Error with the Sender file adapter

Hello Gurus,
My scenario is Web service to file... but to initiate webservice i am using file sender adapter.
I am keeping one dummy file and then file sender adapter will read it and then call the soap adapter.... then it will process the request and generate the response file.
But now my problem is.... suppose there is some problem in receiver and the file is not getting picked up from the source.... then when next time i will resolve the error... and again try to pick the file... it will still give error that "MESSAGE NOT FOUND".
but if i will change the file name while picking it will pick up the file... M not able to understand that y it is happening... can anyone help me in this plzzzzzzzzz....
Let me know if any more information is required..
Thanks in advance..
Hetal

Thanks Gaurav.
You need to generate the files in sequence. I think EOIO should help you with this as it can help generated unique ID for messages in a Q.
Response : in Message Monitoring
Send binary file "edw_lms_traininighist.txt" from FTP server "aixedistg:/ercot/data/xi/lms/outbound", size 171 bytes with QoS EO
2008-10-27 11:59:16 Success RRB: entering RequestResponseBean
2008-10-27 11:59:16 Success RRB: passing through ...
2008-10-27 11:59:16 Success RRB: suspending the transaction
2008-10-27 11:59:16 Success Application attempting to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2008-10-27 11:59:16 Success RRB: leaving RequestResponseBean
2008-10-27 11:59:16 Success Trying to put the message into the call queue.
2008-10-27 11:59:16 Success Message successfully put into the queue.
2008-10-27 11:59:16 Success The message was successfully retrieved from the call queue.
2008-10-27 11:59:16 Success The message status set to DLNG.
Check if you see anything in logs. If nothing check the LOGGING_SYNC is 1 or not in SXMB_ADM
Its already there in place.But still getting error.
Thanks,
Hetal

Similar Messages

Issue with the sender file interfaces when using UTF-8 files

Hello experts,
     We are having number of File to SAP interface scenarios in our business process. In the past, we are having the files coming to us in ASCII text format. Recently, because of the business process change(to handle multiple languages like Chinese), we are getting now the same files in UTF-8 format. So, we have changed the attribute File Type in the sender communication channel from Binary to Text and used encoding format as UTF-8.
Now, when we see the processed files in PI, we are missing the Header record in the message. For example, we have the PO interface in the following format:
Identifier     Information
H     PO header information
I     PO Item information
I     PO Item information
Once the file adapter picks this format kind of file and when we see the XML message in PI, it is just having only two Items information. The header part is not coming to PI at all and the message is trying to get processed inside SAP and therefore interface is failing.
Additional observations made:
u2022     We have checked the Document Offset field value too; it is initial for the interface.
u2022     We added an empty line in the UTF-8 text file, it worked fine. But, this is not an ideal solution for us, because the system which generates these files, canu2019t handle it.
   Does any one has observed this kind of problem before? If so, can you please help me ...
Thanks,
Adithya K

Thanks for all the information. Currently i've tried to use both modules (TextCodepageConversionBean and XMLAnonymizerBean) in my Sender File Adapter, but for now without any result...
To describe the situation: i am using flatfiles which i am fetched from the file system (NFS) by the Sender File Adapter. To translate the characters to the XML strucutre, the File Content Conversion protocol is been used.
The content conversion defines the structure base on the first two characters on each row in the flat file. This worked fine till one of our suppliers is delivering BOM characters like "EF BB BF" in the beginning of the file.The content conversion is not able to recognize my header characters in this situation, which will normally start with "01".
Any suggestions?

Error with the Receiver JMS Adapter (Connection On-Demand feature)

Hi,
In high volume we are experiencing errors with the Receiver JMS Adapter and the connection On-demand feature:
Adapter Framework caught exception: while trying to invoke the method com.sap.aii.adapter.jms.api.connector.DisconnectorListener.notifyEvent(java.lang.String) of an object loaded from local variable 'listener'
Delivering the message to the application using connection JMS_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: while trying to invoke the method com.sap.aii.adapter.jms.api.connector.DisconnectorListener.notifyEvent(java.lang.String) of an object loaded from local variable 'listener'.
The message status was set to WAIT.
Looks like the message is successfuly reprocess after the wait period but the ALEAUD/Akcnowledgment are not successful in the sender ECC system. (SAP -> PI - > JMS)
Any idea?
PI 7.1 EHP1
Thanks,
Martin
/people/sunil.ojha5/blog/2010/08/31/review-of-sap-pi-jms-adapter-on-demand-connection-feature
Edited by: Martin Lavoie Rousseau on Jun 3, 2011 3:21 PM

Please ensure to have specified an User and password to connect to JMS server (don't leave the fields empty).

Duplicate message handling in the sender file adapter

Hi,
I enabled duplicate file handling check in the sender file adapter so that whenever there is a duplicate file it should send me an alert also it should disable the channel so that i do not get that duplicate file alert message again and again.
My question is will it activate the channel again as soon as a new file arrives or do i need to manually do that.
Michal's PI tips: Duplicate handling in file adapter - 7.31

Hi Hema,
You will have to activate the channel manually. The idea behind the 'disable' functionality is to avoid further file processing through that channel which can only start once the channel is activated again manually.
Regards,
Abhishek

Error when configuring Sender File Adapter (XI 7.0)

Hi all,
After i had configured my Sender File Adapter of Communication Channel 'CC_SEND_MATERIAL_FILE', an error message for this Communication Channel (in Runtime WorkBench/Component Monitoring/Adapter Engine/Communication Channel Monitoring) occurred as below:
Error: com.sap.aii.af.ra.ms.api.DeliveryException: java.net.MalformedURLException: unknown protocol: dest
I think that all configurations for this Sender File Adapter are correct. But i don't know where is protocol "dest" and how can i correct this protocol.
Could anyone please help me to resolve this problem?
Thanks for all in advance,
Vinh Vo

Hi Sarvesh,
Yes, i have configured the source file with the path in the AL11. I think all an other configurations are also OK. But i don't know what is protocol 'dest'.
Anybody can explain and help me, please!
Vinh Vo

Limiting the number of files being picked up by the sender file adapter

We are running a file adapter to collect xml files from a legacy system in a shared network location. The files are picked up, information is sorted and mapped, and then sent to a proxy on our CRM system to store the data. Very simple and not-complex.
Our initial data load will consist of somewhere in the neighborhood of 900k records, which is killing CRM.
A co-worker with a bit more experience was telling me that he believes there is a way to limit the number of files that will be pulled per iteration of the file communication channel. If this is the case, can someone share with me the parameters that need to be set?
My apologies if this is a duplicate post - I have tried to look for a good answer in the forums and have come up empty.
We are running PI 7.1, and I believe it is SP 6.
Thanks in advance for the help,
Ben

Hi Ben,
There is no standard way to limit the number of files to be processed by the communication channel.
On the Sender File CC, there is a parameter " Maximum File Size" which restricts the files bigger than the specific size, but this is just a prevention not a solution.
If you have a single big size file, then somehow you have to create small sized files out of it.
Thanks,
Pooja Pandey

Selective Polling in the Sender File Adapter

Hi,
I have the following requirement
1) File X is placed in the directory which is the source file for the sender adapter to poll
2) File X is appended regulary with data until it is polled. During this appending the sender adapter should not poll this file
3) Current process (without PI) they use a control file to stop this happening. i.e. they place a File Y in the directory to show the file is being updated and not to be touched. Once The file is appended File Y is removed and the file should be polled
So ultimately I have to configure the sender adapter to poll for File X (say every minute) except when there is File Y in the directory.
Any ideas?

Hello,
You can use the "Msec to wait before modification check" feature in sender file adapter to achieve the requirement.
No need to place the "File Y"...i.e step 3 to perform.
Check the below link for more details:
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/658ac3344a4de0e10000000a1553f7/frameset.htm
-Rahul

Retrieving the file name in the adapter module in the sender file adapter

hi,
i need to retrieve the file name, in the adapter module. This module is placed in the sender file channel.
After the file adapter has picked up the file from the file directory, the file is placed in the archived directory.Custom adapter mofule is place in the file shanel. i need to retrieve the file name of the file in the adapter module. Is it possible to retrieve the file name?
Also is it possible to retrieve the archive directory path in module?
Regards,
Meenkashi

Hi Meenakshi,
I guess you are looking for this
/people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules
Regards
Suraj

Can a class or Module be executed before the sender File Adapter execute?

Hi
In case of sender adapter the module in the module processor gets executed after the adapter has performed its operation.
Is there a way I can execute the module before the sender adapter starts execution?
Or Is it possible to specify a java class to be executed before adapter, through configuration in the communication channel or some other way?
Thanks
Vijendra

HI Vijendra,
The File module adapter is the first one to get executed.
The only thing you can do is to run shell scripts if you have to do any activity in the folder or on the file.
Regards
Vijaya

Question about file conversion in the sender file adapter

Hi, all.
I am trying to get the file adapter to parse a file. The message type is the following:
JOB
   Msg 0..1
      Transaction 0 ... unbounded
         Data   0 ... 1
            f1 string
            f2 string
How would you define the recordset name and recordset structure to produce the same structure in the converted xml. I tried:
recordset name : Msg
recordset structure : Data, *
But the transaction is missing. I tried:
recordset name: Msg
recordset structure : Transaction, *
Then the data is missing. Note that the actual data in f1, f2 ... are loaded successfully though.
Thanks,
Jonathan.

Hi, Hareesh
I agree. But that is how it is defined now by someone else. It is hard to change it as he defines the same structure on the receiving side. I didn't want to change the receiving structure as it touches the proxy code too. So I want to make something short and sweet.
Basically the data looks like this:
11,222
55,666
The result xml should be something like:
<JOB>
<Msg>
     <Transaction>
        <DATA>
           11
           222
        </DATA>
     </Transaction>
     <Transaction>
        <DATA>
          55
          666
        </DATA>
      </Transaction>
</MSG>
</JOB>
I know either the DATA has no meaning and it's giving me a headache ... but that's how it's done and I don't want to rock the boat too much. There are lots of mapping that I have changed otherwise.
Thanks,
Jonathan.

Error with the resource file in Struts

Hi
i am working on small struts applications . when i am running my application in tomcat it throwing a error like
javax.servlet.ServletException: Cannot find message resources under key org.apache.struts.action.MESSAGE
     org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:682)
     org.apache.jsp.userRegistration_jsp._jspService(userRegistration_jsp.java:99)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:136)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:320)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:294)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
My ApplicationResources.properties file is in my package like (WEB-INF/classes/strutsTutorial/) . I gave a path in web.xml like below
<init-param>
     <param-name>Application</param-name>
     <param-value>strutsTutorial.ApplicationResources</param-value>
</init-param>
Can any one help
Thanks in advance
Ram

please give the code of
contents bin = git_objbin " how this is getting populated.
0 0 0 0 2 L O U D S P E A K R O T H E R 3 8 W h i t e <b>0 0</b>
0031 L O U D S P E A K R O T H E R 3 8 Black
0 000
38
from this im not able to understand is this over population or concatenation problem
y dont u make a append to the final table
like
data : begin of itxt occurs 0, ,
s1(132) type c ,
end of itxt.
loop at itab.
itxt-s1+0(4) = itab-f1.
itxt-s1+4(6) = itab-f2.
itxt-s1+10(8) = itab-f3.
itxts1+18(4) = itab-f4.
append itxt.
clear itxt.
endloop.
exchange this to the contents bin of hte Fm .
regards,
vijay.
can u please mail the text file and the expected o/p to my mail id [email protected] so that i can see the same from the data provided i m not able to check the result properly .

How to write ModuleData process exit bean in the sender file adapter

Hi all,
I am referring to this blog:
/people/sap.user72/blog/2005/07/31/xi-read-data-from-pdf-file-in-sender-adapter
Can any one come across this situation like reading a PDF file and converting it to XML using XSL-FO. I am using NWDS, and selected Java Project and added libraries specified in that blog. I am in total confusion as what type of Project i should select. <b>I need a step by step procedure for developing XML file out of PDF referred in that blog.</b>.Thanks a lot
regards,
Ganesh

Hi Ganesh,
the how to on Adapter Modules in also available in SDN Libraray.
Check this,
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a">How to create Modules for the J2EE Adapter Engine</a>
Regards,
Bhavesh

In the interface file to proxy key field in the sender file adapter

Hi all
i do have a FLAT FILE ,
1820000000|
0010|XXX
0020|XXX
0040|XXX
0050|XXX
where 1820000000 is my PO number and 0010|ACK
0020|XXX
0040|XXX
0050|XXX
i dont what to use key field for this case in my sender adapter configuration please help me
thanking you

HI
Read the file without using key field. Just define the FCC parameters Header and Items PI will pick the file.
DT_Source
   Record
     Header 0..1
       PO_Number String 0..1
     Items 0..unbounded
       Items String 0..1
Do the FCC
Header.fieldnames PO_Number
other config for Header
Items.fieldnames Items
other config for items
Thanks
Gaurav
Edited by: Gaurav Bhargava on Nov 12, 2008 10:27 AM
Edited by: Gaurav Bhargava on Nov 12, 2008 10:27 AM

Remove of quotes"' in the sender file adapter -- file content conversion

HI Guys,
MY source file is comma seprated file (,) in the file i had quotes" " for the data like
"5000543","0.00","03/04/2009",
is there any way i can remove the quotes in file content conversion
Please help me on this
Regards
Srinivas

Srinivas,
This should not be a big deal, because your fields are separated by a comma. So you need to keep in mind like you are doing the content conversion for a csv file.
See this blogs for some information:
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
In the second blog 1345 there are parameters for content conversion. So similarly mention your conversion parameters in your sender communication channel. So after converting to xml your input fields have values like:
field1: "5000543"
field2: "0.00"
field3: "03/04/2009"
So all your field values has with "". Now you can use either standard replace funciton or a udf as given above and then it will remove the quotes and then you can map according to your requirements. If you think sometimes you can get quotes and sometime not in the file then you can use function like startswith or endswith along with exists and can map accordingly.
Regards,
---Satish

Sender File Adapter - No error, but not generating any message

I am working on a file to RFC scenario. The sender file adapter is using content conversion to read a comma delimited file. The file is being picked up and archived correctly, and the adapter monitor does not show any errors. However, the process disappears at this point. I don't see any messages in SXMB_MONI, and there is no sign that the process is reaching the RFC adapter. Has anyone ever had this happen before?
I have four line types for Buildings, Additions, Floors, and Rooms.
I list all four in the recordset structure, and I identify a key for each with the keyFieldValue parameter. I list a fieldSeparator of ',' and an endSeparator of 'nl' for each row. And i have a list of the fieldnames in the fieldnames parameter.
The only thing i'm not sure about is the keyFieldinStructure parameter. I have specified ignore there, because I don't want that field in my XML. Do I still need that field in my sender datatype, even if I'm ignoring it, or can I leave it out?
Thanks for any help. Please don't just list blogs unless they have something you think is helpful with my specific problem. I have already read all of the blogs that deal generally with the sender file adapter and file content conversion, and I need more specific help at this point.

I made one error before, it IS showing up in the Recovered Adapter Audit Log (it took that log about 10 minutes to open that particular tab so I didn't notice them there).
Here is what it says there:
2006-06-12 11:22:59 Success Channel CC_S_File_FIPM_Buildings: Entire file content converted to XML format
2006-06-12 11:22:59 Warning Channel CC_S_File_FIPM_Buildings: Empty document found. Proceed without sending message
2006-06-12 11:22:59 Success File "/interfaces/one line building.txt" archived after processing
Here are my parameters in the file content conversion:
Buildings.fieldNames     RecordType,PLTXT,STORT,STREET,POST_CODE1,CITY1,REGION,PARNR,X_COORD,Y_COORD,ASSIGN_SQ_FT,BLDG_NUM,CAMPUS,GR_SQ_FT,NET_SQ_FT
Buildings.keyFieldValue     'B'
Buildings.fieldSeparator     ','
Buildings.endSeparator     'nl'
Buildings.keyFieldInStructure     ignore
Additions.fieldNames     RecordType,ASSIGN_SQ_FT,BLDG_ABBR,CAMPUS,ADDITION,BLDG_USE,BLDG__NUMBER
Additions.keyFieldValue     'A'
Additions.fieldSeparator     ','
Additions.endSeparator     'nl'
Additions.keyFieldInStructure     ignore
Floors.fieldNames     RecordType,BLDG_ABBR,CAMPUS,ADDITION,FLOOR,ASSIGNABLE_SQUARE_FOOT,BLDG_NUMBER
Floors.keyFieldValue     'F'
Floors.fieldSeparator     ','
Floors.endSeparator     'nl'
Floors.keyFieldInStrucutre     ignore
Rooms.fieldNames     RecordType,SHTXT,MSGRP,ADDITION,ASSIGNED_DEPT,BLDG_ABBV,FLOOR_CAMPUS,AREA,RCD_CODE,DEPT_CODE,BUILDING_NUMBER,ROOM_COMMON_KEY
Rooms.keyFieldValue     'R'
Rooms.fieldSeparator     ','
Rooms.endSeparator     'nl'
Rooms.keyFieldInStructure     ignore
And here is my data type:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_FIPM_BuildingUpdate xmlns:ns0="urn:XXXXXX:FIPM:Buildings:SYS">
   <Buildings>
      <PLTXT/>
      <STORT/>
      <STREET/>
      <POST_CODE1/>
      <CITY1/>
      <REGION/>
      <PARNR/>
      <X_COORD/>
      <Y_COORD/>
      <ASSIGN_SQ_FT/>
      <BLDG_NUM/>
      <CAMPUS/>
      <GR_SQ_FT/>
      <NET_SQ_FT/>
   </Buildings>
   <Additions>
      <ASSIGN_SQ_FT/>
      <BLDG_ABBR/>
      <CAMPUS/>
      <ADDITION/>
      <BLDG_USE/>
      <BLDG_NUMBER/>
   </Additions>
   <Floors>
      <BLDG_ABBR/>
      <CAMPUS/>
      <ADDITION/>
      <FLOOR/>
      <ASSIGNABLE_SQUARE_FOOT/>
      <BLDG_NUMBER/>
   </Floors>
   <Rooms>
      <SHTXT/>
      <MSGRP/>
      <ADDITION/>
      <ASSIGNED_DEPT/>
      <BLDG_ABBV/>
      <FLOOR/>
      <CAMPUS/>
      <AREA/>
      <RCD_CODE/>
      <DEPT_CODE/>
      <BUILDING_NUMBER/>
      <ROOM_COMMON_KEY/>
   </Rooms>
</ns0:MT_FIPM_BuildingUpdate>
I'm going to recheck everything again, but maybe you guys will see something? I don't.
Vanda

Error with the Sender file adapter

Similar Messages

Maybe you are looking for