Error with the function module REUSE_ALV_GRID_DISPLAY

Hi,
While using the fucntion module REUSE_ALV_GRID_DISPLAY
I am getting the below error.
Message i407(0k) with l_template_om.
message says 'Contact your system administrator. The following template is missing: sap_mm.123
Kindly provide me the reason why this success message is displayed for this function module.
Vijay

at first its an information message sind its of type I and not of type S which would be success.
this message is beeing displayed because that template is really missing, believe it when SAP talks to you.
So talk to your basis guys.
to come around this problem without talking to your basis guys, i´d propose to use CL_SALV_TABLE or CL_GUI_ALV_GRID to display an ALV.

Similar Messages

System_failure error with the function module HTTP_POST

Hi Friends,
While executing the function module "HTTP_POST" ,sometime we are getting the error "System_Failure" exception.
Can anyone tell what could be the reason for this exception,any configurations need to be done on SAP???
For this FM we are passing the RFC destination"SAPHTTPA" as one of the paratmeter and
The two import paramters we are passing to this FM are
URI :
http://10.74.40.31:8686/ArchiveBridge/?informaticaArchive&contRep=IA&sumFile=MYTA_SUMMARY_20090820063258.sum
Destintion : SAPHTTPA
Thanks all in advance.
Regards
Dharmaraju

Hi,
Check if any proxy is maitained in the client by going into transaction
SICF-> Goto-> HTTP Client Proxy -> HTTP LOG TAB.
If there is anything maintained under Host name and port, if yes you need to specify the IP address while calling FM HTTP_POST
under PROXY as
192.168.0.1:8080 where first part is IP address & 2nd part(8080) is port.
Also test connection for SAPHTTPA under SM59 to see if its properly configured.
Regards,
Amit

Some issue with the Function Module u0093'SKWF_FIND_BY_QUERY' in a BW ECC6.0

Hi All,
Need some urgent help..
Iam facing some issue with the Function Module 'SKWF_FIND_BY_QUERY' in a BW ECC6.0 system.
As shown below, in the function module, the Table IT_PROPERTIES_RESULT gets populated with some values based on inputs like IT_CLASSES, IT_QUERY, and L.
This updation of IT_PROPERTIES_RESULT table is happening for some of the services sent through IT_QUERY and is not getting populated for some.
call function 'SKWF_FIND_BY_QUERY
exporting
CONNECTION_SPACE         =
    OBJ_TYPE                 = 'L'
PTYPE                    =
X_STRICT                 =
IMPORTING
ERROR                    =
     tables
     CLASSES                  = IT_CLASSES
     QUERIES                  = IT_QUERY
     RESULT_OBJECTS           = IT_LOIO
PROPERTIES_REQUEST       = PROPERTIES_RESULT        = IT_PROPERTIES_RESULT.
The values are as follows:-
Values getting populated in IT_CLASSES BW_LO_TRAN               Values getting populated in IT_QUERY 1) BW_QUERY, 2) /BIC/ZSERVICE
I would like to know whether any Standard Customizing BW transaction is present that is maintaining IT_PROPERTIES_RESULT table properties and fetching through this Function Module.
Also, suggest how this issue can be resolved
Thanks & Regards,
Shailesh nagar

Thanks Suhas. That definitely helped.
Also the following links helped.
http://help.sap.com/saphelp_nw70/helpdata/EN/86/1c8c3e94243446e10000000a114084/frameset.htm
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Cheers,
Preethi

Getting error in the function module

Hi everybody.
I have created one function module in se37 and i am calling that function module in the se38 report, when i am executing the report it is throwing me an error.
here in my report i am having the select option fields ex matnr, in the function module importing i have given the parameter matnr over there and when i am running the report it is through an error that
"The function module interface allows you to specify only
fields of a particular type under "MATNR".
The field "S_MATNR" specified here is a different
field type                                                "
IF i am giving the parameter instead of select-options in the report and executing, then the function module is getting triggered and receiving the data what ever the code is available in the source code.
can anyone help me out in this issue so that i can get the data while using the select-option instead of parameter.
Thanks in advance

Hi,
Actually, I wouldn't recommend the use of that tables parameter...
From sap help:
Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
So i definitely would go with either importing or changing parameter...
Cheers,
m.

There seems to be an error in the function module OPEN_FORM obstructing the

Hi,
There seems to be an error in the function module OPEN_FORM obstructing the process.
Some vendors are not cabaple of usinf EDI and for some reason also not willing to use TTOOL solutions (example Hewlet Packard). In those cases the supplier still would like to get purchase order electronically via e-mail. Sending POu2019s via external mail (SMTP) is basically standard function in R/3 that has been possible since the version 4.5. It is not pre-configured, so (almost) all the required elements needs to be configured.
When we send the output message through ME9F t'code i facing the problem in the above FM.
Please help me how to solve this.
Vijay

Got you, the digital display for Cupertino and Frankfurt are wrong too.
Submit feedback:
http://www.apple.com/feedback/iphone.html

Problem with the function module SO_DOCUMENT_SEND_API1

Hi Friends,
I am facing the problem wiht the function module SO_DOCUMENT_SEND_API1,
My actull requirement is : - i need to send the sap data to my externa mail id (Like as XYZ@) with out the any attachment , So i have implemented the code with the function module SO_DOCUMENT_SEND_API1.
The mail has successfully sent the sap inbox (SOST) but the mail are not reached to the external mail ID'S( XYZ@GMAIL)
i Have maintained my code lines same as below.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      document_data = wa_doc_data
      put_in_outbox = ca_x
      commit_work   = ca_x
    TABLES
      packing_list = tb_packing_list
      contents_txt = tb_mailbody
      receivers     = tb_receiver.
Can you please tell me soultion ,
Thanks
charan.

Hi charan,
                  If u r able to see the mail in sost, then i think ur code has worked fine. if the mail is not going to outside domains from sost u need to do some configurations for that, u can find lots of configuration docs regarding mail setup in sap.
once try to pass below parameter also.
t_receivers1-rec_type = 'U'.
For configuring mail setup u need to sit with ur basis guy.
Moderator message: please do not use SMS speak.
Edited by: Thomas Zloch on Nov 23, 2010 5:51 PM

Regarding the function module 'REUSE_ALV_GRID_DISPLAY'

wat do these things do in 'REUSE_ALV_GRID_DISPLAY' function module and how to use them??
       IS_VARIANT                        =
      IT_EVENTS                         =
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      I_HTML_HEIGHT_TOP                 = 0

Hi
See the function module Documentation,
Passing an EXIT routine indicates to the ALV that the application wants to respond to certain function codes.
Generally, these are function codes that are unknown to the ALV (that is, are not standard ALV functions) and that were defined and set by a user status.
See also the documentation on parameter I_CALLBACK_PF_STATUS_SET.
The interface of the form routine specified must be defined as follows:
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Parameter R_UCOMM contains the function code triggered.
Structure RS_SELFIELD contains the following information:
tabname : Name of the internal output table
tabindex : Index of the internal output table
fieldname: Field name
endsum : Cursor is located on the totals line
sumindex : If >0, the cursor is located on a subtotals line
value : Value of the field on the list
refresh : (Exporting) List should be set up again
col_stable:(Exporting) Keep column position when list is set up again
row_stable:(Exporting) Keep row position when list is set up again
exit :(Exporting) Exit list (and ALV)
before_action: Call before standard action execution
after_action : Call after standard action execution, before list setup
ignore_multi : Internal use
sel_tab_field: Internal use
The EXIT routine is called whenever a function unknown to the ALV is triggered or if the routine call before/after the execution of a standard function code has been defined by interface parameter IT_EVENT_EXIT.
See also the documentation on parameter IT_EVENT_EXIT.
The function code and the current cursor position are then passed on to the calling program through the EXIT routine.
If the user has selected multiple rows by selecting checkboxes, the output table field designated as the checkbox contains the current state of the checkbox in the list.
Top_Of_page :
If the caller specifies an EXIT routine, this routine must have the following form:
FORM top_of_page.
Module REUSE_ALV_COMMENTARY_WRITE can then be called within the EXIT routine. This module is responsible for formatting the header information and also ensures online HTML formatting. In the print preview or in batch mode, the text passed is then output in the normal format.
If module REUSE_ALV_COMMENTARY_WRITE cannot be used, you must use two parameters instead. In I_CALLBACK_TOP_OF_PAGE you pass the form routine that is responsible for normal formatting in batch mode or in the print preview mode. The form routine that is responsible for online formatting, is passed in parameter I_CALLBACK_HTML_TOP_OF_PAGE. If one of these parameters is not filled, top-of-page is not output in the respective mode.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
<b>REward if usefull</b>

Error in the function module CONVERT_ABAPSPOOLJOB_2_PDF

I have generated the Spool for the smart form output.
I want to convert that to PDF. so after fetching the spool number i have used the above function module as below.
Here i am getting an error as "Spool request 11378 contains no ABAP list data"
Here is the code for reference. Please guide me your suggesions.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      src_spoolid   = gd_spool_nr
      no_dialog     = c_no
      dst_device    = c_device
    IMPORTING
      pdf_bytecount = gd_bytecount
    TABLES
      pdf           = it_pdf_output.

Hi Manjunath,
See the program RSTXPDFT4 to know how to use the fm CONVERT_ABAPSPOOLJOB_2_PDF
Declare an internal table like :
DATA: lt_pdf LIKE tline OCCURS 100 WITH HEADER LINE.
and call the Fm :
pass spool request no and bytecount.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = i_spool_request
no_dialog = ' '
IMPORTING
pdf_bytecount = lv_bytecount
TABLES
pdf = lt_pdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
Check the following link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8cd6adbb-0301-0010-39ba-38c601d5db9
This is a report program that will execute the given program with the specified variant in background and convert the spool request into PDF and send it as attachment to the specified Email ID.
Regards,
Jagadish

[SOLVED] Error with the php5 module for apache

Hi!
I've installed Apache 2.0.55-1 and PHP5 5.1.4-4. When I try to run the apache server it fails. Then I do httpd -k start and I get:
Syntax error on line 262 of /etc/httpd/conf/httpd.conf:
API module structure `php5_module' in file /usr/lib/apache/libphp5.so is garbled - perhaps this is not an Apache module DSO?
The file libphp5 exists, but seems corrupted.
See you
NeOnsKuLL

That version of the package has been built with apache 2.2.x. Be sure to use that version of apache too, as 2.0 won't work with that specific package.

Receiving a continuous status error with the FP1600 module.

I have 3 banks of terminals. All three banks use a FP-1600 module as the network interface. All three banks operate when I power the modules. However, after roughly 15min to a half hour, bank number 1 experiences a continuous red blinking status error, followed by total communication loss to Labview (there is still power to the terminal). The only way to re-establish communication is to cycle the power. This bank contains 3, AO-200 modules; 1, AO-210 module; 2, AI-111 modules; 1, AI-110 module, and 1 RLY-420 module. All modules are powered the same, and the others have never lost communication.

Prashant,
I would contact the National Instruments support by phone, as you may need to return the FP-1600 for repair.
http://sine.ni.com/apps/we/niae_asc.main
Communication Methodhone NI
Regards,
Cyril Bouton
Applications Engineer
National Instruments
Cyril Bouton
Active LabVIEW Developper

Catching the error from the function module

hi,
call function 'ZV_SALES_ORDER_CANCEL_TSPPRA'
    exporting
      salesdocument = l_order
      customer      = l_kunnr
    importing
      return        = return
the return contains the error message.
how to display this error message in our program

Hi Sudarshan,
What is the type of return. Is it a BAPIRET.
Then just check for the MSGTYP and if it is E then show the error.
Regards,
Atish

Help with the function module

Hi Expert,
I need help witht the functionmodule i just need to write a FM which has to read all the layouts Input values and multiply a percentage to create a new amounts. so is that i need to have both functionmdule and initializer and it will great if you can explain with some ABAP programs. so that i can follow up.

See this FM : UPF_QUOTA_PLANNING
You can code accordingly; init is optional; you dont init FM.
Ravi Thothadri

Error executing custom function module

Hi all,
am trying to read a function module form my java code as below.
There is no problem with the function module.
I think there is some problem with the java code that is written. I am sure the problem lies with the TABLES IT_PRODUCT_DATA STRUCTURE ZOG_ITEM_SCREENSTR.
Function module parameters and signature.
FUNCTION ZGET_CUST_ORDERGUIDE_ITEMDATA.
""Local Interface:
*" IMPORTING
*"     VALUE(IV_ORDER_GUID) TYPE CRMT_OBJECT_GUID OPTIONAL
*"     VALUE(IV_CUSTOMER) TYPE BU_PARTNER
*" TABLES
*"      IT_PRODUCT_DATA STRUCTURE ZOG_ITEM_SCREENSTR
Java Code that is Implemented is attached above.
public ArrayList fetchOrderGuide(String customerNumber) {
          ArrayList itemList = new ArrayList();
                                   ItemSalesDoc itemSalesDoc = new ItemSalesDoc();
          if (log.isDebugEnabled()) {
               log.debug("inside ZAdminLogin");
          try
          JCoConnection aJCoCon = (JCoConnection) getConnectionFactory().getConnection(com.sap.isa.core.eai.init.InitEaiISA.FACTORY_NAME_JCO,
                                                                                             com.sap.isa.core.eai.init.InitEaiISA.CON_NAME_ISA_STATEFUL);
               try
                    try
                         JCO.Function zFetchSalesOrderFunctionModule = aJCoCon.getJCoFunction("ZGET_CUST_ORDERGUIDE_ITEMDATA");
                         // set the import values
                         Table zItemsTable = new Table("ITEMS");
                                   //zPackagesTable.addColumn(Table.TYPE_STRING,"HUI");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JOGITEM");
                         zItemsTable.addColumn(Table.TYPE_INT,"JPRUOM");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JPRSEQ");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JOGDESC");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JLINE");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JOGNR");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JPACK");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JSIZE");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JBRAND");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JWEEKAVG");
                         zItemsTable.addColumn(Table.TYPE_STRING,"JDELFLAG");
                         JCO.ParameterList importParams = zFetchSalesOrderFunctionModule.getImportParameterList();
                         importParams.setValue("BP-104", "IV_CUSTOMER");
                         aJCoCon.execute(zFetchSalesOrderFunctionModule);
                         JCO.Table zRtItems = zFetchSalesOrderFunctionModule.getTableParameterList().getTable("IT_PRODUCT_DATA");
                                        int numberOfPackages = zRtItems.getNumRows();
                                        if (log.isDebugEnabled()) {
                                             log.debug("number of packages " + numberOfPackages);
                                        if (numberOfPackages > 0)
                                             for (int j=0; j<numberOfPackages; j++)
                                                  TableRow itemRow = zItemsTable.insertRow();
                                                  //itemRow.setRowKey(new TechKey(zRtItems.getString("EXIDV")));
                                                  //packageRow.getField("HUI").setValue(zGoods.getString("EXIDV"));
                                                  itemRow.getField("JOGITEM").setValue(zRtItems.getString("OGITEM"));
                                                  itemRow.getField("JPRSEQ").setValue(zRtItems.getString("PRSEQ"));
                                                  itemRow.getField("JOGDESC").setValue(zRtItems.getString("OGDESC"));
                                                  itemRow.getField("JLINE").setValue(zRtItems.getString("LINE"));
                                                  itemRow.getField("JOGNR").setValue(zRtItems.getString("OGNR"));
                                                  itemRow.getField("JPACK").setValue(zRtItems.getString("PACK"));
                                                  itemRow.getField("JSIZE").setValue(zRtItems.getString("SIZE"));
                                                  itemRow.getField("JBRAND").setValue(zRtItems.getString("BRAND"));
                                                  itemRow.getField("JWEEKAVG").setValue(zRtItems.getString("WEEKAVG"));
                                                  itemRow.getField("JDELFLAG").setValue(zRtItems.getString("DELFLAG"));
                                                  zRtItems.nextRow();
                    catch(JCO.AbapException abapException)
                         //Exception thrown, user is not valid
                         if(log.isDebugEnabled())
                              log.debug( abapException.getKey());
               catch (Exception ex)
                    if (log.isDebugEnabled()) {
                         log.debug(ex);
               finally
                    aJCoCon.close();
          catch(BackendException beeEx)
               if(log.isDebugEnabled())
          return itemList;
LOGDETAILS
ZGET_CUST_ORDERGUIDE_ITEMDATA:: - IN: INPUT * IV_CUSTOMER='BP-104' IV_ORDER_GUID='00000000000000000000000000000000'
Oct 9, 2008 6:48:41 AM,507 SAPEngine_Application_Thread[impl:3]_7 Error com.sap.isa.core.eai.sp.jco.JCoConnectionStateful Error occcurred in EAI layer "com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Trying to access row values in a table which does not have any rows yet".
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Trying to access row values in a table which does not have any rows yet
            at com.sap.mw.jco.JCO$Record.checkRowCapacity(JCO.java:12354)
            at com.sap.mw.jco.JCO$Record.getString(JCO.java:12827)
            at com.sap.mw.jco.JCO$Field.getString(JCO.java:11055)
            at com.sap.isa.core.eai.sp.jco.JCoUtil.paramIterator(JCoUtil.java:412)
            at com.sap.isa.core.eai.sp.jco.JCoUtil.logCall(JCoUtil.java:382)
            at com.sap.isa.core.eai.sp.jco.JCoUtil.logCall(JCoUtil.java:236)
            at
All helpful answers will be rewarded heavily

hi,
first of all you do not set the import values for your table correct. You should do something similar like this:
Function myFunction = connection.getJCoFunction(Z_FM");
Table myTable = myFunction.getTableParameterList().getTable("Z_TABLE");
for(int i=0; i<2; i++) {
    myTable.appendRow();
                    myTable.setValue(value1,"VALUE1");
                    myTable.setValue(value2,"vALUE2");
               connection.execute(myFunction);
Did you debug your java class? You should check at which point your java class throws the error.
Regards
Michael

Regarding the function modules

Hi anybody pls tell me
what are the scenarios for the creation of function module
can you give me the some examples
thanks in advance

<b>Function Modules</b>
Function modules are procedures that are defined in function groups (special ABAP programs with type F) and can be called from any ABAP program. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
Function modules allow you to encapsulate and reuse global functions in the R/3 System. They are stored in a central library. The R/3 System contains a wide range of predefined function modules that you can call from any ABAP program. Function modules also play an important role in database updates and in remote communications between R/3 Systems or between an R/3 System and a non-SAP system.
Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
The Function Builder also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed

Error message for function module

I have created a custom function module. I have activated it. But when i'm trying to use it in a program it is showing an error. The function module has 'TABLES' but it is showing error as:
"field "TABLES" is unknown. It is neither in one of the specified tables nor defined by a DATA statement".
Please help me!!
Thank you.

Hello Titan,
Generally you get these kind of syntax errors when there is some problem with the format of the program. Please recheck the format of the program in which you are calling the newly created function module. Please check if there are any erroneous '.' or ',' in the program before the 'Tables' partameter of the function module.
Please verify the same.
Regards,
Pavan

Error with the function module REUSE_ALV_GRID_DISPLAY

Similar Messages

Maybe you are looking for