Error within FIELD-command in dailogue-program (Release 4.6B)

Hello together,
I have a problem with a table-control in release 4.6b:
We use the FIELD-command to transport the data from the screen to the ABAP-report.
The field, which makes trouble is a currency-value (Format: CURR in the screen).
The ABAP-field has the data type IKPSU (domain CURR 15,2).
Is there any possibility to check this data transport from the screen to the ABAP-field?
Kind regards
Udo

I forgot to tell the concrete problem:
When I put in a negative-value I get an error-message but I don't know why.....
Kind regards
udo

Similar Messages

"Could not complete the save command because of program error."

Dear all,
I am having problems saving jpegs on Photoshop CS3. I use windows XP professional. I am saving using the save menu (not save as). I am using a saving archive, where folders are within folders. I am trying to save images which have been copy and pasted from the web.
The message I get is:
“Could not complete the save command because of program error.”
Has anyone got this message, and know how to solve it?
Helen

I think My Documents is a local folder.
I would avoid saving to deeply buried folders because the path will be too long.
If the problem still persists, try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

When i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program

when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
i am using office2007 with windows7 premium home edition. i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
a real PITA. anyone have any solution for this? Thanks
ken yanow

Hi,
Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
Click the Microsoft Office Button, and then click Excel Options.
Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
check box in the General area.
Click OK.
If the problem cannot resolve, the Run as administrator may selected.
Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
Right-click EXCEL.EXE > Properties >
Compatibility tab.
Under Privilege Level, uncheck Run this program as an administrator
check box.
Best regards.
William Zhou
TechNet Community Support

Excel won't open and error message There was a problem sending the command to the programe

Hi there
I'd be grateful for your help.
I've just bought a new laptop and installed Office 2013. I used Excel 2013, did what I needed to do and saved it. This was 5 days ago.
Today, I've tried opening the file from my desktop and get the error message 'There was a problem sending the command to the program'.
And when I try to open Excel to do the DDE fix, which seems to be the best suggestion, I can't open Excel at all. I've tried to get into it from the Apps screen.
Any help would be gratefully appreciated.
Thanks

Don't seem like this can be fixed so I went back to version 6.0.2 which works good.
I have Chrome now as my default browser and will not use fire fox until they fix it!
Chrome works great!

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
If a shortcut is used while Firefox is already open the error does not occur.

As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve

Could not complete the define custom shape command because of program error

I am using the pen tool to draw a shape and then select it to create a custom shape. I use path: edit - define custom shape = "could not complete the define custom shape command because of program error"
The error message appears once I click the define button.

Also, I solved this another way, seems to happen to me often. I click on the path panel, near layers panel and clicked on 'load path as a selection' (3rd icon on bottom from left), then click 'make work path from selection' (4th icon on bottom from left). Then you will see that the whole work area is part of the selection, including your desired shape/path. In order to change this, just select 'path selection' tool and highlight each corner and delete each point from each corner, then you are left with the desired selection to create a shape. I am self taught and this seem unorthodox, but it works.

I have cc2014 and I want to bridge to DAZ Studio .duf file. In PS I choose File Automate DAZ Studio 3d bridge - get error message "could not complete DAZ Studio 3D Bridge command because of program error". What's going on.

I get error message when trying to open DAZ Studio 3D bridge in PS 2014 from the File and Automate Menu.
Error reads "could not complete DAZ Studio 3D Bridge command because of program error?"
According to User Documentation I should get a dialog box which allows me to click on "Launch DAZ Studio"
Why is there a problem?

You have something messed in with your Photoshop or OS install. You need to troubleshoot that first.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Since upgrading to Firefox 4.0 I keep getting the error message "THERE WAS APROBLEM SENDING THE COMMAND TO THE PROGRAM", please can you advise how I get it to stop?

I have just upgraded to Firefox 4.0 and ever since then I get this message when I try to go to either Yahoo or Gmail
"THERE WAS A PROBLEM SENDING THE COMMAND TO THE PROGRAM",
I had this problem a month or so ago so downgraded to Firefox 3.6 and the problem went away but have now been advised to upgrade which indeed I have and hey presto the error message again, please how can I fix it??

OK, you seem to be running Zone Alarm as your firewall. It includes a utility which checks to see whether a site is safe or not and also adds a plugin to Firefox which is listed as '''npFFApi'''. Can you disable that and see if it makes any difference?
To get to the plugins manager, click the orange Firefox button, then click "Add-ons". In the page that opens, click the "Plugins" link on the left which will open the menu. Then find '''npFFApi '''and click the "''Disable''" button.

When I open Firefox 4 RC1 by clicking an external link (as from my desktop) I get an error: "there was a problem sending the command to the program"

A box with this error: "there was a problem sending the command to the program" always pops up upon clicking any URL sitting in my desktop (or from any other folder). It will not happen if Firefox is already open. However, it is only an annoyance as the page fully opens with no problem.
It started after I downloaded Firefox 4 beta ver 12. It continued after upgraded with RC1. It did not happen in my latest version of Firefox 3.6.x which I removed after installing 4 RC1

This has happened to me many times but on the older FF 3 It could be a small bug, One should list the PC's being used as it could be related? Mine is an E-Machine Mod, W3609 running W7.

I keep getting this error message, there was a problem ending the command to the program, what do I do?

Since upgrading to Firefox 4.0 I keep getting the error message "THERE WAS APROBLEM SENDING THE COMMAND TO THE PROGRAM", please can you advise how I get it to stop?

Security software on your computer/router is the usual cause of this. Turn off/disable or uninstall all anti-virus software & firewalls. Try again.

Error MSB3073: The command exited with code -1

I am getting this error while deploying the biztalk project from visual studio using Deployment Framework for Biztalk (BTDF).
Please guide me what needs to be done. Here's the code :-
<?xml version="1.0" encoding="utf-8"?>

<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003" DefaultTargets="Installer" ToolsVersion="4.0">
<PropertyGroup>
<Configuration Condition="'$(Configuration)' == ''">Debug</Configuration>
<Platform Condition="'$(Platform)' == ''">x86</Platform>
<SchemaVersion>1.0</SchemaVersion>
<ProjectName>HelloWorld</ProjectName>
<ProjectVersion>1.0</ProjectVersion>
<IncludeOrchestrations>False</IncludeOrchestrations>
<IncludeTransforms>False</IncludeTransforms>
<IncludeSSO>True</IncludeSSO>
<UsingMasterBindings>True</UsingMasterBindings>
<RequireXmlPreprocessDirectives>False</RequireXmlPreprocessDirectives>
<ApplyXmlEscape>True</ApplyXmlEscape>
<SkipIISReset>True</SkipIISReset>
</PropertyGroup>
<PropertyGroup>






<ProductVersion>1.0.0</ProductVersion>
<ProductId>084986b1-d675-4383-b0ed-da2e3f4e3998</ProductId>

<ProductName>HelloWorld for BizTalk</ProductName>
<Manufacturer>Deployment Framework User</Manufacturer>
<PackageDescription>HelloWorld</PackageDescription>
<PackageComments>HelloWorld</PackageComments>

<ProductUpgradeCode>4975288c-1b94-4d42-868b-f166cdc02224</ProductUpgradeCode>
</PropertyGroup>



<PropertyGroup Condition="'$(Configuration)' == 'Debug'">
<DeploymentFrameworkTargetsPath>$(MSBuildExtensionsPath)\DeploymentFrameworkForBizTalk\5.0\</DeploymentFrameworkTargetsPath>
<OutputPath Condition="'$(TeamBuildOutDir)' == ''">bin\Debug\</OutputPath>
<OutputPath Condition="'$(TeamBuildOutDir)' != ''">$(TeamBuildOutDir)</OutputPath>
<DeployPDBsToGac>false</DeployPDBsToGac>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)' == 'Release'">
<DeploymentFrameworkTargetsPath>$(MSBuildExtensionsPath)\DeploymentFrameworkForBizTalk\5.0\</DeploymentFrameworkTargetsPath>
<OutputPath Condition="'$(TeamBuildOutDir)' == ''">bin\Release\</OutputPath>
<OutputPath Condition="'$(TeamBuildOutDir)' != ''">$(TeamBuildOutDir)</OutputPath>
<DeployPDBsToGac>false</DeployPDBsToGac>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)' == 'Server'">
<DeploymentFrameworkTargetsPath>Framework\</DeploymentFrameworkTargetsPath>

<DeployPDBsToGac>true</DeployPDBsToGac>
</PropertyGroup>
<ItemGroup>
<PropsFromEnvSettings Include="SsoAppUserGroup;SsoAppAdminGroup" />
</ItemGroup>



<ItemGroup>
<Schemas Include="HelloWorld.dll">
<LocationPath>..\$(ProjectName)\bin\$(Configuration)</LocationPath>
</Schemas>
</ItemGroup>

<Import Project="$(DeploymentFrameworkTargetsPath)BizTalkDeploymentFramework.targets" />

<Target Name="CustomRedist">
</Target>
</Project>
Error :-
Starting build...
C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe "C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" /nologo /t:Deploy /p:Configuration=Debug
Build started 08-04-2015 17:43:51.
Project "C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" on node 1 (Deploy target(s)).
SetModeDeploy:
DEPLOYING APPLICATION TO BIZTALK...
SetWinVer:
Running on Windows V62
Detected IIS 7
Detected 64-bit OS
GetSoftwarePaths:
Using .NET Framework Install Path 'C:\Windows\Microsoft.NET\Framework\v4.0.30319'.
Using BizTalk Install Path 'C:\Program Files (x86)\Microsoft BizTalk Server 2013\'.
Using Deployment Framework Install Path 'C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\'.
Using Deployment Framework Tools Path 'C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools'.
Using BizTalk ESB Toolkit Install Path 'C:\Program Files (x86)\Microsoft BizTalk ESB Toolkit\'.
ExportSettings:
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\EnvironmentSettingsExporter.exe" "C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\SettingsFileGenerator.xml" "C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings"
Environment Settings Spreadsheet to XML Exporter 1.6.1
[http://EnvSettingsManager.codeplex.com]
Copyright (C) 2007-11 Thomas F. Abraham. All Rights Reserved.
Importing from SettingsFileGenerator.xml...
Output format is XmlPreprocess (multi-file).
Exporting to Exported_LocalSettings.xml...
Exporting to Exported_DevSettings.xml...
Exporting to Exported_TestSettings.xml...
Exporting to Exported_ProdSettings.xml...
Finished.
InitSettingsFilePath:
Using settings file C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml
SetPropertiesFromEnvironmentSettings:
Setting properties from environment settings file (C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml)
Setting property to value 'BizTalk Application Users'.
Setting property to value 'BizTalk Server Administrators'.
InitializeAppName:
BizTalk Application Name is HelloWorld
PreprocessBindings:
Checking syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml'...
Syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml' appears to be valid.
Clearing file attributes for 'PortBindings.xml'.
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\xmlpreprocess.exe" /v /c /noDirectives /i:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml" /o:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" /d:CurDir="C:\BTDF\Walkthrough1" /s:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml"
XmlPreprocess v2.0.18.0
Copyright (c) 2004-2013 Loren M Halvorson
XML File Preprocessor
Settings XML file: "C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml"
Preprocessing "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindingsMaster.xml" to "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml"...
PortBindings.xml : Set the value 'HelloWorld' of 2 node(s) matching XPath '//ApplicationName'.
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\ElementTunnel.exe" /i:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" /o:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" /x:"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\adapterXPaths.txt" /encode+
Nested XML Encoder/Decoder v5.5.100.0
Copyright (C) 2005-2014 Scott Colestock, Tim Rayburn, Thomas F. Abraham
XML encodes/decodes content of element(s) by XPath. Applies escaping rules such
as > for '<'. Namespace decls, PIs, etc. of nested XML are not preserved.
XPaths : 16
Transformed Nodes : 0
Empty Nodes (skipped) : 3
No Transform Req'd (skipped) : 3
Total Matched Nodes : 6
Complete - output file has been saved.
Checking syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml'...
Syntax of XML file 'C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml' appears to be valid.
DeployFileAdapterPhysicalPaths:
Configuring FILE adapter physical paths from binding file PortBindings.xml...
Processing FILE adapter physical paths (Send)...
Setting up path 'C:\BTDF\Walkthrough1\Out'...
Directory already exists.
Granted 'BUILTIN\Users' Full Access permissions.
Processing FILE adapter physical paths (Receive)...
Setting up path 'C:\BTDF\Walkthrough1\In'...
Directory already exists.
Granted 'BUILTIN\Users' Full Access permissions.
TerminateServiceInstancesConditional:
Attempting to terminate all service instances for BizTalk app 'HelloWorld'...
Terminated 0 service instances for BizTalk app 'HelloWorld'.
VerifyBizTalkAppExists:
Checking for existence of BizTalk application 'HelloWorld'...
Did not find BizTalk application 'HelloWorld'.
DeployAppDefinition:
BTSTask.exe AddApp -ApplicationName:"HelloWorld" -Description:"HelloWorld"
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Adding new BizTalk application "HelloWorld" to configuration database (server="BDDBESBWMV01", database="BizTalkMgmtDb")...
Information: Added application "HelloWorld".
Command succeeded with 0 errors, 0 warnings.
UndeploySchemas:
Adding assembly name 'HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f' to item group.
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\gacutil.exe" /u "HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f"
Microsoft (R) .NET Global Assembly Cache Utility. Version 4.0.30319.1
Copyright (c) Microsoft Corporation. All rights reserved.
Number of assemblies uninstalled = 0
Number of failures = 0
DeploySchemas:
BTSTask.exe AddResource -Type:BizTalkAssembly -Source:"..\HelloWorld\bin\Debug\HelloWorld.dll" -ApplicationName:"HelloWorld" -Options:GacOnAdd,GacOnImport,GacOnInstall
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Adding resource (-Type="System.BizTalk:BizTalkAssembly" -Luid="HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f") to application "HelloWorld"...
Serialized BizTalk assembly "HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f" from "..\HelloWorld\bin\Debug\HelloWorld.dll".
Information: Validating resources (count=1)...
* Validating resource (-Type="System.BizTalk:BizTalkAssembly" -Luid="HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f")...
Information: Performing change requests...
Information: Calling BeginTypeChangeRequest for all selected resource types...
PerformingBeginChangeRequest
Adding resource (-Type="System.BizTalk:BizTalkAssembly" -Luid="HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f") to store.
Information: * Performing change request on type "System.BizTalk:BizTalkAssembly" (count=1)...
Information: Deploy server="BDDBESBWMV01" database="BizTalkMgmtDb" assembly="C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll"
Information: Installed the "C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll" assembly into the Global Assembly Cache. (force=True)
Information: Deploy operation succeeded.
Information: Deploy server="BDDBESBWMV01" database="BizTalkMgmtDb" assembly="C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll"
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.POSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.InvoiceSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved map "Microsoft.Samples.BizTalk.HelloWorld.POToInvoice".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.POMessageType".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.InvoiceMessageType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.ReceivePOPortType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.SendInvoicePortType".
Saved orchestration "Microsoft.Samples.BizTalk.HelloWorld.HelloSchedule".
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.POSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved schema "Microsoft.Samples.BizTalk.HelloWorld.InvoiceSchema, HelloWorld, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1a3b87e04e203d0f".
Saved map "Microsoft.Samples.BizTalk.HelloWorld.POToInvoice".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.POMessageType".
Saved message type "Microsoft.Samples.BizTalk.HelloWorld.InvoiceMessageType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.ReceivePOPortType".
Saved port type "Microsoft.Samples.BizTalk.HelloWorld.SendInvoicePortType".
Saved orchestration "Microsoft.Samples.BizTalk.HelloWorld.HelloSchedule".
Information: Installed the "C:\Users\dopdevbiztalkadmin1\AppData\Local\Temp\BT\PID9536\BizTalkAssembly\4b4a4387187988d2dc55c72b16113199\HelloWorld.dll" assembly into the Global Assembly Cache. (force=True)
Information: Deploy operation succeeded.
Information: Deployed the following 1 BizTalk assemblies:
HelloWorld.dll
EXEC : warning : If any of the assemblies were previously loaded by a Host Instance, it may be necessary to restart the Host Instance for changes to take effect. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
Information: Commit the change requests...
* Performing EndTypeChangeRequest for resource type "System.BizTalk:BizTalkAssembly".
Command succeeded with 0 errors, 0 warnings.
DeploySharedAssemblies:
Deploying additional assemblies to GAC...
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\gacutil.exe" /f /i "C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileReader.dll"
Microsoft (R) .NET Global Assembly Cache Utility. Version 4.0.30319.1
Copyright (c) Microsoft Corporation. All rights reserved.
Assembly successfully added to the cache
Finished deploying additional assemblies to GAC.
ImportBindings:
Copying file from "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" to "C:\BTDF\Walkthrough1\HelloWorld.Deployment\HelloWorld_PortBindings.xml".
BTSTask.exe AddResource -Type:BizTalkBinding -Overwrite -Source:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\HelloWorld_PortBindings.xml" -ApplicationName:"HelloWorld"
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Adding resource (-Type="System.BizTalk:BizTalkBinding" -Luid="HelloWorld_PortBindings.xml") to application "HelloWorld"...
Information: Validating resources (count=1)...
* Validating resource (-Type="System.BizTalk:BizTalkBinding" -Luid="HelloWorld_PortBindings.xml")...
Information: Performing change requests...
Information: Calling BeginTypeChangeRequest for all selected resource types...
PerformingBeginChangeRequest
Updating resource (-Type="System.BizTalk:BizTalkBinding" -Luid="HelloWorld_PortBindings.xml") in store.
Information: * Performing change request on type "System.BizTalk:BizTalkBinding" (count=1)...
Information: Commit the change requests...
* Performing EndTypeChangeRequest for resource type "System.BizTalk:BizTalkBinding".
Command succeeded with 0 errors, 0 warnings.
Deleting file "C:\BTDF\Walkthrough1\HelloWorld.Deployment\HelloWorld_PortBindings.xml".
BTSTask.exe ImportBindings -Source:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" -ApplicationName:"HelloWorld"
Microsoft (R) BizTalk Application Deployment Utility Version 3.10.229.0
Copyright (c) 2013 Microsoft Corporation. All rights reserved.
Information: Importing bindings "C:\BTDF\Walkthrough1\HelloWorld.Deployment\PortBindings.xml" into application "HelloWorld" in BizTalk configuration database (server="BDDBESBWMV01", database="BizTalkMgmtDb")...
Information: Imported application "HelloWorld" bindings.
Command succeeded with 0 errors, 0 warnings.
DeploySSO:
"C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileImport.exe" "HelloWorld" /settingsFile:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml" /userGroupName:"BizTalk Application Users" /adminGroupName:"BizTalk Server Administrators"
Error persisting to SSO:
System.Runtime.InteropServices.COMException (0xC0002A18): The format of the account name is not valid. Domain accounts must include the domain name. Local accounts must not include a domain or computer name.
at Microsoft.BizTalk.SSOClient.Interop.ISSOAdmin.CreateApplication(String applicationName, String description, String contactInfo, String userGroupName, String adminGroupName, Int32 flags, Int32 numFields)
at SSOSettingsFileManager.SSOHelper.CreateApp(String appName, String userGroup, String adminGroup)
at SSOSettingsFileManager.SettingsFileImport.SaveSettingsToSSO(String affiliateAppName, String inSettings, String userGroupName, String adminGroupName)
at SSOSettingsFileManager.SettingsFileImport.Main(String[] args)
C:\Program Files (x86)\MSBuild\DeploymentFrameworkForBizTalk\5.0\BizTalkDeploymentFramework.targets(1701,5): error MSB3073: The command ""C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileImport.exe" "HelloWorld" /settingsFile:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml" /userGroupName:"BizTalk Application Users" /adminGroupName:"BizTalk Server Administrators"" exited with code -1. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
Done Building Project "C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" (Deploy target(s)) -- FAILED.
Build FAILED.
"C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" (Deploy target) (1) ->
(DeploySchemas target) ->
EXEC : warning : If any of the assemblies were previously loaded by a Host Instance, it may be necessary to restart the Host Instance for changes to take effect. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
"C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj" (Deploy target) (1) ->
(DeploySSO target) ->
C:\Program Files (x86)\MSBuild\DeploymentFrameworkForBizTalk\5.0\BizTalkDeploymentFramework.targets(1701,5): error MSB3073: The command ""C:\Program Files (x86)\Deployment Framework for BizTalk 5.5\Framework\DeployTools\SSOSettingsFileImport.exe" "HelloWorld" /settingsFile:"C:\BTDF\Walkthrough1\HelloWorld.Deployment\EnvironmentSettings\Exported_LocalSettings.xml" /userGroupName:"BizTalk Application Users" /adminGroupName:"BizTalk Server Administrators"" exited with code -1. [C:\BTDF\Walkthrough1\HelloWorld.Deployment\Deployment.btdfproj]
1 Warning(s)
1 Error(s)
Time Elapsed 00:00:54.94

Hi Pratibha,
Thank you for posting in MSND forum.
Since
this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
Based
on your issue, since it is related to the Deployment Framework for Biztalk (BTDF), so I suggest you could consult this issue directly to this Deployment Framework for Biztalk (BTDF) website:
https://biztalkdeployment.codeplex.com/discussions , you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Runtime Error in SQL command ..

Hi everybody
I have a report wich terminates with a dump message.
The error is in an SQL command, here the program aborts:
SELECT KUNNR KKBER KLIMK SAUFT SKFOR SSOBL
    INTO TABLE I_KNKK
    FROM KNKK
   WHERE KUNNR IN R_KUNNR
     AND KKBER IN R_KKBER
     AND SBGRP IN S_SBGRP.
DATA: BEGIN OF I_KNKK OCCURS 0,
      KUNNR LIKE KNKK-KUNNR,
      KKBER LIKE KNKK-KKBER,
      KLIMK LIKE KNKK-KLIMK,
      SAUFT LIKE KNKK-SAUFT,
      SKFOR LIKE KNKK-SKFOR,
      SSOBL LIKE KNKK-SSOBL,
      SBGRP LIKE KNKK-SBGRP,
      END OF I_KNKK.
In first moment, i saw the table and SQL filter have the SBGRP field but the SQL fields selection has not this field. But, these same program works good with others selection parameters, in fact this SQL only terminates the program for the bigest company, wich causes the program make many BD access because all previous SQL.
The dump log says:
Runtime errors         DBIF_RSQL_INVALID_RSQL
Exception              CX_SY_OPEN_SQL_DB
Occurred on            23.05.2006 at   17:27:15
Error in the module RSQL accessing the database interface.
An exception occurred. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', neither caught nor passed along using a RAISING clause, in the procedure "(FORM)" . Since the caller of the procedure could not have expected this except to occur, the running program was terminated.
The reason for the exception is:
The SQL statement generated from the SAP Open SQL Statement violates restriction imposed by the database system used in R/3.
Possible errors:
o The maximum size of an SQL statement has been exceeded.
o The statement contains too many input variables.
o The space needed for the input data exceeds the
    available memory.
o ...
How can i be sure the dump is for a lot of BD access for all the SQL commands ?
If these is the error, does somebody knows how can i eliminate this error ?
Please help ..
Regards
Frank

I think the field discrepancy is a red herring here. Not guilty! I agree that using the 'CORRESPONDING FIELDS OF' is safer though.
The error could be happening because your range variables have lots of entries in them which makes the generated sql huge.
To break it up you could use the 'package size' option of the select. This will work it's way through the input in chunks (or packages) of the size you specify.
You could change it to:
SELECT KUNNR KKBER KLIMK SAUFT SKFOR SSOBL
INTO TABLE I_KNKK package size 2000 "or a variable value
FROM KNKK
WHERE KUNNR IN R_KUNNR
AND KKBER IN R_KKBER
AND SBGRP IN S_SBGRP.
process current contents of i_knkk here
endselect.
or ,
SELECT KUNNR KKBER KLIMK SAUFT SKFOR SSOBL
appending TABLE I_KNKK package size 2000
FROM KNKK
WHERE KUNNR IN R_KUNNR
AND KKBER IN R_KKBER
AND SBGRP IN S_SBGRP.
endselect.

There was a problem sending a command to this program. Excel with new templates.

I have recently deployed these UEV templates for Office 2013. In particular, I'm having an issue with Excel 2013. Whenever I let UEV sync settings for this application and I click on a .xlsx file, I get the infamous "There was a problem sending
a command to this program..." error message. This drove me nuts for a week thinking there was something wrong with Excel. I finally figured out it was the Excel UEV settings causing the issue. I've tried deleing the settings package file,
but no luck. I can reproduce the issue pretty easily.

MS has released hotfix for this issue. http://support.microsoft.com/kb/2927019/.
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr

How does System Exec VI identify Standard Error within cmd code?

I am using the System Exec VI to control a USB to serial adaptor program header, I have sucessfully written a .BAT file to call the CMD commands (the .exe I am running uses "-option" commands and the help file reccomends to do so) and it functions perfectly. My only issue is identifing errors. The "Standard Error Out" on the System Exec VI never outputs anything. Yes the wait until completion is TRUE and my standard output functions fine. I am curious as to how the System Exec VI identifies errors from the command prompt and why my errors are not showing up. I am currently using multiple match pattern string functions to identify the possible errors from my standar output for the time being but I would like to simplfy my code a bit and clean it up if at all possible. Not to mention there are most likely several other errors that could occur that I may have not identified. Some examples of stanadrd output errors i can get include include:
{C:\Documents and Settings\owner\Desktop\RACK LINK>C:\DCRABBIT_10.66\Utilities\clRFU.exe "" -s "0":115200 -v -vp+ -usb+
.bin not found
C:\Documents and Settings\owner\Desktop\RACK LINK>pause
Press any key to continue . . . }
or
{C:\Documents and Settings\owner\Desktop\RACK LINK>C:\DCRABBIT_10.66\Utilities\clRFU.exe "C:\Documents and Settings\owner\Desktop\RACK LINK\Calibration_v030.bin" -s "4":115200 -v -vp+ -usb+
Rabbit Field Utility v4.62
Installing Calibration v0.3.0
Sending Coldloader
Error: No Rabbit Processor Detected.
C:\Documents and Settings\owner\Desktop\RACK LINK>pause
Press any key to continue . . . }

I think you should use error handling in batch programming, see this link http://www.robvanderwoude.com/errorlevel.php
CLA 2014
CCVID 2014

Checking whether field-symbol from another program is assigned?

Hi all
I'm attempting to access a FS from another program.
As the FS can be assigned, or unassigned within that program, how do I checked for that in my calling program?
e.g. calling program;
FIELD-SYMBOLS: <fs> TYPE STANDARD TABLE.
DATA: lv_var(40) type c.
lv_var = '(ZTGT_PROG)<read_fs>'.
ASSIGN (lv_var) TO <fs>. " statement might dump...

Hi
Go through this doc and use accordingly
Field Symbols
Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
Field symbols provide greater flexibility when you address data objects:
If you want to process sections of fields, you can specify the offset and length of the field dynamically.
You can assign one field symbol to another, which allows you to address parts of fields.
Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
You can also force a field symbol to take different technical attributes from those of the field assigned to it.
The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
check the below links u will get the answers for your questions
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
Syntax Diagram
FIELD-SYMBOLS
Basic form
FIELD-SYMBOLS <fs>.
Extras:
1. ... TYPE type
2. ... TYPE REF TO cif
3. ... TYPE REF TO DATA
4. ... TYPE LINE OF type
5. ... LIKE s
6. ... LIKE LINE OF s
7. ... TYPE tabkind
8. ... STRUCTURE s DEFAULT wa
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
Effect
This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
You can only use one of the additions.
Example
Output aircraft type from the table SFLIGHT using a field symbol:
FIELD-SYMBOLS <PT> TYPE ANY.
DATA SFLIGHT_WA TYPE SFLIGHT.
ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
WRITE <PT>.
Addition 1
... TYPE type
Addition 2
... TYPE REF TO cif
Addition 3
... TYPE REF TO DATA
Addition 4
... TYPE LINE OF type
Addition 5
... LIKE s
Addition 6
... LIKE LINE OF s
Addition 7
... TYPE tabkind
Effect
You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
Effect
Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
Example
Address components of the flight bookings table SBOOK using a field symbol:
DATA SBOOK_WA LIKE SBOOK.
FIELD-SYMBOLS <SB> STRUCTURE SBOOK
DEFAULT SBOOK_WA.
WRITE: <SB>-BOOKID, <SB>-FLDATE.
Related
ASSIGN, DATA
Additional help
Declaring Field Symbols
Reward points if useful
Regards
Anji

Error within FIELD-command in dailogue-program (Release 4.6B)

Similar Messages

Maybe you are looking for