario with bpm
file is picking up from input and does not put in output.
adapters is working fine for this.
i got an error that "no object found for this message"
in sxi_cache return code is 99
in swf_customizing----
there is some error in like "error loading hr control data".
where it went wrong.plz provide solution.

Hi,
First do the Cache refresh and then try it once.
Go throgh the following links , it may solve your problem
BPE_ADAPTER error on async BPM
BPM (IP) Error: "No object type found for this message [...]"
No object type found for this message
Regards
Sridhar Goli

IDoc to Soap, with BPM - Permanent error in BPE inbound processing

Hi Experts,
IDoc to Soap, with BPM - > Permanent error in BPE inbound processing
How to rectify this any issue???
Thanks-
sk

Hi,
The inbound processing encountered a permanent error and the queue therefore stopped.
The error message "Permanent error in BPE inbound processing" may be caused by the following:
- At the start or when you process a process instance, the inbound processing encounters an exception that was not handled. This exception is triggered, for example, by a transformation step, a synchronous send step or a control step but it was not caught in an exception handler branch. If the exception that was not handled occurs in the first transaction of the started process instance, the system does not write the process instance to the database but it sets the queue that has this error message to the error status.
Refer to the help in Note 1082099
- The inbound processing triggers this error if the correlation evaluation shows that a message should be delivered to a process instance that has the status "error". Since delivery to process instances that contain errors is not permitted, the queue is stopped.
Use the simulation of the message delivery in the detail view of the relevant queue LUW to determine the relevant process instance for the affected message and use transaction SXMB_MONI_BPE "Continue Process Following Error" (or transaction SWF_XI_SWPR) to continue. If you cannot continue the process instance, check whether you can logically delete the instance. In this case, use the method that is described in Note 807906 to logically delete a process instance.
Check whether your system contains other process instances that have errors in order to detect similar problems. Use transaction SXMB_MONI_BPE "Continue Process Following Error" or transaction SWF_XI_SWPR.
Use the report RSWF_CRL_MAINTAIN to check all of the correlation instances in question or the relevant process instances that you can reach using "Display Work Item".
- Messages that cannot be delivered because no correlation instance can be found may lead to the error that is mentioned here. Check whether the causes that are outlined in Note 1094028 affect your case.
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful.

Error while registering essbase 11.1.1.2 with BPM architect

hi
i working on hyperion 11.1.1.2
when I am trying register essbase with epm "From Enterprise View, right-click the Analytic Servers node and select Register Analytic Servers with BPM Architect."
I am getting error that says "No servers available to register with BPM-Architect"
But I have the servers which are registered with HSS
thanks
bharat

Version mismatch will lead to this type of error but not sure about version 11.1.1.2.
Mink

UNKNOWN MESSAGE error in BPM

Hi,
I have transported scenarios in production.
One of the scenario with bpm is working fine.
But in one scenario i am getting the error

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
In trace i found
could not create BPE proxy for message, no XML object definition found for message 48965DEB190A41F3355AC0B710EA2106</Trace>
</Trace>
in sxi_cache the return code is 0 , but still i activated it and still the return code was 0.
but still i get the above error.

Hi,
Where you are facing this issue? In PROD or QA?
Did you tried to remove the locks, and re-activate it? I would say go to SM12 in Abap stack and check what's the corresponding object got locked! But before doing it, please let us know that u r not doing this in PROD. Coz, I don't want to suggest you this approach in PROD.
raj.

Sync/Async brdige error in BPM

Hi,
I am working on RFC-TO-Webservice scenario(Synchronous) and I am using the BPM in this scenario.
In BPM just I have used 2 steps.
Receive - Opened Sync/Async bridge
Send - Synchrouns step
Send - Cloase the Receive step
Send - Asynchrous send step (to send the response to the file...).
When I sent my RFC message from R/3 I am getting following error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Timeout condition of pipeline reached</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
I am using PI 7.0 SP13 is why I am not able to receive the Sync message in BPM...I have created the abstract interface based on RFC...getting the first message itself Timeout error.
I am trying to use Sync/Asnc bridge in BPM. First message itself PL_TIMEOUT error..bpm is not able to receive my rfc request...
I need help on this...do I need to do any settings in WEBAS level..I did Timeout setting in SXMB_ADM.
Regards,
Venu.

hi,
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
check this blog..and same thing I did in my scenario
my scenario is RFC-TO-Webservice.
Sync/Async bridge can't we use like this ...Receiver step(open sync/async)-> Send(Synchronous)-Send(Close sync bridge)....that way can't we use ...
I am not able to receive the RFC request itself inside my BPM first step...getting the Timeout error.
But when I use the RECEIVE STEP with Asynchronous mode..I am able to receive the message inside my bpm.Incase of Synchronous I am not able to receive the message..
I am working PI 7.0 and SP13..did any body worked this version...
Thanks,
venu.

File to idoc with BPM

Hi All,
I have one File to IDoc Scenario. Now I want to throw posting error in a file.
i.e., if mapping goes not well and when IDoc is being sent to Recipient system then if any posting error is encountered, then a file(Flat file) will be created at sending system side.
I am planning to design this scenario with BPM. Now end user requires a akwoledgement for this scenario eithere it may be succsess or failure in file format. If succsess the file will be created with succsess information(any format), either failure also file will be created with error information. The user requires only file format b'coz this file will be read by another java application (user didn't require to his mail).
Can anybody suggest the solution for this:
1. How to generate aknowledgement file for sucsess or failure.
2. How to use this file to idoc scenario in BPM with out using Alert configuration or Mail adapter.
Regards,
Konala.

Hi,
As you know Idocs are used for asynch communication, only was to get acknowledgemnet is using ALEAUDIT. For your scenario there can be one work around. When you post IDoc in the, in that function module after the posting is done call one more RFC with the the success/failure message which will trigger RFC to File sceanrio.
If you get any other solution, please post it back to same thread.
Thanks,
Prateek

Permenant error in bpm inbound processing error in inbound queue of pi7.1

Hi Experts,
In E filling scenario in SAPPI7.1, iam facing a problem. i.e In sxmb_moni message monitoring, the message was schedule at outbound side.when i extend that, the message was stuck in smq2 with "permenant error in bpm inbound processing".can any one please tell me how to relove this issue.
Thanks & Regards,
Giri.

Hello
Check the note #1126656 BPE-TS: Permanent errors in the BPE inbound processing. This describes some possible causes and solutions for this error.
Regards
Mark

BPM problems on PI (XI 7.0) - internal error - Does BPM work in PI for you?

Hi guys!
This is the 2nd time I get into the troubles with BPM on PI. On XI 3.0 I had never problems. But on PI when I use BPM I get following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Es ist ein interner Fehler aufgetreten</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
SAP:Stack tag means in english: An internal error has occured.
My scenario is:
Idoc sent from R/3
Mapping to Integration Process (BPM) inbound interface format
Message receiver in Int Proc (start of BPM)
sync call to web service (inside Int Proc)
web service response sent out from BPM (end of BPM)
mapping of ws response to target structure (idoc)
Idoc sent to r/3
I don't know, what could be wrong. In SXI_CACHE I have return code 0 for this Integration Process, so it should be ok.
Any ideas? Does BPM work in your PI environment?
Thanx a lot foro help!
Olian.

hi,
>>>>Any ideas? Does BPM work in your PI environment?
of course it does
it might mean that your installation was not done properly (or XI configuration during installation) but it has nothing to do with BPM
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Help: : Error in BPM (FILE to FILE)

Hi All,
I am trying out a file to file scenario using BPM and i'm following the blog "/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
But after the file gets picked up, the process fails in the call adapter step.
I see the mapping is done properly.
How to solve the issue?
And In SXMB_MONI I see the following steps are processed successfully.
Inbound msg -> receiver grouping -> Response.
and the process fails at "Call adapter" (No specific error as such, but the flag for Call Adapter is displayed as "Arrow Mark (->)" i.e Transfer to process engine.
Please find the call adapter's trace below.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XI</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-05-22T08:25:54Z EST</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 95D7D260E96C11DAB2CD001438BD2DC3</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0007</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0007</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XI</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-05-22T08:25:54Z EST</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO30__0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XI</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-05-22T08:25:54Z EST</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="1" type="T">Interface Mapping http://abc.com/F2FBPM IM_F2F_BPM</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV" />
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV" />
- 
</SAP:Trace>
Thanks
Ajay
Message was edited by: Ajay Kumar V
Message was edited by: Ajay Kumar V

Hi
I have worked on the same weblog.But its workin properly for me.I think your problem is in receiver determination.
You hav to create two receiver determination and 1 sender agreement and receiver agreement each.Please check it out.
Regards
Victoria.

Block1 (No agent) Error in BPM ?

Hi friends ,
 I am trying the the BPM scenario using Integration Process
BpmPatternCollectTime
from SAP BASIS ® SAP BASIS 7.00 in the namespace http://sap.com/xi/XI/System/Patterns
I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
I am using a File Sender Adapter and Receiver Adapter .
It is Successfully picked up the File but nothing is happening after that .
I am using two receiver Determination one from Ob to IP and other from IP to FIleReceiver ( IB) .
But, I am Getting error as Block1 (No agent) Error in the PE graphical diagram
I have checked in SWWL my Integration Process Return code is "0"
Can you please tell tell me how to solve this ?
Can you please tell me this scenario is like Multiple Purchase Order Items to One Purchase Order
Here they have given ID adn OverAllNumber . For ex. In one xml file I am sending
ID as A100
OverAllNumber as 120
next 5 minutes putting the another file with contents
ID as A100
OverAllNumber as 130
My Question is
Will TWO files wiil come as Output in File Receiver ?
 I am Clear in this please give some suggestions
Best Regards.,
V.Rangarajan
Best Regards.,
V.Rangarajan

Hi,
 Thanks for your reply.
 once the files are connected in the transformation step you will use a N:1 mappping.
 Yes , i have done as same . I have set deadline as 15 minutes .
My doubt is
 if N:1 
First File
ID as A100
OverAllNumber as 120
next 5 minutes putting the another file with contents
SecondFile
ID as A100
OverAllNumber as 130
 Then what will be the output ?
 will it be like this
 ID as A100
 OverAllNumber as 130
 I am not clear in this Please tell me !
 If possible please give some suggestion to clear this Block1 (No agent) Error in BPM ?
Regards.,
V.Rangarajan

Error in BPM: FIle to RFC

Hi friends,
   I am working on File --> RFC ---> File Scenario using BPM ...
Here I am getting system error in BPM and showing broken red brick in workflow at sender1 ...
I have given like this...
Start --> Receiver ->sender1>Sender2 ---> Stop.
I have given properties... for each
C2 = Abstractinterface FIleResponse_Abs
Recevier
1)Step Name = Receiver
Message   = C1 (I defiend in container Category =Abstact interface type = FileRequest_Abs)
Start process = (Selected)
Mode = Asynchronous
2)Sender1
Step name = Sender1
Mode =Synchronous
Synchronous Interface = FileRequest_AI
Request Message= C1
Response Message=C2
3)Sender2
Step Name =Send2
Mode = Asynchronous
Message = C2
After Configartion,I have placed the sender sample XML in Server ...it is picking up properly.But
it showing error while it was executing in the BPM. Please suggest me what i have to do.
If you didnt understand I ll give some more details.
Pls help me in this regard.
With Regards,
Raju.

I am getting error in Integration Engine.....
Attribute     Value
Engine     Integration Engine
Status     System Error
Repeatable     No
Cancelable     No
Start     20.06.2007 06:25:22
End     20.06.2007 06:25:22
Sender Party
Sender Service     BPM_FILE_RFC_SAGAR
Sender Interface     http://File2RFC_Syn
FileRequest_AI
Receiver Party
Receiver Service     ECCIDOC800
Receiver Interface     urn:sap-com:document:sap:rfc:functions
BAPI_SALESORDER_GETLIST
Quality of Service     Best Effort
Error Category
Error Code
Message     9BA7365DDBC0FE49B9F512F7308DDA53
Reference

Data Streaming error in BPM workspace

Hi All
Developed a BPM Process and ADF form with BPM 11g suite and deployed to Oracle weblogic Server 10.3. while we are fetching the data from DB into ADF form in the same Process we are getting the small amount of data but while fetching the large volume of data to that ADF form we are getting the popup like "Data streaming",
Could you please guide me to resolve this issue.
Thank you
Balaji J

Please paste the exact error stack along with your Jdev version for us to help you.

Problem in simple filetofile scenario with BPM

Hi
I am a starter to XI. I am implementing simple file2file scenario with BPMs.
But I am getting error while looking into SXMB_MONI.
Under "Monitor for Processed XML messages"
Number of XML message Found 3 (which is my input 3 xmls which is fine) but
"Status is RED Flag".
"Error Category: BPE_ADAPTER"
"Error ID: UNKNOWN_MESSAGE".
Please help me out with this problem.
Regards
Sam

Hi Raj,
When i click PE getting following error:
"Unable to perform action for selected message".
When i double click the row, it takes me to xml message versions where i can RED FLAG for "Call Adapter". In the trace i foudn the below at the end:
<trace level =1 type=system error> error exception return from pipeline processing"</trace>
Hope this helps to guide me mroe
sam

Error with BPM

Similar Messages

Maybe you are looking for