Escalation set in Performance Task for deadlines

Hello Team,
Below is the Setup i have configured under deadline for Escalation:
I was expecting an Alert to the Manager's Manager as the due date was today and escalation has to be triggered.
Do we need to schedule any process for this notification to be triggered? Am i missing any flow here.
Requirement is to send an escalation mail 1 level up manager when due date has been reached and the task is not completed.
Any help regarding this is much appreciated.
Regards
Suveer

No Experts to answer this???????????????????

Similar Messages

Objectives Setting Task for new Joiners

If the objectives setting period is from 01-Jan-2013 to 31-Mar-2013 and the appraisal period is from 01-Dec-2013 to 31-Dec-2013 it is understood that the objective setting period is closed on 31-Mar-2013. Now if there are new joiners during the year how can they set their objectives. I know that we can use the Enroll program to enroll them into a plan but this does not enable the set objectives task for the new joiners. This is urgent please advice.
Careen

Hi Careen,
The performance cycle starts with Objective setting and ends with Assessments. For example: If I am having the performance cycle from Apr to March then below will be the dates i will use for setups:
Plan period - 01-Apr-XXXX to 31-Mar-XXXX
Objective setting - This is the period you want the objective setting to be available to employees. In this case if the assessment starts in Jan then the dates for Objective setting will be
Objective start date - 01-Apr-XXXX and Objective end date - 31-DEC-XXXX
Appraisal start date can be always after the objective end date.
If the above concept is clear then for new joiners the best practice is that you re-publish the plan once every month on a specific date to include the new joiners in the plan automatically based on the eligibility profile. You can try this out very easily, publish your plan and post that create a new employee and re-publish the plan the newly created employee will get enrolled into the plan
Hope it helps. Let me know if you need further details.
Thanks,
Sanjay

Can you set up a template for live performance in GarageBand for iPad Air?

II'm trying to set up a template for live performance using GarageBand on my iPad Air. Can anyone advise? Thanks.

QuickTime is AppleScript aware and has its own "dictionary". Many scripts and droplets have already been compiled and you can download them from this link:
http://www.apple.com/applescript/quicktime/
Some need further editing to update them to version 7 features but it's not difficult using the Script Editor app.
Tiger's new Automator app could also be used but its feature set is rather basic. Newer actions are available for download from the Mac OSX Downloads page.

Is there a way to allow setting of "Due Date for All Tasks" to current date in OOB Workflow

Is there a way to allow setting of "Due Date for All Tasks" to current date in OOB Workflow
I need to set it today because there are tasks that is needed to be completed on the same day.
Is there a way without modifying the page/form. like a configuration or something?
----------------------- Sharepoint Newbie

Hi ,
As Ajeet said, for implement your requirement, you can change the data validation on the Due data field.
You can do as the following :
Open the site with SharePoint Designer 2010
Click on Workflows on the left launch, then find ‘Approval-SharePoint 2010’, click on it
On the Forms section, click ‘ReviewApproval_***.xsn’
Then you can find Due Data for All Tasks, and change the validation
In addition, if you create an approval workflow with SharePoint Designer, you can use a specific date, it contains hour and minute.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Doing the same task for different data.. Do I need Queues? How to use them if yes?

Hello all,
I have created a VI which is getting data from some FTP server and then after comparing with the HDD specified folder copy the missing data from the FTP ... Description is also in the VI. There are few things I need to ask.
1) The email sending VI gives error 1172..What could be the reason .. is it firewall.. or is there any mistake in the code?
2) As you people are experts so I really like any suggestion to improve the VI..
3) The most important .. Currently this VI can only perform the whole task for one FTP folder. Actually my task is I need to check for 4 different FTP folder on different servers..its not 4 different folder in one FTP .. its 4 different FTP.Now my question is how I can do this: First it compare and copy from FTP1.Then FTP2... and so on.. How can I change the data for the cluster for different FTPs? Do I need to use queues? If yes how because I don't have any experience with queues.
I will really appreciate is someone can either provide me the relevant example or can give me some idea.
The main VI is the 'TASK START'.VI please find the attached files.
Thanks
Regards,
Naqqash
Naqqash
Attachments:
Project.zip ‏151 KB

Hi Peter,
Thank you very much for your reply. I have understood your idea but there are few problems.
Please see the attached "Final test.vi".. actually my top level vi should be like this.. due to this reason I need to develop the cluster like one with name "Settings" as shown in Enum FTP events.vi.. In this cluster all the data types are not constants (but can be set as constants) and further all of them are not of same type so whenever I try to create as you created I have got error, wire broken..so what do you think i should do.. In this cluster there are different types of data .. string, path, numeric, array and a cluster with name file properties also... can't figure out what to do..I know things are little scattered and wiered but due to lack of experience, I guess, I am now a little bit confused for this matter. I
hope guys here in the forum will help me as you guys always did.
Naqqash
Attachments:
Final test.vi ‏11 KB
Enum FTP Events.vi ‏14 KB

Adding buildtime task for trim spaces

Hi,
how can I add buildtime task for removing whitespaces in AquaLogic 6.0? I know that I can set runtime param
<param-name>trimSpaces</param-name>
but it is not enough for me and impact on performance is unknown.
thanks in advance
bogo123

Hi.
Yes you can. Build a Task Flow consuming Spaces API (WebService or REST) and setting custom properties to it.
Steps that you have to follow is:
- Use API to create your group Space:
//create the Space
GroupSpaceWSMetadata gsMetadata =
client.createGroupSpace("Databases", "Databases" "A community for people interested in databases", "databases, oracle", "CommunityofInterest");
//print the Space GUID to provide confirmation of creation
System.out.println("GUID: " + gsMetadata.getGuid());- You can add programmatically custom attributes:
//create the custom attribute
client.setCustomAttribute("Databases", "Vendors", "List of vendors", "java.lang.String", "Oracle, IBM");Code is from WebCenter Spaces API off doc: http://docs.oracle.com/cd/E25178_01/webcenter.1111/e10148/jpsdg_spaces.htm#CIHIJBIG
Regards.

Schedule a task for a given period of time

Hi,
any body has an idea how to schedule a task for a specified period of time. e.g A program keeps on asking for your name to be input for an hour and then start doing something else?
/bob

hi friend,
Why don't you try using a TIMER. Try using this code
Timer timer = new Timer((TIMER), new ActionListener()
public void actionPerformed(ActionEvent ae)
// perform your task here...
timer.setInitialDelay(TIMER);
timer.setRepeats(true);
timer.start();
I think this will work fine.
Bye,
Ravi.

Task API - Completed Tasks for Creator

Hi,
I started to investigate the BPEL TaskManager Service following the Steps of Tutorial 6. That works great, no problem there.
Then I followed Tutorial 7 to invoke the BPEL process from a Java Application. That also works fine.
Finally I used the TaskManager API to retrieve all Tasks owned by a creator.
So I used the following code:
ITask[] creatorTasks = worklist.listTasksByCreator("TaskSample");
System.out.println( " **** Creator Tasks ****");
for (int j = 0; j < creatorTasks.length; j++) {
ITask thisTask = creatorTasks[j];
System.out.println("Task Title " + thisTask.getTitle() + " Status: " + thisTask.getStatus());
What happens is that the API is giving me only the tasks that are in the "Active" Status and I want also the ones that are in the "Completed" Status.
However with the following code, the completed tasks appear:
ITask[] allTasks = worklist.listTasks(1,100);
System.out.println( " **** All Tasks ****");
for (int j = 0; j < allTasks.length; j++) {
ITask thisTask = allTasks[j];
System.out.println("Task Title " + thisTask.getTitle() + " Status: " + thisTask.getStatus());
So my question is: does "listTasksByCreator" only gives the "Active" tasks or is this a bug ?
I will be waiting for your answer.
Thanks,
Claudio.

Hi Brooke,
I recommend to change the $item.percentcomp, $item.created, $item.status and $item.id to be like this: $item[" percentcomp"], $item[" created"], $item[" status"] and $item[" id"] in the command.
Please also make sure that the percentcomp or status is the internal name of the fields.
More reference:
SharePoint: A Complete Guide to Getting and Setting Fields using PowerShell:
http://social.technet.microsoft.com/wiki/contents/articles/20831.sharepoint-a-complete-guide-to-getting-and-setting-fields-using-powershell.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How to set fire action event for particular rows in a table

HI All,
I have a requirement in which I want to set fire action event for particular rows in a table based on some condition.
The table has columns like fullname,employee id etc.
So i want to set fire action event for particulars rows only which will saisfy some condition.

Atanu,
Your approach(setting fire action for few rows) seems not possible. Better to go ahead with workaround.
Do you want this functionality in processRequest(while page loading) or processFromRequest(on some event) method ? Give more explanation regd. your requirement ?
In either case loop through the rows and when your condition is met write the action to be performed in controller.
Regards,
Anand

New iPhone user needs guidance setting up 4 iPhones for family - best approach?

Hi - I'm a new iPhone user tasked with setting up 4 iPhones for family (three 4S, one 3GS). I set up the first 4S using my mother's existing Apple ID (she has an iPad) and I think (hope) hers is fine. When I set up my father's phone, my sister said to enter my mother's Apple ID during setup since they wanted to use a single Apple ID for iTunes purchases. The setup screen I'm referring to the 7th screen into the setup process for a new iPhone 4S (after the Welcome, Language, Country/Region, Location Services, Wi-Fi Networks, and Set Up iPhone screens), where it asks you to "Sign In with an Apple ID" or "Create a Free Apple ID". This screen was where I entered my mother's Apple ID into my father's phone.
By entering my mother's Apple ID on my father's phone at this point during setup, I seem to have created a "clone" of her phone - their phone numbers are distinct and they can call each other but iMessages sent to either of them initially appeared on BOTH phones. I think I have now fixed that by creating a separate Apple ID for my father after the fact and entering it under Settings>Messages. Thinking I could also enter his new Apple ID under Settings>iCloud, I found I could not change it from my mother's Apple ID (it's greyed out). I saw a recommendation in another post to click on the red "Delete Account" button at the bottom, but will that delete my mother's entire account or only its association with my father's phone?
Backing up a step or two, I'm worried that at this point I should have entered/created a new Apple ID on screen #7 during initial setup of my father's phone (instead of entering my mother's Apple ID), and that just changing settings in iMessage, iCloud, etc. won't really fix any problem(s) I've created. I hesitate to set up the other two phones before knowing how badly I've already messed things up with this one.
During the initial set up of my father's iPhone, should I have created/entered his own unique Apple ID on screen #7 instead of entering my mother's Apple ID? (and then on his phone AFTER setup was complete, changing to my mother's Apple ID under Settings>Store so that all purchases are shared)?
If yes, do I need to restore his phone to factory settings and set it up as a new phone so his phone behaves like his and not a clone of hers?
Without knowing what might be the best way to set up these 4 new iPhones, I was thinking the four unique users of these new phones would most likely want to share apps (by purchasing them with one Apple ID), backup/synch to one computer, but maintain separate iCloud accounts so everyone's info is private? I've spent time reading other posts and see so many different recommendations for families with multiple devices that my head is spinning. Many include questions from folks migrating from older phones or MobileMe. I think my situation is simpler in that there are 4 new iphones and one existing Apple ID. Have I missed some comprehensive post that clarifies the best way to set things up for families new to iPhones, or do needs vary so much that no single best way exists? Given my situation (and depending on which way I should proceed regarding having set up my father's phone with my mother's Apple ID), should I create/enter a separate Apple ID for each new phone user during initial setup so each phone is distinct from the others, and AFTER setup is complete, changing the iTunes and Store info to the shared Apple Id for purchases? Or can I customize each individual phone after the fact in Settings>Whatever so that even if I've entered the same Apple ID on Screen #7 during initial new phone setup, the 4 phones will ultimately be set up correctly?
So sorry to have to ask such basic questions. Many thanks, in advance, for any guidance provided to help me not make any (more?) mistakes during setup that will be a real headache to remedy later, once everyone has started using their phones.

Hi edgefield,sorry you're having so much trouble.
FIRST CREATE A BACKUP ON YOUR COMPUTER -ALWAYS BEFORE PLAYING WITH THE INFORMATION ON THE PHONES (it prevents losses)
Now I'll answer your questions)
During the initial set up of my father's iPhone, should I have created/entered his own unique Apple ID on screen #7 instead of entering my mother's Apple ID? (and then on his phone AFTER setup was complete, changing to my mother's Apple ID under Settings>Store so that all purchases are shared)?
Yes. Create his own apple id and sign him in. then tap settings ->store -> tap on the account name -> sign out.
Then sign in your fathers apple id. (create your fathers apple id on the computer, its much easier, trust me).
If yes, do I need to restore his phone to factory settings and set it up as a new phone so his phone behaves like his and not a clone of hers?##
No. Tap settings -> icloud, and turn everything off (keep on the phone option). Then DELETE ACCOUNT (it's got red around it and at the bottom of the screen if you scroll down). You cannot sign out of iCloud, you can only delete the account. Then clean up the contacts and information on the phone.
Then you tap settings -> iCloud and sign in. Put your fathers apple id in the section. His information will be uploaded to www.icloud.com. Then go to www.icloud.com and sign in with his apple id. Make sure his information is uploaded (you'll have to select timezone and such).
From that point you are fine except for iMessage.
For iMessage to function properly, only one apple id can be signed into the iTunes store (settings -> store). If they are both signed into the same apple id on the iTunes store, than you need to turn off iMessage on one of the phones. The iMessage may be delievered to either phone when both are signed in under the same apple id in the iTunes store.
tap settings -> messages -> imessage off
This also disables facetime. If you want them to have iMessage and Facetime, they have to have seperate apple id's signed into the iTunes store.
Have I missed some comprehensive post that clarifies the best way to set things up for families new to iPhones, or do needs vary so much that no single best way exists?
Not that I've seen, will consider creating one if I have time.
Given my situation (and depending on which way I should proceed regarding having set up my father's phone with my mother's Apple ID), should I create/enter a separate Apple ID for each new phone user during initial setup so each phone is distinct from the others, and AFTER setup is complete, changing the iTunes and Store info to the shared Apple Id for purchases?
Your best bet is to create each apple id on the computer (keyboards are easier to use) and then sign them each in during the creation process. Then change the iTunes store info to the stored apple id.
This will allow each person to serpate iClouds without interfering with each others Cloud as you set up new devices.
Or can I customize each individual phone after the fact in Settings>Whatever so that even if I've entered the same Apple ID on Screen #7 during initial new phone setup, the 4 phones will ultimately be set up correctly?
Doing it this way can cause problems (or used to, not sure if it still does), initially, when you set it up, it wants to create a backup or upload the blank info to iCloud. You are better off setting up their own apple id first and signing in with that, and then changing it in the iTunes store.
I'm off to bed, I'll check this thread tomorrow and see if you have any more questions/problems. Remember, always create a back-up before you do anything.

How to set up Airport Extreme for 11ac and 11n?

I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
Michael

How to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results.

Performing filter for field Tax Code (MWSKZ) in the Purchase Order

Hello Experts,
We have to perform a filter for field Tax Code in the purchase order (ME21N / ME22N / ME23N). We've tried to use SH SH_T007A and SSH_T007A with search help exit (e.g. F4_TAXCODE_USER_EXIT) but it is not working. The ABAP programmer has performed a debug and the standard does not check any line code in this function (the ABAP programmer has set a breakpoint into function F4_TAXCODE_USER_EXIT after assigning it for mentioned search helps)... it sounds like this program / search help is not called by standard program of ME2* transactions...
I've tried to look for some other object and other function called FI_F4_MWSKZ has been found... I've set a breakpoint there and when I open the search help for field tax code into transaction ME21N it works... but as I could see this function FI_F4_MWSKZ is a standard one which we can not change...
Have you ever had the same problem?
We are currently in the SAP 4.6C version. I've found lots of OSS notes but only valid for 6.0.
Maybe someone can help me on that.
Best regards,
Nilmar

hi,
goto gs01 transaction,give some name to ur step.
give the table name and field name.
then u can create a specific value set for that field.
save.
now u can use this set to define conditions for ur fields in obbh transaction.

Performance Tuning for a report

Hi,
We have developed a program which updates 2 fields namely Reorder Point and Rounding Value on the MRP1 tab in TCode MM03.
To update the fields, we are using the BAPI BAPI_MATERIAL_SAVEDATA.
The problem is that when we upload the data using a txt file, the program takes a very long time. Recently when we uploaded a file containing 2,00,000 records, it took 27 hours. Below is the main portion of the code (have ommitted the open data set etc). Please help us fine tune this, so that we can upload these 2,00,000 records in 2-3 hours.
select matnr from mara into table t_mara.
select werks from t001w into corresponding fields of table t_t001w .
select matnr werks from marc into corresponding fields of table t_marc.
loop at str_table into wa_table.
if not wa_table-partnumber is initial.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
   EXPORTING
     INPUT         = wa_table-partnumber
     IMPORTING
    OUTPUT        = wa_table-partnumber
endif.
clear wa_message.
read table t_mara into wa_mara with key matnr = wa_table-partnumber.
if sy-subrc is not initial.
concatenate 'material ' wa_table-partnumber ' doesnot exists'
into wa_message.
append wa_message to t_message.
endif.
read table t_t001w into wa_t001w with key werks = wa_table-HostLocID.
if sy-subrc is not initial.
concatenate 'plant ' wa_table-HostLocID ' doesnot exists' into
wa_message.
append wa_message to t_message.
else.
case wa_t001w-werks.
when 'DE40'
or 'DE42'
or 'DE44'
or 'CN61'
or 'US62'
or 'SG70'
or 'FI40'
read table t_marc into wa_marc with key matnr = wa_table-partnumber
                                        werks = wa_table-HostLocID.
if sy-subrc is not initial.
concatenate 'material' wa_table-partnumber ' not extended to plant'
wa_table-HostLocID into wa_message.
append wa_message to t_message.
endif.
when others.
concatenate 'plant ' wa_table-HostLocID ' not allowed'
into wa_message.
append wa_message to t_message.
endcase.
endif.
    if wa_message is initial.
      data: wa_headdata type BAPIMATHEAD,
      wa_PLANTDATA type BAPI_MARC,
      wa_PLANTDATAx type BAPI_MARCX.
      wa_headdata-MATERIAL = wa_table-PartNumber.
      wa_PLANTDATA-plant = wa_table-HostLocID.
      wa_PLANTDATAX-plant = wa_table-HostLocID.
      wa_PLANTDATA-REORDER_PT = wa_table-ROP.
      wa_PLANTDATAX-REORDER_PT = 'X'.
      wa_plantdata-ROUND_VAL = wa_table-EOQ.
      wa_plantdatax-round_val = 'X'.
      CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
        EXPORTING
          HEADDATA                   = wa_headdata
         PLANTDATA                  = wa_PLANTDATA
         PLANTDATAX                 = wa_PLANTDATAX
      IMPORTING
         RETURN                     = t_bapiret
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
write t_bapiret-message.
endif.
clear: wa_mara, wa_t001w, wa_marc.
endloop.
loop at t_message into wa_message.
write wa_message.
endloop.
Thanks in advance.
Peter
Edited by: kishan P on Sep 17, 2010 4:50 PM

Hi Peter,
I would suggest few changes in your code. Please refer below procedure to optimize the code.
Steps:
           Please run SE30 run time analysis and find out if ABAP code or Database fetch is taking time.
           Please run extended program check or code inspector to remove any errors and warnings.
           Few code changes that i would suggest in your code
          For select query from t001w & marc remove the corresponding clause as this also reduces the performance. ( For this you can define an Internal table with only the required fields in the order they are specified in the table and execute a select query to fetch these fields)
          Also put an initial check if str_table[] is not initial before you execute the loop.
          where ever you have used read table. Please sort these tables and use binary search.
          Please clear the work areas after every append statment.
          As i dont have a sap system handy. i would also check if my importing parameters for the bapi structure is a table. Incase its a table i would directly pass all the records to this table and then pass it to the bapi. Rather than looping every records and updating it.
Hope this helps to resolve your problem.
Have a nice day
Thanks

Setting up development landscape for E Commerce R/3

Hi Experts,
Need some good document reference for setting up our landscape for E Commerce 5.0.
I have gone through lot of documents and information but nothing consolidated about best practices to follow while doing so,
In our landscape we will have R/3 DEV, QA and PROD (All ready there) AND
3 corresponding AP 7 boxes for IPC and WAS (to deploy ISA java components)
The missing link in this is how best to use NWDI to talk to the 3 AP systems.
Q1 . Should we have 1 separate Box which has NWDI installed or can we use AP7 box for DEV to also use that for NWDI. (In this case on 1 BOX we will have IPC, WAS/ISA and NWDI.. so worried about performance)
Q2 Just in case itu2019s advisable to have a different BOX for NWDI, then how to configure NWDI to have all the 3 different AP 7 Boxes as part of development landscape to deploy ISA java applications from DEV to QA to PROD environment.
Thanks and regards,
Dips

Thanks for the reply.
My client says they dont have a QA environment. So they just have DEV and PROD. Since its a very small setup, We want to setup NWDI just for DEV and then PROD. Is it possible to not have QA ?
Regards,
Dips

Setting property attribute values for multiple selected objects.

Hello,
Is there an easy way to set the attribute property values for more that one selected Table Operator Attribute (column) at a time. For example the target table has over 100 columns but I only want to INSERT/UPDATE 10 of those columns. The generated MERGE, INSERT and UPDATE statements will perform DML on all of the columns in the target table, setting the 90 columns with no mapping set to NULL. This is due to the Loading Properties 'Load Column when Updating Row' and 'Load Column when Inserting Row' both default to Yes. I would like to select multiple Attributes in the Table Operator and change the 'Load Column when Updating Row' and 'Load Column when Inserting Row' to No. This is similar to what you were able to do in Oracle Forms 9.0 Designer select multiple Items in a Block and change the properties en-masse.
Thanks

Hi,
Using OMB scripting to set attribute properties in a data mapping sort of defeats the purpose of utilizing a graphical user interface to define and set properties for a data mapping? Surely the GUI data mapping tool was created to get away from writing scripts and scripting would also require that you know the name of the data mapping, table operator and the set of attribute names for which you have to write one line of script to set each property value, i.e. 90 lines to set 90 attribute values.
Cheers,
Phil

Escalation set in Performance Task for deadlines

Similar Messages

Maybe you are looking for