Errors on schema import/export
Hi all,
I have a release 10.2.0.3.0.
I exported a schema with
exp user/password OWNER=PIN20 FILE=/opt/oracle/admin/dportal/export/PIN20_new.dmp log=/opt/oracle/admin/dportal/export/expPIN20.log
and now I try to import with
imp user/password FILE=/opt/oracle/admin/dportal/export/PIN20_new.dmp log=/opt/oracle/admin/dportal/export/impPIN20.log fromuser=PIN20 touser=PIN24
but I get the following errors:
IMP-00017: following statement failed with ORACLE error 1403:
+"BEGIN "+
+"SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_QUEUE_TABLE('IFW_SYNC',1,16392,3,0,0,'', SY"+
+"S.DBMS_AQ_IMP_INTERNAL.DBVER_10i, '01:00');"+
+"COMMIT; END;"+
IMP-00003: ORACLE error 1403 encountered
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_AQ_SYS_IMP_INTERNAL", line 509
ORA-06512: at "SYS.DBMS_AQ_IMP_INTERNAL", line 33
ORA-06512: at line 2
IMP-00017: following statement failed with ORACLE error 1403:
+"BEGIN "+
+"SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_QUEUE(HEXTORAW('4465326A47233008E0430A44394"+
+"03008'),'IFW_SYNC','IFW_SYNC_QUEUE',0,5,6,0,0,'');"+
+"COMMIT; END;"+
IMP-00003: ORACLE error 1403 encountered
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_AQ_SYS_IMP_INTERNAL", line 641
ORA-06512: at "SYS.DBMS_AQ_IMP_INTERNAL", line 60
ORA-06512: at line 2
IMP-00091: Above error occurred on the following function and object: CREATE IFW_SYNC_QUEUE. Remaining PL/SQL blocks for this object will be skipped.
IMP-00017: following statement failed with ORACLE error 1403:
+"BEGIN "+
+"SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_QUEUE(HEXTORAW('4465326A47223008E0430A44394"+
+"03008'),'IFW_SYNC','AQ$_IFW_SYNC_E',1,0,0,0,0,'exception queue');"+
+"COMMIT; END;"+
IMP-00003: ORACLE error 1403 encountered
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_AQ_SYS_IMP_INTERNAL", line 641
ORA-06512: at "SYS.DBMS_AQ_IMP_INTERNAL", line 60
ORA-06512: at line 2
IMP-00091: Above error occurred on the following function and object: CREATE AQ$_IFW_SYNC_E. Remaining PL/SQL blocks for this object will be skipped.
About to enable constraints...
Import terminated successfully with warnings.
How can I solve the issue?
Thanks.
Pl see the solution in MOS Doc 817640.1 (IMP-17 IMP-3 ORA-1403 and ORA-6512 Errors on DBMS_AQ_SYS_IMP_INTERNAL When Performing An Import Of A Schema)
http://download.oracle.com/docs/cd/B19306_01/server.102/b14257/manage.htm#sthref443 (see section "Export Modes")
HTH
Srini
Similar Messages
-
Lax validation errors on schema import ('version' exceeds maximum length)
I have a schema as per below. I'm trying to import it into Oracle 10.2.0.2.0. However, I'm getting the following lax validation error:
Error loading ora_business_rule.xsd:ORA-30951: Element or attribute at Xpath /schema[@version] exceeds maximum length
I can fix it by modifying the attribute and shortening it but I'd like to know why it's occuring. Insofar as I can tell there is no imposed limit on the size of schema attributes according to the W3C standard. Which then makes me wonder: does Oracle impose limits on the length of all attributes or is this specific to 'version' ? If there is a limit, what is the upper bound (in bytes) ? Where is this documented?
Cheers,
Daniel
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:br="http://foo.com/BusinessRule_PSG_V001" targetNamespace="http://foo.com/BusinessRule_PSG_V001" elementFormDefault="qualified" attributeFormDefault="unqualified" version="last committed on $LastChangedDate: 2006-05-19 11:00:52 +1000 (Fri, 19 May 2006) $">
<xs:element name="edit">
<xs:complexType>
<xs:sequence>
<xs:element name="edit_id" type="xs:string"/>
<xs:element ref="br:business_rule"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="derivation">
<xs:complexType>
<xs:sequence>
<xs:element name="derivation_id" type="xs:string"/>
<xs:element ref="br:derivation_type"/>
<xs:element ref="br:business_rule"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="derivation_type">
<xs:simpleType>
<xs:restriction base="xs:NMTOKENS">
<xs:enumeration value="complex"/>
<xs:enumeration value="format"/>
<xs:enumeration value="formula"/>
<xs:enumeration value="recode"/>
<xs:enumeration value="SAS code"/>
<xs:enumeration value="transfer"/>
<xs:enumeration value="count"/>
<xs:enumeration value="sum"/>
<xs:enumeration value="max"/>
<xs:enumeration value="min"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="business_rule"></xs:element>
</xs:schema>Opps -- Sorry it's a decision we took when looking at Version
When we registered the Schema for Schemas during XDB bootstrap the Version attriubte was mapped to varchar2(12).
SQL> desc xdb.xdb$schema_T
Name Null? Type
SCHEMA_URL VARCHAR2(700)
TARGET_NAMESPACE VARCHAR2(2000)
VERSION VARCHAR2(12)
NUM_PROPS NUMBER(38)
FINAL_DEFAULT XDB.XDB$DERIVATIONCHOICE
BLOCK_DEFAULT XDB.XDB$DERIVATIONCHOICE
ELEMENT_FORM_DFLT XDB.XDB$FORMCHOICE
ATTRIBUTE_FORM_DFLT XDB.XDB$FORMCHOICE
ELEMENTS XDB.XDB$XMLTYPE_REF_LIST_T
SIMPLE_TYPE XDB.XDB$XMLTYPE_REF_LIST_T
COMPLEX_TYPES XDB.XDB$XMLTYPE_REF_LIST_T
ATTRIBUTES XDB.XDB$XMLTYPE_REF_LIST_T
IMPORTS XDB.XDB$IMPORT_LIST_T
INCLUDES XDB.XDB$INCLUDE_LIST_T
FLAGS RAW(4)
SYS_XDBPD$ XDB.XDB$RAW_LIST_T
ANNOTATIONS XDB.XDB$ANNOTATION_LIST_T
MAP_TO_NCHAR RAW(1)
MAP_TO_LOB RAW(1)
GROUPS XDB.XDB$XMLTYPE_REF_LIST_T
ATTRGROUPS XDB.XDB$XMLTYPE_REF_LIST_T
ID VARCHAR2(256)
VARRAY_AS_TAB RAW(1)
SCHEMA_OWNER VARCHAR2(30)
NOTATIONS XDB.XDB$NOTATION_LIST_T
LANG VARCHAR2(4000)
SQL> -
Schema Import failed :IMP-00008: unrecognized statement in the export file:
Hi ,
I was running a database schema import from a database DMP file.
I encountered the following error in the log file that was getting generated :
IMP-00008: unrecognized statement in the export file:
All the tables got copied except for one. Now what I have thought of is to import that one table again after taking an export from the prod schema.
But what about the functions,triggers,procedures ?? How do i bring all of them in the schema ?
If reimporting the schema again the only option ?
Thanks
KkHello,
In this order:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1023988
Table Objects: Order of Import
Table objects are imported as they are read from the export file. The export file contains objects in the following order:
1. Type definitions
2. Table definitions
3.Table data
4.Table indexes
5. Integrity constraints, views, procedures, and triggers
6. Bitmap, function-based, and domain indexes
The order of import is as follows: new tables are created, data is imported and indexes are built, triggers are imported, integrity constraints are enabled on the new tables, and any bitmap, function-based, and/or domain indexes are built. This sequence prevents data from being rejected due to the order in which tables are imported. This sequence also prevents redundant triggers from firing twice on the same data (once when it is originally inserted and again during the import).
For example, if the emp table has a referential integrity constraint on the dept table and the emp table is imported first, all emp rows that reference departments that have not yet been imported into dept would be rejected if the constraints were enabled.
When data is imported into existing tables, however, the order of import can still produce referential integrity failures. In the situation just given, if the emp table already existed and referential integrity constraints were in force, many rows could be rejected.
A similar situation occurs when a referential integrity constraint on a table references itself. For example, if scott's manager in the emp table is drake, and drake's row has not yet been loaded, scott's row will fail, even though it would be valid at the end of the import. -
Getting an error while importing/exporting the universe from my BO Designer
Hi,
I am facing a issue while importing/exporting the universe from my BO Designer to the Server.The error is mentioned below.
'File Repository Server Input is down'
Once I click the OK button on this error message, it displays the message
'Could not import the Universe'.
I tried the check the status of the File Repository Server (Ouput and Input) and also the of the Root Directory on the Physical Server and also my machine.They all have read-write access.
Installed Version of the Universe Designer Client: Business Object XI Release 2 SP3
Installed Version of the BO Enterprise Server: Business Object XI Release 2 SP2
Can you please help me to resolve the issueHi,
The step you have mentioned may not be applicable to my issue as one of my colleagues can import/export the universe from the same server
The second thing is that a DB2 Client v9 is installed on both mine and my colleagues system.The Designer software can recognise the DB2 drivers on his system but it cannot recognise the same drivers on my system.I even checked the versions of the BO software installed on his and my system and they are same.
The only difference is that his machine is a Windows XP Machine and mine is a Network Desktop.
Will any of the above two things will affect the operation of the BO Designer.
Thanks
Prabhakar Korada -
Error in import/export of functions - for the apex team
After exporting functions, the import gives an error.
Reason :
the export generates a script with
function \
function
importing this script gives an error because only the first function is imported. or the functions seems to be togheter one function
the export should generate
function
function
LeoLeo - I logged into your workspace and exported the functions. The generated script looks perfectly good. I then uploaded that file into my own workspace and ran the script. The functions were all created as separate functions.
There must be something happening at your end causing newline characters in the file to be lost or something. Or maybe I didn't follow exactly the steps you did.
BTW, when you mentioned the "\" character in your original post, I assumed you meant the "/" character.
Scott -
Error message when importing data using Import and export wizard
Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Error import / export in console standalone
hai all,
error import / export in console standalone
iam logged in 9i console standalone pc not connected any other pc.
unable to import or export or load any database
because the error shows that
only on OMS mode is possible
how can import or export or load?
any help?
thanks in advance
rcs
------I have no idea what you are asking or in what environment you are work.
Lets start with the need for a version number ... 9i is not a version ... it is a marketing label. Do you mean 9.0.? or 9.2.0.1 or 9.2.0.8 no one knows.
Second I have no idea what a you intend to convey with the statement "console standalone pc."
Third "unable" means what? That the pc crashed and burned and is a smoldering cinder or you received some error message you thought too unimportant to post? Again ... you've given us no useful information.
Finally what do you mean by OMS? Is this OMS as in the Java application running as part of the Grid Control or something else?
Finally what are you trying to import? How? A clear explanation is required.
If someone reading what you post can not understand or duplicate what you did because of lack of information you will not receive any help. -
Strange error message when importing one schema into another
Hello,
using Oracle Workshop for Weblogic 10.3, I am trying to define a new schema A which imports the namespace of an already existing schema B. The schema validator states that schema B is valid.
However, when I try to add an import directive in the design view and try to select schema B as the schema location I get the error message that B.xsd is an invalid schema file. When I manually add the import directive in the source view, I can refer to all elements of the namespace defined in schema B. Unfortunately, schema A now is marked as invalid with the error message "The dependency is not configure in schema resource. Possible reason one or more import/include is not set correctly."
Even external schema validation tools do not find any validation errors in schema B.
Any ideas?
Kind regards
AlexanderThe dependency is not configure in schema resource. Possible reason one or more import/include is not set correctly."http://forums.oracle.com/forums/thread.jspa?threadID=1048184&tstart=0
Regards,
Anuj -
Installed CC trial and opened LR, panels on left and right not appearing. keep getting an error message "an error occured while attempting to change modules" plus no import/export options.
Error changing modules | Lightroom
Mylenium -
"ActiveX Error, Unknown Error" when trying to Import/Export Properties
Hi,
When I try to "Import/Export Properties…" Testand returnig this error:
Attacing a max report of my system.
Have someone seen this problem?
BR Are
Attachments:
max_report.zip 7 KBHi,
MAX gives useful information for debugging. TestStand version, operation system, cpu, memory….
I am not sure that I have “TestStand Version Selector” since only one version of TestStand is installed.( NI TestStand 4.5.1).
Are you using the PropertyLoader? My intention is to use the PropertyLoader. But after I click on "Import/Export Properties…" from the dropdown menu, TastStand return the error.
Thank
Are -
Import specific schema from exported full database dump...
In my application if I take backup expdp using full=y and during impdp if I want some specific schemas only then it will fine? or It recommended to specify full=y also in impdp.
suggest me..In my application if I take backup expdp using full=y and during impdp if I want some specific schemas only then it will fine? or It recommended to specify full=y also in impdp.
Hi,
Yes it is fine.
you have three option.
1. full
2. schema level
3. table level
it is up to you how you want to import your database.
please refer: http://tahiti.oracle.com === import/export chapter
Regards,
Taj -
Full list of schemas not exported / imported when FULL=Y
Hi Guys,
Verison: 10.2.0.5
Can advise on the full list of schemas not exported / imported when FULL=Y?
thanks!dbaing wrote:
Hi Guys,
Verison: 10.2.0.5
Can advise on the full list of schemas not exported / imported when FULL=Y?
thanks!System schemas. Please see the following:
http://docs.oracle.com/cd/B19306_01/server.102/b14215/dp_export.htm#i1006790
http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_export.htm#i1006790
You may also be interested in the following:
-How to Perform A Full Database Export Import During Upgrade, Migrate, Copy Or Move Of A Database [ID 286775.1]
-Oracle DataPump Quick Start [ID 413965.1]
-How To move Or Copy A Database Using DataPump [ID 855268.1] -
Hi,
I'm facing a problem with import/export xls files.
Once I selected the file the system doesn't return any response even if the file has very small size (about 70 KB).
It happens both from workbench and web.
Furthermore I can't to export something to Excel (I.e. the categories)
Any suggestion about it?
Thank youImport XLS:
Make sure the ups* range in your XLS workbook is defined to include all rows you want to import, including the two header rows.
Please also be aware that XLS Import only adds records and does not update/overwrite what's already in there. If you want to change mappings/periods etc., you need to delete these records first and then add them again.
Export to XLS:
Your settings for export sound ok. Maybe there's an issue with the MIME Types on the web server - but I'm not too familiar with that, maybe someone else has an idea on this.
If you export to XLS a file should be created in Outbox\Excel (not during import, just want to make sure I'm clear on this).
Regards,
Matt -
How to import/export in Pl/SQL ?
Hello
I want to write a procedure in PL/SQL which will be copying one user's schema to another.
I have Oracle 9i on Windows 2000.
My first idea was to use IMP EXP commands, but i need to execute this commands from PL/SQL procedure. How can I do this, except from writing Java procedure using Runtime class - I've done it, it works, but sometimes occure an critical error in Oracle Kernel, and I'm sure that Java code is ok.
Or maybe there is much easier way to solve such a problem (PL/SQL interface for import/export or something)?
Thanks for any hints.No, imp/exp are standalone utilities with no PL/SQL API. Java would be the way to do it.
-
hi
hi please could you help me in how to import/export from d2k.
M.P.Kiran KumarFUNCTION open_ldr RETURN varchar2 IS
out_file Text_io.File_Type;
v_filename varchar2(255);
Begin
out_file := Text_IO.Fopen('C:sqlldr.ini', 'R'); /* create a file so that u can store sqlldr path first time it wont be there so write the path after verifying */
text_io.get_line(out_file,v_filename);
--message(v_filename);
return(v_filename);
Exception when others then
--message('Check For Sqlldr73.exe or Sqlldr*.exe');
v_filename := get_file_name(File_Filter=>'sqlldr Files (*.exe)|*.exe|');
out_file := Text_IO.Fopen('C:\sqlldr.ini', 'W');
Text_IO.Put(out_file,v_filename);
Text_IO.Fclose (out_file);
if v_filename is null then
Message('Please Select The Sqlldr Path ');
Message('Please Select The Sqlldr Path ');
raise form_trigger_failure;
end if;
return(v_filename);
End;
Declare
The_userid varchar2(100):='';
The_Password varchar2(100):='';
The_connectstring varchar2(100):='';
Con_Info varchar2(100):='';
the_command varchar2(200):='';
v_filename varchar2(100);
cursor c1 is select tname from <table_name > /* create a table in ur schema and put all the tables which u want to export */ where tabtype = 'MASTER';
Begin
v_filename:=open_ldr;
The_userid := Get_Application_Property(UserName);
The_Password := Get_Application_Property(Password);
The_connectstring := Get_Application_Property(Connect_String);
Con_Info := The_userid||'/'||The_Password||'@'||The_connectstring;
for c1rec in c1 loop
C2K_TRUNC_HLL_MASTERS(c1rec.tname);
the_command := v_filename||' Control=c:\'||c1rec.tname||'.ctl userid='||Con_Info; -- Change This According To The Path
-- message(the_command);message(the_command);
Host(the_command);
End Loop;
the_command := v_filename||' Control=c:\control'||'.ctl userid='||Con_Info; -- Change This According To The Path
host(the_command);
Exception When Others Then
Message('Error'||' '||sqlerrm);
Message('Error'||' '||sqlerrm);
End;
If u have any problems please contact me on [email protected]
furnish the details properly .
Maybe you are looking for
-
How do I unlock all files in site at once
Have a site that someone else worked built. Most of my sites are GoLive, so easy to figure. All pages and files are locked. I am only one working on the site now. Sort of figured out how to unlock a file, but still confused by the page unlock process
-
When a vi hangs...how do I find out what it is waiting for?
I have a vi. It is "waiting for front panel activity". I cause some front panel activity by pressing a control...and the vi functions. I then press the same button again and the vi hangs, the front panel does not respond to any mouse activity. Wh
-
ipad not connected to computer. erreo number (0xE8000084)
-
Hi everyone! I've created a function and I've published it like web service... Now, i see the WS in SE80 (Service Definition --> WSDL tab) and i get URL and WSDL (by example: http://hostname:8000/sap/bc/srt/wsdl/sdef_ZFUNCTIO_001/wsdl11/ws_policy/doc
-
Process Scheduler Report Success Event
Does the Process Scheduler fire an event once a report has been generated? I want to run an automated function every time a report has been generated. My initial thought was that I could loop a sql query that checks the status of the report, but I ca