Errors in Day 3 exercise
I'm doing this exercise:
http://www.adobe.com/devnet/flex/pdfs/using_remote_object_to_send_data_to_the_server.pdf
In the first part, you are told to delete the previous
project but not the
contents.
Then you are told to create a new project with this path:
C:\adobeFlexTraining\AdobeODT
Further on, you are told to open ReservationData.mxml which
was in the old
project. However, since the path to the old project was
C:\adobeFlexTraining\_workspace\AdobeODT and the new project
eliminates the
_workspace folder in the path, ReservationData.mxml (which
was in the first
project) is unavailable.
Error? Or have I misunderstood something?
Nancy
It is a typing error. I found a couple others in there, too.
I was able to complete the lesson successfully.
Similar Messages
-
Hello Experts,
I am having issue while running CRX console tool (console.sh with CRX 2.2). I was trying to execute "check" command using this tool to perform repository check but unfortunately its throwing following exception while running.
268154 [main] ERROR com.day.crx.core.util.console.AbstractConsole - Unable to perform command check: java.lang.ArrayIndexOutOfBoundsException: 10
Any help would be appriciated.
Thanks,
IfteqarHi All..
Me too facing the same error.. Can some body please help..
I have restarted the db services, jboss but it is of no use...
Regards,
BBCR -
I get the following error message day in and day out, what does it mean -- what can I do to make it go away? "The server responded: “403” to operation CalDAVWriteEntityQueueableOperation."
Now it keeps saying that it is restored but there is still no music or video on it. And a new error is coming up that says "We could not complete your iTunes store request.The iTunes Store is temporarily unavailable. Please try again later."
-
Load Error 1st day on the Job - help please
Hi I just started a new job after 2 years off and have been asked to research a load issue that happened before I started. I need some help in remembering the steps and/or places to look to try and diagnose the issue.
The error occurs when filling 0FI_GL_6.
[GREEN] Data Request Sent Off
[GREY] RFC to Source system successful?
[GREY] does selectable data exist in the source system?
[RED] data select success started ?
[RED] data select success ended ?
[GREEN] processing error in source system reported ?
[GREY] RFC to warehouse successful ?
[RED] processing error in warehouse reported?
[GREY] process successfully finished?
[GREY] all reported data packets received ?
[GREY] all data packets complete?
[GREEN] have all processing steps been carried out?
[GREEN] all data packets updated in all targets?
[GREEN] inadmissible aggregation?
where should i start?Hi Barnaby,
Can you let us know if the request mentioned in the error message is the same as the one you're analysing, or is it an older request?
As for recovering missing deltas, there are many threads on SDN already. I found a few for you, but you can search for more if you require more info.
Cheers,
Reetu
If 1st, 2nd, 4th, and 5th day loads were successful, but 3rd day load fail
Data Load correction in Cube and ODS
reconstruction in cube
Reconstruct the Request
Reloading from old PSA -
Error in Mathscript exercise (3.2) in "Introduction to LabView in 6 hours" tutorial
Hello,
I am working through the 6 hours introductory manual and I have noticed a few minor errors here and there. Also, as I am using version 8.6, some of things are slightly different.
However, I am stumped with exercise 3.2 regarding Mathscript. I even tried running the solution which I downloaded from the ni.com site but I still get the following error:
Error -90011 occurred at Error in function times at line 4. The sizes of the input matrices are incompatible. Verify that the matrices have the same size or that one is a scalar.
Does anyone know of an errata for this manual? Any other suggestions or hints are appreciated.
Thank you
Solved!
Go to Solution.Hi,
I reproduced you error code, it isn't caused by an errata in the manual. Check the line 19 c. it is said that "Now multiply the Exp and In arrays element by element by typing “Out = In.*Exp;” and pressing Enter."
"Error -90011 occurred at Error in function times at line 4" means that
the times function isn't implemented correctly, according to the help
the good syntax is .*
So take a look at your code line 4 and check if the syntax is correct, otherwise replace those symbols byt he function name like in pictures I attached.
Hopefully this helps.
Regards,
Message Edité par Steve Mohamed le 02-19-2009 04:26 PM
Steve M.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Vidéo-t'chats de l'été : présentations techniques et ingénieurs pour répondre à vos questions -
Error defining day LOV as function of month and year
Select '1' day_aff, '01' val from dual union
Select '29' , '29' from dual where '29' <= to_char(last_day(to_date('01.' || '02' || '.' || '2008', 'dd.mm.yyyy')), 'dd') union
Select '30' , '30' from dual where '30' <= to_char(last_day(to_date('01.' || '02' || '.' || '2008', 'dd.mm.yyyy')), 'dd') union
Select '31' , '31' from dual where '31' <= to_char(last_day(to_date('01.' || '02' || '.' || '2008', 'dd.mm.yyyy')), 'dd')
order by 2
That works OK.
If I replace '02' by :P10_MONTH, &P10_MONTH. or v('P10_MONTH') and 2008 by :P10_YEAR, &P10_YEAR. or v('P10_YEAR') , I get the following error on LOV creation (in shared components or in item's LOV section):
LOV query is invalid, a display and a return value are needed, the column names need to be different. If your query contains an in-line query, the first FROM clause in the SQL statement must not belong to the in-line query.
Any workaround?
IgorHi Igor,
I think it is the || in the SQL that is causing the problem. You can get around this by having a hidden page item that is computed in the Before Header process point that calculates the first day of the selected month.
I've done that on this page: [http://apex.oracle.com/pls/otn/f?p=35917:16]
Also, you can simplify your SQL statement to something like:
SELECT LEVEL d, LEVEL r
FROM DUAL
CONNECT BY LEVEL <= TO_NUMBER(TO_CHAR(LAST_DAY(TO_DATE(v('P16_FIRSTDATE'),'DD/MM/YYYY')),'DD'))(P16_FIRSTDATE is the item that contains the computed date)
Andy -
Same Question (0x3b21 error) Different Day
I have a Blackberry 8100 Series Pearl
The Device Platform is Version 3.2
The Application is Version 4.5
DM Version 4.7
I am running this on Windows XP 2002 and I am trying to connect with Outlook. I recently had a Trojan horse virus which I eliminated. I believe that this virus caused my BB to stop syncing with my Outlook Calendar about a week ago. After eliminating the virus, I updated my BB and DM software online to the above versions. Since the update, I have been receiving the 0x3b21 error code and have not been able to synch my calendar or my address book.
I have attempted to follow the "How to determine which application is being process when Intellisync fails" and "How to turn on advanced sychronization logging for Intellisync when BlackBerry smartphone synchronization fails" solutions. One of my problems is that my DM does not have the Intellisync button, that is where I get stuck with the directions and can not continue. I have been at this for about a day and am quite frustrated. I have read a majority of the previous posts, but usually end up at the same point. Any help would be greatly appreciated and please let me know if there is any additional information that you would like or need. Sorry, I forgot to actually ask a question: How to I get my BB to start syncing again?-Delete the Intellisync folder.
Close the desktop manager application.
Disconnect the BB from the computer.
Double Click on My Computer > Local Disk (C Drive > Documents and Settings > (username) > Application Data > Research In Motion > Blackberry > Intellisync.
Note: If the Application Data folder is not present, click Tools>Folder Options at the top of the screen.
Click the View Tab, then click on Show Hidden Files and Folders.
Click Apply>Ok and continue through the remaining steps.
Delete everything within the Intellisync folder.
Launch desktop manager and attempt sync the device with the computer.
~Tami~
Intellectuals solve problems; geniuses prevent them.
-- Albert Einstein -
DB_VERSION_MISMATCH error every day
Every day when I run my test.pl program for the first time, I see this:
DbEnv::open: DB_VERSION_MISMATCH: Database environment version mismatch in test.pl,
line 35
The docs say that this error means "The version of the Berkeley DB library doesn't match the version that created the database environment". But I haven't changed my BDB XML installation.
If I delete all the files in my test database directory and reload my test data, everything is fine. I can run my test program again and again all day long. But when I come in next morning, I get the error! This is the code I'm using:
my $ENVIRONMENT = 'test-env';
my $ENV_FLAGS = Db::DB_CREATE | Db::DB_INIT_LOCK | Db::DB_INIT_LOG
| Db::DB_INIT_MPOOL | Db::DB_INIT_TXN;
my $env = new DbEnv;
x eval { $env->open($ENVIRONMENT, $ENV_FLAGS, 0) };'x' is just a function that traps the exception. Line 35 is the line with the open() call.
Does anybody know what I'm doing wrong?
Thanks, DaveCould your installation be picking up another version
— probably preexisting — of the Berkeley DB libs?Good thought. I've done some digging.
There are two versions of Berkeley DB already installed on my system, according to YaST: 4.3.27-3.1 and 1.85-89. I don't want to interfere with those because I don't know what might be using them. Then there's the version which came with the dbxml I downloaded: 4.3.29, which is presently under /opt/berkeley
I seem to be picking up 4.3.29. When I run /opt/berkeley/bin/db_verify -V it says "Sleepycat Software: Berkeley DB 4.3.29: (September 6, 2005)". While if I run /usr/bin/db_verify -V it says "Sleepycat Software: Berkeley DB 4.3.27: (June 1, 2005)" but both are supposedly compatible with the current dbxml release, according to the release notes.
If I run /opt/berkeley/bin/dbxml -h test-env-old (i.e. using yesterday's data) it says
Program version 4.3 doesn't match environment version
Error opening environment test-env-old: DbEnv::open:
DB_VERSION_MISMATCH: Database environment version mismatchbut rather annoyingly doesn't tell me what version it thinks the data is!!!
dbxml is happy with a new test-env database that I've created today in Perl.
I haven't found any way to find out what version the data in test-env-old thinks it is. Is there some utility that will do this? I tried looking in the files but didn't spot anything.
That dbxml behaves the same as my test program seems to eliminate some Perl artefact as the source of this problem but in case it's useful to you or some Sleepycat person, I added a call to DbXml::printVersionInfo() to my test program, which duly reports:
perl : 5.008006
dbxml : Sleepycat Software: Berkeley DB XML 2.2.13: (December 19, 2005)
db : Sleepycat Software: Berkeley DB 4.3.29: (September 6, 2005)
xerces: whateverso it seems to be finding the right db library.
I've seen that happen elsewhere. Usually it results
in a library compatibility error though, rather than
a database version error.Any other ideas? I really appreciate all the help you're giving me.
This is a minor nuisance while I'm testing, but it's a complete showstopper for using dbxml in production, of course. -
Resetting photostream at iCloud, getting error for days
I am trying to reset my photostream online, and I keep getting an error message - server error. Why is this happening and how can I resolve it?
Hi Tim,
Thanks a lot.......
To find solution for this i tried this options all are failed:
1) I created a user,this user can schedule and view but he cant edit report. I scheduled from this user, also it failed some day.
2)I copied all the reports in to new folder from that i scheduled but no luck.
one more point... i am having 9 reports to schedule run daily between 11AM to 11.45AM.Is this will b any problem for scheduling.
In all the above cases i am getting same errors as posted above.
here i am showing one pic the report failed when it is in that sequence of 9 reports but success when it is scheduled run immediate.
!http://img263.imageshack.us/img263/6343/errorh.jpg!
Its urgent for me......pls help me.
Thanks,
KSS -
Oracle Day Exercise--Creating Business Services
Hello,I am a beginner of Jdeveloper ,I met some problems in practise the 'Creating Business Services ',below is the logging message, Is there any experts and would please give me some instruction on it ?
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config>
D:\oracle\jdev1012\jdk\bin\javaw.exe -ojvm -classpath D:\oracle\jdev1012\j2ee\home\oc4j.jar;D:\oracle\jdev1012\jdev\lib\jdev-oc4j.jar -Dhttp.proxyHost=rkfdproxy -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=192.168.*|172.22.1.*|10.*|190.*|*.sspi.com|*.aesysllc.com|*.woodward.com|localhost|127.0.0.1 -Xverify:none -Ddisable.checkForUpdate=true -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doracle.dms.sensors=NONE -Doc4j.jms.usePersistenceLockFiles=false com.evermind.server.OC4JServer -config D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
05/03/25 09:59:55 Copying default deployment descriptor from archive at D:\oracle\jdev1012\jdev\mywork\EmployeeRequisitionApplication\Lab2_BusinessServices\classes/META-INF/orion-ejb-jar.xml to deployment directory D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\application-deployments\current-workspace-app\classes...
05/03/25 09:59:55 Auto-deploying - file:/D:/oracle/jdev1012/jdev/mywork/EmployeeRequisitionApplication/Lab2_BusinessServices/classes/ (No previous deployment found)...
05/03/25 09:59:55 Auto-deploying - compiling and loading...
D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0.java:567: error #300: variable requestApproval___101_wrapperPE not found in class EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0
requestApproval___101_wrapperPE = (PhaseEventIntf) ApplicationServer.phaseEventFactory().create(requestApproval___101_noun, "wrapper", "wrapper");
^
D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0.java:569: error #300: variable requestApproval___101_wrapperPE not found in class EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0
requestApproval___101_wrapperPE.deriveMetric(SensorIntf.all);
^
D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0.java:364: error #300: variable requestApproval___101_wrapperPE not found in class EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0
requestApproval___101_wrapperPE.stop(wtoken);
^
D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0.java:210: error #300: variable requestApproval___101_wrapperPE not found in class EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0
wtoken = requestApproval___101_wrapperPE.start();
^
D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0.java:263: error #300: class SatelessSessionEJBHome not found in class EmployeeReqFacadeLocal_StatelessSessionBeanWrapper0
context = ((SatelessSessionEJBHome)home).getLocalContextInstance();
^
D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacade_StatelessSessionBeanWrapper2.java:246: error #300: class bolean not found in class EmployeeReqFacade_StatelessSessionBeanWrapper2
bolean created = false;
^
D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacade_StatelessSessionBeanWrapper2.java:528: error #300: variable contextCntainer not found in class com.evermind.server.ThreadState
thread.contextCntainer = previousContainer;
^
D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacadeHome_StatelessSessionHomeWrapper3.java:228: error #300: class PhaseEventItf not found in class EmployeeReqFacadeHome_StatelessSessionHomeWrapper3
create___0_wrapperPE = (PhaseEventItf) ApplicationServer.phaseEventFactory().create(create___0_noun, "wrapper", "wrapper");
^
D:\oracle\jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\EmployeeReqFacadeLocalHome_StatelessSessionHomeWrapper1.java:227: error #300: variable ApplicationSerer not found in class EmployeeReqFacadeLocalHome_StatelessSessionHomeWrapper1
ApplicationSerer.stateFactory().create(create___0_noun, "trans-attribute", "", "trans attribute", "unspecified");
^
9 errors
Error compiling D:\oracle\jdev1012\jdev\mywork\EmployeeRequisitionApplication\Lab2_BusinessServices\classes: Syntax error in source
Error in application current-workspace-app: Error loading package at file:/D:/oracle/jdev1012/jdev/mywork/EmployeeRequisitionApplication/Lab2_BusinessServices/classes/,
Error compiling D:\oracle\jdev1012\jdev\mywork\EmployeeRequisitionApplication\Lab2_BusinessServices\classes: Syntax error in source
05/03/25 09:59:59 done.
05/03/25 09:59:59 Error instantiating application 'current-workspace-app' at file:/D:/oracle/jdev1012/jdev/mywork/EmployeeRequisitionApplication/EmployeeRequisitionApplication-oc4j-app.xml: Error initializing ejb-module; Exception Error in application current-workspace-app: Error loading package at file:/D:/oracle/jdev1012/jdev/mywork/EmployeeRequisitionApplication/Lab2_BusinessServices/classes/,
Error compiling D:\oracle\jdev1012\jdev\mywork\EmployeeRequisitionApplication\Lab2_BusinessServices\classes: Syntax error in source
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 7382 ms.
05/03/25 10:00:00 Oracle Application Server Containers for J2EE 10g (10.1.2.0.0) initializedMost likely the issue is that the deployment profile is not assembling all the required components, in this case EJB which was exposed as the Web Service.
I also notice that you are deploying to 10.1.2 OC4J, these labs are designed to work with OC4J 10.1.3 Developer preview3 (DP3) not OC4J 10.1.2
Make sure you are deploying to OC4J 10.1.3 DP3, and also double check your deployment profile to make sure all the required components are assembled.
raghu
JDev Team -
Hi,
While writing expression I am getting unrecognized token Day in below expression.
DateAdd(Day,1,@[User::Insertdate])
please help on it.
Thanks
AvsModify to become
DATEADD("day", 1, @[User::InsertDate)
Arthur My Blog -
Running Firefox 4.0, was running Sync 1.7 on a Windows XP machine. Became so frustrated with the constant error message at the bottom of my screen (Sync encountered an error while syncing: Unknown error. Sync will automatically retry this action.) that I uninstalled Sync. However, after multiple Ff restarts the error message continues to appear.
I noted that at least 10 other people had posted this as a problem in the forums but didn't see any solutions.
Can you help?I know the last reply was from a couple weeks ago, but honestly, I haven't been able to find anything else in the last week of searching Google. I'm new to the MDT process but I'm having the same issue with what you posted. I can shift-F10 during the "Applying
system settings" and open my unattend.xml file and remove the IEWelcomeMsg line and the image deploys perfectly, so I know that's my problem. I can't figure out where that line is coming from. I have edited every unattend.xml file in the Templates folder under
MDT and also the one in my deployment task sequence, but somewhere during that deployment, that one setting gets added back to the unattend file and nukes the whole image. I'm about to pull my hair out. I'm implementing MDT to save time but I feel like the
last couple of weeks trying to get it to work have been a waste. I have thought about backing my reference image back to IE9, but having to deploy IE10 post image seems like it's an unnecessary burden. Any help would be appreciated.
~Adam -
HT4528 get a no sim error every day
after updating to 6.1.4 about once per day y iphone loses its SIM the carrier area says "no sim" and the screen says "no sim found"
when I reset it I get to verizon and all is fine for another day.Take out the SIM and clean it (a pencil eraser is the best tool, but get all of the rubber particles off), then re-insert it. If that doesn't resolve the problem get a new SIM from Verizon.
-
URGENT: Error 3 days before GoLive, DUMMY_NO_REQ_CREATED
Hii Guru,
Now more than other situations I need your help.
We are trying to load data from WF standar infopackage (0BPM_WIHEAD). Our version is 3.5.
When the load are finished, we have the nex error "01.12.2011 20:33:15 Proceso "Ejecutar InfoPaquete", variante "PC - 0BPM_WIHEAD - INIT" tiene status "Finalizado con error" (inst."DUMMY_NO_REQ_CREAT I RSPC 9"
If we can't load, they don't allow to do GOLIVE. Please, any comments it will be appreciated.
Thanks in advance,
Manuel
Edited by: Manuel Guijarro on Dec 2, 2011 10:08 AMHi manuel,
Can check couple of points :
i) Firstly check if there is some load previously going on and still not completed in yellow state. Check the earlier log see if there any yellow step. Make it forcesfully red and repeat your info package loading.
ii) Check if there is any entry creatd in RSSELDONE table for your load.also check the details tab and analyze teh flow see if everything is good with trfc and idocs.
revert with this .
Thanks,
Deepak -
Anonymous UUID: 64C7683C-3633-FFAF-37B7-B748DB0D593F
Sun Oct 19 10:22:09 2014
*** Panic Report ***
Panic(CPU 2): Unresponsive processor (this CPU did not acknowledge interrupts) TLB state:0x0
RAX: 0x00000000de000000, RBX: 0xffffff8036d9f5f8, RCX: 0xffffff8036f122a0, RDX: 0x000000a400000000
RSP: 0xffffff80c0cd3cd0, RBP: 0xffffff80c0cd3d40, RSI: 0x000000a499e2971e, RDI: 0xffffff80369bc408
R8: 0x0000000000000001, R9: 0x0000000000000342, R10: 0x0000000000000000, R11: 0x0000000000000081
R12: 0x0000000000000000, R13: 0xffffff8038a6ca28, R14: 0xffffff80369bc400, R15: 0xffffff80369bc408
RFL: 0x0000000000000006, RIP: 0xffffff8026c11e60, CS: 0x0000000000000008, SS: 0x0000000000000010
Backtrace (CPU 2), Frame : Return Address
0xffffff80b9a9ef60 : 0xffffff8026c251a6
0xffffff80b9a9ef80 : 0xffffff8026c1dd08
0xffffff80b9a9efd0 : 0xffffff8026c3a609
0xffffff80c0cd3d40 : 0xffffff8026b741cc
0xffffff80c0cd3db0 : 0xffffff8026b270d6
0xffffff80c0cd3df0 : 0xffffff8026b26ffd
0xffffff80c0cd3e40 : 0xffffff8026b23767
0xffffff80c0cd3e90 : 0xffffff8026b33e8d
0xffffff80c0cd3f10 : 0xffffff8026c0a142
0xffffff80c0cd3fb0 : 0xffffff8026c3ac66
BSD process name corresponding to current thread: diagnosticd
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000026800000
Kernel text base: 0xffffff8026a00000
__HIB text base: 0xffffff8026900000
System model name: MacBookAir4,1 (Mac-C08A6BB70A942AC2)
System uptime in nanoseconds: 415356415053
last loaded kext at 9944982537: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7fa890d000, size 32768)
last unloaded kext at 127184470793: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7fa7923000, size 65536)
loaded kexts:
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.
Model: MacBookAir4,1, BootROM MBA41.0077.B11, 2 processors, Intel Core i5, 1.6 GHz, 4 GB, SMC 1.74f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE9), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM128C, 121.33 GB
USB Device: FaceTime Camera (Built-in)
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
Thunderbolt Bus: MacBook Air, Apple Inc., 8.1Anonymous UUID: 64C7683C-3633-FFAF-37B7-B748DB0D593F
Sun Oct 19 10:22:09 2014
*** Panic Report ***
Panic(CPU 2): Unresponsive processor (this CPU did not acknowledge interrupts) TLB state:0x0
RAX: 0x00000000de000000, RBX: 0xffffff8036d9f5f8, RCX: 0xffffff8036f122a0, RDX: 0x000000a400000000
RSP: 0xffffff80c0cd3cd0, RBP: 0xffffff80c0cd3d40, RSI: 0x000000a499e2971e, RDI: 0xffffff80369bc408
R8: 0x0000000000000001, R9: 0x0000000000000342, R10: 0x0000000000000000, R11: 0x0000000000000081
R12: 0x0000000000000000, R13: 0xffffff8038a6ca28, R14: 0xffffff80369bc400, R15: 0xffffff80369bc408
RFL: 0x0000000000000006, RIP: 0xffffff8026c11e60, CS: 0x0000000000000008, SS: 0x0000000000000010
Backtrace (CPU 2), Frame : Return Address
0xffffff80b9a9ef60 : 0xffffff8026c251a6
0xffffff80b9a9ef80 : 0xffffff8026c1dd08
0xffffff80b9a9efd0 : 0xffffff8026c3a609
0xffffff80c0cd3d40 : 0xffffff8026b741cc
0xffffff80c0cd3db0 : 0xffffff8026b270d6
0xffffff80c0cd3df0 : 0xffffff8026b26ffd
0xffffff80c0cd3e40 : 0xffffff8026b23767
0xffffff80c0cd3e90 : 0xffffff8026b33e8d
0xffffff80c0cd3f10 : 0xffffff8026c0a142
0xffffff80c0cd3fb0 : 0xffffff8026c3ac66
BSD process name corresponding to current thread: diagnosticd
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000026800000
Kernel text base: 0xffffff8026a00000
__HIB text base: 0xffffff8026900000
System model name: MacBookAir4,1 (Mac-C08A6BB70A942AC2)
System uptime in nanoseconds: 415356415053
last loaded kext at 9944982537: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7fa890d000, size 32768)
last unloaded kext at 127184470793: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7fa7923000, size 65536)
loaded kexts:
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.
Model: MacBookAir4,1, BootROM MBA41.0077.B11, 2 processors, Intel Core i5, 1.6 GHz, 4 GB, SMC 1.74f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE9), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM128C, 121.33 GB
USB Device: FaceTime Camera (Built-in)
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
Thunderbolt Bus: MacBook Air, Apple Inc., 8.1
Maybe you are looking for
-
How to calculate delivery date
Hello, I'm trying to use a formatted search in a Sales Order to calculate the delivery date per row. I found the following that could be my answer, but not sure how to proceed: DATEADD (datepart, number, date) Based on the item information on tab 'Pl
-
Using InterMedia Text with FrameMaker, StarOffice...
I'm planning to use InterMedia text with various kinds of documents, but inso filter does not support them. In particular, it does not support: - Framemaker - PostScript (I know it works on encapsulated PostScript) - Applix Where can I find the right
-
TOP LIMIT FOR "OR" SEARCH IN METADATA FILTER
Would anyone know the top limit for an "OR" search in the Metadata Filter. Like if you are searching with keywords, how many keywords can you choose in the same column? Could it be 20? 50? I have an iMac with Mountain Lion 10.8.4 and Lightroom 5.
-
Customized BAPI *Priority A*
Hey, Need a Help with Writing Custom Bapi. We have checked with exsisting BAPIs but that not sufficient to do the JOB. So now we are exploring about our own custom Bapi. Requirement is to Write 2 BAPI's. 1) To post the data in the R/3. 2) To reteriv
-
InDesign keeps crashing when opening
Today I was on my laptop and had problems with InDesign opening. I cleared the caches and that seemed to work. Weirdly when I arrived home and opened InDesign on my desktop computer, the same thing happened. However, this time I'm having no joy. Both