Error with Unit of Measure 'CAR' ISO Code

Hi gurus,
My client has EDI setup for POs for a vendor. Whenever they create a PO for a specific material with Ordering UoM as 'CAR' (carton), output is going into errors and no Idoc was generated. The error message refers to 'ME764' - "Not possible to determine ISO code for unit of measure CAR in item 00090". But, ISO code was perfectly defined for the UoM CAR (I checked in CUNI). When debugged, I found that the UoM CAR has an internal format as 'KAR' and SAP standard function module 'UNIT_OF_MEASURE_SAP_TO_ISO' is looking for ISO code of 'KAR' and throwing this error message for 'CAR'. Have you guys ever faced similar problem and any solution for this behaviour? We use SAP ECC 6.

hi
go to CUNI
select ISO codes give new entry for CAR
then save and come back in CUNI select the UOM then double click onur unit at right u will get field of ISO code give iso code here and save
regards
kunal

Similar Messages

Getting No measurement unit is assigned to ISO-Code in BAPI_SHIPMENT_CREATE

I have been entering all the required value in order to create a new shipment number linked to a delivery number and am getting the return: No measurement unit is assigned to ISO-Code SEC
Could someone please help me or guide me in another direction to create a shipment number?
Thank you in advance

Thx for the fast reply.
I sent an OSS to SAP and they replied with this:
If there is a different order price unit in the purchase order, the
fields Quantity in order price unit (PO_PR_QNT) and Order price unit
(PO_PR_UOM), or Order price unit in ISO code (PO_PR_UOM_ISO) must be
filled as well.
As in your case, 'Order Unit' and 'Order Price Unit' may not the same,
you need to input the above mentioned fields as well.
Can someone tell me where are the fields mentioned above? None of the parameters have these fields.
Thanks in advance

No measurement unit is assigned to ISO-Code SEC

hI ALL,,
am getting this error No measurement unit is assigned to ISO-Code SEC when is use ny bapi bapi_shipment_create.
to avoid this what i need to pass and where?
Please advise.... am unable to create shipment because of this..

u need to pass UOM ISO code as well. Pass ISO code value to below structure field.
BAPISHIPMENTHDUNITEM-SALES_UNIT_ISO

PO outbound IDOC - Issue with Unit of measure

Hi,
I am facing issue with unit of measure.
1) In the PO outbound idoc in segment E1EDP01, the unit is always converted into ISO code and sent. Is there any way to avoid it.
2) Now while changing unit to ISO code, it checks if it is preset in T006 table. Now in some of the cases like Unit FT3, there are no entries in T006 table, hence IDOC is going into error. Let me know how can this be resolved. Do I need to update T006 table if yes then how can I do it.
Thanks.
Regards,
Shahu

Sorry.. Posting it in ABAP Development forum.

PO outbound interface - Issue with Unit of measure

Hi,
I am facing issue with unit of measure.
1) In the PO outbound idoc in segment E1EDP01, the unit is always converted into ISO code and sent. Is there any way to avoid it.
2) Now while changing unit to ISO code, it checks if it is preset in T006 table. Now in some of the cases like Unit FT3, there are no entries in T006 table, hence IDOC is going into error. Let me know how can this be resolved. Do I need to update T006 table if yes then how can I do it.
Thanks.
Regards,
Shahu
Edited by: shahuraj shirure on Mar 5, 2008 1:06 AM

Its always that while sending Units from SAP, it needs to be sent in ISO code and SAP always receives units of measure in the ISO unit format only.

Problem with Unit of measurement

Hi,
I am having problem with Unit of measurement with different languages.
Eg:
In SPRO, I am able to see the unit of measure T3 Description: (Trading unit). in SAP 200 client .the logon language is EN(english).
But if I logon into same client(200) with different language DE(german) version, I am not able to see the description in German, the description field is blank.
Kindly give me a solution for this problem as it is very urgent.
Thanks in advance.
Regards,
Shankar

Hi Aishwarya,
I can think of 2 possibilities:
1. You need to verify passing the Target UoM with the ISO Code as well as the update flag in the 'X' structures.
2. The material that you are trying to pass some UoM does not have the conversion maintained in the Material Master. (Base UoM --> Target UoM conversion in Material Master, contact Functional Consultant).
Also, if you can verify by performing the action manually and check if the Sales Order is getting created manually with the Target UoM .
Regards,
Pranav.

Error of Unit of Measure in Invoice Parking

Hi ,
I am trying the invoice parking from a vendor portal by using BAPI_INCOMINGINVOICE_PARK ... we have created ZPTP_INVOICE_PARK function module for it ... now I have an issue that when I am paassing the following fields
in FM
LIFNR : 107411
Header table entries
Doc_date : 01.06.2011
Gr_date : 01.06.2011
Com : 1500
Curre : INR
Gross amt : 46676.22
Vendor Inv : keep blank
DO : keep blank
Vendor Inv Amnt : 46676.22
Input Table IT_INV_Table
EBELN     1540027236
EBELP     00020
MBLNR     5000781648
MJAH     2011
ZEIL     0001
MW     01
ITM_AMT     46676.22
WAERS     10
PO_QTY     50
MENGE : 50
MEINS : EA
Now,I am getting an error that "Unit of measure SET differs from unit of measure EA in order item 1540027326 00020" where my 00020 item no. is having UOM as EA and item no. 10 is having UOM as SET(and it is a deleted line item ).
My question is why it is saying unit diffres as even in FM I am giving the right UOM i.e. EA
While SET is a unit of first line item which is deleted.

Thanks for the response.
But the Unit is not fixed for D. there are number of transaction takes place and accordingly the units are. That is why I can not hard code it.
Plz advice.

While making changes in alternate Unit of measure CAR it makes changes

While making changes in alternate Unit of measure CAR it makes changes in other alternate Unit of measure KAR.
Both are having same ISO unit CT.Please suggest why it is happening.

your units have probably a conversion rate to the SI unit in its definition.
you can see this in CUNI, open your unit in detail and look at the lower left part

Bus. Entity - Default Unit of Measurement per Company Code

Experts, I have assigned the default units of measure in "Make Basic Settings in Company Code" config. Surprisingly these entries don't show up in "Default Unit of Measurement per Company Code" config under Business Enity. Also, I cannot add those entries.
Please treat this as urgent!
Thank you.

Hi,
Goto RealEstate (not RE-FX, though you are using RE-FX) \ Basic settings \ Basic Setting for Company codes / Financial asset management, select checkbox of Fin Asset Mangmt for your company code.
Now you can see this company code in company code level settings for company code in business entity level.
Really i dont know why we have to check that checkbox of Asset management to allow at business entity level, but we have to.
regards,
Srini

Default Unit of Measurement per Company Code

Dear Gurus,
I'm trying to specify Default Unit of Measurement per Company Code into RE customizing but I can't make new entries or modify existing into change view.
How can i solve my requirement?
Than you in advance,
Fuffo

Hello Ute,
we made all basic settings:
-activate RE-FX
-make settings in company code
-activate RE manaagement in controlling area
Into company code settings we mainteined DEFAULT UNIT OF MEASURE but into S_ALN_01001235 we can't find related entries.
Any suggestion?
Thank you in advance,
Fuffo

No measurement unit is assigned to ISO-Code SPACE in BAPI_INCOMINGINVOICE_CREATE

Dear expert
I know this issue is very old and I searched most of this discussion.
But we still cannot solved the issue.
1.Our system configuration is no problem in CUNI.
2.We set the relates unit and ISO code in the BAPI patamter.
This issue still happend and we cannot reappear in the production system.
Although user face this issue.
It is appreciaed that some experts could help me.
User always face this issue we could not found any reasn and cannot reappear in production system.
Our code for related unit is :
WL_ITEMDATA-PO_UNIT          = WG_YMT0002S-BSTME.
CLEAR WL_T006.
      READ TABLE TG_T006 INTO WL_T006
        WITH KEY MSEHI = WG_YMT0002S-BSTME.
      IF SY-SUBRC = 0.
        WL_ITEMDATA-PO_UNIT_ISO     = WL_T006-ISOCODE.
      ENDIF.
      WL_ITEMDATA-PO_PR_UOM         = WG_PODATA-BPRME.
      CLEAR WL_T006.
      READ TABLE TG_T006 INTO WL_T006
        WITH KEY MSEHI = WG_PODATA-BPRME.
      IF SY-SUBRC = 0.
        WL_ITEMDATA-PO_PR_UOM_ISO   = WL_T006-ISOCODE.
      ENDIF.
Thanks in advance.

Dear experts
Your answer will be helpful.
Except the ISO code is space, is there any othere possibility to happend this error?
Thanks in advacne.

Measurement Unit PC has no ISO code

Hello,
I am trying to upload PML messages into AII from The test tool. The messages are stuck into the queue with the Error Message as mentioned in the Subject. I have defined the ISO code for the PC UOM but still I am unable to resolve this.
Any help will be welcome.
Regards,
Amit

Dear Manoj,
After you maintain the ISO Code, try to retransfer the PR again from SMQ1, and if there's still error, check to SRM--Tcode SLG1, and see what's the error.
Regards,
w1n

Risk in populating Unit of measure for commodity code (foreign trade) in ECC

We have recently implemeted product classification in GTS for the EU and US. We want to implement the transfer of tariff data from GTS to ECC via the standard GTS transactions /SAPSLL/SWN_RTR and /SAPSLL/SWN_RTR_R3.
Our compliance team is concerned about beginning to populate the unit of measure commodity code in ECC. I know this field is only visible when a supplementary unit is on the tariff number and is different than the base unit of measure on the material master. These additional units of measure must be configured in order for the XML tariff files to load properly.
One concern that has come up is the conversion of the base UoM to the new unit of measure from the tariff files. Are there other issues/risks I need to be aware of? My understanding is this unit is used only when reporting the products to the customs authorities.
I appreciate any guidance you can give me.

Hello Alison,
We implemented this, however, made an enhancement not to transfer the UOM to ECC. Our consultants are unable to clearly articulate the use of UOM in classification. I still have not have a complete grasp of UOM with classification. One thing we constantly run into, is job fails when external/internal UOM is not maintained during transfer of classification from GTS to ECC. Since we are not transferring UOM to ECC, we are now considering enhancement, so we do not have to maintain internal/external UOM from the files we receive from Customs Info. We have had a number of issues trying to figure out what to maintain as internal UOM for UOM sent by Customs Info. There is no ISO code to cross reference and makes it very difficult to figure this out.
Another thing that you need to be aware off - if you have products that is not classified in GTS and you have classification maintained in ECC, you can overwrite ECC values with blanks- the product master change/update date (for anything - not just classification) is picked up by the re-transfer job. We are currently making enhancements in the commodity code retransfer program, only to transfer when there is a value in GTS for classification.
I see Dave's message above " UoM is necessary for the calculation that supports your sourcing decisions as well as for your declarations to the authorities". I am really interested to understand the function of UOM in classification.
Regards,
Padma

Error as unit of measure PC not defined for language RO while creation ofPO

Hi GUYS,
When am trying to create a PO in ME21N transaction i got error as below,
unit of measure PC not defined for language RU
Message no. 06079
Table 006A contains no entry for this unit of measure
Please let me know what action to be taken from my side to over come this issue.
Note: If i check the related vendor i could able to view that the language maintained as RU.
Cheers,
Kumar.S

Hi Jurgen,
Thanks for your reply once again.
As mentioned by you earlier i have tried to login with languae RU in Q system but unfortunately i got an error saying taht language not installed.
Also we found for Language - EN and UOM - PC has been maintianed in T006A table.But if i check for lanugage - RU and UOM PC combinatoin has not manintaned in T006A table.
Please let me know how to maintain the values in this table T006A for combination Lang - RU and UOM - PC.
Please revert back with your soilution.
Note: I have tried in SM30 but failed due to below error
The maintenance dialog for T006A is incomplete or not defined
Cheers,
Kumar.S

How to correct CIF error Base unit of measure does not exist?

Dear experts,
I'm trying to cif a location product with base unit of measure KG in R/3 and alternative unit of measure well maintained.
it gives me a CIF queue saying that
"Base unit of measure ZXX does not exist (Product 0000000000000XXXXXX has not been created)"
I do not understand why, the unit ZXX does not exist in the alternative unit of measure for any of the materials managed
I also checked CUNI table and ZXX is not there neither in R/3 or APO,
Thanks for your help
E

Looks like the Alternate UOM --Zxx is not maintained in APO.
2 ways to do this:
(1) program- RSIMPCUST
Re transfer all your UOM settings from R3 to APO
(2) Manual Maintenance in APO:
SPRO>SAP NETWEAVER>GENERAL SETTIGNS>Check UNits of Measurement
Thanks
Kumar

Error with Unit of Measure 'CAR' ISO Code

Similar Messages

Maybe you are looking for