Error XSQL-017 Running XML Document Demo

Environment: Oracle 8.1.6 (NT 4.0)
XSQL 1.0.4.1
JDK 1.1.8
While running the XML Document Demo, I enter the Author, Title, Stylesheet and XML Document fields, and click the "Validate and Insert" button. Then I get the messages shown below. Any ideas? Thanks.
===== ===== Start Of Messages ===== =====
XSQL-017: Unexpected Error Occurred
java.lang.NoClassDefFoundError: java/sql/Clob
at
oracle.jdbc.driver.OracleStatement.get_clob_value(OracleStatement.java:4447)
at
oracle.jdbc.driver.OracleStatement.getCLOBValue(OracleStatement.java:3025)
at
oracle.jdbc.driver.OracleCallableStatement.getCLOB(OracleCallableStatement.java:439)
at
oracle.xml.sql.dml.OracleXMLSave.createTempCLOBFromString(Compiled
Code)
at
oracle.xml.sql.dml.OracleXMLSave.getLobVal(OracleXMLSave.java:765)
at
oracle.xml.sql.dml.OracleXMLSave.getObjectVal(OracleXMLSave.java:690)
at oracle.xml.sql.dml.OracleXMLSave.getStructVal(Compiled
Code)
at
oracle.xml.sql.dml.OracleXMLSave.setBindValue(OracleXMLSave.java:1206)
at oracle.xml.sql.dml.OracleXMLSave.saveNodeVal(Compiled
Code)
at
oracle.xml.sql.dml.OracleXMLSave.saveNode(OracleXMLSave.java:2146)
at oracle.xml.sql.dml.OracleXMLSave.saveNodes(Compiled
Code)
at
oracle.xml.sql.dml.OracleXMLSave.saveXML(OracleXMLSave.java:1954)
at
oracle.xml.sql.dml.OracleXMLSave.insertXML(OracleXMLSave.java:1060)
at
oracle.xml.xsql.actions.XSQLInsertRequestHandler.handleAction(XSQLInsertRequestHandler.java:126)
at oracle.xml.xsql.XSQLDocHandler.getDocument(Compiled
Code)
at oracle.xml.xsql.XSQLPageProcessor.process(Compiled Code)
at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:60)
at oracle.xml.xsql.XSQLServlet.doPost(XSQLServlet.java:81)
at
javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at
javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at oracle.lite.web.JupServlet.service(JupServlet.java:186)
at oracle.lite.web.MimeServletHandler.handle(Compiled Code)
at oracle.lite.web.JupApplication.service(Compiled Code)
at oracle.lite.web.JupHandler.handle(Compiled Code)
at oracle.lite.web.HTTPServer.process(Compiled Code)
at oracle.lite.web.HTTPServer.handleRequest(Compiled Code)
at oracle.lite.web.JupServer.handle(Compiled Code)
at oracle.lite.web.SocketListener.process(Compiled Code)
at oracle.lite.web.SocketListener$ReqHandler.run(Compiled
Code)
===== ===== End Of Messages ===== =====
null

Using JDK 1.1.8 you must use the JDBC 1.x driver in classes111.zip and the companion version of the XML SQL Utility xsu111.jar.
You'll need to download these from OTN from http://otn.oracle.com/tech/xml and then replace them in your classpath for the classes12.zip and xsu12.jar that you're using.

Similar Messages

Error while constructing multi-XML document (Multi Mapping)

Hi,
We are using Java mapping to split the messages and the same maping has been called in the Enchanced interface determination. The Jave mapping is executing successfully when we run in the Test tab of the interface mapping.
But we are getting error "Error while constructing multi-XML document", when we execute scenario from Runtime work bench or Test Configuration.
Could you advise whether we need to do any extra setting to execute the java mapping in the Enhanced Interface Determination.
Thanks,
Krishnaraju.
Edited by: krishnaraju Mudunuri on Jan 9, 2010 4:13 PM

refer - http://wiki.sdn.sap.com/wiki/display/Java/MultiMappingwithJavaandXSLTmappings
you need to have the messages tag.

Problem opening mail attachments...were opening seamlessly on os 7.0...get an error Filename Office open XML document/presentation File size Does anyone have a solution? Please help.

problem opening mail attachments...were opening seamlessly on os 7.0...get an error
Filename
Office open XML document/presentation
File size
Does anyone have a solution? Please help.

Hi Charlotte,
You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
IE8 doesn't support HTML5.
To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
The above steps will hopefully fix your problem. If not, post here again please.

Unable to display tree view; Error when parsing an XML document (Premature end of file.)

Hi folks,
I am using a cascaded mapping in my OM. I have a graphical mapping followed by the Java mapping. It is a flat file to IDOC mapping. Everything works fine in Dev but when I transport the same objects to QA, the Operation mapping though it doesn't fail in ESR testing tool, gives the following message and there is no output generated for the same payload which is successfully tested in DEV. Please advise on what could be the possible reasons.
Unable to display tree view; Error when parsing an XML document (Premature end of file.)

kalyan,
There seems to be an invalid xml payload which causes this error in ESR not generating the tree view. Please find the similar error screenshot and rectify the payload.
Mutti

Got error message when store XML documents into XML DB repository, via WebD

Hi experts,
I am in I am in Oracle Enterprise Manager 11g 11.2.0.1.0.
SQL*Plus: Release 11.2.0.1.0 Production on Tue Feb 22 11:40:23 2011
I got error message when store XML documents into XML DB repository, via WebDAV.
I have successfully registered 5 related schemas and generated 1 table.
I have inserted 40 .xml files into this auto generated table.
using these data I created relational view successfully.
but since I couldn't store XML documents into XML DB repository, via WebDAV
when I query using below code:
SELECT rv.res.getClobVal()
FROM resource_view rv
WHERE rv.any_path = '/home/DEV/messages/4fe1-865d-da0db9212f34.xml';
I got nothing.
My ftp code is listed below:
ftp> open localhost 2100
Connected to I0025B368E2F9.
220- C0025B368E2F9
Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
220 I0025B368E2F9 FTP Server (Oracle XML DB/Oracle Database) ready.
User (I0025B368E2F9:(none)): fda_xml
331 pass required for FDA_XML
Password:
230 FDA_XML logged in
ftp> cd /home/DEV/message
250 CWD Command successful
ftp> pwd
257 "/home/DEV/message" is current directory.
ftp> ls -la
200 PORT Command successful
150 ASCII Data Connection
drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 .
drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 ..
226 ASCII Transfer Complete
ftp: 115 bytes received in 0.00Seconds 115000.00Kbytes/sec.
250 SET_CHARSET Command Successful
ftp> put C:\ED\SPL\E_Reon_Data\loaded\4fe1-865d-da0db9212f34.xml
200 PORT Command successful
150 ASCII Data Connection
550- Error Response
ORA-00600: internal error code, arguments: [qmxConvUnkType], [], [], [], [], [], [], [], [], [], [], []
550 End Error Response
ftp: 3394 bytes sent in 0.00Seconds 3394000.00Kbytes/sec.
I have tried all suggestion from another thread such as:
alter system set events ='31150 trace name context forever, level 0x4000'
SQL> alter system set shared_servers = 1;
but failed.
is there anyone can help?
Thanks.
Edited by: Cow on Mar 29, 2011 12:58 AM

Hi experts,
I am in I am in Oracle Enterprise Manager 11g 11.2.0.1.0.
SQL*Plus: Release 11.2.0.1.0 Production on Tue Feb 22 11:40:23 2011
I got error message when store XML documents into XML DB repository, via WebDAV.
I have successfully registered 5 related schemas and generated 1 table.
I have inserted 40 .xml files into this auto generated table.
using these data I created relational view successfully.
but since I couldn't store XML documents into XML DB repository, via WebDAV
when I query using below code:
SELECT rv.res.getClobVal()
FROM resource_view rv
WHERE rv.any_path = '/home/DEV/messages/4fe1-865d-da0db9212f34.xml';
I got nothing.
My ftp code is listed below:
ftp> open localhost 2100
Connected to I0025B368E2F9.
220- C0025B368E2F9
Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
220 I0025B368E2F9 FTP Server (Oracle XML DB/Oracle Database) ready.
User (I0025B368E2F9:(none)): fda_xml
331 pass required for FDA_XML
Password:
230 FDA_XML logged in
ftp> cd /home/DEV/message
250 CWD Command successful
ftp> pwd
257 "/home/DEV/message" is current directory.
ftp> ls -la
200 PORT Command successful
150 ASCII Data Connection
drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 .
drw-r--r-- 2 FDA_XML oracle 0 DEC 17 19:19 ..
226 ASCII Transfer Complete
ftp: 115 bytes received in 0.00Seconds 115000.00Kbytes/sec.
250 SET_CHARSET Command Successful
ftp> put C:\ED\SPL\E_Reon_Data\loaded\4fe1-865d-da0db9212f34.xml
200 PORT Command successful
150 ASCII Data Connection
550- Error Response
ORA-00600: internal error code, arguments: [qmxConvUnkType], [], [], [], [], [], [], [], [], [], [], []
550 End Error Response
ftp: 3394 bytes sent in 0.00Seconds 3394000.00Kbytes/sec.
I have tried all suggestion from another thread such as:
alter system set events ='31150 trace name context forever, level 0x4000'
SQL> alter system set shared_servers = 1;
but failed.
is there anyone can help?
Thanks.
Edited by: Cow on Mar 29, 2011 12:58 AM

Error when parsing the XML document

hi all.
i have the next problem.
the sender sistem send to XI an XML. some tags send a '#' caracter.
Sender Service send:
Torre B1 - B#Unimev
when Im traying to test XML inbound, XI show the next error:
Error when parsing the XML document (Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x14(:main:, row:1, col:992))
XML:
<?xml version="1.0" encoding="UTF-8" ?>
- <ZDEBMAS6>
-   <IDOC BEGIN="1">
-      <EDI_DC40 SEGMENT="1">
         <TABNAM>EDI_DC40</TABNAM>
         <MANDT>300</MANDT>
         <DOCNUM>0000000000339708</DOCNUM>
         <DOCREL>640</DOCREL>
         <STATUS>30</STATUS>
         <DIRECT>1</DIRECT>
         <OUTMOD>2</OUTMOD>
       </EDI_DC40>
-      <E1KNA1M SEGMENT="1">
          <MSGFN>009</MSGFN>
          <REGIO>07</REGIO>
          <STCD1>20147972750</STCD1>
          <FITYP>01</FITYP>
          <STCDT>80</STCDT>
          <STCD3>0</STCD3>
-         <Z1KNA1M SEGMENT="1">
             <MSGFN>009</MSGFN>
              <KUNNR>0001000563</KUNNR>
              <ZZSOCRCV>3100</ZZSOCRCV>
              <ZZGBDAT>00000000</ZZGBDAT>
          <b> <ZZAD_STREET_CO>Torre B1 - B Unimev</ZZAD_STREET_CO></b>
              <ZZAD_ROOMNUM_CO>PB</ZZAD_ROOMNUM_CO>
              <ZZAD_FLOOR_CO>E</ZZAD_FLOOR_CO>
              <ZZAD_PSTCD1_CO>M5521AAR</ZZAD_PSTCD1_CO>
              <ZZAD_CITY1_CO>Mendoza</ZZAD_CITY1_CO>
              <ZZAD_REGIO_CO>07</ZZAD_REGIO_CO>
           </Z1KNA1M>
           <Z1ADRCM SEGMENT="1">
              <MSGFN>009</MSGFN>
              <KUNNR>0001000563</KUNNR>
           <b><STREET>Torre B1 - B Unimev</STREET></b>
              <FLOOR>PB</FLOOR>
              <HOUSE_NUM2>E</HOUSE_NUM2>
              <CITY1>Mendoza</CITY1>
              <POST_CODE1>5521</POST_CODE1>
              <COUNTRY>AR</COUNTRY>
              <REGION>07</REGION>
              <LANGU>S</LANGU>
          </Z1ADRCM>
      </E1KNA1M>
    </IDOC>
</ZDEBMAS6>
Message was edited by: Rodrigo Pertierra
Message was edited by: Rodrigo Pertierra

Hi Rodrigo,
Do you use a specific "encoding" like UTF-8 or ISO-8859-1 in your Sender CC.
Try changing the Transfer mode to Binary instead of Text.
Also go through these links:-
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Invalid char in XML from inbound IDoc
Hope this provides a solution.
Regards.
Praveen

Error while generating an XML Document from XML Schema with JAXB

Hi,
I am following this OTN tutorial to generate the XML document from Java classes got from the XSD document.
http://www.oracle.com/technology/pub/notes/technote_jaxb.html
I am able to generate all the Java classes but getting error on compiling the XMLConstructor.java class which is use for generating the XML document :
I am using JDK 1.5 and
Oracle 10g XML Developer's Kit (XDK) Production for Java. xdk_nt_10_1_0_2_0_production
(though these are warnings I am not able to run it.)
Error
C:\Prototype\classes\jaxbderived\catalog>javac -Xlint XMLConstructor.java
warning: [path] bad path element "%CLASSPATH%": no such file or directory
XMLConstructor.java:42: warning: [unchecked] unchecked call to add(E) as a member of the raw type java.util.List
journalList.add(journal);
^
XMLConstructor.java:46: warning: [unchecked] unchecked call to add(E) as a membe
r of the raw type java.util.List
articleList.add(article);
Thanks
Sanjeev ([email protected])

Use JDK 1.4.

AQ Adapter error: Could not create XML document carrying AQ Headers

I'm having problem with the AQ adapter (ADT) sample that comes with the SOA 10g install.
I am running 10.1.3.4 on XP, using Oracle XE.
I can use the sample sql script to enque and deque. However, when I deploy the sample ADT (BPEL project), I see errors in the opmn log. The BPEL instance is not even created.
I see another post with similar question, Re: Debugging BPEL when using Oracle AQ but no answer.
Any help is greatly appreciated. Thx!
----------------- err log --------------
<2009-07-15 00:04:31,656> <INFO> <collaxa> <ServerManager::loadProcesses> Done loading processes for all domains
<2009-07-15 00:04:32,031> <INFO> <default.collaxa.cube.activation> <AQ Adapter::Inbound> MessageReader_ctor: Initialized MessageReader for queue CUSTOMER_IN_QUEUE, consumer = null)
<2009-07-15 00:12:15,984> <ERROR> <default.collaxa.cube.activation> <AQ Adapter::Inbound> MessageReader_ReadMessage: Could not create XML document carrying AQ Headers: [Ljava.lang.StackTraceElement;@e7af3a
<2009-07-15 00:12:15,984> <ERROR> <default.collaxa.cube.activation> <AQ Adapter::Inbound>
java.lang.Exception: java.lang.NullPointerException
     at oracle.tip.adapter.aq.database.MessageReader.readMessage(MessageReader.java:750)
     at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.run(AQActivationSpecDequeuer.java:261)
     at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
     at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:280)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
     at oracle.oc4j.sql.proxy.StatementBCELProxy.oc4j_releaseToCache(StatementBCELProxy.java:67)
     at oracle.oc4j.sql.proxy.StatementBCELProxy.oc4j_releaseTarget(StatementBCELProxy.java:79)
     at oracle.oc4j.sql.proxy.SQLBCELProxy.oc4j_close(SQLBCELProxy.java:95)
     at oracle.oc4j.sql.proxy.StatementBCELProxy.close(StatementBCELProxy.java:92)
     at oracle.AQ.AQOracleQueue.destroyStmt(AQOracleQueue.java:3099)
     at oracle.AQ.AQOracleQueue.dequeue(AQOracleQueue.java:1793)
     at oracle.AQ.AQOracleQueue.dequeue(AQOracleQueue.java:1307)
     at oracle.tip.adapter.aq.database.MessageReader.readMessage(MessageReader.java:485)
     ... 4 more
<2009-07-15 00:12:16,203> <FATAL> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Uncaught exception oracle.as.j2ee.transaction.tpc.ProtocolErrorWithNotification in JCA-work-instance:AQ Adapter-0 - cause: Branch [oracle.oc4j.sql.xa.EmulatedXAResource@14d9865, Xid( Global Id 34.5f.1e.a8.ff.ff.ff.ff.cd.b9.38.7d.22.01.00.00.7a.02.00.00.00.00.00.00, Format Id 1330790740, Branch Id 7c.e5.55.76.00.00.00.00.00.00.00.00.00.00.00.01), oracle.oc4j.sql.xa.EmulatedXAResource@14d9865, state={PREPARED}, exception error code=] in transaction Global Transaction Xid( Global Id 34.5f.1e.a8.ff.ff.ff.ff.cd.b9.38.7d.22.01.00.00.7a.02.00.00.00.00.00.00, Format Id 1330790740), type=orabpel, state=COMMITTING, time in completion or recovering=0)
....

thanks for the reply. I did look into that post, and couldn't found where to set that option either.
However, my PC was rebooted a few times today (I didn't change anything with BPEL), and I just re-ran the test now, that problem disappeared! It is working fine now.

Error while loading an XML document using a structured application

Hi,
I try to load an XML document using a structured application defined in the default structapps.fm
My code is shown down, extracted from the FDK API code sample.
Problem, I always have the same message :
"Cannot find the file named e:\xml\AdobeFrameMaker10\file. Make sure that the file exists. "
Where "e:\xml\AdobeFrameMaker10\" is my install directory.
So I assume that frame try to find the structapps.fm file but does not find it.
What else can it be ?
Does anyone knowns how to achieve this simple task using extendScript ?
Thanks for any comments, Pierre
function openXMLFile(myLastFile) {
    var filename = myLastFile.openDlg("Choose XML file ...", "*.xml", false);
    if (filename != null) {
        /* Get default open properties. Return if it can’t be allocated. */
        var params = GetOpenDefaultParams();
        /* Set properties to open an XML document*/
        /*Specify XML as file type to open*/
        var i = GetPropIndex(params, Constants.FS_OpenAsType)
        params[i].propVal.ival = Constants.FV_TYPE_XML;
        /* Specify the XML application to be used when opening the document.*/
        i = GetPropIndex(params, Constants.FS_StructuredOpenApplication)
        params[i].propVal.sval = "myApp";
        i = GetPropIndex(params, Constants.FS_FileIsOldVersion)
        params[i].propVal.ival = Constants.FV_DoOK
        i = GetPropIndex(params, Constants.FS_FontNotFoundInDoc)
        params[i].propVal.ival = Constants.FV_DoOK
        i = GetPropIndex(params, Constants.FS_FileIsInUse)
        params[i].propVal.ival = Constants.FV_DoCancel
        i = GetPropIndex(params, Constants.FS_AlertUserAboutFailure)
        params[i].propVal.ival = Constants.FV_DoCancel
        /*The structapps.fm file containing the specified application must have
        already been read. The default structapps.fm file is read when FrameMaker is
        opened so this shouldn't be a problem if the application to be used is
        listed in the structapps.fm file.*/
        var retParm = new PropVals()
        var fileObj = Open(filename, params, retParm);
        return fileObj
    } else {
        return null;

Pierre,
Depending on the object "myLastFile", the method openDlg might not even exist (if the myLastFile object is not a File object, for instance). And I do not see any need for the myLastFile anyhow, as you are presenting a dialog to select a file to open. I recommend using the global ChooseFile( ) method instead. This will give you a filename as string in full path notation, or null when no file was selected in the dialog. I am not sure what your ExtendScript documentation states about the return value for ChooseFile, but if that differs from what I am telling you here, the documentation is wrong. So, if you replace the first lines of your code with the following it should work:
function openXMLFile ( ) {
    var filename = ChooseFile ( "Choose XML file ...", "", "*.xml", Constants.FV_ChooseSelect );
While writing this, I see that Russ has already given you the same advice. Use the symbolic constant value I indicated to use the ChooseFile dialog to select a single file (it can also be used to select a directory or open a file - but you want to control the opening process yourself). Note that this method allows you to set a start directory for the dialog (second parameter). The ESTK autocompletion also gives you a fifth parameter "helplink" which is undocumented and can safely be ignored.
Good luck
Jang

Error: No valid XML document received*_

Hi All,
We are connecting our CCMS system to NetWeaver J2EE engine on which E-Sourcing is running.
For this we registered java component and hosts in cen.
But we are getting error as : No valid XML document received
Please can anyone tell me how to overcome this error.
Thank you .
Regards
Mahesh

Hi,
Please re-read the answer from Marc carefully. He was in the exact same situation as yours:
- Monitored system: NW CE 7.1
- CEN: NW 7.01 (same as NW 7.0 EhP1)
The link you posted is for CEN with NW 7.3 and monitored systems from NW 7.02 (and up). Read the paragraph below the Caution sign:
If you want to centrally monitor any system with a central monitoring system with release SAP NetWeaver 7.0, this procedure is not applicable. In this case, follow the procedure described in the newest Monitoring Setup Guide for SAP NetWeaver 7.0 instead. You can obtain the Monitoring Setup Guide at the Internet address service.sap.com/operationsnw70 in the Monitoring area.
You should look for (and follow) the right Monitoring Setup Guide as mentioned.
Regards,
Dao
Edited by: Dao Ha on Sep 19, 2011 10:38 AM

No valid XML document received

Hi All,
We are connecting our CCMS system to NetWeaver J2EE engine on which E-Sourcing is running.
For this we registered java component and hosts in cen.
But we are getting error as : No valid XML document received
Please can anyone tell me how to overcome this error.
Thank you .
Regards
Mahesh

Hi,
Please re-read the answer from Marc carefully. He was in the exact same situation as yours:
- Monitored system: NW CE 7.1
- CEN: NW 7.01 (same as NW 7.0 EhP1)
The link you posted is for CEN with NW 7.3 and monitored systems from NW 7.02 (and up). Read the paragraph below the Caution sign:
If you want to centrally monitor any system with a central monitoring system with release SAP NetWeaver 7.0, this procedure is not applicable. In this case, follow the procedure described in the newest Monitoring Setup Guide for SAP NetWeaver 7.0 instead. You can obtain the Monitoring Setup Guide at the Internet address service.sap.com/operationsnw70 in the Monitoring area.
You should look for (and follow) the right Monitoring Setup Guide as mentioned.
Regards,
Dao
Edited by: Dao Ha on Sep 19, 2011 10:38 AM

TP Agreement Not Found -- OAGIS XML document over AS2

Hi,
I am getting TP Agreement not found error while receiving OAGIS XML document over AS2. Below is error message.
Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND
I am not sure why it says null-INBOUND. It appears like it is not able to identify Document Version. DOCTYPE_REVISION=7.2.1 is being passed in the AS2 transport headers but still it does not recognize the version.
I am not sure what is missing. Please give some ideas hints.
Below is the Business Message:----
Id     AC12149513F1F78141400000E7DEDE00
Message Id     AC12149513F1F78136200000E7DED800
Refer To Message     Refer To Message
Sender Type     AS2 Identifier
Sender Value     SOALocal
Receiver Type     AS2 Identifier
Receiver Value     PowellIndustries
Sender     SOALocal
Receiver     Powell
Agreement Id
Agreement
Document Type     PROCESS_INVOICE_002
Document Protocol     OAG
Document Version     7.2.1
Message Type     REQ
Direction     INBOUND
State     MSG_ERROR
Acknowledgement Mode     NONE
Response Mode     ASYNC
Send Time Stamp     06/07/2013 11:28:49 AM
Receive Time Stamp     06/07/2013 11:28:50 AM
Document Retry Interval(Channel)     0
Document Remaining Retry(Channel)     0
Document Retry Interval(Agreement)
Document Remaining Retry(Agreement)
Native Message Size     10788
Translated Message Size
Business Action Name
Business Transaction Name
Xpath Name1
Xpath Value1
Xpath Expression1
Xpath Name2
Xpath Value2
Xpath Expression2
Xpath Name3
Xpath Value3
Xpath Expression3
Correlation From XPath Name
Correlation From XPath Value
Correlation From XPath Expression
Correlation To XPath Name
Correlation To XPath Value
Correlation To XPath Expression
Wire Message     Wire Message
Application Message     Application Message
Payload Storage     Payload Storage
Attachment     Attachment
Label
Collaboration Id     AC12149513F1F7813BF00000E7DEDB00
Collabration Name
Collabration Version
Business Action Name
Exchange Protocol Name     AS2
Exchange Protocol Version     1.1
Interchange Control Number
Group Control Number
Transaction Set Control Number
Error Code     B2B-50547
Error Description     Machine Info: (pwl.pri) Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
Error Level     ERROR_LEVEL_COLLABORATION
Error Severity     ERROR
Error Text     Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
Below is the Wire Message:----
Id     AC12149513F1F78115400000E7DED600
Message Id     AC12149513F1F78115400000E7DED600
Business Message     AC12149513F1F78141400000E7DEDE00
Packed Message     Packed Message
Payload     Payload
Protocol Message Id     <38383939373331343630313931303737@SOALocal>
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding     ChannelName=SOALocal dcID=CHANNEL_nlzbB-7511847722850817684 AS2-To=PowellIndustries DOCTYPE_NAME=PROCESS_INVOICE_002 TE=trailers, deflate, gzip, compress DOCTYPE_REVISION=7.2.1 Date=Fri, 07 Jun 2013 16:28:49 GMT AS2-Version=1.1 Accept-Encoding=gzip, x-gzip, compress, x-compress AS2-From=SOALocal url=http://pwl.pri/b2b/transportServlet Content-Transfer-Encoding=binary Message-ID=<38383939373331343630313931303737@SOALocal> Content-type=application/pkcs7-mime; smime-type="enveloped-data" MSG_RECEIVED_TIME=Fri Jun 07 11:28:49 CDT 2013 ECID-Context=1.71b9d2a41e5aaef0:-10db6371:13f1ee6cb74:-8000-000000000000276d;khvE MIME-version=1.0 tpName=PowellIndustries User-Agent=AS2 Server Oracle HTTPClient Version 10h Content-Length=13663 Host=pwl.pri:8001 Connection=close, TE useProxy=false From=SOALocal additionalHeaders=DOCTYPE_NAME=PROCESS_INVOICE_002#DOCTYPE_REVISION=7.2.1
Message Digest     Message Digest
Digest Algorithm     md5
Transport Protocol     HTTP
Transport Protocol Version     1.1
Url     http://pwl.pri:8001/b2b/transportServlet
security
Transport Headers     ChannelName=SOALocal dcID=CHANNEL_nlzbB-7511847722850817684 AS2-To=PowellIndustries DOCTYPE_NAME=PROCESS_INVOICE_002 TE=trailers, deflate, gzip, compress DOCTYPE_REVISION=7.2.1 Date=Fri, 07 Jun 2013 16:28:49 GMT AS2-Version=1.1 Accept-Encoding=gzip, x-gzip, compress, x-compress AS2-From=SOALocal url=http://pwl.pri:8001/b2b/transportServlet Content-Transfer-Encoding=binary Message-ID=<38383939373331343630313931303737@SOALocal> Content-type=application/pkcs7-mime; smime-type="enveloped-data" MSG_RECEIVED_TIME=Fri Jun 07 11:28:49 CDT 2013 ECID-Context=1.71b9d2a41e5aaef0:-10db6371:13f1ee6cb74:-8000-000000000000276d;khvE MIME-version=1.0 tpName=PowellIndustries User-Agent=AS2 Server Oracle HTTPClient Version 10h Content-Length=13663 Host=pwl.pri:8001 Connection=close, TE useProxy=false From=SOALocal additionalHeaders=DOCTYPE_NAME=PROCESS_INVOICE_002#DOCTYPE_REVISION=7.2.1
certificates     certificates
State     ERROR
Reattempt Count
Error Code     B2B-50547
Error Description     Machine Info: (pwl.pri) Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
Error Text     Agreement not found for trading partners: FromTP SOALocal, ToTP Powell with document type PROCESS_INVOICE_002-null-INBOUND.
exchangeRetryInterval
exchangeRemainingRetry
Message Size     10788
Thanks
Ismail M.

Hi Anuj,
Here is the payload from the wire message. We are using 11.1.1.6.0
<?xml version = '1.0' encoding = 'UTF-8'?>
<PROCESS_INVOICE_002 xmlns="http://www.openapplications.org/171_process_invoice_002">
<CNTROLAREA xmlns="">
    <BSR>
      <VERB value="PROCESS">PROCESS</VERB>
      <NOUN value="INVOICE">INVOICE</NOUN>
      <REVISION value="002">002</REVISION>
    </BSR>
    <SENDER>
      <LOGICALID>POWELLIND</LOGICALID>
      <COMPONENT>B2B</COMPONENT>
      <TASK/>
      <REFERENCEID/>
      <CONFIRMATION>0</CONFIRMATION>
      <LANGUAGE>ENG</LANGUAGE>
      <CODEPAGE/>
      <AUTHID>oracle B2B</AUTHID>
    </SENDER>
    <DATETIME qualifier="CREATION">
      <YEAR/>
      <MONTH/>
      <DAY/>
      <HOUR/>
      <MINUTE/>
      <SECOND/>
      <SUBSECOND/>
      <TIMEZONE/>
    </DATETIME>
</CNTROLAREA>
<DATAAREA xmlns="">
    <PROCESS_INVOICE>
      <INVHEADER>
        <AMOUNT qualifier="DOCUMENT" type="T" index="1">
          <VALUE>5413</VALUE>
          <NUMOFDEC>2</NUMOFDEC>
          <SIGN>+</SIGN>
          <CURRENCY>USD</CURRENCY>
          <DRCR>D</DRCR>
        </AMOUNT>
        <DATETIME qualifier="DOCUMENT" index="1">
          <YEAR>2013</YEAR>
          <MONTH>03</MONTH>
          <DAY>15</DAY>
          <HOUR>00</HOUR>
          <MINUTE>00</MINUTE>
          <SECOND>00</SECOND>
          <SUBSECOND>0000</SUBSECOND>
          <TIMEZONE>-0500</TIMEZONE>
        </DATETIME>
        <DOCUMENTID>1000182</DOCUMENTID>
        <DESCRIPTN/>
        <DOCTYPE/>
        <PAYMETHOD/>
        <REASONCODE/>
        <USERAREA/>
        <PARTNER>
          <NAME index="1">Powell US Operating Unit</NAME>
          <ONETIME/>
          <PARTNRID/>
          <PARTNRTYPE>Supplier</PARTNRTYPE>
          <SYNCIND/>
          <ACTIVE/>
          <CURRENCY/>
          <DESCRIPTN/>
          <DUNSNUMBER/>
          <GLENTITYS/>
          <NAME index="1">Powell US Operating Unit</NAME>
          <PARENTID/>
          <PARTNRIDX/>
          <PARTNRRATG/>
          <PARTNRROLE/>
          <PAYMETHOD/>
          <TAXEXEMPT/>
          <TAXID/>
          <TERMID/>
          <USERAREA/>
          <CONTACT>
            <NAME index="1">No Sales Credit</NAME>
            <CONTCTTYPE/>
            <DESCRIPTN/>
            <EMAIL/>
            <FAX index="1"/>
            <TELEPHONE index="1"/>
            <USERAREA/>
          </CONTACT>
        </PARTNER>
        <PARTNER>
          <NAME index="1">PO Box 843823, Dallas, Dallas, TX, 75284-3823, United States</NAME>
          <ONETIME/>
          <PARTNRID/>
          <PARTNRTYPE>RemitTo</PARTNRTYPE>
          <SYNCIND/>
          <ACTIVE/>
          <CURRENCY/>
          <DESCRIPTN/>
          <DUNSNUMBER/>
          <GLENTITYS/>
          <NAME index="1">PO Box 843823, Dallas, Dallas, TX, 75284-3823, United States</NAME>
          <PARENTID/>
          <PARTNRIDX/>
          <PARTNRRATG/>
          <PARTNRROLE/>
          <PAYMETHOD/>
          <TAXEXEMPT/>
          <TAXID/>
          <TERMID/>
          <USERAREA/>
          <ADDRESS>
            <ADDRLINE index="1">PO Box 843823</ADDRLINE>
            <ADDRTYPE/>
            <CITY>Dallas</CITY>
            <COUNTRY>United States</COUNTRY>
            <COUNTY>Dallas</COUNTY>
            <DESCRIPTN/>
            <FAX index="1"/>
            <POSTALCODE/>
            <REGION/>
            <STATEPROVN>TX</STATEPROVN>
            <TAXJRSDCTN/>
            <TELEPHONE index="1"/>
            <URL/>
            <USERAREA/>
          </ADDRESS>
          <CONTACT>
            <NAME index="1"/>
            <CONTCTTYPE/>
            <DESCRIPTN/>
            <EMAIL/>
            <FAX index="1"/>
            <TELEPHONE index="1"/>
            <USERAREA/>
          </CONTACT>
        </PARTNER>
        <PARTNER>
          <NAME index="1"/>
          <ONETIME/>
          <PARTNRID/>
          <PARTNRTYPE>Carrier</PARTNRTYPE>
          <SYNCIND/>
          <ACTIVE/>
          <CURRENCY/>
          <DESCRIPTN/>
          <DUNSNUMBER/>
          <GLENTITYS/>
          <NAME index="1"/>
          <PARENTID/>
          <PARTNRIDX/>
          <PARTNRRATG/>
          <PARTNRROLE/>
          <PAYMETHOD/>
          <TAXEXEMPT/>
          <TAXID/>
          <TERMID/>
          <USERAREA/>
          <ADDRESS>
            <ADDRLINE index="1"/>
            <ADDRTYPE/>
            <CITY/>
            <COUNTRY/>
            <COUNTY/>
            <DESCRIPTN/>
            <FAX index="1"/>
            <POSTALCODE/>
            <REGION/>
            <STATEPROVN/>
            <TAXJRSDCTN/>
            <TELEPHONE index="1"/>
            <URL/>
            <USERAREA/>
          </ADDRESS>
          <CONTACT>
            <NAME index="1"/>
            <CONTCTTYPE/>
            <DESCRIPTN/>
            <EMAIL/>
            <FAX index="1"/>
            <TELEPHONE index="1"/>
            <USERAREA/>
          </CONTACT>
        </PARTNER>
        <DOCUMNTREF>
          <DOCTYPE>INV</DOCTYPE>
          <DOCUMENTID>10005:21009</DOCUMENTID>
          <PARTNRID/>
          <PARTNRTYPE>Supplier</PARTNRTYPE>
          <DESCRIPTN/>
          <DOCUMENTRV/>
          <LINENUM/>
          <NOTES index="1"/>
          <SCHLINENUM/>
          <SUBLINENUM/>
          <USERAREA/>
        </DOCUMNTREF>
        <INVTAX>
          <AMOUNT qualifier="TAX" type="T" index="1">
            <VALUE>413</VALUE>
            <NUMOFDEC>2</NUMOFDEC>
            <SIGN>+</SIGN>
            <CURRENCY>USD</CURRENCY>
            <DRCR>D</DRCR>
          </AMOUNT>
          <AMOUNT qualifier="TAXBASE" type="T" index="1">
            <VALUE>5413</VALUE>
            <NUMOFDEC>2</NUMOFDEC>
            <SIGN>+</SIGN>
            <CURRENCY>USD</CURRENCY>
            <DRCR>D</DRCR>
          </AMOUNT>
          <QUANTITY qualifier="PERCENT">
            <VALUE/>
            <NUMOFDEC/>
            <SIGN/>
            <UOM/>
          </QUANTITY>
          <DESCRIPTN/>
          <LINENUM/>
          <TAXCODE/>
          <TAXJRSDCTN/>
          <USERAREA/>
        </INVTAX>
        <PYMTTERM>
          <AMOUNT qualifier="DISCNT" type="T" index="1">
            <VALUE/>
            <NUMOFDEC/>
            <SIGN/>
            <CURRENCY/>
            <DRCR/>
          </AMOUNT>
          <DATETIME qualifier="DISCNT" index="1">
            <YEAR/>
            <MONTH/>
            <DAY/>
            <HOUR/>
            <MINUTE/>
            <SECOND/>
            <SUBSECOND/>
            <TIMEZONE/>
          </DATETIME>
          <DATETIME qualifier="DUE" index="1">
            <YEAR>2013</YEAR>
            <MONTH>04</MONTH>
            <DAY>14</DAY>
            <HOUR>00</HOUR>
            <MINUTE>00</MINUTE>
            <SECOND>00</SECOND>
            <SUBSECOND>0000</SUBSECOND>
            <TIMEZONE>-0500</TIMEZONE>
          </DATETIME>
          <DATETIME qualifier="PYMTTERM" index="1">
            <YEAR>1952</YEAR>
            <MONTH>01</MONTH>
            <DAY>01</DAY>
            <HOUR>00</HOUR>
            <MINUTE>00</MINUTE>
            <SECOND>00</SECOND>
            <SUBSECOND>0000</SUBSECOND>
            <TIMEZONE>-0600</TIMEZONE>
          </DATETIME>
          <DESCRIPTN>Net Due in 30 Days</DESCRIPTN>
          <TERMID>30 NET</TERMID>
          <USERAREA>
            <AMOUNT qualifier="TOTAL" type="T" index="1">
              <VALUE>5413</VALUE>
              <NUMOFDEC>2</NUMOFDEC>
              <SIGN>+</SIGN>
              <CURRENCY/>
              <DRCR>D</DRCR>
            </AMOUNT>
          </USERAREA>
        </PYMTTERM>
      </INVHEADER>
      <INVLINE>
        <AMOUNT qualifier="EXTENDED" type="T" index="1">
          <VALUE>50</VALUE>
          <NUMOFDEC/>
          <SIGN>+</SIGN>
          <CURRENCY/>
          <DRCR>D</DRCR>
        </AMOUNT>
        <OPERAMT qualifier="UNIT" type="T">
          <VALUE>5</VALUE>
          <NUMOFDEC/>
          <SIGN>+</SIGN>
          <CURRENCY/>
          <UOMVALUE>1</UOMVALUE>
          <UOMNUMDEC>0</UOMNUMDEC>
          <UOM/>
        </OPERAMT>
        <QUANTITY qualifier="ITEM">
          <VALUE>10</VALUE>
          <NUMOFDEC/>
          <SIGN>+</SIGN>
          <UOM/>
        </QUANTITY>
        <LINENUM>1</LINENUM>
        <DESCRIPTN>11GA SHEET STEEL HOT ROLLED-PICKLED-OILED COMMERCIAL QUALITY.</DESCRIPTN>
        <ITEM>11GA SHEET STEEL HOT ROLLED-PICKLED-OILED COMMERCIAL QUALITY.</ITEM>
        <ITEMTYPE/>
        <ITEMX>11HRPO</ITEMX>
        <OPENITEM/>
        <PROJACTVTY/>
        <UNIT>LB</UNIT>
        <UPC/>
        <USERAREA/>
        <DOCUMNTREF>
          <DOCTYPE>LINE</DOCTYPE>
          <DOCUMENTID>10005:21009:19019</DOCUMENTID>
          <PARTNRID/>
          <PARTNRTYPE>Supplier</PARTNRTYPE>
          <DESCRIPTN/>
          <USERAREA/>
        </DOCUMNTREF>
        <DOCUMNTREF>
          <DOCTYPE>SalesOrder</DOCTYPE>
          <DOCUMENTID>600813</DOCUMENTID>
          <PARTNRID/>
          <PARTNRTYPE/>
          <DESCRIPTN/>
          <USERAREA/>
        </DOCUMNTREF>
        <DOCUMNTREF>
          <DOCTYPE>PurchaseOrder</DOCTYPE>
          <DOCUMENTID>TEST123</DOCUMENTID>
          <PARTNRID>N/A</PARTNRID>
          <PARTNRTYPE>Customer</PARTNRTYPE>
          <DESCRIPTN/>
          <DOCUMENTRV/>
          <LINENUM/>
          <SCHLINENUM/>
        </DOCUMNTREF>
      </INVLINE>
    </PROCESS_INVOICE>
</DATAAREA>
</PROCESS_INVOICE_002>

Failed to open XML document. Failed to retrieve Public ID

I have a client posting to Weblogic 6.1 server with the help of Apache
SOAP 2.2. The posting works fine if the contents of the SOAP message
is small. But when the contents of SOAP reached more than 11KB, the
following error occurs:
Error: Failed to open XML document. Failed to retrieve PUBLIC id or
SYSTEM id from the document. Decrease the number of char between the
beginning of the document and its root element.
The SOAP document looks like:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<mn:sMethodName xmlns:mn="sMethodURI">
<batch appid="1">
<employee>
<name>...</name>
<address>...</address>
</employee>
<employee>
<name>...</name>
<address>...</address>
</employee>
</batch>
</mn:sMethodName>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The Max Post Size in Weblogic is set to (-1).
The program is able to handle less than 50 items of
<employee>.....</employee>. The error occurs when more than 50 items
are used. The problem is that our application should be able to handle
more than 1000 items of <employee>....</employee>.
My questions are:
1. How should I configure weblogic to solve the problem?
2. How should I configure the deployment of Apache SOAP to solve the
problem?
Pls advise. Thanks.

One can deduce from the error message that the parser is looking for the
<?XML...?> portion of the document because that is where the SYSTEM and
PUBLIC ids are found in the document.
Peace,
Cameron Purdy
Tangosol Inc.
Tangosol Coherence: Clustered Coherent Cache for J2EE
Information at http://www.tangosol.com/
"Grace" <[email protected]> wrote in message
news:[email protected]...
>
Sorry, but I didn't get what you mean. I thought that was handled by theApache
SOAP API already? And if it couldn't see the XML document header, then whydoes
this only happens when the document size is large? It doesn't haveproblems whenever
the document size is small.
"Cameron Purdy" <[email protected]> wrote:
It's looking for the XML document header "<?XML" ....
Peace,
Cameron Purdy
Tangosol Inc.
Tangosol Coherence: Clustered Coherent Cache for J2EE
Information at http://www.tangosol.com/
"Grace" <[email protected]> wrote in message
news:[email protected]...
I have a client posting to Weblogic 6.1 server with the help of Apache
SOAP 2.2. The posting works fine if the contents of the SOAP message
is small. But when the contents of SOAP reached more than 11KB, the
following error occurs:
Error: Failed to open XML document. Failed to retrieve PUBLIC id or
SYSTEM id from the document. Decrease the number of char between the
beginning of the document and its root element.
The SOAP document looks like:
<SOAP-ENV:Envelope
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Body>
<mn:sMethodName xmlns:mn="sMethodURI">
<batch appid="1">
<employee>
<name>...</name>
<address>...</address>
</employee>
<employee>
<name>...</name>
<address>...</address>
</employee>
</batch>
</mn:sMethodName>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The Max Post Size in Weblogic is set to (-1).
The program is able to handle less than 50 items of
<employee>.....</employee>. The error occurs when more than 50 items
are used. The problem is that our application should be able to handle
more than 1000 items of <employee>....</employee>.
My questions are:
1. How should I configure weblogic to solve the problem?
2. How should I configure the deployment of Apache SOAP to solve the
problem?
Pls advise. Thanks.

Invalid XML document can be inserted

Hi,
I'm using Oracle 10g Enterprise Edition Release 10.1.0.4.0. I have a schema based (XSD) database where I'm trying to insert invalid document and it works :(
Here is an extract of the schema :
     <xsd:element name="quantity">
          <xsd:simpleType>
               <xsd:restriction base="xsd:positiveInteger">
                    <xsd:maxExclusive value="100"/>
               </xsd:restriction>
          </xsd:simpleType>
     </xsd:element>
If I put a XML document with invalid data like "<quantity>230</quantity>" I have not error message from Oracle. The XML is inserted !
Is this error corresponding to "Bug 4329431 DBMS_XMLPARSER ignores errors while parsing invalid XML document" or is it another bug ?
Thanks

Try doing a search on schemaValidate() in this forum. The gist of it is that you need to invoke the schemaValidate() method. By default we do a lax validation that checks things like mandatory elements are present etc.To perform a full schema validation use a trigger or procedure to invoke this method on the XMLType
Eg
create or replace trigger validate_xml before insert on my_xml_table
for each row
begin
   :new.object_value.schemaValidate();
end;
/

ORA-00600: inserting xml document

I am getting an this error when inserting an xml document into Oracle.
The schema below and sample xml document reproduce the problem.
If I move the element named "theID" from the type "BaseObjectType"
to "NextObjectType" and remove the extension declaration in this type
all works ok. complete error is:
ORA-00600: internal error code, arguments: [qmxConvUnkType], [], [], [], [],
Schema:
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema
targetNamespace="http://www.x.com/test"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:tes="http://www.x.com/test">
<xs:complexType name="BaseObjectType" abstract="true">
<xs:sequence>
<xs:element name="theID" type="xs:string">
</xs:element>
</xs:sequence>
</xs:complexType>
<xs:complexType name="NextObjectType" abstract="true">
<xs:complexContent>
<xs:extension base="tes:BaseObjectType">
<xs:sequence>
<xs:element name="title" type="xs:string">
</xs:element>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:complexType name="RBaseType" abstract="true">
<xs:complexContent>
<xs:restriction base="tes:NextObjectType">
<xs:sequence>
<xs:element name="theID" type="xs:string"/>
<xs:element name="title" type="xs:string"/>
</xs:sequence>
</xs:restriction>
</xs:complexContent>
</xs:complexType>
<xs:complexType name="RType">
<xs:complexContent>
<xs:extension base="tes:RBaseType">
<xs:sequence>
<xs:element name="theName" type="xs:string">
</xs:element>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:element name="RObject" type="tes:RType"/>
</xs:schema>
Sample xml document:
<?xml version="1.0" encoding="UTF-8"?>
<RObject xmlns="http://www.x.com/test"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://localhost:8080:/test.xsd">
<theID xmlns="">123</theID>
<title xmlns="">title</title>
<theName xmlns="">name</theName>
</RObject>
Register Schema call:
BEGIN
DBMS_XMLSCHEMA.registerSchema(
SCHEMAURL => 'http://localhost:8080/test.xsd',
SCHEMADOC => bfilename('TMP3','test.xsd'),
LOCAL => TRUE,
GENTYPES => TRUE,
GENTABLES => TRUE,
CSID => nls_charset_id('AL32UTF8'));
END;
Insert xml document call:
insert into "RObject566_TAB" values
(XMLType(bfilename('TMP3','test.xml'),nls_charset_id('AL32UTF8')));
Changing NextObjectType to this gets insert to work:
<xs:complexType name="NextObjectType" abstract="true">
<xs:sequence>
<xs:element name="theID" type="xs:string"/>
<xs:element name="title" type="xs:string"/>
</xs:sequence>
</xs:complexType>
Anyone else seen this?
jcl.

BTW: This is with Oracle 10.2.0

Error XSQL-017 Running XML Document Demo

Similar Messages

Maybe you are looking for