Error with Oracle temp file after Offline restore

Hi,
I did a offline backup of my Oracle 9I database after shutting down the DB. After I restore the offline file system backup, I saw the following error in alter.log:
"ORA-01186: file 255 failed verification tests
ORA-01122: database file 255 failed verification check
ORA-01110: data file 255: '/oracle/SED/sapdata1/temp_1/temp.data1'
ORA-01205: not a data file - type number in header is 0
File 255 not verified due to error ORA-01122"
When I did a query I got the following error :
"SQL> select * from dba_temp_files;
select * from dba_temp_files
ERROR at line 1:
ORA-01187: cannot read from file 255 because it failed verification tests
ORA-01110: data file 255: '/oracle/SED/sapdata1/temp_1/temp.data1'
I know how to recover it but Why is this so ? Is this normal when I restore the offline backup file including the temp.data1 ?
Any reply is appreciated.
Rgds,
WP

Because you did something wrong.
This is just one more brilliant laser beam example of why RMAN is the only tool that should be used for backup and recovery once you are on 9i or higher versions.

Similar Messages

Recover offline files after offline restored

I have a user that had offline files turned on. Some time later that server crashed and was replaced with a new one.
The user still had offline files turned on and it would fail to sync with the crashed server. The user still was saving files to her offline folder. Then we turned off offline folders and pointed it to the correct server. Now all the files
that were being saved during the time the server was gone are also gone. So my question is. Are those files lost or are they on the local computer hard drive and can they be recovered with a utility like csccmd?
thanks
Kris
Kris Da San Martino

Michael,
Select a clip in the Browser that is Offline.
Right click and choose the Reconnect to Media.
Navigate to to the real clip on your Scratch Disc.
The real clip is on the Scratch Disc.
FCE is non-destructive which means that everything in the Browser and Timeline are links to the Real clips stored on the Scratch Disc.
That's why when something like a clip name is changed outside of FCE the LINK is broken. FCE does not know the identity of the changed clip and where to find it. Reconnecting creates a new link (file path).
Al

Deployment Manager Error with Oracle Weblogic Server 10.3.1

I have installed Identity Manager 9.1.0.2 (patch upgraded from 9.1.0.1) on OEL 5.3 64bit and Weblogic 10.3.1
Database:Oracle 11gR2 (remote machine).
**I am aware that IM 9.1.0.2 is not certified on Weblogic 10.3.1 (it is only certified on 10.3),
The installation was successful and OIManager is up and running. Able to create Users, Resources etc. as well.
As part of configuring OIM Connectors tried to Import .xml file using Import option from Deployment Management section as below and the following error was displayed.
"Either your session timed out or you are trying to access a page without logging in".
Did all workarounds like enabling java, changing browsers, restarting machine etc as per the below discussion but in vain.
Deployment Manager Error with Oracle Weblogic Server
Can any one suggest any workaround or solution for this problem.
Or atleast can any one confirm there is no Identity manager available on this date which is compatible with 10.3.1? and cannot be continued further.
Thanks in Advance
Sudheer
Edited by: SudheerPrabhala on Oct 20, 2009 1:26 AM

You are facing this issue because you're using a non certified combination.
Other folks who tried to use OIM in 10.3.1 ended up in the same problem you're facing.

ORA-24816 error with oracle 10 driver

Friends,
I am getting the following error with Oracle 10 driver while trying to insert data > 4k into a LONG column. The table also contains another column of type varchar2(4000). The code works perfectly fine with Oracle 9i driver.
ORA-24816: Expanded non LONG bind data supplied after actual LONG or LOB column
Kindly let me know if this is a programming error or a driver problem.
Thanks,
Vinay

this driver you mentioned, is it the jdbc driver?
ORA-24816:     Expanded non LONG bind data supplied after actual LONG or LOB column
Cause:     A Bind value of length potentially > 4000 bytes follows binding for LOB or LONG.
Action:     Re-order the binds so that the LONG bind or LOB binds are all at the end of the bind list.
using this forum may be more efficient -> http://forums.oracle.com/forums/forum.jspa?forumID=99&start=0

Working with bootstrap css file after opening the browser

working with bootstrap css file after opening the browser when i came back on working on bootstrap my computer started hanging and opning new tabs and showing message " A caused the program to stop working correctly.Windows will close thoe program and notify you if solution is available"

Hi Geetha,
1.) button problem:
i don't know how you open the form - when you do it with a XML file maybe you packed the wrong XML file into your addon installer.
2.) the flickering can be a problem of formatted searches or interacting with other addons.
when addon a. changes a field it can be that addon b. does something because of the event from addon a.
the same can happen when you have formatted searches that do something when a field changes.
ok - that are my last tipps for this day
good night
David

Error Opening Oracle Terminal File fmrweb.

I installed 9IAS portal and the forms/reports server. The portal works fine, but when I try the 'Run Form Web ( runform.htm)' I get an error "Error opening Oracle*Terminal file fmrweb." The file does exist in my c:\oracle\806\forms60 directory and my FORMS60_PATH is set to c:\oracle\806\forms60 as well. Anybody having ( had ) similar problems? Note: 8.1.7, portal, and formsserver installed on the same Win 2000 machine. No Oracle apps. Thanks in advance.

Hi Christian,
It's probably working because you're now using fmrweb.res instead of the foobar fmrwebdk.res. Just look out for that missing quotation mark :)
--Jesper

Oracle Temp Files

Hi,
I have a Space Problem on C drive of my Oracle Application Tier. C drive has only 111 MB space which cause my application very slow. On investigating the C drive i found that C:\Documents and Settings\oracle\Local Settings\Temp contain 3 GB of data.
Can any body tell If i Delete that oracle temp files it will not cause my application to stop work.
Regards,
Awais Riaz

find $ORACLE_BASE -name "*.trc"
find $ORACLE_BASE -name "*.log"
--MM

Can I update with a CAB file after I installed BizTalk ?

Can I update my base configuration of BizTalk with a cab file after everthing is installed and configured ?
I missed installing it while I was installing BizTalk for the first time, now I want to update it with a CAB file. Is that possible ?

Hi,
BizTalk Server relies on different products and technologies to provide essential services and features. CAB file contains softwares that are required by BizTalk server to
successfully install on your computer.
You can select the cab file based on the edition and server you working with. Link below:
Redistributable CAB Files
Now coming to your question, as I have mentioned above the CAB file contains the
prerequisites
required for successful installation of BizTalk. While installing BizTalk on Redistributable
prerequisites
screen you must have either manually or automatically installed the CAB file already.
If you have already successfully installed and configured BizTalk, I dont see any issue with the CAB file.
I don't buy that 90% consumption of the CPU is due to bad or wrong CAB file selected while installing BizTalk.
I would advise you to go through the below link:
What you need to do to prepare for and install BizTalk Server
Rachit

PeopleSoft 8.53 Integration Error with Oracle SES

My System Details are :
Machine 1
Hostname : host1
Port : port1
Application : PeopleSoft 8.53 + HCM 9.2 + Oracle 11g
OS : Windows 7 (64 Bit)
Machine 2
Hostname : host2
Port : port2
Application :Oracle Secure Enterprise Search 11.1.2.2.0
OS : Windows 2008 Server (64 Bit)
No Error was encountered while installation and systems started without any error.
Now when trying to integrate PeopleSoft with Oracle SES.
I entered all the details as per installation docs at PeopleTools->Search Framework->administration->Search Instance
When I click on Ping I encounter the following error :
Ping Test Result: Failure. Exception caught GetMessageText: No default message. (0,0) (262,612)
I am behind a proxy server and have made the required entries in integrationGateway.properties files for proxy server.
Also have added userid:pwd in Proxy-Authorization property for HTTPTARGET connector ID.
The Errorlog.html contains the following error:
Type - Error
ErrorLevel - Standard Gateway Exception
Description - HttpTargetConnector:ExternalApplicationException. External System responded with an Error status.
Exception - PeoplesoftListeningConnector: GeneralFrameworkException
MessageCatalog
MessageSet: 158 MessageID: 10623 MessageParms: HttpStatusCode returned : 407
Stack Trace
com.peoplesoft.pt.integrationgateway.common.ExternalApplicationException: HttpTargetConnector:ExternalApplicationException. External System responded with an Error status.
at com.peoplesoft.pt.integrationgateway.targetconnector.HttpTargetConnector.send(HttpTargetConnector.java:1159)
at com.peoplesoft.pt.integrationgateway.service.BasicConnectorInvocator.execute(BasicConnectorInvocator.java:131)
at com.peoplesoft.pt.integrationgateway.framework.GatewayManager.invokeService(GatewayManager.java:147)
at com.peoplesoft.pt.integrationgateway.framework.GatewayManager.connect(GatewayManager.java:191)
at com.peoplesoft.pt.integrationgateway.listeningconnector.PeopleSoftListeningConnector.doPost(PeopleSoftListeningConnector.java:183)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at com.peoplesoft.pt.integrationgateway.listeningconnector.PeopleSoftListeningConnector.service(PeopleSoftListeningConnector.java:86)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.peoplesoft.pt.integrationgateway.common.IBFilter.doFilter(IBFilter.java:84)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Request
Message-ID: <1975883609.1375092327640.JavaMail.userId@host1>
Date: Mon, 29 Jul 2013 15:35:27 +0530 (IST)
Mime-Version: 1.0
Content-Type: multipart/related; boundary="Integration_Server_MIME_Boundary"
Content-ID: PeopleSoft-Integration-Broker-Internal-Mime-Message
PeopleSoft-ToolsRelease: 8.48
--Integration_Server_MIME_Boundary
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Content-Disposition: inline
Content-ID: IBInfo
<?xml version="1.0"?><IBInfo><ExternalOperationName><![CDATA[GETAPIVERSION.V1]]></ExternalOperationName><OperationType>sync</OperationType><From><RequestingNode><![CDATA[PSFT_HR]]></RequestingNode><Protocol>http</Protocol><WS-Security><WSTokenType><![CDATA[]]></WSTokenType><WSTokenEncrypted></WSTokenEncrypted><WSTokenSigned></WSTokenSigned><WSTokenEncryptLevel></WSTokenEncryptLevel><WSRequestAliasName><![CDATA[]]></WSRequestAliasName></WS-Security><SAML-CertAlias><![CDATA[]]></SAML-CertAlias><SAML-QualifierName><![CDATA[]]></SAML-QualifierName><SAML-Issuer><![CDATA[]]></SAML-Issuer><SAML-SubjectName><![CDATA[]]></SAML-SubjectName><SAML-Signature><![CDATA[]]></SAML-Signature><SAML-TokenData>***deleted for security purposes****</SAML-TokenData><URIResourceIndex>-1</URIResourceIndex><SegmentsUnOrder>N</SegmentsUnOrder></From><ContentSections><ContentSection><ID>ContentSection0</ID><ContentType>text/plain; charset=UTF-8</ContentType><ContentTransfer>8bit</ContentTransfer><NonRepudiation>N</NonRepudiation></ContentSection></ContentSections><Connector><ConnectorClassName><![CDATA[HttpTargetConnector]]></ConnectorClassName><ConnectorParameters><ConnectorParam><Name><![CDATA[Method]]></Name><Value><![CDATA[POST]]></Value></ConnectorParam><ConnectorParam><Name><![CDATA[URL]]></Name><Value><![CDATA[http://host2:port2/search/api/admin/AdminService]]></Value></ConnectorParam><ConnectorParam><Name><![CDATA[SOAPUpContent]]></Name><Value><![CDATA[Y]]></Value></ConnectorParam></ConnectorParameters><ConnectorHeaders><Header><Name><![CDATA[sendUncompressed]]></Name><Value><![CDATA[Y]]></Value></Header><Header><Name><![CDATA[Content-Type]]></Name><Value><![CDATA[text/xml; charset=utf-8]]></Value></Header></ConnectorHeaders></Connector><AttachmentSection ResponseAsAttachment="N"></AttachmentSection></IBInfo>
--Integration_Server_MIME_Boundary
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Content-ID: ContentSection0
Content-Disposition: inline
<?xml version="1.0"?>
<getAPIVersion xmlns="http://search.oracle.com/Admin"><credentials xmlns=""><userName>eqsys</userName><password>***deleted for security purposes****</password></credentials></getAPIVersion>
--Integration_Server_MIME_Boundary--
Response
Message-ID: <2136182902.1375092327641.JavaMail.userId@host1>
Date: Mon, 29 Jul 2013 15:35:27 +0530 (IST)
Mime-Version: 1.0
Content-Type: multipart/related;
boundary="----=_Part_8_1450854121.1375092327639"
Content-ID: PeopleSoft-Integration-Broker-Internal-Mime-Message
------=_Part_8_1450854121.1375092327639
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Content-Disposition: inline
Content-ID: IBInfo
<?xml version="1.0"?><IBInfo><Status><StatusCode>40</StatusCode><MsgSet>158</MsgSet><MsgID>10623</MsgID><Parameters count="1"><Parm>HttpStatusCode returned : 407</Parm></Parameters><DefaultTitle>Integration Gateway Error</DefaultTitle></Status><ContentSections><ContentSection><ID>ContentSection0</ID><ContentType>text/plain; charset=UTF-8</ContentType><ContentTransfer>8bit</ContentTransfer><NonRepudiation>N</NonRepudiation></ContentSection></ContentSections></IBInfo>
------=_Part_8_1450854121.1375092327639
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Content-Disposition: inline
Content-ID: ContentSection0
<HEAD><TITLE>Proxy Authorization Required</TITLE></HEAD>
<BODY BGCOLOR="white" FGCOLOR="black"><H1>Proxy Authorization Required</H1><HR>
<FONT FACE="Helvetica,Arial"><B>
Description: Authorization is required for access to this proxy</B></FONT>
<HR>

</BODY>
------=_Part_8_1450854121.1375092327639--
I have checked the required entries in integrationGateway.properties files for proxy server.
Also have checked the userid:pwd entered in Proxy-Authorization property for HTTPTARGET connector ID.
I have restarted the servers and machines as well but still the same error.
Kindly help me ?

RCC wrote:
I agree with Hakan, sounds like your problem is getting to the proxy.
Is the SES server on the same network as PS? Or is it really somewhere else? Is this some kind of home setup since you are running PS on Win 7? If SES is on the same network as PS, I would drop the proxy config and test that way first. Get it working without the extra complexity, then add in Proxy. You can test connectivity from PS to SES with telnet or just browsing to SES.
Thanks for the response RCC.
The PS is a Demo Instance being used for study purpose. Both the machines are on the same network.
I tried the ping after removing the entries in integrationGateway.properties files for proxy server and it worked.
Ping, Test Login and Validate are successful.
I get the following error when I check Proxy Login.
Proxy login failed : Invalid credentials for the federation entity (262,1317) (262,1318)
I have created Federation Trusted Entity key by the name HCM92 on Oracle SES side and am using the same ID and password in the Query Service Credentials on the Search Instance Properties Page.
I was not getting any error in any log file related to this.
Kindly help.

Error opening Project 2007 file after using project 2010

This is the second time I'm experiencing this problem.
Created a file (say Rev 1) in Project 2007 at work and took it home and updated it using Project 2010. When I finished updating using Project 2010, I saved the file in Project 2007 format. Came to work the next day, opened the file using
Project 2007 and did a "Save As" so that I have another revision of the file (Rev 2).
After updating Rev 2 in Project 2007 I closed it but when I came to work the next day I couldn't open Rev 2 file again either in Project 2007 or 2010. This has happened to me with 2 different files.
The error message I get is
An unexpected error occured during command execution.
Try the following:
Verify that all argumen names and values are correct and are of the correct type.
You may have run out of memory. To free up available memory, close programs, projects, or windows that you aren't using.

It seems to me that it has to do something with invalid characters in the file name of the timeline. Or it could be anything from an '&' to two concurrent spaces, mulitple '.' or even a dash (-). Stick with single spaces, letter and
number combinations and you should be fine. The problems arise based on how the file has been opened. Here’s one thread like yours. It could be useful for your, read http://www.filerepairforum.com/forum/microsoft/microsoft-aa/project/625-project-error-“an-import-error-occurred”

XA error with Oracle 9.2.0.x / Weblogic 7 sp2

Hi,
I have encountered some problems when accessing Oracle 9i (9.2.0.2) via
Weblogic7 sp2 .
The problem occurs when a stateless session bean invokes a DAO that get a
connection from the datasource. The SLSB transaction attribute is set to
'required'.
This problem does not when using oracle.driver.OracleDriver or using Oracle
9.0.1.
Please help.
Thanks!
Regards...
<JDBCConnectionPool
DriverName="oracle.jdbc.xa.client.OracleXADataSource"
InitialCapacity="10" MaxCapacity="10" Name="MyConnectionPool"
Password="{3DES}EuCgBGHa7vhKa8GfpTjs4w==" Properties="user=psm"
ShrinkPeriodMinutes="1" ShrinkingEnabled="false"
SupportsLocalTransaction="false" Targets="myserver"
URL="jdbc:oracle:thin:@192.168.142.153:1521:oscdev"/>
<JDBCTxDataSource JNDIName="MyDataSource" Name="MyDataSource"
PoolName="MyConnectionPool" Targets="myserver"/>
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error has
occured in the transaction branch start() failed on resource
'MyConnectionPool': XAER_RMERR : A resource manager error has occured in the
transaction branch
oracle.jdbc.xa.OracleXAException
at oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1157)
at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:295)
at weblogic.jdbc.jta.VendorXAResource.start(VendorXAResource.java:41)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:569)
at
weblogic.transaction.internal.ServerResourceInfo.start(ServerResourceInfo.ja
va:1165)
at
weblogic.transaction.internal.ServerResourceInfo.xaStart(ServerResourceInfo.
java:1108)
at
weblogic.transaction.internal.ServerResourceInfo.enlist(ServerResourceInfo.j
ava:287)
at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTra
nsactionImpl.java:391)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1143)
at
weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1098)
at weblogic.jdbc.jta.Connection.getXAConn(Connection.java:145)
at weblogic.jdbc.jta.Connection.prepareStatement(Connection.java:211)
at
weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.ja
va:139)
at
weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:81
Attached the error log and config.
[apps.log]
[config.xml]

Which version of oracle database are you trying to connect to? we have seen some problems with oracle 920 thin driver. It will be good to use 9013 thin driver instead for now.
Mitesh
Wee Hong Ee wrote:
Hi,
I have encountered some problems when accessing Oracle 9i (9.2.0.2) via
Weblogic7 sp2 .
The problem occurs when a stateless session bean invokes a DAO that get a
connection from the datasource. The SLSB transaction attribute is set to
'required'.
This problem does not when using oracle.driver.OracleDriver or using Oracle
9.0.1.
Please help.
Thanks!
Regards...
<JDBCConnectionPool
DriverName="oracle.jdbc.xa.client.OracleXADataSource"
InitialCapacity="10" MaxCapacity="10" Name="MyConnectionPool"
Password="{3DES}EuCgBGHa7vhKa8GfpTjs4w==" Properties="user=psm"
ShrinkPeriodMinutes="1" ShrinkingEnabled="false"
SupportsLocalTransaction="false" Targets="myserver"
URL="jdbc:oracle:thin:@192.168.142.153:1521:oscdev"/>
<JDBCTxDataSource JNDIName="MyDataSource" Name="MyDataSource"
PoolName="MyConnectionPool" Targets="myserver"/>
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error has
occured in the transaction branch start() failed on resource
'MyConnectionPool': XAER_RMERR : A resource manager error has occured in the
transaction branch
oracle.jdbc.xa.OracleXAException
at oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1157)
at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:295)
at weblogic.jdbc.jta.VendorXAResource.start(VendorXAResource.java:41)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:569)
at
weblogic.transaction.internal.ServerResourceInfo.start(ServerResourceInfo.ja
va:1165)
at
weblogic.transaction.internal.ServerResourceInfo.xaStart(ServerResourceInfo.
java:1108)
at
weblogic.transaction.internal.ServerResourceInfo.enlist(ServerResourceInfo.j
ava:287)
at
weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTra
nsactionImpl.java:391)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1143)
at
weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1098)
at weblogic.jdbc.jta.Connection.getXAConn(Connection.java:145)
at weblogic.jdbc.jta.Connection.prepareStatement(Connection.java:211)
at
weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(ConnectionImpl.ja
va:139)
at
weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.java:81
Attached the error log and config.
Name: apps.log
apps.log Type: Text Document (application/x-unknown-content-type-txtfile)
Encoding: x-uuencode
<?xml version="1.0" encoding="UTF-8"?>

<Domain ConfigurationVersion="7.0.0.0" Name="mydomain">
<Application Deployed="true" Name="DefaultWebApp"
Path="C:\bea\user_projects\mydomain\applications"
StagedTargets="" TwoPhase="true">
<WebAppComponent Name="DefaultWebApp" Targets="myserver" URI="DefaultWebApp"/>
</Application>
<Application Deployed="true" Name="certificate"
Path=".\applications" StagedTargets="" TwoPhase="false">
<WebAppComponent Name="certificate" Targets="myserver" URI="certificate.war"/>
</Application>
<Application Name="poc" Path="D:\HSA\src\deploy\poc.ear"
StagingMode="nostage" TwoPhase="true">
<EJBComponent Name="poc-hsa_waf-ejb.jar" Targets="myserver" URI="poc-hsa_waf-ejb.jar"/>
<EJBComponent Name="user-ejb.jar" Targets="myserver" URI="user-ejb.jar"/>
<WebAppComponent Name="poc.war/" Targets="myserver" URI="poc.war/"/>
</Application>
<ApplicationManager Name="mydomain"/>
<EmbeddedLDAP
Credential="{3DES}PMLvNRl/VFtDLKDdfidrUP5bYwm+FAcgdR+UXOY0YiY=" Name="mydomain"/>
<FileRealm Name="wl_default_file_realm"/>
<JDBCConnectionPool
DriverName="oracle.jdbc.xa.client.OracleXADataSource"
InitialCapacity="10" MaxCapacity="10" Name="MyConnectionPool"
Password="{3DES}EuCgBGHa7vhKa8GfpTjs4w==" Properties="user=psm"
ShrinkPeriodMinutes="1" ShrinkingEnabled="false"
SupportsLocalTransaction="false" Targets="myserver" URL="jdbc:oracle:thin:@192.168.142.153:1521:oscdev"/>
<JDBCTxDataSource JNDIName="MyDataSource" Name="MyDataSource"
PoolName="MyConnectionPool" Targets="myserver"/>
<JTA Name="mydomain"/>
<Log FileName=".\wl-domain.log" Name="mydomain"/>
<PasswordPolicy Name="wl_default_password_policy"/>
<Realm FileRealm="wl_default_file_realm" Name="wl_default_realm"/>
<SNMPAgent Name="mydomain"/>
<Security GuestDisabled="false" Name="mydomain"
PasswordPolicy="wl_default_password_policy"
Realm="wl_default_realm" RealmSetup="true"/>
<SecurityConfiguration
Credential="{3DES}22b8VM1wFkNwKqrWc093vhUk4XsQKkozia+O7H8K4I602imSpWAOlikFQyDOvETIj6mhrD+D+2/Ays3XL4PM//3Y2/TeWxHb" Name="mydomain"/>
<Server ListenPort="7001" Name="myserver" NativeIOEnabled="true"
ServerVersion="7.0.0.0" XMLEntityCache="XMLCacheMBean_myserver">
<COM Name="myserver"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="myserver"/>
<JTAMigratableTarget Cluster="" Name="myserver" UserPreferredServer="myserver"/>
<KernelDebug Name="myserver"/>
<Log FileName=".\myserver\myserver.log" Name="myserver"/>
<SSL Enabled="true" HostnameVerificationIgnored="true"
ListenPort="7002" Name="myserver"
ServerCertificateChainFileName="ca.pem"
ServerCertificateFileName="democert.pem" ServerKeyFileName="demokey.pem"/>
<ServerDebug Name="myserver"/>
<ServerStart Name="myserver"/>
<WebServer DefaultWebApp="DefaultWebApp"
LogFileName=".\myserver\access.log" LoggingEnabled="true" Name="myserver"/>
</Server>
<XMLEntityCache Name="XMLCacheMBean_myserver"/>
</Domain>

Sqlj runtime error with oracle 10G in Websphere6 or 5.1

We are trying to migrate from oracle 9i to 10G and we are compiled all our sqlj code with codegen = -oracle option.(previously we used to use codegen=-jdbc which for some reason doesnot work).it compiles fine with out any erros.. But when we try to run then get this exception.
java.lang.IllegalArgumentException: SQLJ programs translated with the option -codegen=oracle must be run under Oracle JDBC 9.0.0 or higher. If the Oracle JDBC driver is wrapped, then the wrapper must implement all of the oracle.jdbc.OracleXxxx interfaces. Alternatively, you can translate SQLJ programs either with -codegen=iso. java.lang.IllegalArgumentException: SQLJ programs translated with the option -codegen=oracle must be run under Oracle JDBC 9.0.0 or higher. If the Oracle JDBC driver is wrapped, then the wrapper must implement all of the oracle.jdbc.OracleXxxx interfaces. Alternatively, you can translate SQLJ programs either with -codegen=iso.
at sqlj.runtime.ref.ConnectionContextImpl.getOracleConnection(ConnectionContextImpl.java:167)
at sqlj.runtime.ExecutionContext$OracleContext.prepareOracleStatement(ExecutionContext.java:1397)
We are using ojdbc14.jar that came with oracle 10G.
Hope any one can give any pointers.

I'm having same issue - but I'm having it when I try to invoke a method that contains a database Object type from a Tibco Business Works Process called a Java Method.
How exactly do you do the codegen=iso configuration?
I've tried:
1. Project Properties / Compiler SQLJ and then select from Code Generation drop down iso.
2. From Connections / Database / Navigate to package / right-click / Generate Java / Browse to my custom jpub.properties file where I have tried multiple entries such as (by themselves and in some combination.:
- jpub.codegen=jdbc
- jpub.codegen=iso
- jpub.compatible=9i
- jpub.compatible=8i
- compatible=both8i
- jpub.usertypes=oracle
- jpub.compatible=customdatum
- jpub.compatible=sqlj
I've also played with changing from the default some of the Mapping Options in Connections / Database / Navigate to package / right-click / Generate Java / Mapping Options.
This doc here, says that code should change (section 6 JPublisher Input Files - based on configuration of Input files)
Oracle® Database
JPublisher User's Guide
10g Release 2 (10.2)
B14188-01
No matter what I do, the code that gets generate is the same.
Also, the documentation talks about running things from the command line but how exactly do you do that? Do I need to be in specific directory? I tried the c:\ C:\jdev\system and c\jdev\ and c:jdev\bin and always get error message: 'jpub' is not recognized as an internal or external command, operable program or batch file.
I've built a java client in JDeveloper to successfully call the same method and I don't see the error.
Edited by: disaak on Mar 9, 2010 11:51 AM

ORA-12505 error with oracle 11.2.0.2 RAC Grid

Hi,
We have just installed Oracle 11.2.0.2 with oracle clusterware. Every thing went well during the installation, How ever after install we can not connect to the RAC instance from clients, through jdbc OR oracle sql developer.
We get following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor.
After the installation we created service (myrac) through OEM Cluster Managed Database Services tab. and We are using service name as following:
jdbc:oracle:thin:@orap-cluster.mydomain.com:1521:myrac
Here below is Service TNS string:
myrac = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = orap-cluster.mydomain.com)(PORT = 1521))(LOAD_BALANCE = YES)(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = myrac)))
Any help..??
Cheers

HI,
to clarify:
if you try with
<SERVER>:<PORT>:<SID> you are accessing the server with a database SID, whereas
<SERVER>:<PORT>/<SERVICE> will access a service.
The SCAN Listener only know of services, and not of database SIDs.
This is the reason you should always create separate services for your RAC databases, since only they are registered. If you connect via. a service the listener will forward you to (one of) the corresponding instances servicing the service.
Database SIDs are only known to the local listener on the node (not to the SCAN listener). And SIDs actually should not be used anymore.
However if you still need to access the SID you can use the virtual hostname of the server resp. the VIP address of the server in the connection and this will work:
<VIP>:<PORT>:<SID>
Note the SID of a RAC database is either myrac1 or myrac_1 (depending on administrator or policy managed database).
I still would recommend using services and not SIDs.
Furthermore the SCAN can only be resolved correctly by 11.2 clients.
Any pre 11.2 client should use an address_list containing the SCAN VIPs:
PRE112 =
(DESCRIPTION =
(LOAD_BALANCE=ON)
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.41)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.42)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.43)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = pre112)
If a application server does not understand / then try using the TNSNAMES entry directly:
jdbc:oracle:thin:@(DESCRIPTION = (LOAD_BALANCE=ON)(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.41)(PORT = 1521))(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.42)(PORT = 1521))(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.43)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = pre112)))
Hope that helps
Regards
Sebastian

Error opening Oracle Directory file

My database is Oracle 11g on Linux
I am try to use Oracle Directory file sitting on a Windows Server.
I am getting the following error when trying to access the file.
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
error opening file \\bbsftp01\SSH_Homes\governet/COURSE_ATTR_4891.log
It looks like it thinks the file is sitting on a Linux server and therefore is throwing in the "/" forward slash....Can someone please help me?
Thanks,
Jae

The key phrase here is
I am try to use Oracle Directory file sitting on a Windows Server.
Is Windows interoperable with Linux? Does Linux understand UNC?
Don't think so and don't think so.
Are you using Samba on the Windows Server and did you NFS mount that directory on the Linux server.
If you didn't it is not going to work. Apart from that: Windows can deal with forward slashes so that is not the problem.
Sybrand Bakker
Senior Oracle DBA

Got problems with creating RTF-files after OSX update

Hi
I don't know if this is really a MAC OS problem, but it occurred after I updated to 10.5.2 - so it's a likely suspect.
Since the update I can't create RTF-files any more with Final Draft, my script writing program. A file is created, but when I try to open it I get an error message that it cannot be found. But the file is there: I can see it and click on it. It just won't open.
Only today now I got the same error message with a doc-file I downloaded some months ago.
The only big change I lately made to my Mac was the update to 10.5.2 and I got the new Office 2008 (both are the German versions). Could the problem come from either of them? I contacted Final Draft's support - they didn't know of the problem.
Maybe someone else in this forum has encountered similar problems?

Have you tried to Repair Permissions using Disk Utility?
1. Open Disk Utility in your Applications/Utility folder.
2. Click on the icon for your boot volume.
3. Click on the First Aid tab and select Repair Permissions
4. Click the repair permissions button.
This is the first thing to try whenever any program goes wonky. It's free, but takes awhile for all the files that have to be checked and changed.

Error with Oracle temp file after Offline restore

Similar Messages

Maybe you are looking for