Errror when in SC ( Incorrect status in pricing )
Hi Experts,
Please advice what I done wrong in customization. I'm configuring system to Classic scenario.
When i try to add items to shopping cart I'm getting the following error. Pls advice me what settings i have to done for the below problem.
Thanks and regards
Hardhik.
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_BBP_PD_ABORT
Date and Time 06.01.2002 17:00:54
Short dump has not been completely stored (too big)
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_BBP_PD_ABORT' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLBBP_PDH' has to be
terminated.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_BBP_PD_ABORT', was not caught and
therefore caused a runtime error.
The reason for the exception is:
Incorrect status in pricing
Missing Handling of Application Exception
Program SAPLBBP_SC_UI_ITS
Trigger Location of Exception
Program SAPLBBP_PDH
Include LBBP_PDHU08
Row 73
Module type (FUNCTION)
11
Normally, this dump happens when BBP_CND_CHECK_CUST transaction is
carried out and there is an IPC (Internet Pricing Configuration )
incident.
In this case, you have to pay atention in the following details:
Have you attempted restarting the IPC? Are you using the correct
version (note 533877)? Is the IPC active ? Is IPC running in VMC (
Virtual Machine Container) ?
Otherwise, the reason could be that the VMC installation have been
corrupted:
I.e: certain files were missed in the installation. Therefore pricing,
and consequently shopping cart creation fails.
For a quick solution I propose to apply the latest AP 7.00 pricing
patch from service marketplace (please follow note 880749 how to apply
an AP patch). As a patch is always a full installation of all required
Java parts, pricing should work fine afterwards.
Additional notes to take a look:
673372 - explains about the Short dumps UNCAUGHT_EXCEPTION in SRM 3.0,
4.0, and 5.0
Regards,
Daniel
- if helped please give points -
Similar Messages
-
Incorrect Status in Pricing issue_short dump
Hi,
All of sudden when we create sc non catalog, its giving short dump. Its uncaught exception ie Its CX_BBP_PD_ABORT exception..only error message that i found relevant is " incorrect status in pricing".. I checked IPC and its active and running..
I did manual check for IPC (simulation of pricing using manual check) and it gave the same "incorrect status in pricing"
Did anybody came across this issue.. Is this something to do with UOM's? I was able to create catalog sc and internal goods/services based sc...only non-catalog sc is giving short dump..
I searched couple of notes and couldn't hit the right one and i dont want to activate simplified pricing so that we can avoid IPC altogether.
Appreciate any hits/clues..
Thanks
KrishHi Robin,
Thanks for reply. We are on SRM Server 5.5.
I am wondering if this error is something to do with any missing UOM's in SRM. I see one message in these short dumps..
"ST" physical unit not available"..
Already checked 781669 note..but it seems this is old note and not applicable..as we are already on SAPKIBKT11 patch level.
Raised OSS and waiting for reply.
Thanks
Krish -
Dump in production system :Incorrect status in pricing
Hi All,
We have patched out SRM5.5 server system recently with 15 and 16 patch.
After the patch we are getting many dums in production system.
When i check in the ST22 ,the error syaing that
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_BBP_PD_ABORT', was not caught and
therefore caused a runtime error.
The reason for the exception is:
*Incorrect status in pricing*
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_BBP_PD_ABORT"
"SAPLBBP_PDH" or "LBBP_PDHU08"
"BBP_PD_ABORT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
and i have checked the IPC ,it is also active only,.
We have got his issue all of suddenlly,
Can any one tell us what could be the issue.
Regards
cbHi All,
thanks a lot for your response ,
I have done the Simulation which shows everything is fine and i have chcked with BBP_CND_CUSTOMIZING_CHECK t-codes even that is also correct only .
we are plannning for rasing the issue with SAP.
Besides that the system might have activated the BADI simple pricing active (or something like that). This would give trouble as well with the IPC (they can't both be active).
@Robin which the badi we can check.
once agina thanks a lot for your replys.
Regards
cb -
Incorrect status in pricing in process SC.
Hi masters.
the vesion SRM 7.0 was updated the version SP5 to SP8 of ABAP and other components like java. after that changes the sistems was Ok. but now no working when try make sc since catalog or free text the sistem show a dump Incorrect status in pricing.
ran the transaction bbp_cnd_check_cust
and no show problem since catalog price simulation or manual price simulation.
some idea what happening.
thanks.
Edited by: Oscar vazquez on Nov 26, 2010 7:33 PMHello,
I have seen this issue solved after executing the following procedures:
- Restart the VMC;
- Update to the latest AP pricing patch.
Kind regards
Ricardo -
Error message "incorrect status in pricing"
When creating a shopping cart based on free text, the system aborts with the above mentioned message and "The termination type was: RABAX_STATE" . We can not find the problem. When we run BBP_CND_CUSTOMIZING_CHECK, we get the same error message when we simulate manual pricing. We can however create a shopping cart based on product. When we run RSVMCRT_HEALTH_CHECK we get 4 green lights, so the basis installation seems correct. If you have any suggestions, please let me know.
Ed Muhlradt
IFFHi
<b>What is the error dump details in ST22 Transaction ? Please paste the same here.</b>
Other related points to check ->
Please check the unit of Measures are correctly maintained in the T006 table.
The problem can be solved by implementing a program correction from the following note :
781669: Correction of BBP_CND_CUSTOMIZING_CHECK
Please refer to following SAP Notes:
Note 860935 - pricing customizing exits are missing
Note 673372 - Short dumps UNCAUGHT_EXCEPTION in SRM 3.0, 4.0, and 5.0
Note 1024374 - Unexpected pricing error for pricing irrelevant item
Note 992259 - NullPointerException in Command GetFilteredCsticsAndValues
Note 860935 - pricing customizing exits are missing
Note 673372 - Short dumps UNCAUGHT_EXCEPTION in SRM 3.0, 4.0, and 5.0
Note 854170 - Activating the component "VM Container"
Note 593109 - Short dumps UNCAUGHT_EXCEPTION in SRM 2.0 (EBP 3.5)
Note 880749 - Patching of VMC based AP 7.00 engines
Note 854170 - Activating the component "VM Container"
Note 844816 - Information for Upgrade from IPC 4.0 to SAP AP 7.00
Note 854170
Note 844817
There must be some problem with VMC. Most probably java connection problem.
Pl run program RSVMCRT_HEALTH_CHECK in SE38. You should see green for all 4 messages in the result. Try implementing the latest IPC patches following the instructions from note 880749, then restart the VMC.
Please do the following steps.
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (TA SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.
[/code]
Hope it helps.
Please reward full points, incase it suits your requirements.
Incase it does not help, please raise an OSS message with SAP.
Regards
- Atul -
Hi experts,
we are on srm7.02 classic scenario,dump occurs when creating shopping cart.
regards,
srinivashi ,
Srinivas
if the SC type is free text, then Maintain "ST" dimension, this is mandatory if you want to procure free text item using shopping cart
to activate the simple pricing follow the note 1359426
Regards,
kiran -
Incorrect status in FM report for paid invoices
hello,
I'm working in ECC 6.0 with Former budgeting.
I have several invoices which are created in 2008 but paid in 2009 or in 2010. There are then different fiscal year impacted.
When the invoices are paid, they don't have the value type Payment - Amount type Paid in FM report (FMRP_RFFMEP1AX - All Postings). The invoices still have the status Invoices Original.
As the invoices dont have the status Paid, they are carryforwarded to the next year.
How can I correct that?
When I use the transaction FMF0, the invoices are updated with the current year (2011) in FM report.
And this is not correct.
Is there any customizing to avoid the incorrect status of paid invoices in FM report?
Thank you for your help,
Kind regards,
ChiachenHello Chiachen
Please, check your settings in t-code OF29: do you have the flag 'Deactivate check on fiscal year change' On? if you have this flag marked, this could be a reason why you are facing this issue.
You can find good information in the F1 help of such field.
In addition, please review note[400924 Recommendations and rules for the payment transfer in FM|https://service.sap.com/sap/support/notes/400924]
cheers
Mar -
There are IDocs with incorrect status.How to rectify it?
Hi All,
I was trying to do full load for 0vendor_attr.
The error message is getting displayed as mentioned below:
" Error when updating Idocs in Source System*
Diagnosis
Errors have been reported in Source System during IDoc update:
Incomplete control parameter for commmunication wi
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Source System . You can get here using the BW Monitor.
Removing errors:
*How you remove the errors depends on the error message you receive." *
Please revert.The Error messages in detail:
Incomplete control parameter for commmunication with the BW system
Diagnosis
The control parameters for communication with the BW server are not
complete. A BW PlugIn upgrade could be the cause of the problem.
System response
Procedure
Depending on the Release of the BW server, proceed as follows:
BW Server Release 1.2B: Source system: Update InfoSource metadata
BW Server Release >= 2.0A: Source system: Activate
Please revert at the earliest what needs to be done int his case. -
Posting run cannot be posted Incorrect status
Hi,
we are running transaction for Posting to Accounting : Create Posting Run.
For many employees the posting was done properly but few says No Document Created. and the error
Posting run cannot be posted : Incorrect Status is flashed.
Please shed some light on this... What should be the error?Hi,
when u run the tcode for posting
- enter Payroll area
- Give" S" in "" Type of document creation""
- Enter the posting variant
Execute
- If you get the error in initial screen
click on the red button -
u'll get a message.
doubleclik and you'll get the details of the error.
Else
-Goto Document Overview
Double click on the line
- Go to the bottom of the document and you can read the error.
Double click on red button anu u'll get the detail.
Hope this helps.
Regards,
Param -
why is it when i update my status on facebook from iphone it splits the updates into two differents boxes with some funky symbols at the beginning.. I have uninstall facebook and installed it over and it still does it. only the facebook IPHONE app where it says to update staus text to FBOOK i have already update my phone too.
if i go on the facebook site and update there through a brower on iphone it will work fine just cant us IPHONE mobile upload, . But its a pain of not using my IPHONE APP for facebook cause it does that.The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days? I tried asking in a chat window instead of the forum but no one answered and after about ten minutes my screen restarted and closed the chat window down. It seems a little frustrating not knowing what happened to my order and not being able to contact anyone. Is all this usual with Adobe or are they just having technical problems this week?
Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
How to trigger a workflow notification when DESADV reaches a status 51.
Hi,
A notification to the a user should be sent when DESADV goes to a error status 51.
I'm in SAP6.0 :
Basic type: DELVRY05
Message type: DESADV
Idoc: IDOCDESADV
Event: inputErrorOccurred
Task to be linked for the event : TS00008178
In SWETYPV the event is active, still this event is not getting triggered when the Idoc goes to 51 status.
What am I missing? Is there any configurations that I'm missing?
Can anyone please help me to fix this?
Thank you,
RenuRenu,
Event "inputErrorOccurred" is still not getting triggered....
For this event there are many parameters, Do you think this may be the reason?
I DO NOT THINK SO.
In IDOCDESADV business object, I put a break point in the method INPUTFOREGROUND. When I tried to execute this I will get the required output but the control doesn't stop at the break point.
YOU'RE TRYING TO EXECUTE THE METHOD BUT THE ISSUE IS EVENT NOT RAISED WHEN IDOC ERRORS OUT(STATUS - 51).
Please try this and let me know.
Try to put a break point in the IDOC function module
and create the error IDOC using WE19.
Your function module should populate the workflow related parameters in the IDOC funtion module.
Thanks -
What happens during an iphone 5 processing order, i ordred mine 1 week ago and when i check the status it says processing order
Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
URGENT : Error 5 when checking the job status
Hello Forum,
While monitoring the Process Chains in BW 3.1, I got the following message in the <b>Information </b>Pop-up:
<b>Error 5 when checking the job status</b>
Could you please tell me what it means?
Thank you,
its my duty to assign points,
rajHi,
Are you able to view the log after refreshing and clicking the tick mark button on this message or is it not letting you go into the log itself.
Can you directly go to Log view thru Tcode RSPCM and see. Once you are inside try to find where exactly the process failed.
Thanks,
JituK -
Oracle contracts generating incorrect start dates/pricing
Hi,
Oracle contracts generating incorrect start dates/pricing
Semi Annual Invoices being automatically generated with the incorrect start date/pricing.
We have 8 years of pricing instead of 6 yrs. Contracts are being terminated and recreated to correct immediate billing issues.
Please help me out Why Oracle contracts generating incorrect start dates/pricing.
Thanks In Advance,Which Apps release is this happening in?
Maybe you are looking for
-
Share one iTunes library on a SMB share between PC & Mac
Hi, Is there anyway I can share one iTunes library and the music files on a SMB share between a PC and a Mac? I assume there would be a problem with how the Mac and PC assign network drives differently would be an issue, or is there a way around this
-
Hi , I have a table where there are 2 fields Country and code. I imported data with a remote system rs2. 'edit key mapping window' values 'FOR rs2' are name remote system key india RS2 IIA india RS2 IA "CHECKED" In record pane there is one record. na
-
Help!!!! jsp deletion issues
hi i have made a table using jsp to show the contents of a table from a database in a tabular format. the table rows have two options edit and delete. edit will show all the data in textboxes. this some how works. delete option is giving one bug and
-
CME B-ACD on Cisco 2911 with IOS 15.2(4)M5 not working
Hi Folks, I am currently setting up CME version 9.1 with B-ACD (app-b-acd-aa-3.0.0.2.tcl & app-b-acd-3.0.0.2.tcl), running on Cisco 2911 with IOS ver 15.2(4)M5, this is for lab purposes. Below is my CME & B-ACD configuration : voice service voip ip a
-
Essbase server not starting 11.1.2.1
Hello all, I am trying to start Essbase from command prompt & it's not getting started it gives me following: D:\Oracle\Middleware\user_projects\epmsystem1\bin>startEssbase Sat 04/30/2011 10:38 PM Starting Essbase.properties A subdirectory or file D: