Error with the Receiver JMS Adapter (Connection On-Demand feature)

Hi,
In high volume we are experiencing errors with the Receiver JMS Adapter and the connection On-demand feature:
Adapter Framework caught exception: while trying to invoke the method com.sap.aii.adapter.jms.api.connector.DisconnectorListener.notifyEvent(java.lang.String) of an object loaded from local variable 'listener'
Delivering the message to the application using connection JMS_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: while trying to invoke the method com.sap.aii.adapter.jms.api.connector.DisconnectorListener.notifyEvent(java.lang.String) of an object loaded from local variable 'listener'.
The message status was set to WAIT.
Looks like the message is successfuly reprocess after the wait period but the ALEAUD/Akcnowledgment are not successful in the sender ECC system. (SAP -> PI - > JMS)
Any idea?
PI 7.1 EHP1
Thanks,
Martin
/people/sunil.ojha5/blog/2010/08/31/review-of-sap-pi-jms-adapter-on-demand-connection-feature
Edited by: Martin Lavoie Rousseau on Jun 3, 2011 3:21 PM

Please ensure to have specified an User and password to connect to JMS server (don't leave the fields empty).

Similar Messages

Error in the Receiver SOAP Adapter

Hello Experts,
I am sending an order number by running a report on the ECC 6.0 server to a web service for publishing the information on the web site. The receiver side is configured as Receiver SOAP Adapter . I am getting the following error in the SXMB_MONI Transaction.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Not enough message parts were received for the operation.
Kindly let me know to overcome this problem.
Thanks
Best Regards
S Joshi

Hi Ramesh,
The message Iam getting in MONI is as follows:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Not enough message parts were received for the operation.
This is the response for the request that i am sending for order creation. I did checked the fields also it is same and the values of the fields too. they all are correct. Over and above this it was working fine till last week , but suddendly this week I am getting this error.
Regards

Error configuring the receiver http adapter.

Hi All,
I get the folllowing error in the ICM Monitor trace file after I configure teh HTTP Adpater.Please can anyone suggets what is this error message and how to fix it.
Thr 34] Thu Sep 3 07:59:18 2009
[Thr 34] *** ERROR => IcmConnRollInWP: AppServer context already released [icxxthr_mt.c 2388]
[Thr 12] *** ERROR => IcmPlAllocBuf: MpiGetOutbuf failed (rc = 14) [icxxplugin_m 1121]
Regards,
Shreshtha

Do I have to set up certificates of that external server in my XI server.
Yes. You have to import certificates on abap stack using STRUST.
Second thing ,do I have to create an entry for https,port 443 in the parameter list of the ICM monitor.
Yes.
See this
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
Regards,
Prateek

Error with the Sender file adapter

Hello Gurus,
My scenario is Web service to file... but to initiate webservice i am using file sender adapter.
I am keeping one dummy file and then file sender adapter will read it and then call the soap adapter.... then it will process the request and generate the response file.
But now my problem is.... suppose there is some problem in receiver and the file is not getting picked up from the source.... then when next time i will resolve the error... and again try to pick the file... it will still give error that "MESSAGE NOT FOUND".
but if i will change the file name while picking it will pick up the file... M not able to understand that y it is happening... can anyone help me in this plzzzzzzzzz....
Let me know if any more information is required..
Thanks in advance..
Hetal

Thanks Gaurav.
You need to generate the files in sequence. I think EOIO should help you with this as it can help generated unique ID for messages in a Q.
Response : in Message Monitoring
Send binary file "edw_lms_traininighist.txt" from FTP server "aixedistg:/ercot/data/xi/lms/outbound", size 171 bytes with QoS EO
2008-10-27 11:59:16 Success RRB: entering RequestResponseBean
2008-10-27 11:59:16 Success RRB: passing through ...
2008-10-27 11:59:16 Success RRB: suspending the transaction
2008-10-27 11:59:16 Success Application attempting to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2008-10-27 11:59:16 Success RRB: leaving RequestResponseBean
2008-10-27 11:59:16 Success Trying to put the message into the call queue.
2008-10-27 11:59:16 Success Message successfully put into the queue.
2008-10-27 11:59:16 Success The message was successfully retrieved from the call queue.
2008-10-27 11:59:16 Success The message status set to DLNG.
Check if you see anything in logs. If nothing check the LOGGING_SYNC is 1 or not in SXMB_ADM
Its already there in place.But still getting error.
Thanks,
Hetal

Content Conversion Module with the J2EE JMS Adapter

HI,
I am following this PDF
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50061bd9-e56e-2910-3495-c5faa652b710
I have done according to No 3 (page 5) and No 3.1 (page 6),
but in Adapter Monitor I am getting the following error
Error: Module exception java.lang.ClassCastException found
what is this error and where I have to check
Help pls
Thanks
dushanth
Message was edited by:
dushanth ry
Message was edited by:
dushanth ry

hi
Try with this
Check the library files(aii_af_mp.jar, aii_af_ms_api.jar and aii_af_trace.jar ) are inside the EAR. If this is the case, delete them before deploying
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81
ClassCastException using Moduleprocessor
Module developemnt: casting to Message
Thanks

Error in the Receiver JDBC Adapter

Hi Guys,
Iam getting the below given error when trying to insert the data into the Legacy DB...
2006-06-20 01:16:25 Error Unable to execute statement for table or stored procedure. 'Table_Name' (Structure 'STATEMENT') due to java.sql.SQLException: ORA-01861: literal does not match format string
2006-06-20 01:16:25 Error Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'Table_Name' (structure 'STATEMENT'): java.sql.SQLException: ORA-01861: literal does not match format string
Can anybody tell me what the error is ?
Regards,
Kittu.

Kittu,
this is how your Target Datatype should be,
<nr1:MT_tablename xmlns:nr1="urn:XXXXXX.XX.yyyyy">
<StatementName>
<dbTableName action=INSERT>
<table>TABLENAMETO WHICH INASERTING DATA</table>
<access>
<ts_matl>2006-06-14</ts_matl>
<no_matl>M181127</no_matl>
<qt_do>1</qt_do>
</access>
</dbTableName>
</StatementName>
</nr1:MT_tablename >
Regards,
Bhavesh
Message was edited by: Bhavesh Kantilal

Sender/receiver JMS Adapter XML Format

What is the XML format do we need to pass to Sender/receiver JMS adapter to get it processed. Do we have any specific format like JDBC adapter.
Thanks,
Sam

Hi,
1) The JMS adapter (Java Message Service) enables you to connect messaging systems to the Integration Engine or the PCK
2) Before to use the JMS adapter we must first install the relevant JMS driver.
The required Java libraries are product-specific The provider setting specifications are the same for the receiver and sender adapter
3)We need to configure the JMS adapter in the configuration part of the Integration Builder/PCK
4) The Sender JMS adapter is configured to send JMS messages to the Integration Engine or the PCK.
5)The Receiver JMS adapter is configured to be able to convert XI messages from the Integration Server or the PCK into JMS messages
Please go through this link
1)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm
2)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm - Configuring the Sender JMS Adapter
3)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm -
Configuring the Receiver JMS Adapter
4)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm -
JMS-Provider-Specific Settings
5)http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm -
JMS Adapter Modules
6)http://help.sap.com/saphelp_nw04/helpdata/en/45/20d1dec20a0732e10000000a155369/frameset.htm -
Async/Sync and Sync/Async Bridge in the JMS Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/content.htm
Thanks,
Soumya.

CorrelationId in receiver JMS adapter.

hi to all,
i need to send the correltionId in the message header of a receiver jms adapter.
which parameter i need to specify?
i've cheked the flag "set the additional JMS parameters...." as the documentation says: DCJMSCorreleationID with value 0001.
but nothing change in the message header.
thanks in advance
Claudio.

<i>here is a new parameter in JMS adapter now. There is an option of saving the JMS correlation ID of the request in the receiver JMS adapter. In the sender adapter, one can then set the XI conversation ID to the saved JMS correlation ID of the request. This makes the additional parameters that were required in previous Support Packages obsolete. However, the configuration settings that were made prior to SP7 are still valid.</i>
From
/people/kan.th/blog/2007/02/05/exploring-jms-and-sap-xi-jms-adaper
Also this would b helpful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8060448a-e56e-2910-f588-9af459e7ce21
<i>[Reward if helpful]</i>
Regards,
Prateek

EDI Idoc -- Receiver JMS Adapter.

Hi,
I'm facing this issue from few days.
Sender is EDI Idoc and contains header and Footer.
This is placed in the application server of SAP system.
From there xi picks the EDI Idoc and sends to JMS server.
Facing problem on the receiver JMS Adapter.
Find the error message.
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: No transition found from state: ERROR, on event: process_commence for DFA: CC_JMS_RCV_DEVWR0000000:165b1638fd823a8f822f0db8a9b1d488"
I have provoded the "dict" and "doc" value also.
Pls suggest.
Thanks in advance,
Jeevan.

Hi Guys,
There could be some problem while deploying the libraries. Check out the thread No transition found from state: STARTING
Thanks,
PP

Receiver JMS adapter content conversion

Hi All,
Can anyone provide me guidelines on how to do content conversion for the receiver JMS adapter??
Thx
Navin

Hi,
Based on your structure , you need to configure the JMS CC parameters.
see the below link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
regards
Chilla

File to JMS Scenario - Error is Receiver JMS Adapter

Hi,
I am working on File to JMS scenario. I have deployed all required jars for MQ 6.0.2 in SDM. Create all MQ related objects. I am getting following error for Receiver JMS adapter in CC Monitoring.
Please let me know if I have missed anything. Is there anything to do in Visiual Administrator->JMS Provider or JMS Connector for these kind of Scenarios?
Thanks in Advance...
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2009
MQJE016: MQ queue manager closed channel immediately during connect
Closure reason = 2009
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

Hi,
I have made my Qmanager as default Qmgr. Now the error is :- Socket connection attempt refused
Recv JMS Communication Channel Error:-
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2059
MQJE011: Socket connection attempt refused
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

TS3694 hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regar

hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regards

Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.

ALEAUD back to ECC when we have an error in the receiver adapter engine

Hello friends,
My scenario is ECC (async) to SOAP (sync) and back to ECC (async = ALEAUD). I'm using aync/sync bridge is receiver SOAP adapter.
Is it possible to send back an ALEAUD automatically when I have an error in my receiver SOAP adapter? If so can you please explain how to achieve that?
Your help is greatly appreciated,
Thank you in advance,
Kind regards,
John

Hi,
The below reports will helps you to get alerts when any error in target end..
IDX_NOALE - you can configure what kind of acknowledgement you want to request for the send message type. for example you can configure for only error acknowledgements.
IDX_ALEREQUEST - you can configure to send back an acknowledgement as PI message, so that you can control the ALEAUD content by mapping.
Thanks & Regards,
A.Neelima.

"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary", then attempt to approve TimeSheet.

Kind day, colleague.
It was required to organize a statement chain for TimeSheet of employees, as we realized. Everything is good, but at linear managers in PSW opportunity to execute Approve when viewing TimeSheet of the employee remained, and in attempt to approve TimeSheet there
is a mistake.
500 Internal Server Error
"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary. "
Accept, is carried out as it is necessary.
It is a bug or we not correctly realized approval chain?

issue is related to the user booking time against a task that was past the finish/end date listed in the Project Schedule.
To resolve the user needs to submit their time on a valid task that is still within the current reporting timeframe, or have the Project Manager
update the task in questions so that the finish/end dates are at or beyond the submission period and then republish the project. After that, the user should be able to go in and submit their timesheet with success.
http://patrickdrews.com/2012/09/project-server-2010-timesheet-submission-produces-an-error-occurred-while-communicating-with-the-server/
kirtesh

Need to get the Mail attachment name as it is to the receiver file adapter

I am doing a Mail to File scenario. I need to get the attachment from the mail and store it on the file server. I am using the PayloadSwap bean in the sender mail adapter. My requirement is to carry forward the attachement name as it is to the receiver file adapter side and store the file with the same name.
Did any one try doing this? I was looking at developing an adapter module but got struck as I could not find whether the attachement name is stored in the XI payload after it has got swapped using the swap bean.
Any help would be appreciated.
VJ

Oops pressed the send key. Take two.
This is becoming a damn nightmare. When I run the adapter I am getting ModuleExceptions. Can you pass your eyes over these Java config settings to see what I am doing wrong. Using NWDS CE 7.1 with PI 7.1 both at SP07. All the imports were taken from PI 7.1 after SP07 was applied. The build id of NWDS is
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP07 PAT0001
Build id: 200901152336
APPLICATION.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application PUBLIC "-//Sun Microsystems, Inc.//DTD J2EE Application 1.3//EN"
"http://java.sun.com/dtd/application_1_3.dtd">
<application>
<display-name>MailPOP_EAR</display-name>
<description>EAR description</description>
<module>
<ejb>MailPOP_EJB.jar</ejb>
</module>
</application>
APPLICATION-J2EE-ENGINE.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application-j2ee-engine SYSTEM "application-j2ee-engine.dtd">
<application-j2ee-engine>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">engine.security.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">engine.j2ee14.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="service">com.sap.aii.af.svc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="interface">com.sap.aii.af.ifc.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.aii.af.lib.facade</reference-target>
</reference>
<reference reference-type="hard">
<reference-target provider-name="sap.com" target-type="library">com.sap.base.technology.facade</reference-target>
</reference>
<fail-over-enable mode="disable" />
</application-j2ee-engine>
EJB-J2EE-ENGINE.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-j2ee-engine SYSTEM "ejb-j2ee-engine.dtd">
<ejb-j2ee-engine>
<enterprise-beans>
<enterprise-bean>
<ejb-name>GetMailAttachment</ejb-name>
<jndi-name>GetMailAttachment</jndi-name>
<session-props/>
</enterprise-bean>
</enterprise-beans>
</ejb-j2ee-engine>
EJB-JAR.XML
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans
2.0//EN"
"http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<description>EJB JAR description</description>
<display-name>EJB JAR</display-name>
<enterprise-beans>
<session>
<ejb-name>GetMailAttachment</ejb-name>
<home>com.sap.aii.af.lib.mp.module.ModuleHome</home>
<remote>com.sap.aii.af.lib.mp.module.ModuleRemote</remote>
<local-home>com.sap.aii.af.lib.mp.module.ModuleLocalHome</local-home>
<local>com.sap.aii.af.lib.mp.module.ModuleLocal</local>
<ejb-class>sample.GetMailAttachment</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
</session>
</enterprise-beans>
</ejb-jar>
SENDER MAIL ADAPTER modules
1 AF_Modules/PayloadSwapBean Local EB 1
2 GetMailAttachment Local EB 2
3 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local EB 3
1     swap.keyName          payload-name
1     swap.keyValue          MailAttachment-1
RECEIVER FILE MODULES
1     localejbs/AF_Modules/DynamicConfigurationBean     Local Enterprise Bean     1
2     localejbs/CallSapAdapter                    Local Enterprise Bean     2
1     key.0          write http://sap.com/xi/XI/System/File FileName
1     value.0          message.interface
VARIABLE FILENAME SUBST WITH ASMA TURNED ON
fName     message:interface_name
JAVA SOURCE
package sample;
import javax.ejb.CreateException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import com.sap.aii.af.lib.mp.module.Module;
import com.sap.aii.af.lib.mp.module.ModuleContext;
import com.sap.aii.af.lib.mp.module.ModuleData;
import com.sap.aii.af.lib.mp.module.ModuleException;
import com.sap.engine.interfaces.messaging.api.Message;
import com.sap.engine.interfaces.messaging.api.MessagePropertyKey;
import com.sap.engine.interfaces.messaging.api.TextPayload;
import com.sap.engine.interfaces.messaging.api.XMLPayload;
import com.sap.aii.af.service.cpa.Channel;
@ejbHome <{com.sap.aii.af.lib.mp.module.ModuleHome}>
@ejbLocal <{com.sap.aii.af.lib.mp.module.ModuleLocal}>
@ejbLocalHome <{com.sap.aii.af.lib.mp.module.ModuleLocalHome}>
@ejbRemote <{com.sap.aii.af.lib.mp.module.ModuleRemote}>
@stateless
<code>GetMailAttachment</code>
@SuppressWarnings("unused")
public class GetMailAttachment implements SessionBean, Module {
     private static final long serialVersionUID = 7612238514043673502L;
     private SessionContext myContext;
     private MessagePropertyKey myFileName;
     public void ejbRemove() {
     public void ejbActivate() {
     public void ejbPassivate() {
     public void setSessionContext(SessionContext context) {
          myContext = context;
@throws CreateException
     public void ejbCreate() throws CreateException {
     public void getMessageProperty(MessagePropertyKey FileName) {
          myFileName = FileName;
@param moduleContext
           Contains data of the module processor that might be important
           for the module implementation such as current channel ID
@param inputModuleData
           Contains the input XI message as principal data plus eventual
           set supplemental data
@return ModuleData Contains the (changed) output XI message. Might be the
        response message if the module is the last in the chain.
@exception ModuleException
               Describes the cause of the exception and indicates whether
               an retry is sensible or not.
     @SuppressWarnings("deprecation")
     public ModuleData process(ModuleContext moduleContext,
               ModuleData inputModuleData) throws ModuleException {
          try {
               Message msg = (Message) inputModuleData.getPrincipalData();
               TextPayload payload = msg.getDocument();
               String contentType = payload.getContentType();
               // Content Type could be something like
               // text/plain;charset="UTF-8";name="file.txt"
               contentType = contentType.replaceAll("\"", "");
               int i = contentType.lastIndexOf("=") + 1;
               String fileName = contentType.substring(i);
               msg.setMessageProperty(myFileName, fileName);
               inputModuleData.setPrincipalData(msg);
          } catch (Exception e) {
          return inputModuleData;
JAVA ERRORS
2009-02-04 11:41:14     Information     Mail: calling the module processor for channel LMK_Common_Mail_Sender
2009-02-04 11:41:14     Information     Swap: swapping by payload-name ? MailAttachment-1
2009-02-04 11:41:14     Information     Swap: successfully swapped
2009-02-04 11:41:14     Information     Mail: message leaving the adapter (call)
2009-02-04 11:41:14     Information     The application tries to send an XI message asynchronously using connection AFW.
2009-02-04 11:41:14     Information     Backward validation is enabled
2009-02-04 11:41:14     Error     Unable to validate the message with message ID 8702df71-f254-11dd-9b9b-001a64a73518
2009-02-04 11:41:14     Error     Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14     Error     Mail: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Content is not allowed in prolog.
2009-02-04 11:41:14     Error     Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException

Error with the Receiver JMS Adapter (Connection On-Demand feature)

Similar Messages

Maybe you are looking for