ESS Error when updating personal data

Hi all,
I am running into a problem from ESS when I try to update the personal data I get the following error message:
Data record 010000150002       9999123119500601000 has grouping value "" instead of "10"
I can translate the values in the massage:
01000015 is the PERNR
0002 is the infotype being updated
the space represents the subtype (there is no subtype)
99991231 is the BEGDA
19500601 is the date of birth
I have no idea what the 000 are
This is US employee so the number 10 is the country code for the USA
The value in doble quotes shows that the country grouping must be empty, but I have no idea how to solve this.
I have checked the configuration and it has the country grouping 10 and the employee master record belongs to the US.
Any help will be really appreciated.

Hi,
      This problem happens because of some inconsistensies . Please run the report 'RPUFIXDS' , specify the pernr which you are using,
then uncheck 'Test Run' Run the report after these settings are done.That should resolve your issue.
please refer note number : 783499
Regards,
Sharadha

Similar Messages

  • Error when updating the data from DSO to cube

    Hi,
    I am getting the error when uploading the data from the ods to cube.
    The following is the error message.
    Unable to determine period for date 20090101, fiscal year variant Z2: Error #
    How can i solve this issue.
    Regards
    Annie

    Hi ,
    fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
    check this link ..
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
    Regards,
    shikha

  • Error when create Personal data

    Hi Experts,
    I am creating Personnal in HR and using T.Code PA30. When i save it then having issue below.
    Error in the ABAP Application Program
    The current ABAP program "SAPLHRP3" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/1PAPA/FEAT000PINCH " in
    include "/1PAPA/FEAT000PINCH " in
    line 0:
    "The program "/1PAPA/FEAT000PINCH" is not Unicode-compatible, according"
    " to its program attributes."
    The include has been created and last changed by:
    Created by: "DDIC "
    Last changed by: "DDIC "
    please tell me How to solves it.
    Thanks very much.
    Dungnv

    Hi,
    Check the consistency of feature PINCH using PE03 by displaying it first and then pressing Cntrl+F2 and if it is error free then activate it.
    cheers
    Ajay

  • Error when updating ODS

    Hi,
      We got an error when updating ODS.
    The error message is "RSDRO_UPDATE_ODS".
    Its fetching all the records and its giving an error "when saving the aggregation information for ODS".
    We rectified the error.
    But how to fix it permenantly, what might be the reason for this error.
    Thanks in advance!!

    hI,
    I executed the program and there are no errors in the program and the program is active, but still we are often getting the error when updating the data in ODS.
    Please suggest me what might be the problem behind this....
    Thnaks in advance!!

  • Avoiding concurrency errors when updating a database through AJAX

    What are some strategies for avoiding concurrency errors when updating a database through AJAX. That is, in cases where a given user could attempt to modify the same row in the database with simultaneous requests (say, that he updates one column with information with an AJAX call, then immediately submits a form that updates the same row), what are some good ways yo prevent the two updates from colliding? On the JavaScript side one might make the AJAX call synchronous, but I question whether that is the best way to do it. Has anyone else confronted this?

    Well, since no one seems to have any ideas so far, I'll throw in my two cents worth.
    I'm not too familiar with AJAX so my advice may be limited.
    I suggest you do a google search on Optimistic concurrency database to get some ideas on how to handle it.
    If your update/insert/delete query is thread safe, then even if the same user double clicks the button fast enough to immediately have another update to the same record, then the first update will complete before the second one is carried out. Therefore no harm is done since he is just updating the same record. Since a typical update/insert/delete takes only a few milliseconds (querying may take a lot more time), its not likely he can click the button that fast. (I assume your using connection pooling for speed).
    The trouble comes up when two people call up data from the same record in different browsers. The first one updates/inserts/deletes the record. Now the other user is looking at old data. When he updates/inserts/deletes, there is a problem. One way to handle this is to keep a copy of all the fields from that record in each user's session scope when they first fetch it from the database (example: oldName). Then when you go to update some time later, to this:
    sql= update person set name=newValue where personID=3344 and name=oldName
    Note oldName is from session scope.
    If name in the database has changed, the update will not occur and will return 0 records updated. If it didn't change, it will update.
    Note your update function should not throw an exception if it cant update, it should return false. Return true if it worked.
    Example: public boolean updateName(String name)
    Similiarly, your insert should not throw an exception if the record already exists, it should return false meaning it cant insert.
    Exaple: public bolean insertName(String name). Same thing with delete function.
    If a record cant be updated due to someone else updating the record while the user was looking at data, return a message that it wasn't updated due to that problem. Then show the user the new value in the database ask him if he wants to overwrite the new change.
    Note even if you show 100 records on the JSP, only update the ones that have changed and not all 100. This way, its not likely he has updated the same records someone else has altered. Less likely a colision compared to updating all 100.
    If your updating/inserting/deleting more than 1 record (say, 3), then you should look into setting up a transaction in addition to all the above and rolling back all of them if one fails.
    Reading the section on databases from http://www.javapractices.com/home/HomeAction.do may also help.

  • Error when updating Playbook OS version via Blackberry Desktop Manager

    Greeting,
    I have a batch of old playbooks which having the stack charging issue, but I found that I can update the OS to the newest version (2.1.0.1917) via Blackberry Desktop Manager, then the charging algorithm will be changed to the updated one and go over this dead battery issue. I was able to do so successfully in the past week smoothly on several devices.
    But since this Monday, the Desktop Manager is saying "An updated Blackberry Desktop Software component must be installed before you can continue" when downloading the Desktop software and will appear "There was an error updating your software, an error has occurred while downloading the Blackberry Desktop Software.Please try again." and preventing the process. Seems there are some change on the server side starting this week which has caused this problem, but there's no error code to locate the exact issue.
    I tried on 2 different computers as well as completed uninstalling and re-installing the Desktop manager, also tried to disable the automatic update as been advised in some threads. So no clue how to deal with it for now. It will be highly appreciate if some one can share some idea.
    I've attached the step by step screenshots for reference, where you can find here:
    http://forums.crackberry.com/blackberry-playbook-f222/error-when-updating-playbook-os-version-via-bl...
    Thanks,

    BLock wrote:
    Sorry I can not help you with your problem but perhaps you can help me.  
    Can you advise where I can find info on "disable the automatic update"?
    just ignore the update if you dont want it on the playbook
    for reloading the OS
    First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
    This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
    After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
    Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
    You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
    QUICKLY choose the Update option.
    This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Error Loading Hierarchy Error when updating Idocs in Source System

    Hello  Friends,
         I am loading  hierarchy data  using Info pac into  0FUNDS_CTR . I have selected  a hierarchy under hierarchy selections tab  in the Info pac .
    All Partner profiles in WE20 seems OK .   But When I loaded data , throwing errrr message  as below
    Error when updating Idocs in Source System
    Diagnosis
    Errors have been reported in Source System during IDoc update:
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Source System . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.
    When I checked in TC WE05 says that  IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
    Please advice .
    Many thanks

    Hi  Krishna4bi,
    Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem  if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
    Hope it helps,
    By,
    Praveen Yagnamurthy,
    SAP BI Consultant,
    Blue Marlin Systems-INDIA.
    http://bluemarlinsys.com/bi.

  • Error when updating Idocs in Source System - Urgent

    Hi Team,
    When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
    When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
    <b>" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".</b>
    Can any one please help me to solve this error.
    This is am Urgent requirement for me to deliver.
    Thanks & Best Regards,
    Venkata.

    Hello VenkaTa,
    How r u ?
    The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
    Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • Error when updating Idocs in Source System

    Hi All,
    We did a recent copy from QAS to DEV,after which am unable to run my process chains ,the load status still showin yellow signal,whereas job is getting finished but am unable to load datas to the targets. Am getting the following error message when i see the display message in process chain.
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Source System . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.
    Error when updating Idocs in Source System     
    Could anyone please let me know what can be done ?
    Thanks
    con

    Hello All,
    I have same problem but its RESOLVED by the following process.
    Step - 1
    execute  the Function module "SCP_LANGUAGES_IN_INSTANCE".  It may or maynot give some output. Just note if it give the output
    Step - 2
    in Transaction SE38 execute the program "RSCPINST".
    Just Click on the Activate button (dont select anything).
    Step - 3
    Again do the same thing specified in Step - 1.  Now it will give the output saying that Language is DE.
    So by the above procedure my issue is been resolved.
    Regards
    Sankar

  • KP06 Cost Center Budget Planning System error when locking the data records

    Hi,
    While updating Cost Center Planning system(KP06) its giving the below error:
    System error when locking the data records.
    Message no. KI502
    Diagnosis
    The lock to protect the data records being processed could not be set. The
    probable reason for this is that the SAP locking table is full and no more
    entries can be added.
    Procedure
    Inform your system administrator immediately
    No planning data has been changed
    Message no. K8038
    Diagnosis
    You used Post. While preparing the data for posting, the SAP System
    determined that no changes were made in the available databank values.
    System Response
    A posting activity price is not necessary
    Please help me how can we rectify the above error..
    Thanks
    VS Rao

    Hi,
    check the locking entries (t-code SM12).
    http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
    Best regards, Christian

  • Error when updating to 4.2

    My Ipod Touch is on ios 2.2.1 and always get error when updating to 4.2

    I think you have a 1st Gen iPod Touch. You can only go up to iOS 2.2.1 OR you can purchased the iOS 3.1 firmware.
    http://support.apple.com/kb/ht2052
    Purchase the iOS 3.1 Software Update directly from the iTunes Store.
    IF NOT, then try to get a better internet connection (if connect with Wi-Fi) or wait a while and try to reupdate again. If you have to make sure iTunes is up to date (iTunes 11.x)
    Message was edited by: keeferaf

  • Error when transporting object data

    Hi,
    i have installed version 7.1 over verison 7 azdobe livecycle designer, howeven after installation, i try to made some changes, but i got the following error
    :" error when transporting object data", anyone familiar with this error?
    Please help. Thanks

    1) It seems that you have deleted a dependent info object from ODS in BW Dev. and so is the warning message that you have deleted that info object.
    2) if you have made some changes in an ODS and want to transport those to quality then you should delete all data from that ODS in quality. Delete all tables in ODS.
    3) You should activate update rules in development again and transport those with this request.
    Error 8 is error caused due to missing objects. do check your request thoughly before you re transport it.
    Hope this helps.
    Regards,

  • RPLDAP_EXTRACT - Error when updating the LDAP directory

    I am connecting SAP IdM 7.0 to SAP HCM via VDS.
    So far:
    The VDS responds to LDAP browser, the connection tests from SAP GUI are succesful.
    I can execute my copy of the standard report LDAPEXTRACT46C in SAP GUI and can see what data is exported.
    I get the "Error when updating the LDAP directory" error when trying to execute the RPLDAP_EXTRACT program.
    An error occurred during creation of one or more data records in the LDAP directory. The error has been logged in the system used to export data to the LDAP directory.
    You can find logs in the database tables TLDA_LOG (HR-LDAP: Non-Exported Data Records) and TLDA_MSG (Error Messages About Data in Table TLDA_LOG). Table TLDA_LOG contains data records that could not be exported; table TLDA_MSG contains the corresponding messages.
    I didn't see anything that makes sense in tables mentioned in the error message above.
    I have some questions as the documentation supplied with IdM is bit brief; According to the configuration guide I don't need to have any mapping in VDS like "conversion of internal attributes" or "conversion from internal attributes", has anyone else entered the mapping in VDS?
    Any pointers in going forward?
    Edited by: pasikuikka on Oct 20, 2009 11:01 AM

    Hi Pasikuikka,
    just a few questions:
    Have you checked TA HRLDAP_MAP? (Each field must have its expression in the LDAP-Target)
    Have you checked TA LDAPMAP? (Each field must have its expression in the LDAP-Target)
    Maybe there are attributes listed in the query, but not in the HCM-Staging-Area in the Identity Center.
    Have been new attributes created in the HCM-Staging-Area and, if so, are they connected to the right Entry-Type (MX_HCM_Employee or something like that)?
    Hope this puts you on the right track.
    Kind regards,
    Achim Heinekamp

  • Error when updating

    I get an error when updating. The message states,
    Adobe Photoshop Elements 12.1 update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Photoshop Camera Raw 8.5
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
    Do you know what causes this issue?

    Please see- https://helpx.adobe.com/photoshop-elements/kb/elements-12-1-update-error.html
    This error code occurs when multiple instances of Updater are open. Please refer to following forum link for more details: http://forums.adobe.com/message/4913117#4913117#4913117
    Thanks
    Andaleeb

  • RFC error when sending logon data

    Hi;
    We cannot configure the STMS of our development system. When we try to
    configure it, system gives an error message: Errors during distribution
    of tp configuration; TMS Alert Viewers tells us
    RFC_COMMUNICATION_FAILURE: RFC communications error with
    system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
    data and READ_PROFILE_FAILED:File
    erptest\sapmnt\trans\bin\TPPARAM
    could not be opened for reading (No such file or directory).
    Is there any advise for solution?
    Best regards
    Noyan
    PS: Please find the profiles below:
    START:
    #.*       Start profile START_DVEBMGS00_erptest                                                                                *
    #.*       Version                 = 000006                                                                                *
    #.*       Generated by user = BASIS                                                                                *
    #.*       Generated on = 30.12.2010 , 15:40:55                                                                                *
    generated by R3SETUP
    SAPSYSTEMNAME = FKT
    INSTANCE_NAME = DVEBMGS00
    SAPSYSTEM = 00
    SAPGLOBALHOST = erptest
    DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
    start database
    #_DB = strdbs.cmd
    #Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
    start message server
    #_MS = msg_server.exe
    Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
    Start IGS
    Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
    start application server
    #_DW = disp+work.exe
    #Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
      General parameters for starting the system
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #SAPSYSTEM = 00
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #SAPSYSTEMNAME = FKT
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #INSTANCE_NAME = DVEBMGS00
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    #SAPGLOBALHOST = erptest
      Start database
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    _DB = strdbs.cmd
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
      Start message server
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    MS = msgserver.exe
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
      Start applications server
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    _DW = disp+work.exe
    #parameter created                          by: BASIS        24.12.2007 23:53:27
    Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
    DEFAULT:
    SAPDBHOST = ERPTEST
    dbms/type = mss
    dbs/mss/server = ERPTEST
    dbs/mss/dbname = FKT
    dbs/mss/schema = fkt
    SAPSYSTEMNAME = FKT
    SAPGLOBALHOST = erptest
    SAPFQDN = tr.delta.is
    SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
    SAPDBHOST = erptest
    SAPTRANSHOST = erptest
    DIR_TRANS =
    $(SAPTRANSHOST)\sapmnt\trans
    #DIR_TRANS = D:\usr\sap\trans
    DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
    SAP Message Server for ABAP
    rdisp/mshost = erptest
    rdisp/sna_gateway = erptest
    rdisp/sna_gw_service = sapgw00
    rdisp/vbname = erptest_FKT_00
    rdisp/enqname = erptest_FKT_00
    rdisp/btcname = erptest_FKT_00
    rdisp/msserv = sapmsFKT
    rdisp/msserv_internal = 3900
    rdisp/bufrefmode = sendoff,exeauto
    login/system_client = 200
    #GUVENLIK PARAMETRELERI
    login/password_expiration_time = 90
    login/min_password_lng = 6
    #parameter created                          by: BASIS        25.03.2004 08:41:25
    rdisp/gui_auto_logout = 10800
    #parameter created                          by: BASIS        25.03.2004 08:37:47
    #old_value: 3                                 changed: BASIS 25.03.2004 08:42:38
    login/fails_to_user_lock = 6
    #validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
    #parameter created                          by: BASIS        16.06.2007 17:35:41
    #old_value: 2
    #changed:  BASIS         14.05.2008  15:24:55
    auth/rfc_authority_check = 1
    #otomatik unlocki iptal eder
    #parameter created                          by: BASIS        10.11.2006 17:47:15
    login/failed_user_auto_unlock = 0
    #AUDIT PARAMETRELER?
    #old_value:                                   changed: BASIS 20.04.2005 17:13:37
    rsau/max_diskspace/per_day = 1996800000
    #old_value: 1000000000                        changed: BASIS 20.04.2005 17:17:01
    #old_value: 0                                 changed: BASIS 20.04.2005 17:19:12
    rsau/max_diskspace/local = 2048000000
    #old_value: 2000000000                        changed: BASIS 28.03.2005 23:17:11
    #old_value: 2                                 changed: BASIS 29.03.2005 12:09:14
    #old_value: 0                                 changed: BASIS 20.04.2005 17:13:37
    rsau/max_diskspace/per_file = 665600000
    rsau/enable = 1
    rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
    rsau/selection_slots = 12
    #rec/client = ALL
    DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
    FN_AUDIT = ++++++++######..AUD
    #DIL PARAMETRELERI
    #Turkish codepage settings
    abap/import_char_conversion = 0
    install/codepage/db/non_transp = 1610
    install/codepage/db/transp = 1610
    zcsa/installed_languages = DET
    #zcsa/system_language = E
    zcsa/system_language = T
    zcsa/second_language = E
    install/codepage/appl_server = 1610
    #OS dependent
    abap/locale_ctype = Turkish_turkey.28599
    #DIR_PUT = D:\usr\sap\FKQ\upg\abap
       *** UPGRADE EXTENSIONS (RELEASE "701") ***
    #rdisp/msserv_internal = 3900
    #system/type = ABAP
    INSTANCE:
    SAPSYSTEMNAME = FKT
    SAPGLOBALHOST = erptest
    SAPSYSTEM = 00
    INSTANCE_NAME = DVEBMGS00
    DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
    DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
    icm/server_port_0 = PROT=HTTP,PORT=80$$
    SAP Message Server parameters are set in the DEFAULT.PFL
    ms/server_port_0 = PROT=HTTP,PORT=81$$
    #rdisp/wp_no_dia = 10
    #rdisp/wp_no_btc = 3
    #rdisp/wp_no_enq = 1
    #rdisp/wp_no_vb = 1
    #rdisp/wp_no_vb2 = 1
    #disp/wp_no_spo = 1
    rdisp/wp_no_dia = 12
    rdisp/wp_no_vb = 3
    rdisp/wp_no_vb2 = 0
    rdisp/wp_no_enq = 1
    rdisp/wp_no_btc = 3
    rdisp/wp_no_spo = 1
    #PERFORMANS PARAMETRELERI
    #parameter created                          by: SAP*         08.08.2001 10:30:18
    abap/fieldexit = yes
    #parameter created                          by: ALPER        13.10.2000 18:24:16
    install/collate/active = 1
    rdisp/max_wprun_time = 25000
    MEMORY_NO_MORE_PAGING dump nedeniyle
    #parameter created                          by: BASIS        27.12.2006 17:00:22
    rdisp/PG_MAXFS = 262144
    abap/heap_area_nondia = 2000000000
    rdisp/PG_SHM = 16384
    rdisp/ROLL_SHM = 32768
    #'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
    #Note 552209 - Maximum memory utilization for processes on NT/Win2000
    #parameter created                          by: BASIS        30.10.2007 10:57:24
    #abap/heap_area_nondia = 50000
    #parameter created                          by: BASIS        30.10.2007 10:58:54
    #rdisp/PG_SHM = 0
    #parameter created                          by: BASIS        30.10.2007 10:58:27
    #rdisp/ROLL_SHM = 625
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:49:57
    dbs/mss/stats_on = 1
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:49:33
    dbs/oledb/stats_on = 1
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:48:23
    dbs/oledb/add_procs = 8
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:47:29
    rsdb/esm/max_objects = 2000
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:47:03
    rsdb/otr/buffersize_kb = 4096
    #EWA report 12.2007
    #parameter created                          by: BASIS        03.01.2008 19:46:21
    rsdb/esm/buffersize_kb = 4096
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:18:14
    ztta/parameter_area = 16000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:16:43
    enque/table_size = 10000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:16:20
    gw/max_sys = 2000
    #Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:16:01
    gw/max_overflow_size = 25000000
    #Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:15:19
    rdisp/max_comm_entries = 2000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:14:48
    rdisp/tm_max_no = 2000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:14:20
    gw/max_conn = 2000
    Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:13:42
    rdisp/max_arq = 2000
    #Eyl#l 2006 EWA raporu
    #parameter created                          by: BASIS        24.11.2006 13:12:57
    ztta/roll_area = 3500000
    #parameter created                          by: BASIS        18.05.2005 09:20:25
    #old_value: 90                                changed: BASIS 18.05.2005 09:22:25
    rdisp/max_hold_time = 300
    #parameter created                          by: BASIS        20.08.2003 12:10:20
    #old_value: 6144
    #changed:  BASIS         03.01.2008  19:42:10
    rsdb/obj/buffersize = 20000
    #parameter created                          by: BASIS        20.08.2003 12:09:48
    #old_value: 6000
    #changed:  BASIS         03.01.2008  19:42:59
    rsdb/obj/max_objects = 20000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:42:11
    #old_value: 250000
    #changed:  BASIS         30.10.2007  10:56:17
    #abap/buffersize = 100000
    #changed:  BASIS         03.01.2008  19:40:36
    #abap/buffersize = 300000
    #by: BASIS 12.06.2008
    abap/buffersize = 400000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:41:32
    #zcsa/presentation_buffer_area = 20000000
    #64 bite gectikten sonra   by: BASIS 10.06.2008
    zcsa/presentation_buffer_area = 30000768
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:40:55
    rsdb/ntab/ftabsize = 30000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:40:12
    rtbb/max_tables = 500
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:39:15
    #old_value: 20000
    #changed:  BASIS         03.01.2008  19:41:29
    #rtbb/buffer_length = 30000
    #64 bite gectikten sonra  by: BASIS 10.06.2008
    rtbb/buffer_length = 50000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:38:26
    zcsa/db_max_buftab = 10000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:37:37
    #zcsa/table_buffer_area = 50000000
    #64 bite gectikten sonra   by: BASIS 10.06.2008
    #zcsa/table_buffer_area = 89000000
    by: BASIS 12.06.08
    zcsa/table_buffer_area = 99000000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:36:54
    sap/bufdir_entries = 10000
    note 103747
    #parameter created                          by: BASIS        08.07.2003 20:36:12
    rsdb/cua/buffersize = 8000
    #note 103747
    #parameter created                          by: BASIS        08.07.2003 20:34:46
    #old_value: 5000                              changed: BASIS 08.07.2003 20:35:39
    rsdb/ntab/sntabsize = 5500
    #parameter created                          by: BASIS        08.07.2003 20:33:56
    #note 103747
    #old_value: 10607                             changed: BASIS 08.07.2003 20:34:58
    #old_value: 10000                             changed: BASIS 08.07.2003 20:35:39
    rsdb/ntab/irbdsize = 11000
    #note 103747
    #parameter created                          by: BASIS        08.07.2003 20:32:18
    rsdb/ntab/entrycount = 40000
    #old_value: 2076                              changed: BASIS 28.06.2005 19:36:21
    #old_value: 5735                              changed: BASIS 28.06.2005 19:40:01
    PHYS_MEMSIZE = 4096
    #64 bite gectikten sonra   by: BASIS  10.06.2008
    abap/heaplimit = 40894464
    abap/heap_area_total = 2000683008
    ztta/roll_extension = 2000683008
    em/blocksize_KB = 4096
       *** UPGRADE EXTENSIONS (RELEASE "701") ***
    #rdisp/elem_per_queue = 2000
    #auth/auth_number_in_userbuffer = 9000
    #snc/enable = 0

    Hi Srikishan;
    You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
    Thanks for your help and interest
    Best regards
    Noyan

Maybe you are looking for

  • Where did my ringtones go after iOS 6 update

    After updating to iOS 6 my ringtones are gone on my iPhone 4? Anyone else have this issue? I can honestly say that I regret upgrading to iOS 6. First my music wasn't synching and I had to manually fix that myself, thanks to a post I found on here and

  • Problems with Windows 7

    I have a blackberry curve 8530 and I can't seem to synchronize my contacts that are in Windows Live Mail to my blackberry device using blackberry desktop software. Any suggestions?

  • Query in MD04 Report

    Hi Everyone, A Query in MD04 Stock/Requirement list. Actually in MD04,after choosing the indicator in MRP2 of material master record to '2 - Storage location Planned separately' for a particular storage location, the planned orders for that materials

  • Problems with java Thread

    I'm reading book "JAVA THREAD" published by OREILLY. And on fifth chapter, it gives an example. one Thread's two method: private boolean done = false; public void run() while(!done) foo(); public void setDone() done = true; it says, the run method wi

  • Sequence value missing

    Hello Gurus, I'm loading data from staging table to target and need to generate sequence while loading target. Using below tables. Table 1 SRC (staging table) Table 2 : TGT ( target table) ID name Sal           Seq ID name Sal 10 'abc' 200 1 10 'abc'