Errror while uploading the supplier catalog data

Hi CCM gurus,
I am trying to upload a supplier catalog via csv file and got this error:
" Value for catalog item xxxxxxx (supplier part no.) of supplier xxxxxx is incorrect"
"Catalog update was terminated  "
I tried to the change the values of /ccm/supplier_part_no but this error exists.
I even tried to remove this column and upload but it says there is an error in the fourth row of your csv file.
I am missing something in the supplier part no column.
My SLG1 shows the following error /CCM/CX_CONVERSION_FAILED
Any suggestions.
We are working with CCM 2.0 patch level 0001
SRM server 5.0, component version 4.0 and we have TREX installed in our system.
Reg.,
Sridhar.

Yes. Pl. find here, the XXXXXX place we have our catalog name,suppartno and all
Log Details: 00000000000000000669
Uploading catalog XXXXXXXX 
  Name of file that was uploaded: XXXXXXXXXXXXXXXXXXXXX 
  03.04.2007 15:48:43 (CET) X: Starting CSV import for catalog XXXXXXXXXX 
  03.04.2007 15:48:44 (CET) X: 0001 package(s) were processed OK 
  03.04.2007 15:48:43 (CET) X: Package 0001 received and saved 
  03.04.2007 15:48:53 (CET) X: processing of package 0001 started 
  03.04.2007 15:48:55 (CET) X: catalog header data updated 
  03.04.2007 15:49:06 (CET) X: 1 data types updated/created 
  03.04.2007 15:49:08 (CET) X: characteristics updated; 2 updated/created; 0 deleted 
  03.04.2007 15:49:09 (CET) X: categories updated; 3 updated/created; 0 deleted 
  03.04.2007 15:49:09 (CET) X: category relationships updated; 2 created; 0 deleted 
  03.04.2007 15:49:09 (CET) X: schemas updated; 1 updated/created; 0 deleted 
  03.04.2007 15:49:10 (CET) X: 1 schema(s) deleted after complete transmission 
  03.04.2007 15:49:10 (CET) X: update of catalog data started 
  03.04.2007 15:49:10: 0 catalog items have to be adjusted 
  03.04.2007 15:49:10 (CET) X: update of catalog data completed 
  03.04.2007 15:49:10 (CET) X: catalog model data updated 
Value for catalog item XXXXXX (supplier part no.) of supplier XXXXXX is incorrect 
  Catalog update was terminated 
Only the last two lines shows red and all others are green.
Reg.,
Sridhar.
Message was edited by:
        P.T. Sridharbabu

Similar Messages

  • *Journal Entries while uploading the vendor master data from legacy system*

    hi SAP Folks,
    can any one of you tell me the journal entries while uploading the vendor master data from legacy system to SAP system.
    Eg: legacy system is having 10000 vendors list, 1 reconciliation account and $ 1000000. while uploading all these data from legacy system to SAP what are the journal entries we get.
    thanks in advance.
    Edited by: ravindranath manikonda on Nov 24, 2008 1:12 PM

    Hi
    you will be having  only one entry logically
    i.e. Opening Bal. clrng A/c Dr.
           To Vendor A/c Cr.
    regards

  • Error while uploading the data using FM"upload"

    Hi,
    I encountering an error while uploading the data using text file with FM " UPLOAD"
    The error is "File does not exist or cannot be opened "
    But there is a file with name and extenstion right.
    Regards
    Vishnu

    You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
    DATA: new_mark TYPE bdcdata-fnam.
    CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
    PERFORM bdc_field USING new_mark W_BOM-QTY

  • Dump While uploading the data in RSA1 from R3 system

    Hi All,
    We are getting a dump in st22 while uploading the data in RSA1,pls find the details below-:
    Error analysis
        Short text of error message:
        Password logon no longer possible - too many faile d attempts
        Long text of error message:
        Technical information about the message:
        Message class....... "RSAR"
        Number.............. 051
        Variable 1.......... "Password logon no longer possible - too many faile"
        Variable 2.......... "d attempts"
        Variable 3.......... " "
        Variable 4.......... " "
    How to correct the error
        Probably the only way to eliminate the error is to correct the program.
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "MESSAGE_TYPE_X" " "
        "SAPLRSSM" or "LRSSMU17"
        "RSSM_CALL_RSAR_DATA_REQUEST_1"
    I have checked both R3 and BI system there is no user which is currently locked.
    also I have checked the SAP Notes 1088927,1066180 ,these notes recommends to upgrade the SAP_BW component to 16 level but we are already running at 18.
    Pls suggest
    Regards,
    Prashant

    Hi Prashant
    Your system user is unable to authenticate access on the remote system. This may be an issue for RFC user locking. Check the RFC from SM59 for the commection between the two systems. Check for the User ID and password that is saved on the RFC logon.
    Also check the system user ALEREMOTE.
    I hope this helps
    Regards
    Chen

  • Can the case be changed while uploading the data or after uploading ????

    hi all ,
    can u pls help me ???  can the case of the data in a itab be changed while running the program? the data is uploaded to an internal table and then based on loop at that itab the conditions will evaluate to give the result.... but the problem is like wen the data is given in small letters the worste(last)  condition is executing even the data satisfies the condtion which is not supposed to happen. this is due to case sensitive problem ...can u pls help me ....can the case be changed while uploading the data r after uploading ????

    this is the itab declaration ..
    data: begin of it_input occurs 0 ,
           tra          like tstc-tcode,
         end of it_input.
    and then from the uploaded data the prog should check wheather it is having any userexits or not ...
    here comes the code...
    sort it_input by tra.
    delete adjacent duplicates from it_input  .
    loop at it_input.
               it_itab-sno = sy-tabix.
      select single * from tstc where tcode eq it_input-tra.
    if sy-subrc eq 0.
        select single devclass from tadir into v_devclass
                 where pgmid = 'R3TR'
                        and object = 'PROG'
                        and obj_name = tstc-pgmna.
             if sy-subrc ne 0.
             select single * from trdir where name = tstc-pgmna.
             if trdir-subc eq 'F'.
                select single * from tfdir where pname = tstc-pgmna.
                select single * from enlfdir where funcname =
                tfdir-funcname.
                select single * from tadir where pgmid = 'R3TR'
                                   and object = 'FUGR'
                                   and obj_name eq enlfdir-area.
             move : tadir-devclass to v_devclass.
              endif.
           endif.
           select * from tadir into table jtab
                         where pgmid = 'R3TR'
                           and object = 'SMOD'
                           and devclass = v_devclass.
           if sy-subrc = 0.
            select single * from tstct where sprsl eq sy-langu and
                                            tcode eq it_input-tra.
                      if not jtab[] is initial.
               loop at jtab.
                    select single modtext from modsapt  into str
                         where sprsl = sy-langu and
                                name = jtab-obj_name.
                    it_itab-tra        = it_input-tra.
                    it_itab-i_obj_name = jtab-obj_name.
                    it_itab-i_modtext = str.
                    append it_itab.
                    str = ''.
               endloop.
              endif.
            else.
                    it_itab-tra        = it_input-tra .
                    it_itab-i_obj_name = ' '.
                    it_itab-i_modtext = 'No user Exit exists'.
                     append it_itab.
            endif.
          else.
                    it_itab-tra        = it_input-tra .
                    it_itab-i_obj_name = ' '.
                    it_itab-i_modtext = 'Transaction Code Does Not Exist'.
                     append it_itab.
          endif.
    endloop.

  • Error while uploading cost element planning data into KP06 transaction

    Hi,
    I am facing the below error while uploading the Cost Element Planning excel file in KP06 transaction code. Please help me in fix this issue.
    We are trying to enter a budget upload using Transaction code: KP06. We get the following message errors  when we do this. It seems revenue accounts cannot be entered using cost centers. Question, how should these accounts be added? Kindly help me how to add Revenue cost elements to this planning?
    Error accured when generating data for the planning processor
    Messange no.K9400
    Revenue element 451000 can not be planned on cost center 9720
    Thanks
    Kishore

    The cost element which have  category 01 only can be planned in the Kp06.
    Regards
    Ranjan

  • IN SE78 : WHILE UPLOADING THE TIF FILE I AM GETTING THE ERROR

    Hi ,
    While uploading the drawing in se78 . iam getting the errror
    "erroneous tif formate"
    . PLz help me to upload the tif file  thro se78.
    even i removed the compression check box ,.
    Thanks,
    Rani

    Hi
    You can upload logo using SE78 or using program RSTXLDMC
    or by using OAER
    Steps for uploading Logo :-:
    1. Goto the transaction OAER
    2. Enter the class name as 'PICTURES'
    3. Enter the class type as 'OT'
    4. Enter the object key as the name of the logo you
    wish to give
    5. Execute
    6. Then in the new screen select Standard doc. types
    in bottom window
    Click on the Screen icon
    Now, it will ask for the file path where you have
    to upload the logo
    7. Now you can use this logo
    To create a logo in SAP printouts just do the following
    1. Save a Logo using Imaging, Paint shop Pro or Corel Draw as Tiff file.
    2. Run program RSTXLDMC and enter the following parameters
    Enter file name C:\COMPLOGO.TIF
    UOM CM
    Line width for text 132
    Text name ZHEX-MACRO-COMPLOGO
    Text ID ST
    Text language = E
    Number of Tiff gray levels (2,4,9) 2
    3. Then Create a new window 'COMP' with attributes;
    Window COMP description Company Logo
    Left margin 7.00 CH window width 10.00 CH
    Upper margin LN window height 8.00 LN
    Finally in the text element, mention
    /: INCLUDE 'ZHEX-MACRO-COMPLOGO' OBJECT TEXT ID ST LANGUAGE 'E'.
    Please note that if object name is not indicated as 'ZHEX...’ the logo may not be printed!
    You will not be able to see the logo in a test print. The same will be printed in actual printout.
    SMARTFORM
    1) In Smart Forms Editor, In left pane, right Click any Page (say Page1) and select Create -> Window, Give it a name and Description (Say Window1)
    2) Right Click on Window (Window 1) and select Create -> Graphics, Give it a name and description
    3) In general Attributes, Select Name, get search help (F4) , you will find a list of pictures
    4) Select any picture and set its Resolution in DPI
    5) Press F9 to open Smart Forms Builder, Select window (Window1) and In Output options window set, size and position of the Logo
    6) Set any other parameters if required, save and activate.
    7) If there is only 1 Window in the forms, set it as Main Window in general attributes.
    8) Use TCode SE78 to upload new pictures and logos.
    look at Thread Dynamic Graph in smartforms
    Refer the links also -
    Re: Dinamic Graph in smartforms
    How to get file perperties in Unix server
    Regards
    Selvapandian Arunachalam

  • 'Create' Push button is not working in BDC and LSMW while uploading G/L master data

    Hello Experts:
    I am facing the following problem:
    While uploading G/L master data with the BDC program, 'create' push button is not working  even after executing following lines.
    PERFORM BDC_DYNPRO      USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=ACC_CRE'.
    Create G/L account  screen is not coming in BDC. Please suggest me what to do.
    Thanks !!

    Re: 'Create' Push button is not working in BDC and LSMW while uploading G/L master data
    Re: 'Create' Push button is not working in BDC and LSMW while uploading G/L master data
    Hi Glen Anthony
    Thank you for the reply Glen Anthony please take a look at the following code.
    REPORT  ZFI_BDC_FS00
            NO STANDARD PAGE HEADING LINE-SIZE 255.
    *INCLUDE BDCRECX1.
    TYPES : BEGIN OF STR,
       BUKRS TYPE GLACCOUNT_SCREEN_KEY-BUKRS,        "Company Code
       SAKNR TYPE GLACCOUNT_SCREEN_KEY-SAKNR,        "G/L Account Number
       KTOKS TYPE GLACCOUNT_SCREEN_COA-KTOKS,        "G/L Account Group
       XPLACCT TYPE GLACCOUNT_SCREEN_COA-XPLACCT,    "P&L statement account
       XBILK TYPE GLACCOUNT_SCREEN_COA-XBILK,        "Indicator: Account is a balance sheet account?
       TXT20_ML TYPE GLACCOUNT_SCREEN_COA-TXT20_ML,  "G/L account short text
       TXT50_ML TYPE GLACCOUNT_SCREEN_COA-TXT50_ML,  "G/L account short text
       WAERS TYPE GLACCOUNT_SCREEN_CCODE-WAERS,      "Account currency
       XSALH TYPE GLACCOUNT_SCREEN_CCODE-XSALH,      "Indicator: Only Manage Balances in Local Currency
       MWSKZ TYPE GLACCOUNT_SCREEN_CCODE-MWSKZ,      "Tax Category in Account Master Record
       XMWNO TYPE GLACCOUNT_SCREEN_CCODE-XMWNO,      "Indicator: Tax code is not a required field
       MITKZ TYPE GLACCOUNT_SCREEN_CCODE-MITKZ,      "Account is reconciliation account
       XOPVW TYPE GLACCOUNT_SCREEN_CCODE-XOPVW,      "Indicator: Open item management?
       XKRES TYPE GLACCOUNT_SCREEN_CCODE-XKRES,      "Indicator: Can Line Items Be Displayed by Account?
       ZUAWA TYPE GLACCOUNT_SCREEN_CCODE-ZUAWA,      "Key for sorting according to assignment numbers
       FSTAG TYPE GLACCOUNT_SCREEN_CCODE-FSTAG,      "Field status group
       XINTB TYPE GLACCOUNT_SCREEN_CCODE-XINTB,      "Indicator: Is account only posted to automatically?
       END OF STR.
    DATA : ITAB TYPE TABLE OF STR WITH HEADER LINE,
            IT_BDCDATA TYPE TABLE OF BDCDATA WITH HEADER LINE,
            TXT(4096) TYPE C OCCURS 0,
            MSG TYPE STRING,
            COUNT(5) TYPE N.
    SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
       PARAMETERS : MY_FILE TYPE RLGRAP-FILENAME.
    SELECTION-SCREEN : END OF BLOCK B1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR MY_FILE.
    CALL FUNCTION 'F4_FILENAME'
      EXPORTING
        PROGRAM_NAME        = SYST-CPROG
        DYNPRO_NUMBER       = SYST-DYNNR
    *   FIELD_NAME          = ' '
      IMPORTING
        FILE_NAME           = MY_FILE
    CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
       EXPORTING
    *   I_FIELD_SEPERATOR          =
    *   I_LINE_HEADER              =
         I_TAB_RAW_DATA             = TXT
         I_FILENAME                 = MY_FILE
       TABLES
         I_TAB_CONVERTED_DATA       = ITAB[]
      EXCEPTIONS
        CONVERSION_FAILED          = 1
        OTHERS                     = 2
    IF SY-SUBRC <> 0.
    * IMPLEMENT SUITABLE ERROR HANDLING HERE
    ENDIF.
    START-OF-SELECTION.
    COUNT = 0.
    LOOP AT ITAB.
    *PERFORM OPEN_GROUP.
    REFRESH  IT_BDCDATA.
    PERFORM BDC_DYNPRO      USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                   'GLACCOUNT_SCREEN_KEY-BUKRS'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=ACC_CRE'.
    *PERFORM BDC_FIELD       USING 'BDC_CURSOR'
    *                              'GLACCOUNT_SCREEN_KEY-BUKRS'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_KEY-SAKNR'
                                   ITAB-SAKNR. "'5'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_KEY-BUKRS'
                                   ITAB-BUKRS. "'TATA'.
    PERFORM BDC_DYNPRO      USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=2102_GROUP'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                   'GLACCOUNT_SCREEN_COA-KTOKS'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-KTOKS'
                                   ITAB-KTOKS. "'GL'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-XPLACCT'
                                   ITAB-XPLACCT. "'X'.
    PERFORM BDC_DYNPRO      USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=2102_BS_PL'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                   'GLACCOUNT_SCREEN_COA-XBILK'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-KTOKS'
                                   ITAB-KTOKS. "'GL'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-XPLACCT'
                                   ITAB-XPLACCT. "''.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-XBILK'
                                   ITAB-XBILK. "'X'.
    PERFORM BDC_DYNPRO      USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=TAB02'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-KTOKS'
                                   ITAB-KTOKS. "'GL'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-XBILK'
                                   ITAB-XBILK. "'X'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                   'GLACCOUNT_SCREEN_COA-TXT50_ML'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-TXT20_ML'
                                   ITAB-TXT20_ML. "'G/L ACCOUNT'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_COA-TXT50_ML'
                                   ITAB-TXT50_ML. "'G/L ACCOUNT'.
    PERFORM BDC_DYNPRO      USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=TAB03'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-WAERS'
                                   ITAB-WAERS. "'INR'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-XSALH'
                                   ITAB-XSALH. "'X'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-MWSKZ'
                                   ITAB-MWSKZ. "'*'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-XMWNO'
                                   ITAB-XMWNO. "'X'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-MITKZ'
                                   ITAB-MITKZ. "''.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                   'GLACCOUNT_SCREEN_CCODE-ZUAWA'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-XOPVW'
                                   ITAB-XOPVW. "'X'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-XKRES'
                                   ITAB-XKRES. "'X'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-ZUAWA'
                                   ITAB-ZUAWA. "'1'.
    PERFORM BDC_DYNPRO      USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=SAVE'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                   'GLACCOUNT_SCREEN_CCODE-XINTB'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-FSTAG'
                                   ITAB-FSTAG. "'G019'.
    PERFORM BDC_FIELD       USING 'GLACCOUNT_SCREEN_CCODE-XINTB'
                                   ITAB-XINTB. "'X'.
    *PERFORM BDC_TRANSACTION USING 'FS00'.
    CALL TRANSACTION 'FS00' USING IT_BDCDATA MODE 'E' UPDATE 'S'.
    COUNT = COUNT + 1.
    *PERFORM CLOSE_GROUP.
    ENDLOOP.
    CONCATENATE COUNT ' RECORDS UPDATED SUCCESSFULLY' INTO MSG.
    MESSAGE MSG TYPE 'I'.
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
       CLEAR IT_BDCDATA.
       IT_BDCDATA-PROGRAM  = PROGRAM.
       IT_BDCDATA-DYNPRO   = DYNPRO.
       IT_BDCDATA-DYNBEGIN = 'X'.
       APPEND IT_BDCDATA.
    ENDFORM.
    *        INSERT FIELD                                                  *
    FORM BDC_FIELD USING FNAM FVAL.
    *  IF FVAL <> NODATA.
         CLEAR IT_BDCDATA.
         IT_BDCDATA-FNAM = FNAM.
         IT_BDCDATA-FVAL = FVAL.
         APPEND IT_BDCDATA.
    *  ENDIF.
    ENDFORM.

  • Error while uploading the file from Allpcation server in LSMW-7th step

    Hi Experts,
    what should be the specific CODE PAGE should be maintained while uploading the file from application server in LSMW-7th Step
    Thanks in advance,
    KSR

    Hi
    I mean that there is any seperate CODE PAGE which comes at the bottom of screen while uploading the file from the application server in 7th step.
    Is there any specific CODE PAGE to be maintained...
    Thanks in advance
    Oarsk

  • Issue while uploading the PAR file thru system admin- AdministrationConsole

    Hi All,
    I have downloaded the PAR file "com.sap.portal.navigation.lightdetailednavigationtree.par.bak" from system admin->support->Portal Runtime ->browse deployment->Web-Inf->deployment->PCD.
    after downloaded to the desktop for manual change in one of the JSP file rather than importing into NWDS. I have removed the bak from the file and added the .Zip to the file and i extracted the file.
    here inside i got the three folders i.e WEB-INF,PORTAL-INF and file_list. now i went to jsp file called "LightDetailedNavigationTree.JSP" , changed one small property value  in the code from false to true. after that i again zip the folders strcuture make the file name as original in the form of .PAR file. now i am trying to upload it in the portal thru system admin->portal runtime->administration console, but i am getting the deployment error as mentioned in the below.
    even though with error, the wrong version of the par file with extension .err was saved in the PCD folder strcture, and original file also still exists. now i wanted to remove the wrong version of the file from PCD, what is the procedure to delete the wrong version, here in administration console i found one button clean , but i could not able to locate the wrong file version , only original right version showing up in the clean dropdown??
    Can u tell me what is the procedure to edit the PAR file manually after downloaded to the desktop, rather than going edit thru NWDS??
    if we need to upload the PAR file after changes, do we need to delete the original PAR file before we upload the new version of the same PAR or it will be automatically overwrite the original file with the same name??
    Still i am getting confusion, please let me know how to edit the PAR file manally and how to upload the PAR file with out any isse while uploading it in the portal thru system admin->administration console??
    Any pointers in this regard would be the great help to me??
    Error as i got while uploading the par file after the changes manually. (com.sap.portal.navigation.lightdetailednavigationtree.par)
    2011-01-24_07-40-18
    Application upload failed: com.sap.portal.navigation.lightdetailednavigationtree.par
    java.util.zip.ZipException: Error opening zip file /usr/sap/BIS/DVEBMGS13/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/deployment/pcd/com.sap.portal.navigation.lightdetailednavigationtree.par
    *     at java.util.zip.ZipFile.open(Native Method)*
    *     at java.util.zip.ZipFile.<init>(ZipFile.java:140)*
    *     at java.util.zip.ZipFile.<init>(ZipFile.java:155)*
    *     at com.sapportals.portal.prt.deployment.ArchiveIterator.iterate(ArchiveIterator.java:39)*
    *     at com.sapportals.portal.prt.deployment.UploadProcess.upload(UploadProcess.java:60)*
    *     at com.sapportals.portal.prt.deployment.DeploymentManager._uploadArchive(DeploymentManager.java:835)*
    *     at com.sapportals.portal.prt.deployment.DeploymentManager.uploadArchive(DeploymentManager.java:474)*
    *     at com.sapportals.portal.prt.deployment.DeploymentManager.uploadApplication(DeploymentManager.java:319)*
    *     at com.sap.ip.portal.admin.portalanywhere.ArchiveUploader.doUpload(ArchiveUploader.java:116)*
    *     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
    *     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)*
    *     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)*
    *     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)*
    *     at java.lang.reflect.Method.invoke(Method.java:391)*
    *     at com.sapportals.portal.prt.component.AbstractPortalComponent.handleRequestEvent(AbstractPortalComponent.java:706)*
    *     at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:412)*
    *     at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:249)*
    *     at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)*
    *     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:707)*
    *     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)*
    *     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)*
    *     at java.security.AccessController.doPrivileged(AccessController.java:246)*
    *     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)*
    *     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)*
    *     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)*
    *     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)*
    *     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)*
    *     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)*
    *     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)*
    *     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)*
    *     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)*
    *     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)*
    *     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)*
    *     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)*
    *     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)*
    *     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)*
    *     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)*
    *     at java.security.AccessController.doPrivileged(AccessController.java:219)*
    *     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)*
    *     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)*
    Can you please what are the steps if any specific while editing the PAR file manually and uploading it with out any issues??
    Thanks in advance.
    Regards,
    PortalUser
    Edited by: PortalUser100 on Jan 24, 2011 6:01 PM
    Edited by: PortalUser100 on Jan 24, 2011 6:04 PM
    Edited by: PortalUser100 on Jan 24, 2011 6:05 PM

    Hi Shusil,
    Thanks for your reply.
    I have one more dought here.
    the PAR file of lightdetailnavigation has been modified thru NWDS and deployed the PAR file by adding the required JARS.
    Now my question is, the application server which i am used as local portal server installed in my desktop.
    now this depoyed latest par file i have picked it from the workspace in the local desktop, and i am planning to upload the same PAR file in of the sandbox portal system of client , will it update successfully in the new portal apart from the deployed portal??
    i am here used the path system admin->support->portal runtime -> administrate console  ( this in the sand box system to upload the par file which was deployed in the local portal server in my desktop.
    Thanks,
    Portal user

  • Error while uploading the PAR file of Production to UAT-

    Hi Experts,
    Could you please help me out in resolving the error which i'm facing while uploading the PAR file.
    1. I have downloaded the par file from the production, imported to my NWDS.
    2. Made changes to my  HeadiView.jsp
    3. I want to test my implementation in UAT.So i have uploaded the PAR to UAT system.
    4. Below is the error i'm getting from the Log trace.
    #1.#D27E2000F002008200000020000BD0FE0004436CD4EBF6C2#1200034614604#com.sap.porta
    l.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#BVISHALA#17971##adcapsap18.
    uk_QP0_16441150#BVISHALA#5d8f9460c01111dcafa2d27e2000f002#Thread[PRT-Async 2,5,P
    RT-Async]##0#0#Error##Java###06:56_11/01/08_16441150
    [EXCEPTION]
    #1#com.sapportals.portal.prt.component.PortalComponentException: Error in in
    it method
    Component : com.tw.navigation.Masthead.HeaderiView
            at com.sapportals.portal.prt.component.PortalComponentContext.init(Porta
    lComponentContext.java:251)
            at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refr
    esh(PortalComponentContextItem.java:271)
            at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getC
    ontext(PortalComponentContextItem.java:316)
            at com.sapportals.portal.prt.component.PortalComponentRequest.getCompone
    ntContext(PortalComponentRequest.java:387)
            at com.sapportals.portal.pb.PageBuilder.createIviewProfile(PageBuilder.j
    ava:443)
            at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391
            at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.j
    ava:233)
            at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:6
    36)
            at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEve
    nt(AbstractPortalComponent.java:388)
            at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:816
            at com.sapportals.portal.prt.component.CachablePortalComponent.handleEve
    nt(CachablePortalComponent.java:703)
            at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode
    .java:252)
            at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.j
    ava:368)
            at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.
    java:340)
            at com.sapportals.portal.navigation.PortalLauncher.doOnNodeReady(PortalL
    auncher.java:318)
            at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEve
    nt(AbstractPortalComponent.java:388)
            at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode
    .java:252)
            at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.j
    ava:368)
            at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.
    java:340)
            at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(P
    ortalRequestManager.java:642)
            at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(
    ServletConnection.java:240)
            at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatc
    her.java:524)
            at java.security.AccessController.doPrivileged(AccessController.java:242
            at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.ja
    va:407)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.se
    rvice(InvokerServlet.java:156)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcher
    Impl.doWork(RequestDispatcherImpl.java:321)
            at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcher
    Impl.forward(RequestDispatcherImpl.java:377)
            at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServle
    t(HttpHandlerImpl.java:401)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleReq
    uest(HttpHandlerImpl.java:266)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServle
    t(RequestAnalizer.java:387)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServle
    t(RequestAnalizer.java:365)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebCo
    ntainer(RequestAnalizer.java:944)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(Requ
    estAnalizer.java:266)
            at com.sap.engine.services.httpserver.server.Client.handle(Client.java:9
    5)
            at com.sap.engine.services.httpserver.server.Processor.request(Processor
    .java:175)
            at com.sap.engine.core.service630.context.cluster.session.ApplicationSes
    sionMessageListener.process(ApplicationSessionMessageListener.java:33)
            at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRu
    nner.java:41)
            at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:3
    7)
            at java.security.AccessController.doPrivileged(AccessController.java:215
            at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.ja
    va:100)
            at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:1
    70)
    Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationExc
    eption: Could not instantiate implementation class com.btexx.pct.easyWCM.navigat
    ion.masthead.HeaderiView of Portal Component com.tw.navigation.Masthead.HeaderiV
    iew because: Could not find implementation class
            at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getIn
    stanceInternal(PortalComponentItemFacade.java:242)
            at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getCo
    mponentInstance(PortalComponentItemFacade.java:160)
            at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponen
    tInstance(PortalComponentItem.java:732)
            at com.sapportals.portal.prt.component.PortalComponentContext.getCompone
    nt(PortalComponentContext.java:103)
            at com.sapportals.portal.prt.component.PortalComponentContext.init(Porta
    lComponentContext.java:242)
            ... 44 more
    Caused by: java.lang.ClassNotFoundException: com.btexx.pct.easyWCM.navigation.ma
    sthead.HeaderiView
            at java.lang.Class.forNameImpl(Native Method)
            at java.lang.Class.forName(Class.java:152)
            at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getIn
    stanceInternal(PortalComponentItemFacade.java:228)
            ... 48 more
    Kindly help me to resolve this issue.
    Many Thanks,
    B.Vishali.

    Hi,
    The problem might be caused by the version inconsistency of your J2EE and Portal Platform. 
    Please check the version of your J2EE and Portal.
    Best Regards,
    Assaf

  • Error while uploading the attachement in IW32.

    Hi,
    Getting the error message "Include file in PC application Try again?" in the message box "Read Error during PC Upload"
    while uploading the attachement in IW32.

    hello
    The issue is no application issue but BC one. are you using Office 2007 or 2003 or 2010?
    please first check the information from OSS note 1237688, and see if entries exist for the Office release document classes (for exmple docx, xlsx etc.) in OAD2.
    i hope can be any of help.
    Regards,
    Jane

  • Error While uploading the Function and Function_BP

    Hello,
    I am getting the following error while uploading the Functions and Funtions_BP using the Rule Upload functions.
    com.virsa.cc.comp.Function_upload.onActionUploadFunc(Function_upload.java:302) com.virsa.cc.comp.wdp.InternalFunction_upload.wdInvokeEventHandler(InternalFunction_upload.java:150) com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) javax.servlet.http.HttpServlet.service(HttpServlet.java:760) javax.servlet.http.HttpServlet.service(HttpServlet.java:853) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) java.security.AccessController.doPrivileged(Native Method) com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    The files which i am uploading the file from the Best practises only.
    What is the reason for this error?
    Did any one get this error?
    Regards,
    Kumar Rayudu
    Edited by: Kumar Rayudu on Aug 4, 2009 12:32 PM

    Hello Kumar,
    Have you uploaded the SAP text and object files? Upload them first and then try to upload functions.
    Harleen
    SAP GRC RIG

  • Error message while uploading the flat file

    Hi Experts,
    I am getting the error message while uploading the flat file.
    Message class: MG
    Number: 147
    The message is: Several descriptions exist for the language JA.
    Please guide me why this error is occuring.
    Regards
    Akshay

    hi,
    how are you uploading the file and where ?
    u can use open dataset  , read dataset or gui_upload
    check this link
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/e92637c2cbf357e10000009b38f936/frameset.htm

  • FM to upload the Internal table data into application server.

    Hi,
      Could you please give me Function module to Upload the Internal table data into Application server ie., in Tcode AL11.
    I know for downloading the Application server file into itab is "SUBST_GET_FILE_LIST" FM and using open dtaa set we get the data.
    Regards,
    deepthi.

    Hi Deepthi
    Incase you are looking to upload data in the AL11 through a program , then you can make use of OPEN DATASET...CLOSE DATASET statements.
    Here's the code snippet:
    IF tb_alvdisplay[] IS INITIAL.
        MESSAGE e999(/dcsea/zais_msg) WITH text-e01.
      ELSE.
        IF  NOT cb_ufile IS INITIAL  "Download to file
         AND sy-pagno = 0.            "Only down page headers for first page
          PERFORM fm_concatenate_path_name USING    p_path
                                                    p_file
                                           CHANGING v_file.
    *Open file for download.
          PERFORM fm_open_file USING v_file .
        ENDIF.
        LOOP AT tb_alvdisplay.
          IF  NOT cb_ufile IS INITIAL.
    *Passing the values of the respective headings to the structure.
            ws_rec-vend_no     = tb_alvdisplay-vendno.
            ws_rec-vend_nm     = tb_alvdisplay-vendnm.
            ws_rec-title       = tb_alvdisplay-vendtl.
            ws_rec-add         = tb_alvdisplay-add.
            ws_rec-city1       = tb_alvdisplay-city1.
            ws_rec-region      = tb_alvdisplay-region.
            ws_rec-country     = tb_alvdisplay-country.
            ws_rec-pobox       = tb_alvdisplay-po.
            ws_rec-phone       = tb_alvdisplay-telf1.
            ws_rec-extn        = tb_alvdisplay-extn.
            ws_rec-fax         = tb_alvdisplay-telfx.
            ws_rec-zterm       = tb_alvdisplay-zterm.
            ws_rec-remark      = tb_alvdisplay-remark.
            ws_rec-email       = tb_alvdisplay-email.
    *Passing the separator 'PIPE' to the structure.
              ws_rec-sep01  = co_sep.
              ws_rec-sep02  = co_sep.
              ws_rec-sep03  = co_sep.
              ws_rec-sep04  = co_sep.
              ws_rec-sep05  = co_sep.
              ws_rec-sep06  = co_sep.
              ws_rec-sep07  = co_sep.
              ws_rec-sep08  = co_sep.
              ws_rec-sep09  = co_sep.
              ws_rec-sep10  = co_sep.
              ws_rec-sep11  = co_sep.
              ws_rec-sep12  = co_sep.
              ws_rec-sep13  = co_sep.
            TRANSFER ws_rec TO v_file.
          ENDIF.
          AT LAST.
            IF NOT cb_ufile IS INITIAL.
    *Closing the DATASET file.
              CLOSE DATASET v_file.
              IF sy-subrc <> 0.
    *Failure Message.
                MESSAGE e999(/dcsea/zais_msg) WITH text-t04 text-t06.
              ELSE.
    *Success message.
                MESSAGE s999(/dcsea/zais_msg) WITH text-t05.
              ENDIF.
            ENDIF.
          ENDAT.
        ENDLOOP.
      ENDIF.
    Also as Gautham suggested you can use tcode CG3Z or CG3Y incase you are looking to upload the data directly.
    FInally, you can search SCN using the keywords, "Upload to AL11" and you'll get loads of results.
    Hope this helps.
    Harsh

Maybe you are looking for