Error when configuring Sender File Adapter (XI 7.0)

Hi all,
After i had configured my Sender File Adapter of Communication Channel 'CC_SEND_MATERIAL_FILE', an error message for this Communication Channel (in Runtime WorkBench/Component Monitoring/Adapter Engine/Communication Channel Monitoring) occurred as below:
Error: com.sap.aii.af.ra.ms.api.DeliveryException: java.net.MalformedURLException: unknown protocol: dest
I think that all configurations for this Sender File Adapter are correct. But i don't know where is protocol "dest" and how can i correct this protocol.
Could anyone please help me to resolve this problem?
Thanks for all in advance,
Vinh Vo

Hi Sarvesh,
Yes, i have configured the source file with the path in the AL11. I think all an other configurations are also OK. But i don't know what is protocol 'dest'.
Anybody can explain and help me, please!
Vinh Vo

Similar Messages

Getting error when configured sender mail adapter

Hi Everyone,
When i tried configuring sender mail adapter am getting these logs in Runtime workbench.
In ID,when i gave ip address in place of URL, am getting this log
"exception caught during processing mail message; java.io.IOException: unexpected password response; read -ERR Logon failure: unknown user name or bad password."
When i gave URL in place of URL, am getting this log
"exception caught during processing mail message; java.net.UnknownHostException:"
why is it giving this log, What correction i have to do to make it work.
Thanks in advance,
Sakthi

Hi,
<i>1.How to stop deleting mails.</i>
When the IMAP4 protocol is used, we get an option "Delete messages when read".You could specify if you need to delete it or not.
<i>2.How to do mapping for an attachment,what additional things i have to do for this.</i>
Could you please elaborate?
<i>3.Is there any option to change the flag of mail once it is read by XI.</i>
You cannot do this from XI. You would need to do it in your email client. In case you are using IMAP4,you could mark the message as read, once XI reads the unread message.
Regards,
Smitha.

How to get the filename in mapping when using sender File adapter?

hi Experts,
   I have scenario where XI reads the input file using Sender file adapter.
   The file name is configured in the communication channel.
   In my message mapping it is possible to read this file name?
Thanks
gopal

Hi Gpoal,
Use Dynamic Configuration - /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards,
Geetha

How to configure Sender File Adapter to pick couples files in order !!

Hi Folks,
I am really looking for one requirement like, Sender file adapter has to pick multiple files by file name based with some time gap? Can we?
I have got one BPM in this, I have tried with Process mode : Name and Date, with wait step on BPM, but no use. The way how PI behaving, if 40 files in file directory, it is picking all files in one shot. Start processing but not in order.
The problem is on Receiver system side. The receiver system is SNC system, if old data receives later than earlier date data; we get data obsolete application error.
Ex: If I receive 25th and 26th files, first I need to process 25th first on PI sends to SNC, I need to give some time gap and pick another file or even PI picks and process 26th file, no problem but I need to give some time gap to send SNC to this 26th date file?
Please how guys, throw me your great ideas
Thanks in advance!!
Regards
San

@ Sandhya
If there are 40 files , can you please specify how many types of files are ther like say first A type shud be picked then B type then C type and so on so forth ?
LIke in my case I had only three types of files file1 and file 2 file 3
and in the directory also only three files will be placed at a time
you need to have some logic to separate the type of files in differnt folders and then process them
@ farooq yes . it will create problem if 40 files are kept at a time .
Regards
Ninad

Configure Sender File adapter dynamically

Hi,
I need to configure the sender file adapter dynamically. Ex: I will be providing the src dir , file name etc dynamically. I think this is not possible using module because module gets executed after file is picked (in my case file dir and file names need to be determined dynamically). I even don't won't to use directory API for craeting my file sender comm channel. Is there any other way to achive this.
Regards,
Rakesh

Hi Rakesh,
what is the Operating system of the PI server? Could you please kindly explain what conditions determine filename and source directory? I do not think there is anyway you can determine src file and dir names dynamically in PI.
Here is what you can try.
PI server is on windows system u need batch file. If its on unix or Linux you need scripts. Now what you have to do is place all files in a directory. Here the script/batch file will run continuously in background. Once it gets files it will rename files based on file content or file name then move them in different directories as per your conditions. your interface must have multiple communication channels and sender agreement (with diffrent parties) which will pick up those files from these directories.
The name of directories will be fixed in each channel.
regards
Anupam

Error with the Sender file adapter

Hello Gurus,
My scenario is Web service to file... but to initiate webservice i am using file sender adapter.
I am keeping one dummy file and then file sender adapter will read it and then call the soap adapter.... then it will process the request and generate the response file.
But now my problem is.... suppose there is some problem in receiver and the file is not getting picked up from the source.... then when next time i will resolve the error... and again try to pick the file... it will still give error that "MESSAGE NOT FOUND".
but if i will change the file name while picking it will pick up the file... M not able to understand that y it is happening... can anyone help me in this plzzzzzzzzz....
Let me know if any more information is required..
Thanks in advance..
Hetal

Thanks Gaurav.
You need to generate the files in sequence. I think EOIO should help you with this as it can help generated unique ID for messages in a Q.
Response : in Message Monitoring
Send binary file "edw_lms_traininighist.txt" from FTP server "aixedistg:/ercot/data/xi/lms/outbound", size 171 bytes with QoS EO
2008-10-27 11:59:16 Success RRB: entering RequestResponseBean
2008-10-27 11:59:16 Success RRB: passing through ...
2008-10-27 11:59:16 Success RRB: suspending the transaction
2008-10-27 11:59:16 Success Application attempting to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
2008-10-27 11:59:16 Success RRB: leaving RequestResponseBean
2008-10-27 11:59:16 Success Trying to put the message into the call queue.
2008-10-27 11:59:16 Success Message successfully put into the queue.
2008-10-27 11:59:16 Success The message was successfully retrieved from the call queue.
2008-10-27 11:59:16 Success The message status set to DLNG.
Check if you see anything in logs. If nothing check the LOGGING_SYNC is 1 or not in SXMB_ADM
Its already there in place.But still getting error.
Thanks,
Hetal

German umlauts :Sender File Adapter

Hi,
I am trying to configure Sender File adapter,but it is not working properly for German umlauts.
I have tried encoding UTF-8, UTF-16, ISO-8859-1,ISO-8859-2, ISO-8859-5 but none of them are working.
Can anyone please help me out in this.
Thanks a lot.
Regards,
Shweta

Hi Stefan,
I have already added this module exactly in the same way.
But can you please confirm the sequence
Module :
localejbs/AF_Modules/PayloadSwapBean                     Local Enterprise Bean     swap
localejbs/AF_Modules/MessageTransformBean     Local Enterprise Bean     Transform
localejbs/AF_Modules/MessageTransformBean     Local Enterprise Bean     Transform
Transform.ContentType                     text/plain;charset="UTF-8"
Transform.ContentDisposition            attachment;filename="ABC.csv"
Also,I noticed one thing
The content is corrupted in SXI_MONITOR but it is correct in payload of File as well as Mail adapter in Message Monitor(RWB)
Thanks.
Regards,
Shweta

Is Sender File Adapter always throws error when there is no file?

Hi,
I have a simple question but can't find a straight answer to it. I have a Sender File adapter that configured to pick up file XXX* from FTP server every 1 hour. But a file can come every 2, 3, or 7 hours- no certain time.When there is no file I got "File not found " error. As we use alerts, this behaviour is not acceptable.
Does this error comes always if there is no file? Any possible way to avoid this error ?
Thanks for help.
Nataliya

Hi Ravi,
I can see the error in Runtime Workbench under CC monitoring. To be precise it says:
An error occurred while connecting to the FTP server '1X.1XX.XX.XX:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 552 RMS-E-FNF, file not found, ES4_SAP*'. For details, contact your FTP server vendor.
My ftp server has the following set up:
Server: xx.xxx.xx.xx
Port:21
Dataconnection:Active
Timeout:120
Connection secuirity: None
User name .... etc set up.
Connect mode: Per file transfer
Transfer mode:Text
QoS:EO
Pollinterval: 120 (for test purposes)
Processing Mode: delete
Can it be that its a ftp server generates error and sends back to XI?
Thanks,
Nataliya

System error when send file with Sender File Adapter

Hi all,
I have configured a "File To ABAP Proxy" scenario. After configuring, i executed a "Test Configuration" in Integration Directory and it's all OK. But this file unable to reach into ABAP Proxy Target. In the Runtime WorkBench\Message Monitoring, I get an error message in below:
Engine: Adapter Engine
Status: *System Error     *
Start: 15.08.2008 14:04:01
End: 15.08.2008 14:19:01
Sender Service: BS_XI_SERVER
Interface Servic: urn://FILE_TO_PROXY
MI_EMPLOYEE_OB
In this case, I don't know why my Sender File Adapter is error and why status is "System Error" and why it can't reach into Target System. Can it concern a role user?
( For more clearly: I configured the source file and the path correctly. And i used the xml file with the content and the document name correctly. In general, the Sender Adapter File don't convert the sender file and its content is same as the Payload in the "Test Configuration", i think it is all OK.)
Could anyone please help me to resolve this problem, anyone can explain this error, how can i resolve this error?
Thanks a lot in advance,
Vinh Vo

Hi Chirag,
1.I source structure is very simple as below:
<ns0:MT_MATERIAL xmlns:ns0="urn://FILE_TO_PROXY">
   <MATERIAL>
      <WERKS>1000</WERKS>
      <MATNR>MAT00001</MATNR>
      <MAKTX>Chemical Material</MAKTX>
   </MATERIAL>
</ns0:MT_MATERIAL>
2. the Communication Channel Monitoring in Runtim WorkBench\Adapter Engine is OK for my Sender File Communication Channel, it's in Blue Light.
However, i don't know what's FCC?
Thanks and best regards,
Vinh Vo

Errro when referring a Bean in Sender file adapter

Hi
I have created a sample code and deployed in the server and when i refer that in the sender file adapter module processor using the naming format
localejbs/sap.com/com.vas.mod/GetFileNameBean
where
com.vas.mod is the EAR Project name
GetFileNameBean is the Bean name
I am getting the erro in the XI Adaptor monitor as follows
<b>- 2006-07-31 13:06:51 UTC: Error: NameNotFoundException: Path to object does not exist at com.vas.mod, the whole lookup name is localejbs/sap.com/com.vas.mod/GetFileName.</b>
I checked theJNDI name in the server it is exactly the same.
can some one help me on this please?
vasagam R K

Hi Vasagam,
Please check these threads..
They deal with ur question...
NameNotFoundException during JNDI lookup for Deployable WebService Proxy
Strange Lookup Error (SAP Resource Adapter)
cheers,
Prashanth
P.S Please mark helpful answers

Archive file with errors in sender file adapter not working! please help!

Hi Experts,
I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
What am I missing? DO I need to do some more configurations?
What are the prerequisites if any for this option?
How to test this?
Please help me! I will be greatfull to you all!
Thanks & Regards
Gopal

and go thru this links
Creating a Single Archive of the Version Files
http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Error in sender file adapter: source directory does not exist

Hi,
The PI system is 7.11
I've created sender file adapter with following details:
Transport Protocol : File System
Source directory: /interfaces/In
I checked in AL11 that this path really exists and it does. (I can even see the .txt file that should be processed.)
But still i get in Communication Channel Monitoring the following error:
"Configured Source directory "/interfaces/In" does not exist.
(i also tried to give the source directory as "interfaces/In" and as "//interfaces/In" but still the same error.
Any suggestions as to what is wrong?
kr
Robert

Actually, Need to use forward slash (/) to separate directory names in accordance with the Java specification.
But wanted to try if that works..
Also check directory name , path again as this is case sensitive...
--Divyesh

File to SOAP,error in sender file adapter

Hi,
I am doing a scenario FILE to SOAP where In file adapter I am using Quality od service as Exactly once in order.I am getting the below error.It works fine when I use QOS=Exactly once.Not sure why,can you guys please help me.Can we really use QOS-EOIO for sender file adapter,where exacly do we use it.
Thanks
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Edited by: guest xi on Apr 16, 2008 11:55 AM

Hi,
Thanks for your replies guys.I diid give the queue name ,I dont know what is causing the error.Now even QOS=EO which was working fine before is throwing an error.I am using the same file name for both
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Sender file adapter error

Hi,
The sender file adapter is reading a fixed width file . The file is not to be seen in the sxmb_moni. In the adapter monitoring is showing processed and green in color.
How do i resolve this issue.
In my recordset contains multiple substructures
<Recordset>
        <Header>
             type
             code
             id
        </Header>
        <Item>
                    type
                    qty
                    price
        </Item>
</Recordset>
Header.fieldFixedLengths = 1,5,10
Header.endSeparator = 'nl'
Header.fieldNames = TYPE,CODE,ID
Header.keyFieldValue = 01
Item.fieldFixedLengths = 4,5
Item.endSeparator = 'nl'
Item.fieldNames = QTY,PRICE
Item.keyFieldValue = 02
What should i give in keyFieldValue . Is the above configuration correct.
Kindly suggest
Thanks
Varghese

Hi,
The key field value is normally a record type identifier. For example, a header record may always start with '1' or 'HD', and an item record may always start with '2' or 'IT' in your file. The 'type' field, which appears in both header and item records in your example, fits in as the identifier.
So, your parameters should be:
Header.fieldFixedLengths = 1,5,10 (or maybe 2,5,10)
Header.endSeparator = 'nl'
Header.fieldNames = TYPE,CODE,ID
Header.keyFieldValue = 1 (or maybe HD)
Item.fieldFixedLengths = 1,4,5 (or maybe 2,4,5)
Item.endSeparator = 'nl'
Item.fieldNames = TYPE,QTY,PRICE
Item.keyFieldValue = 2 (or maybe IT)
If your file has varying values of TYPE instead of 1,2 (or HD or IT), the File Adapter will not be able to handle the structured file. You may have to choose the option 'File without content conversion'.
Hope this helps,
Bhanu

Sender File Adapter Problem when text document is a single line.

Hi All,
I have posted this question earlier too. But did not get a proper answer.
I am using File adapter to fetch data from a file system.
My input data is: AA123BB45678AA345BB78564.
It is just reading the first segment i.e.AA123 and not reading the remaining.
How can I configure my Sender File adapter to pick this pattern of data? It works fine if I have line break after each record that is if the input is as below.
AA123
BB45678
AA345
BB78564
In the above there is a Line break after each segment. So File adapter picks it fine.
I have also tried using xml.A.endSeparator equals to blank in the module configuration. But it does not work either.
Can anyone throw some light to this?

Abhi
I tried a different approach to send your file data In..
You can get each line in the source structure in separate row as
<?xml version="1.0" encoding="utf-8" ?>
- <ns:SingleRowDT xmlns:ns="http://xxxxx.com/xi/pocs/sriram">
- <Recordset>
- <row>
<rowElt>AA123BB45678AA345BB78564</rowElt>
</row>
- <row>
<rowElt>AA123BB45678AA345BB78564AA123BB45678AA345BB78564</rowElt>
</row>
- <row>
<rowElt>AA123BB45678AA345BB78564AA123BB45678AA345BB78564AA123BB45678AA345BB78564</rowElt>
</row>
</Recordset>
Now you can use a suitable mapping logic to split the individual records into the 2 field structure as expected in the target..
Trying your way would be a limitation on file adapter I think..Let me know if this helps..I can give you the content conversion config for this model..
its simply
RecordSet - Leave it empty
RecordSet Seq - Row, *
Recordsets/msg - *
row.fieldSeparator - 'nl'
row.endSeparator - 'nl'
row.fieldNames - 'rowElt
..So each line will be pulled into a single Row in the source structure and then u can apply a specific mapping to split into 2 fields for your target
Regards
Sriram V.
Regards
Sriram V.

Error when configuring Sender File Adapter (XI 7.0)

Similar Messages

Maybe you are looking for