Errors processing after adding Computed Column to Time.

Errors in the high-level relational engine. The 'Time' table is based on a named query, and contains one or more computed columns. A table based on a named query cannot contain computed columns. If the computed columns are necessary, add them to the query
expression.
Help me, pls! Thanks!

Hi CUONGNV0207,
According to your description, you get this error when processing cube. Right?
As the error message mentioned, a table based on a named query cannot contain computed columns. If you create a computed column in this table, it will throw this error. In this scenario, please go to the DSV and check if that table is set up with named query.
You can replace it with a DimTable in your database.
Reference:
cryptic error when processing cube
Errors processing after adding Computed
Column to Time
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Similar Messages

  • Unexpected error durung process after adding a new measure group

    I add a new measure group with distinct count in my cube
    I process my cube then I have:
    Erreur interne : Une erreur inattendue s'est produite. Erreurs dans le moteur de stockage OLAP : Une erreur s'est produite lors du traitement de la partition 'Requirement' du groupe de mesures 'Formalized 1' pour le cube 'Requirements_view' à partir de la
    base de données SeikoCube. (internal error : unexpected error happens ... An error occured when processing the partition for measure group for the cube)
    If I delete this measure, it works well.
    Whap happens ? How could I resolve it ?
    Thanks in advance

    Hi Fiacre663,
    According to your description, you encounter the error while processing the cube after added the distinct count to cube, right? In your scenario, which process option are you used to process the cube?
    Generally, if you add a measure you are changing the structure of the cube which will invalidate the cube, the easiest way to get the cube "fully operational" again would be to do a ProcessFull. The same thing applies when removing a measure.
    Besides, please ensure that the steps to add distinct count are correct. There are different options for creating a distinct count measure in SSAS. Please refer to the link below to see the details.
    http://www.mssqltips.com/sqlservertip/3043/different-options-for-creating-a-distinct-count-measure-in-ssas/
    Regards,
    Charlie Liao
    TechNet Community Support

  • Found errors in existing report after added a column in an existing table

    Hi,
    I have a Table called "EMP" and a interactive report "EMP_Details".
    EMP table has data and it shows in the report.
    EMP_Details report has two buttons. - 1.Create - it is used while inserting a new record into the table for a new joinee
    2. Get_Info - it is used in case you want to know about an employee(there is a drop down to select the name os a employee) in details.
    Till now the report was working fine.
    Now What I did...
    1. I did some edit in the values in the EMP table.
    2. I added a new column in the Table and put some value in each row. Now the table was changed and the new values and column was reflected in the table.
    3. so accordingly, I added the new column in the "Process" used for inserting a new record into the table and i selected the new column from the "Select column list" for showing it in the report.
    Now what happened to report
    1. I am getting the report for the old employees but what i made changes in the table.. it has not been reflected in the report.
    2. The new column is shown in the report but the values I have put in the table have not shown in the report.
    3. While inserting the data for a new joinee, the value can not be inserted into the table at all.
    Appreciate, If anyone understands my issues and give any solution.
    Thanks in advance.
    Kuldip

    Kuldip:
    Sounds like you may have forgotten to 'Commit' your changes to the database . Go to the session where you edited the values of the EMP table and execute a 'commit'.
    varad

  • Photoshop cs5 error 52 after restart computer

    Every time after restart my computer (mac book pro 2011) and start PS CS5 (12.04x64) i see error...so I need to delete photoshop preferences and it goes OK, until i restart my computer again.
    here is from pserrorlog.txt
    2011:07:08 16:24:06 : /Volumes/workarea/PS_12_Mac_Daily_Retail/20110407.r.1265/photoshop/main/photoshop/xcode/. ./sources/PSOWLListenerProxyBaseCocoa.mm : 52 : REQUIRE failed
    Can you help me to stop this errors?)

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • Airport extreme connection problem after adding computer to network

    just added new imac to my network and for some reason my older imac {dome desktop} seems to have stopped recognizing the AEBS. the older imac was hooked up to the AEBS by ethernet and when i moved it across the room it fails to read the AEBS. I had installed the airport card a few mos ago and i know it worked...although most recently was ethernet connected. I cannot be certain the new computer addition is even related but seems to be. Have checked all the airport utility settings and see no issues. I did fool around with some network sharing features on the imacs so ? if that can create issue sharing the AEBS. Interestingly the affected imac does detect the AEBS in the utility app but times out when attempting to connect. also think i may have done recent AEBS download upgrade and see threads related to that as poss issue . have reverted back to older AEBS software without success. new ibook and new imac detect/connect without problem. Any thoughts out there??? thx for any help.

    Is your AEBS configured to create an 802.11g compatible network? It must be for the iMac G4 to connect.
    What channel is the AEBS configured to use?
    If the AirPort Extreme card in your iMac G4 is from the US it can only use the channels between 1 and 11. If your AEBS is from somewhere else in the world it can use other channels which are not available for use with equipment from the US.
    If your AEBS is not using a channel between 1 and 11, change it and see if your iMac G4 can connect.

  • After adding one column in a table can't get the header line

    hi all,
    i have make a SMART FORM which was working perfectly.Now the requirement of user is to add one column in my table at smart form which i did and after modification i execute it it give me data as well but issue which i'm facing is that the TABLE at smart forms in which i have add one field is not displaying the HEADER LINE which i have define with SELECT PATTREN option.
    Thanks & Regards,
    sappk25

    Hi,
    Have you created the Header Text? If yes, then might be the case that your smartforms
    table which was already created is with Multiple Line. Check weather you have added
    customer field in Header Line or Not?
    Regards,
    SUjeet

  • Dump when selecting SoS after adding new column in SoS tab in SRM7.0 SC

    Hi Experts,
    We are using Classic Scenario with ECC6.04.
    We added 2 extra column  ( Plant & Sto Loc) in the Source of Supply Tab in the SRM Shopping Cart.
    I added these fields in webdynpro/SAPSRM/WDC_DODC_SC_I_SOS in the view V_DODC_SC_I_SOS
    Appended these two field in the structure /SAPSRM/S_PDO_APP_SOS_VEN  and added the logic to get plant and storage location
    in WDDOINIT method.
    When system proposes any B/E SoS ( Contract or PIR) it shows value of Plant or Sto Location from respective SoS in the respective Column correctly.
    But when we select any Contract or PIR row other than 1st , then system throws below dump
    100209
    sgsgsav0s2003
    https://sgsgsav0s2003.ad.internal:44300/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif
    GETWA_NOT_ASSIGNED
    Field symbol has not yet been assigned.
    Method: UPDATE_META_DATA of program /SAPSRM/CL_CH_WD_MAP_META_HDLRCP
    Method: /SAPSRM/IF_CLL_DODM_SC_I_SOS~LEAD_SELECTION of program /SAPSRM/CL_CH_WD_DODM_SC_I_SOSCP
    Method: ONACTIONLEAD_SELECTION of program /1BCWDY/T2R7E4WKA5D7C8DML3PR==CP
    Method: ONACTIONLEAD_SELECTION of program /1BCWDY/T2R7E4WKA5D7C8DML3PR==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/T2R7E4WKA5D7C8DML3PR==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
    Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
    Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
    Please suggest the solution whether I am missing anything .
    Thanks and Regards,
    Rama.

    Dear Rama
    This error usally happens when you call an ITS transaction through SRM portal using SRM 7.0, which is based on Web Dynpro. This is a common error regarding customer fields and upgrade from SRM 5.0 to SRM 7.0.
    It can also be a role issue. For example, the user that is getting the dump has an old role (SRM 5.0) assigned to him instead of a new role (SRM 7.0).
    I hope this helps.
    Best regards,
    Christian Zeuch

  • GetAuthenticationInfo error publishing after adding new code signing certificate

    I updated the certificate in the publishing wizard to use a new certificate (from GoDaddy) for my desktop app.
    I checked "Specify a certificate" and selected my code signing PFX.  I clicked "View Certificate" and the correct info came up.
    The app built and seemed to publish okay.
    Now when I publish my desktop app I just get a white screen.
    I used Fiddler to get this info that is generated when trying to start the app:
    Error in '/' Application
    The resource cannot be found.
    The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
    Requested URL: /client/Web/Microsoft-LightSwitch-Security-ServerGenerated-Implementation-AuthenticationService.svc/binary/GetAuthenticationInfo
    Any ideas would be greatly appreciated.
    Thanks,
    Mark

    Error in '/' Application
    The resource cannot be found.
    The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
    Requested URL: /client/Web/Microsoft-LightSwitch-Security-ServerGenerated-Implementation-AuthenticationService.svc/binary/GetAuthenticationInfo
    Hi Mark,
    A signed XAP file is required for an application that is hosted on Microsoft Azure. Please check whether you add your certificate properly.
    You can add a certificate from the certificate store on your computer or from a network location that the network administrator provides.
    To add a certificate
    1.In the LightSwitch Publish Application Wizard, go to the
    Security Settings page, choose the Digital Signature tab, and then choose
    Browse.
    2.In the Select File dialog box, browse to the location of the certificate that you want to use, and then choose the
    Open button.
    Basic information about the certificate appears. You can choose the View Certificate button to display more information about the certificate.
    Best regards,
    Angie
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Retain Modified Date after adding a column

    I have a sharepoint list that has been in use for some time.  
    There are reports generated bases on "last modified"  
    As the site admin, I need to add a column to the list and then enter some values into the new columns. 
    But this changes all of the modified dates.  
    Any was to preserve this date? 

    If you are able to update the list items using PowerShell, you can use the SPListItem.SystemUpdate(false) method.
    This will update the list item without changing the modified date / modified by information, and without creating a new version.
    See: https://msdn.microsoft.com/en-us/library/office/Microsoft.SharePoint.SPListItem.SystemUpdate.aspx
    Regards, Matthew
    MCPD | MCITP
    My Blog
    View
    Matthew Yarlett's profile
    See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
    Upload and Crop User Profile Photos

  • TS1717 Itunes Error -42404 After Cleaning Computer

    I recently cleaned by computer using CCleaner. Now, I am getting an error message saying I need to reinstall itunes. However, I can bring up my itunes, so I know it hasn't been erased. Also, my computer is not recognizing my ipod nano. Will reinstalling itunes solve these problems? Will any of my data be most?
    It said "the software required for communicating with ipods and mobile phones was not installed correctly. Do you want itunes to try to repair this for you?" I said "Yes"
    "The software required for communicating with ipods and mobile phones could not be repaired. Please reinstall itunes if you wish to use these devices."
    Then, "A required itunes componet is not installed please repair or reinstall itunes" -42404

    Hmmm.
    Let's try something relatively simple. Download and save a copy of the installer to your hard drive (don't run the install on line and don't start the install just yet):
    http://www.apple.com/itunes/download/
    Now right-click on the iTunesSetup.exe (or iTunes64Setup.exe) that you downloaded and select "Run as administrator".
    Does that go through any better for you?

  • Trigger approval process after adding draft through DI API

    FROM SDK:
    The ApprovalTemplatesService doesn't trigger the approval process for objects that were added through the DI API
    I add a Draft document through the DI API, and the approval process doens't trigger.
    (no record added in OWDD and WDD1)
    How to make it happens ?
    Thank you

    Hello Nicola,
    Exactly what product are you using?
    What version of that product?
    I believe this question is in the incorrect forum, but I need this information to be able to point you in the right direction.
    Also in the future, do not cross post questions to multiple forums as that is against the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement]
    Jason

  • Customize sort disappeared after adding a column structure

    Hello BI experts,
    When the users want to add a hierarchy in column, the customized sort in rows is removed   (see example)
    After :
    Is there a patch to correct this issue ?
    For your information, we are in BI 4.1 SP2 patch 6.
    Regards,
    Nicolas

    Hello Ian,
    Thank you for your answer and sorry for hard copies.
    these is new one :
    The sort is not coming from BEX but made directly in analysis (by drag and drop)
    That's why you don't see sort icon.
    I tried  in Analysis for Excel but unfortunalty it's not possible to manage customized sort like in web.
    Thank you in advance for your help.
    Regards,
    Nicolas

  • Strange Error Message after Adding Apple Loops to Arrange Page

    after dragging some apple loops onto arrange page. i'm getting this error message." audio file "drone Bellos 01 .caf hasn't got sufficient access privilidges so the overview canot be saved. any ideas why this is happening?
    thanks

    Yes, some of the Apple loops are protected (Jobs knows why). You can change this by searching the file in the finder with spotlight, then hit apple+i->menue opens->click into the lock->set your permissions to "read and write"->done. Unfortunately this procedure has to be performed seperately for each protected loop.

  • Internal error 7780 after adding 5 invoices.

    Dear all,
    SAP BO 9.0 PL09HF01, SQL2012,
    When user add 4 - 5 invoices to SAP, SAP client returns error
    Internal error-7780 message 131-1883
    and user have to close SAP client.
    What can be root cause? How to solve this?
    regards
    GN

    Hello
    Please check below link
    Internal error - 7780
    Thanks & Regards
    Pankaj Jha

  • The server has encountered an error processing registration. Please try again later"

    Hello, I just got my MAC Book Pro and it I can not log into FACETIME it states " The server has encountered an error processing registration. Please try again later" now it is not due to incorrect information entered. However I also have an IPad mini and I could log unto that without any problems.. Greatly appreciate any help!

    Back up all data.
    Take the steps suggested in this support article:
    FaceTime, Game Center, Messages: "There was an error processing registration" when signing in
    The time zone must be correct for your location.
    Make sure you know your ID (an email address) and password. The password should be in your keychain, which you access in the Keychain Access application.
    Sign out of iMessage:
    Messages ▹ Preferences ▹ Accounts ▹ Sign out
    Then sign back in with your verified credentials.

Maybe you are looking for

  • Getting an unusual error while running transaction for rebate settlement

    Hi Experts , While i am running a customized transaction for vb7 that is rebate settlement , I have input field on agreement screen of payment method . Whenever , i put any value in that field and run the transaction , it gives me an error " Input va

  • How do you display Roles?

    In the old Enterprise Console, it was possible to display Roles, and see what privileges had been granted to each, and what users had been linked to an individual role. Is it possible to do something similar in SQL Developer? I can write my own queri

  • About the required Field in XDD

    Hi All, I am getting one issue, like even in XML input as "son of" im getting the print like "Son Of". How these lower case letters or converting to Upper case? I have cheked the field level properties and XDD. I got only one difference i.e in XDD re

  • How to retrieve data from cluster

    Hi,     Can any body tell how to get the basic salary of an employee  using cluster.      I am doing a EPF/ETF calculation in which I need to get the basic salary of the employee for a particular month.I am new to HR abap.Kindly provide some sample c

  • Need help in Oracle reports 6i

    I have a report in 6i, which displays participant details as output on a single page. Presently page one is printed on a pre-printed format which contains some static text. Now we need to make changes in the report it self to accomodate the static te