Errore ORA-04098 creating Trigger.
hi,
I have some problem creating a simple trigger for auto increment of an "Id_column".
I create a sequence: create sequence "sequence_name" minvalue 1 maxvalue 999 increment by 1
then create trigger: create trigger "trigger_registry"
before insert on "registry"
for each row
when (new.ID_registryA is null)
begin
select "Sequence_name".nextval into: new.ID_registry
FROM DUAL;
END;
and finally I try to insert something into registry table but I got this error: ORA-04098: il trigger 'SYSTEM.TRIGGER_NAME' is invalid and failed re-validation.
Has anybody got any idea about this error?
user3745218 wrote:
ok, so i've corrected all but the error is still the same: ORA-04098: il trigger 'SYSTEM.TRIGGER_NAME' is invalid and failed re-validation.
Unless you post SQL*PLus snippet like this, we can't help you:
SQL> create or replace
2 trigger emp1_bir
3 before insert
4 on emp1
5 for each row
6 when (new.sal < 0)
7 begin
8 select sss.nextval into :new.empno from dual;
9 end;
10 /
Warning: Trigger created with compilation errors.
SQL> show error trigger emp1_bir
Errors for TRIGGER EMP1_BIR:
LINE/COL ERROR
2/1 PL/SQL: SQL Statement ignored
2/8 PL/SQL: ORA-02289: sequence does not exist
SQL> SY.
Similar Messages
-
Please could somebody tell me what to do. I use both Procedure builder and Sql plus (Oracle 8i and Forms 6i). I ran a script catproc.sql (That is bundled in the admin subdirectory) last night. When I try drop a stored procedure or function - I get the error ORA-04098: trigger 'SYS.JIS$ROLE_TRIGGER$' is invalid and failed re-validation. When I try to describe the trigger SYS.JIS$ROLE_TRIGGER$ both logged on as an ordinary database user and as the dba,oracle claims that the trigger does not exist.
Please what do I do.
This problem did not occur until I ran the script catproc.sql.Did you try compiling the trigger as SYS? What user did you run the catproc.sql script as? It should have bee run as the SYS user.
-
hello,
whats this?? i just can't insert any data into my table anymore! the trigger is just marked as "invalid", what can i do to make it work again?
thank you.
joshah damn the sequence didnt exist anymore! no idea how it was deleted, i never have done anything with sequences before... :-/
-
(Error): ORA-04079: invalid trigger specification
i was creating a trigger and i had the above error message
that code below shows how i created my trigger
CREATE OR REPLACE TRIGGER TG_GL_GET_MAXIMUM_DATE
AFTER INSERT ON TABLE Al
FOR EACH ROW
strsen VARCHAR2,
strage VARCHAR2,
numcurcode VARCHAR2,
stracctno VARCHAR2,
dt_date DATE
as
strmessg VARCHAR2 (50);
num_cnt NUMBER;
dtmax_date DATE;
begin
here i perform an update and insert here
end ;
what could be the problemThe problem is twofold
- You didn't read the documentation when creating the trigger, so you didn't know a trigger isn't a procedure and doesn't accept parameters
- When you got this error, you didn't read the online error manual, in order to resolve it.
You are kindly requested to do your own research prior to posting, and to avoid asking syntax questions and other questions for which you can easily find the answer yourself in the searchable documentation
at http://tahiti.oracle.com
Sybrand Bakker
Senior Oracle DBA -
ORA-04098 trigger"BANKTRAN_BEF_DEL" is invalid and and failed re-validation
Hey Experts,
I created follwoing trigger successfully...
create or replace trigger BANKTRAN_BEF_DEL
before delete on BANKTRAN
declare
weekend_error EXCEPTION;
not_authentocated_user EXCEPTION;
begin
if TO_CHAR(SysDate,'DY') = 'SAT' or TO_CHAR(SysDate,'DY') = 'SUN' THEN
RAISE weekend_error;
end if;
if SUBSTR(User,1,3) <> 'ATN' THEN
RAISE not_authentocated_user ;
end if;
EXCEPTION
WHEN weekend_error THEN
RAISE_APPLICATION_ERROR (-20001,
'Deletions not allowed on weekends');
WHEN not_authentocated_user THEN
RAISE_APPLICATION_ERROR (-20002,
'Deletions only allowed by authentocated users');
end;
but when deleting the records using query delete from BANKTRAN
getting the below error
ORA-04098 trigger"BANKTRAN_BEF_DEL" is invalid and and failed re-validation
Edited by: SShubhangi on Jan 7, 2013 4:21 PMAlright.
Now Try the DML that causes the Trigger to fire.
And post the details.
PS:- Please use {noformat}{noformat} before and after the SQL statements/results or code samples.
It makes post more readable and you get better help. -
Dear All,
I tried to logign to my database but I'm obtain the folowing message:
ORA-04098: il trigger 'FLOWS_030100.WWV_AIU_FND_USER' non è valido oppure la nuova convalida non è riuscita
I think I cancelled the trigger ... could you post me the code to re-create it?
Please could you help me.
Thnaks a lot
Paolo
Edited by: PaoloT on 22-ott-2009 14.22This is what I get from my XE database :
SYS@xe > set long 100000
SYS@xe > set pages 0
SYS@xe > select description,trigger_body
2 from dba_triggers
3 where trigger_name='WWV_AIU_FND_USER';
wwv_aiu_fnd_user
after insert or update on wwv_flow_fnd_user
for each row
declare
l_hist_id number;
l_found boolean;
begin
if INSERTING and wwv_flow_fnd_user_api.g_password_save is not null then
l_hist_id := wwv_flow_id.next_val;
insert into wwv_flow_password_history
(id, user_id, password, created, security_group_id)
values
(l_hist_id, :new.user_id, wwv_flow_fnd_user_api.g_password_save, trunc
(sysdate), :new.security_group_id);
elsif UPDATING and wwv_flow_fnd_user_api.g_password_save is not null then
-- insert into history table only if this password with created date of toda
y is not already saved
l_found := false;
for c1 in (select id into l_hist_id from wwv_flow_password_history
where user_id = :new.user_id and password = wwv_flow_fnd_user_api.g_pass
word_save and created = trunc(sysdate) and security_group_id = :new.security_gro
up_id) loop
l_found := true;
exit;
end loop;
if not l_found then
l_hist_id := wwv_flow_id.next_val;
insert into wwv_flow_password_history
(id, user_id, password, created, security_group_id)
values
(l_hist_id, :new.user_id, wwv_flow_fnd_user_api.g_password_save, tru
nc(sysdate), :new.security_group_id);
end if;
end if;
wwv_flow_fnd_user_api.g_password_save := null;
end wwv_aiu_fnd_user;
SYS@xe > -
Bad bind variable error on creating trigger
hi
im trying to create a trigger on a table in Oracle and I keep gettin this error:
PLS-00049: bad bind variable 'NEW.ID'
TeamID is a primary Key, it creates the sequence fine, but i get the error on the create trigger,
CREATE TABLE TBLTEAMS
TEAMID NUMBER(5),
NAME VARCHAR2(50 BYTE),
MANAGER VARCHAR2(50 BYTE),
COSTCENTRE NUMBER(9),
PARENTTEAMID NUMBER(5)
create sequence seq_Teamsautonumber;
create trigger trg_Teamsautonumber
before insert on tblteams
for each row
begin
select seq_Teamsautonumber.nextval into :new.id from dual;
end;
any ideas?You have said
:new.idthat means you are trying to load the sequence value into a column that doesn't exist in your table.
you would need to use
:new.teamidAssuming you are trying to auto-populate the TEAMID column on your table. -
Trigger is resulting in ORA-04098 (Trigger invalid)
I'm trying to create a trigger which automatically updates the rpimary key each time a record is inserted in the table CONTACTS_MAN. This table is basically an address book.
SQL> describe contacts_man
Name Null? Type
CONTACT_ID NOT NULL NUMBER
DATEREF DATE
TITLE VARCHAR2(200)
FNAME VARCHAR2(50)
MNAME VARCHAR2(50)
SNAME VARCHAR2(50)
SUFFIX VARCHAR2(5)
COMPANY VARCHAR2(150)
DEPARTMENT VARCHAR2(200)
JOB_TITLE VARCHAR2(150)
BUSINESS_ST1 VARCHAR2(200)
BUSINESS_ST2 VARCHAR2(200)
BUSINESS_ST3 VARCHAR2(200)
BUSINESS_CITY VARCHAR2(200)
BUSINESS_POSTCODE VARCHAR2(20)
BUSINESS_COUNTY VARCHAR2(100)
BUSINESS_COUNTRY VARCHAR2(100)
BUSINESS_REGION VARCHAR2(150)
HOME_ST1 VARCHAR2(150)
HOME_ST2 VARCHAR2(200)
HOME_POSTCODE VARCHAR2(150)
HOME_CITY VARCHAR2(100)
HOME_REGION VARCHAR2(50)
BUSINESS_FAX VARCHAR2(50)
BUSINESS_PHONE VARCHAR2(50)
CAR_PHONE VARCHAR2(20)
COMPANY_MAIN_PHONE VARCHAR2(50)
HOME_PHONE VARCHAR2(50)
MOBILE1 VARCHAR2(50)
MOBILE2 VARCHAR2(50)
ANNIVERSARY DATE
DATE_OF_BIRTH DATE
CHILDREN NUMBER
GENDER VARCHAR2(10)
EMAIL1 VARCHAR2(50)
EMAIL2 VARCHAR2(50)
EMAIL3 VARCHAR2(50)
GOVERNMENT_ID VARCHAR2(500)
HOBBY VARCHAR2(500)
KEYWORDS VARCHAR2(500)
LANGUAGES VARCHAR2(500)
NOTES VARCHAR2(2500)
REFERRED_BY VARCHAR2(150)
SPOUSE VARCHAR2(100)
WEBPAGE VARCHAR2(150)
BUSINESS_PHONE2 VARCHAR2(100)
CATEGORY NUMBER
1) First I create the following sequence:
CREATE SEQUENCE mancontacts_seq
START WITH 10
INCREMENT BY 1;
2) Then create the following trigger:
CREATE OR REPLACE TRIGGER contactman_autokey
BEFORE INSERT ON CONTACTS_MAN
FOR EACH ROW
BEGIN
:NEW.contact_id := mancontacts_seq.NEXTVAL;
END;
WHEN TRYING TO INSERT I GET THE FOLLOWING ERROR:
SQL> INSERT INTO CONTACTS_MAN (FNAME, SNAME)
2 VALUES ('MyFirstName', 'MySurname');
INSERT INTO CONTACTS_MAN (FNAME, SNAME)
ERROR at line 1:
ORA-04098: trigger 'SYS.CONTACTMAN_AUTOKEY' is invalid and failed re-validation
Any suggestions are greatly appreciated.
Thank you!!
Edited by: user9367338 on May 2, 2011 10:10 AM
Edited by: user9367338 on May 2, 2011 10:12 AMThanks for a prompt response. I am on 11g. I dropped the SYS trigger. Connected to the same user but not as DBA.
Re-created sequence and triggers ensuring USER_SCHEMA.trigger and USER_SCHEMA.sequence.
Managed to insert records with no errors now. Didn't quite catch the last comment about 11g since I'm able to create sequences outside the SYS schema (ie: as a normal user). Is this is ok or am I still missing something? Thanks -
ORA-04088: error during execution of trigger
Error Description :
We have more than 100 of records in a csv file which we are processing through a script. At the first execution let
say it generates trigger exception for five records ... when I execute the script second time those five records
are not throwing any exception but may be some other records. But consecutive trigger exception is not happening for any record . If a particular record is throwing exception at first attempt then in the second attempts it's not throwing the trigger exception.
Input file
PROPRTY_ID,NAME,OLD STREET,CITY,STATE,ZIP,NEW STREET,NEW CITY,NEW STATE,NEW ZIP
88527091,SAM PAUL SUMMU ,1061 XYZ,CITY1,ST,95626,5512 XX YY ZZ,TOWN,PA,12345-9812
Error :
88527091,SAM PAUL SUMMU ,1061 XYZ,CITY1,ST,95626,5512 XX YY ZZ,TOWN,PA,12345-9812 - PROPERTY Update Error : ORA-00001: unique constraint (PROD.PK_AUDIT_LOG) violated
ORA-06512: at "PROD.PROPERTY_AUD", line 159
ORA-04088: error during execution of trigger 'PROD.PROPERTY_AUD'
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> desc property
Name Null? Type
PROPERTY_ID NOT NULL NUMBER(20)
TYPE_CODE VARCHAR2(10)
TYPE_PREFIX VARCHAR2(10)
DWELLING_TYPE_CODE NOT NULL VARCHAR2(10)
DWELLING_TYPE_PREFIX NOT NULL VARCHAR2(10)
STREET_NUMBER VARCHAR2(25)
STREET_DIRECTION CHAR(2)
STREET_NAME NOT NULL VARCHAR2(45)
UNIT_NUMBER VARCHAR2(15)
CITY_CODE VARCHAR2(10)
STATE NOT NULL CHAR(2)
ZIP_CODE VARCHAR2(10)
UNIT_TYPE VARCHAR2(10)
UNIT_PREFIX VARCHAR2(10)
COUNTY_CODE VARCHAR2(10)
COUNTRY_CODE NOT NULL VARCHAR2(10)
SQUARE_FEET NUMBER(6)
NUMBER_MOTHER_LAW_UNITS NUMBER(6)
YEAR_BUILT DATE
PROPERTY_VALUE NUMBER(12)
ZIP_PLUS_4 VARCHAR2(4)
SFI_REQ_FLAG CHAR(1)
LAST_MODIFIED NOT NULL DATE
LAST_MODIFIED_BY VARCHAR2(31)
STANDARDIZED_STATUS VARCHAR2(10)
STANDARDIZED_DESC VARCHAR2(200)
SQL> desc audit_log
Name Null? Type
SEQ_NO NOT NULL NUMBER(20)
TABLE_NAME VARCHAR2(31)
USER_STAMP VARCHAR2(31)
TIME_STAMP DATE
TRAN_CODE CHAR(2)
RECORD1 VARCHAR2(2000)
RECORD2 VARCHAR2(2000)
FLAG_FLD CHAR(1)
SFI_FLAG_FLD CHAR(1)
ERROR_NUMBER NUMBER
Update Query which is getting executed :
UPDATE PROPERTY
SET DWELLING_TYPE_CODE = 'SFR',
DWELLING_TYPE_PREFIX = 'DWELLING',
STREET_NUMBER = NULL,
STREET_DIRECTION = NULL,
STREET_NAME = ln_new_street_name, -- <From input file>
UNIT_NUMBER = NULL,
CITY_CODE = ln_city_code, -- <From other Table>
STATE = ln_new_state, -- <From input file>
ZIP_CODE = ln_new_zip_code,
UNIT_TYPE = NULL,
UNIT_PREFIX = NULL,
COUNTY_CODE = ln_county_code, -- <From Other table>
COUNTRY_CODE = 1,
ZIP_PLUS_4 = ln_zip_plus_4 -- <From Input file>
WHERE PROPERTY_ID = ln_property_id; -- <From Other table>
*NOTE :* Property.LAST_MODIFIED field is auto populate through other trigger. It does not causing any problem.
This might be helpful :
SQL> select OWNER, CONSTRAINT_NAME, TABLE_NAME,COLUMN_NAME from dba_cons_columns where CONSTRAINT_NAME='PK_AUDIT_LOG';
OWNER CONSTRAINT_NAME TABLE_NAME COLUMN_NAME
PROD PK_AUDIT_LOG AUDIT_LOG SEQ_NO
PROD_ARCH PK_AUDIT_LOG AUDIT_LOG SEQ_NO
SQL> select SEQ_NO, trim(RECORD1), trim(RECORD2),TIME_STAMP
from audit_log where RECORD1 like '%BUTTE%' order by TIME_STAMP;
SEQ_NO
1675677212
TRIM(RECORD1)
00000000000031814095...SFR .DWELLING ...5512 BUTTE VIEW CT ..15532
.CA.95765 ...1377 .1 .....5000..20100922.SUSMSAHA ..
TRIM(RECORD2)
00000000000031814095...SFR .DWELLING ...5512 BUTTE VIEW CT ..15532
.CA.95765 ...1377 .1 .....5000..20100922.SUSMSAHA ..
TIME_STAMP
22-sep-2010
Trigger Body which is fired and throwing the exception :
create or replace trigger PROPERTY_AUD
before insert or update on PROPERTY
for each row
declare
rec1 varchar2(2000);
rec2 varchar2(2000);
tcode char(1);
ln_seq_id NUMBER:=Null;
ls_sql VARCHAR2(2000):=Null;
begin
select temp_audit_seq.nextval into ln_seq_id from dual;
rec1 := null;
rec2 := null;
if user = 'NONREP_USER' then
return;
end if;
if (dbms_reputil.from_remote = FALSE) then
:NEW.last_modified := sysdate;
if (user = 'SALESFORCE_SYNC') then
:new.last_modified_by := NVL(:new.last_modified_by,USER);
else
:new.last_modified_by := user;
end if;
end if;
if inserting then
rec1 :=
LPAD(:new.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:new.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:new.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:new.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:new.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:new.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.STATE, 2, ' ' ) || '.' ||
RPAD(:new.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:new.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:new.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:new.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:new.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:new.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:new.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_DESC, 200, ' ' );
tcode := 'I';
elsif deleting then
rec1 :=
LPAD(:new.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:new.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:new.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:new.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:new.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:new.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.STATE, 2, ' ' ) || '.' ||
RPAD(:new.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:new.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:new.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:new.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:new.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:new.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:new.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_DESC, 200, ' ' );
tcode := 'D';
else
rec1 :=
LPAD(:old.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:old.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:old.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:old.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:old.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:old.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:old.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:old.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:old.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:old.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:old.STATE, 2, ' ' ) || '.' ||
RPAD(:old.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:old.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:old.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:old.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:old.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:old.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:old.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:old.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:old.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:old.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:old.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:old.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:old.STANDARDIZED_DESC, 200, ' ' );
rec2 :=
LPAD(:new.PROPERTY_ID, 20, '0' ) || '.' ||
RPAD(:new.TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_CODE, 10, ' ' ) || '.' ||
RPAD(:new.DWELLING_TYPE_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.STREET_NUMBER, 25, ' ' ) || '.' ||
RPAD(:new.STREET_DIRECTION, 2, ' ' ) || '.' ||
RPAD(:new.STREET_NAME, 45, ' ' ) || '.' ||
RPAD(:new.UNIT_NUMBER, 15, ' ' ) || '.' ||
RPAD(:new.CITY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.STATE, 2, ' ' ) || '.' ||
RPAD(:new.ZIP_CODE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_TYPE, 10, ' ' ) || '.' ||
RPAD(:new.UNIT_PREFIX, 10, ' ' ) || '.' ||
RPAD(:new.COUNTY_CODE, 10, ' ' ) || '.' ||
RPAD(:new.COUNTRY_CODE, 10, ' ' ) || '.' ||
LPAD(:new.SQUARE_FEET, 6, '0' ) || '.' ||
LPAD(:new.NUMBER_MOTHER_LAW_UNITS, 6, '0' ) || '.' ||
TO_CHAR(:new.YEAR_BUILT, 'YYYYMMDD') || '.' ||
LPAD(:new.PROPERTY_VALUE, 12, '0' ) || '.' ||
RPAD(:new.ZIP_PLUS_4, 4, ' ' ) || '.' ||
RPAD(:new.SFI_REQ_FLAG, 1, ' ' ) || '.' ||
TO_CHAR(:new.LAST_MODIFIED, 'YYYYMMDD') || '.' ||
RPAD(:new.LAST_MODIFIED_BY, 31, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_STATUS, 10, ' ' ) || '.' ||
RPAD(:new.STANDARDIZED_DESC, 200, ' ' );
tcode := 'U';
end if;
ls_sql :='
INSERT INTO AUDIT_LOG
( seq_no,
table_name,
user_stamp,
time_stamp,
tran_code,
record1,
record2)
VALUES
( :id,
:s_table_name,
:s_user_name,
:d_sysdate,
:s_tcode,
:s_rec1,
:s_rec2
EXECUTE IMMEDIATE ls_sql
USING ln_seq_id,
'PROPERTY',
user,
sysdate,
tcode,
rec1,
rec2;
end;
Your suggestion is highly appreciated ..
Edited by: Bipul on Sep 23, 2010 12:40 AMTEMP_AUDIT_SEQ generates number with the increment of +1
Although there seems other sequence populating the AUDIT_LOG table through a different sequence with the increment of +10. So till now there are already 1179 different numbers residing in audit_log.seq_no and yet to be generated by the TEMP_AUDIT_SEQ sequence. I will look into more details.
SQL> select max(seq_no) from audit_log;
MAX(SEQ_NO)
1675689121
SQL> select TEMP_AUDIT_SEQ.nextval from dual;
NEXTVAL
1675677285
SQL> select count(*) From audit_log where seq_no>1675677285;
COUNT(*)
1179
SQL> select count(*) from audit_log where seq_no>1675677283 and mod(seq_no,2)=1;
COUNT(*)
1179
SQL> select seq_no from audit_log where seq_no>1675677283 and mod(seq_no,2)=1 and rownum<12;
SEQ_NO
1675677291
1675677301
1675677311
1675677321
1675677331
1675677341
1675677351
1675677361
1675677371
1675677381
1675677391
11 rows selected.
Thank you Lee and Herald ten Dam ... -
Creating trigger with dbms_sql causes ORA-01912
I use the following procedure to execute statements that are stored in clobs. These statements are very long 'create trigger' statements.
SQL> create or replace procedure executeClob(clob_stmt in clob) is
2
3 n_size number := ceil(dbms_lob.getlength(clob_stmt) / 255);
4 n_counter number;
5
6 t_lines dbms_sql.varchar2s;
7 i_cursor integer := dbms_sql.open_cursor;
8 begin
9
10 for n_counter in 1..n_size loop
11 t_lines (n_counter) := to_char(substr(clob_stmt, 1 + 255 * (n_counter - 1), 255));
12 end loop;
13
14 dbms_sql.parse(i_cursor, t_lines, t_lines.FIRST, t_lines.LAST, false, DBMS_SQL.native);
15 dbms_sql.close_cursor(i_cursor);
16 end;
17 /Every time I call this procedure, I get the following error
ORA-01912: keyword ROW expected
ORA-06512: in "SYS.DBMS_SYS_SQL", Line 1485
ORA-06512: in "SYS.DBMS_SQL", Line 26
ORA-06512: in "NTSDEV6.EXECUTECLOB", Line 14
ORA-06512: in "NTSDEV6.CREATELOGTRIGGER", Line 150
Has anyone an idea what the heck is going on? I can't explain that ORA-01912.
Thanks for your help =)Herzal wrote:
yes, the create-statement works fine when I paste it directly into sql*plusWhen and how did you test that? - Before putting it into the clob of after splitting clob up into strings.
Have you tried writing out the contents of your collection before parsing it? - It sounds like a missing chr(10) after FOR EACH ROW
Regards
Peter -
Error: ORA-02298 while creating a new app at DRM 11.1.2.3.300
Hi All,
There's something weird happening when I try to create a new DRM app at DRM Management Console. After provide all information about database connection and admin long on i am getting the following error during the repository creation :
Creating Repository ... Done.
Creating Tables ... Done.
Creating Views ... Done.
Creating Stored Procedures ... Done.
Creating Indexes ... Done.
Creating Primary Keys ... Done.
Initializing schema with predefined data ...
Database creation failed with this error: ORA-02298: cannot validate (EPM_DRM_DB.FK_CATUSER02) - parent keys not found
It is a fresh install and I don't know why I am having this error. Did someone had this issue too ? How to solve that ?
Thanks in advance...To whom it may concern.....
This issue was related to privileges in database. I've generated the scripts and ran with system user and it worked.
Case closed. -
Getting error while creating trigger!!
Hi Guys,
I am getting the following error while creating trigger in Oracle10g Database in TOAD environment.
Error: PLS-00306: wrong number or types of arguments in call to '='
Table details:
One of the column having BLOB Data type in the table.
In the trigger, I have compared :old and :new values.
CREATE OR REPLACE TRIGGER INPL.trigger_new
AFTER INSERT OR UPDATE OR DELETE
ON TABLE_NEW REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
action_flag VARCHAR2(1);
new_image BLOB;
BEGIN
IF UPDATING
THEN
action_flag := 'U';
ELSIF DELETING
THEN
action_flag := 'D';
ELSIF INSERTING
THEN
action_flag := 'I';
END IF;
IF (:NEW.image = :OLD.image)
THEN
new_image := '';
ELSE
new_image := :NEW.image;
END IF;
INSERT INTO TABLE_NEW(action_flag, date_changed,nimage,oimage) values(new_image,:old.image);
end;
Any one knows about this issue, please let me know with the proper solution.
Thanks for your immediate response!
Regards,
LakshmanCREATE OR REPLACE TRIGGER INPL.trigger_new
AFTER INSERT OR UPDATE OR DELETE
ON TABLE_NEW REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
action_flag VARCHAR2(1);
new_image BLOB;
BEGIN
IF UPDATING
THEN
action_flag := 'U';
ELSIF DELETING
THEN
action_flag := 'D';
ELSIF INSERTING
THEN
action_flag := 'I';
END IF;
IF (:NEW.image = :OLD.image)
THEN
new_image := '';
ELSE
new_image := :NEW.image;
END IF;
INSERT INTO TABLE_AUD(action_flag, date_changed,nimage,oimage) values(new_image,:old.image);
end;
I am getting the error in line at If condition
Error: PLS-00306: Wrong number or tpyes of arguments in call '='
Please let me know if any one knows exact solution!
Thanks in advance!
Regards,
Lakshman -
Hi All,
I have a problem in creating a trigger.
I have two fields named last_updated_by, last_updated_date which
r common to all the tables.
If the user made any change to the exiting record, the values of
the those two colums should get changed automatically with the
username and sysdate.
When I wrote a trigger its giving mutation error.
Can I update these value by stored procedure via trigger?
I heard its possible by DBMS_JOB package. Can anyone give idea?
Thanks in Advance.
Regards
Gopinath KonaYou should only get the mutating table probllem if you're doing
SELCT or DML against the table the trigger's built on. Which
suggests that you're approaching this the wrong way.
Try CREATE TRIGGER blah blah
FOR EACH ROW
:new.last_updated_by := USER;
:new.last_updated_date := SYSDATE;
END;
If that's what you are doing then the problem lies elsewhere.
Rgds, APC -
Error ORA-10980 while creating MV
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Jun 21 11:43:02 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
CREATE MATERIALIZED VIEW ebOrganizationStructure AS
SELECT DEPT.DeptStructureString Structure,
DEPT.DeptShortName DeptCode,
DEPT.DeptName DeptDesc,
NULL DivCode,
NULL DivDesc,
NULL GrpCode,
NULL GrpDesc,
NULL SecCode,
NULL SecDesc,
NULL SSecCode,
NULL SSecDesc
FROM erDepartment DEPT
UNION
SELECT DivStructureString Structure,
DEPT.DeptShortName DeptCode,
DEPT.DeptName DeptDesc,
DIV.DivShortName DivCode,
DIV.DivName DivDesc,
NULL GrpCode,
NULL GrpDesc,
NULL SecCode,
NULL SecDesc,
NULL SSecCode,
NULL SSecDesc
FROM erDepartment DEPT,
erDivision DIV ,
erOrgUnit_Orgunit OGU_OGU1
WHERE OGU_OGU1.OguEntId2 = DIV.EntId
AND OGU_OGU1.OguEntDomId2 = DIV.EntDomId
AND DEPT.EntId = OGU_OGU1.OguEntId1
AND DEPT.EntDomId = OGU_OGU1.OguEntDomId1
UNION
SELECT GRP.GrpStructureString Structure,
DEPT.DeptShortName DeptCode,
DEPT.DeptName DeptDesc,
DIV.DivShortName DivCode,
DIV.DivName DivDesc,
GRP.GrpShortName GrpCode,
GRP.GrpName GrpDesc,
NULL SecCode,
NULL SecDesc,
NULL SSecCode,
NULL SSecDesc
FROM erDepartment DEPT,
erDivision DIV ,
erGroup GRP,
erOrgUnit_Orgunit OGU_OGU1,
erOrgUnit_Orgunit OGU_OGU2
WHERE OGU_OGU1.OguEntId2 = GRP.EntId
AND OGU_OGU1.OguEntDomId2 = GRP.EntDomId
AND DIV.EntId = OGU_OGU1.OguEntId1
AND DIV.EntDomId = OGU_OGU1.OguEntDomId1
AND OGU_OGU2.OguEntId2 = DIV.EntId
AND OGU_OGU2.OguEntDomId2 = DIV.EntDomId
AND DEPT.EntId = OGU_OGU2.OguEntId1
AND DEPT.EntDomId = OGU_OGU2.OguEntDomId1
UNION
SELECT SEC.SecStructureString Structure,
DEPT.DeptShortName DeptCode,
DEPT.DeptName DeptDesc,
DIV.DivShortName DivCode,
DIV.DivName DivDesc,
GRP.GrpShortName GrpCode,
GRP.GrpName GrpDesc,
SEC.SecShortName SecCode,
SEC.SecName SecDesc,
NULL SSecCode,
NULL SSecDesc
FROM erDepartment DEPT,
erDivision DIV ,
erGroup GRP,
erSection SEC,
erOrgUnit_Orgunit OGU_OGU1,
erOrgUnit_Orgunit OGU_OGU2,
erOrgUnit_Orgunit OGU_OGU3
WHERE OGU_OGU1.OguEntId2 = SEC.EntId
AND OGU_OGU1.OguEntDomId2 = SEC.EntDomId
AND GRP.EntId = OGU_OGU1.OguEntId1
AND GRP.EntDomId = OGU_OGU1.OguEntDomId1
AND OGU_OGU2.OguEntId2 = GRP.EntId
AND OGU_OGU2.OguEntDomId2 = GRP.EntDomId
AND DIV.EntId = OGU_OGU2.OguEntId1
AND DIV.EntDomId = OGU_OGU2.OguEntDomId1
AND OGU_OGU3.OguEntId2 = DIV.EntId
AND OGU_OGU3.OguEntDomId2 = DIV.EntDomId
AND DEPT.EntId = OGU_OGU3.OguEntId1
AND DEPT.EntDomId = OGU_OGU3.OguEntDomId1
UNION
SELECT SSEC.SubSecStructureString Structure,
DEPT.DeptShortName DeptCode,
DEPT.DeptName DeptDesc,
DIV.DivShortName DivCode,
DIV.DivName DivDesc,
GRP.GrpShortName GrpCode,
GRP.GrpName GrpDesc,
SEC.SecShortName SecCode,
SEC.SecName SecDesc,
SSEC.SubSecShortName SSecCode,
SSEC.SubSecName SSecDesc
FROM erDepartment DEPT,
erDivision DIV ,
erGroup GRP,
erSection SEC,
erSubSection SSEC,
erOrgUnit_Orgunit OGU_OGU1,
erOrgUnit_Orgunit OGU_OGU2,
erOrgUnit_Orgunit OGU_OGU3,
erOrgUnit_Orgunit OGU_OGU4
WHERE OGU_OGU1.OguEntId2 = SSEC.EntId
AND OGU_OGU1.OguEntDomId2 = SSEC.EntDomId
AND SEC.EntId = OGU_OGU1.OguEntId1
AND SEC.EntDomId = OGU_OGU1.OguEntDomId1
AND OGU_OGU2.OguEntId2 = SEC.EntId
AND OGU_OGU2.OguEntDomId2 = SEC.EntDomId
AND GRP.EntId = OGU_OGU2.OguEntId1
AND GRP.EntDomId = OGU_OGU2.OguEntDomId1
AND OGU_OGU3.OguEntId2 = GRP.EntId
AND OGU_OGU3.OguEntDomId2 = GRP.EntDomId
AND DIV.EntId = OGU_OGU3.OguEntId1
AND DIV.EntDomId = OGU_OGU3.OguEntDomId1
AND OGU_OGU4.OguEntId2 = DIV.EntId
AND OGU_OGU4.OguEntDomId2 = DIV.EntDomId
AND DEPT.EntId = OGU_OGU4.OguEntId1
AND DEPT.EntDomId = OGU_OGU4.OguEntDomId1
Trace file showing error ORA-10980. MV hangs forever and never compiles. If I execute the query it comes up with correct results.
Thanks
RajeshI've seen MVs on 10g to be a bit tempermental. What happens if you build the MV but defer population and populate it as a second step?
-
ORA-12709: error while loading create database character set
I installed Oracle 8.05 on Linux successfully: was able to login
whith SQLPlus, start and stop the db whith svrmgrl etc.
During this install I chose WE8ISO8859P9 as the database
characterset when prompted.
After that I installed Oracle Application Server 3.02, and now
I'm getting the
ORA-12709: error while loading create database character set
message when I try to start up the database, and the database
won't mount.
Platform is RedHat Linux 5.2.
NLS_LANG set to different settings,
e.g. AMERICAN_AMERICA.WE8ISO8859P9
but without success.
Anyone any clue?
Thanks!
nullJogchum Reitsma (guest) wrote:
: I installed Oracle 8.05 on Linux successfully: was able to
login
: whith SQLPlus, start and stop the db whith svrmgrl etc.
: During this install I chose WE8ISO8859P9 as the database
: characterset when prompted.
: After that I installed Oracle Application Server 3.02, and now
: I'm getting the
: ORA-12709: error while loading create database character set
: message when I try to start up the database, and the database
: won't mount.
: Platform is RedHat Linux 5.2.
: NLS_LANG set to different settings,
: e.g. AMERICAN_AMERICA.WE8ISO8859P9
: but without success.
: Anyone any clue?
: Thanks!
You can create the database with WE8DEC character set
and to use the WE8ISO8859P9 on the client or even on Linux.
The NLS_LANG setting doesn't effect the database, but the
interface with the database. The same setting can be used in de
windows 95/98/NT registry.
null
Maybe you are looking for
-
Dynamically add an in memory Bitmap to a List
I'm trying to dynamically add an in memory Bitmap to a List control. I'm trying to create a thumbnail from a larger bmp image and display the thumbnail in the list. The thumbnail images are being created ok but the bitmaps are not displaying in the L
-
How to "move" current entry in number range status for trans. req.
For our project we plan an test system(a copy of productive sytem). We do not expect any transport request from productive system). There we will have some changes(transport requests) in workbench(less) and customizing(most of all) (e.g. Let say the
-
Can ACR4 curve display current adjustments?
I suspect this is not currently possible, but perhaps it might be a future ACR feature to consider. (According to my understanding:) Adjusting Exposure and Black point is similar to moving the end points of a curve or level adjustment. Brightness and
-
Filter by NAV Attrib in IProvider
Hi all. I have a navigational attribute in characteristic & enabled in a InfoCube. I want to filter by this NAV attrib. in BEx. How can I manage this? I mean I see the sort possibility, but don't have any ideas how to filter by navigational attribut
-
There comes a ERROR in installing OFFICE 2013
When i tried to install office 2013 through a valid product key , it answers me that this product key cannot be used in your region. Please tell what should i do about this..........................