ESS Personal information country specific services
Dear Guru's,
We have set up the following country specific services (Dutch = molga 05) for the Personal Information Workset in ESS:
- Adresses
- Bank relations
- Personal Information
While testing these services for two persons the following situatin occurs:
- Person A: has parameter MOL 05 set in transaction SU01 and uses ESS portal role.
- Person B: has parameter MOL 05 set in transaction SU01 and also uses ESS portal role.
Als the country specific services are defined to the country speficif resources.
While trying to change the record in infotype 2, 6 and 9 for Person A using ESS all the procedures are succesfull.
While trying to change the record in infotype 2, 6 and 9 based on the date of today for Person B the systeem gives back the following error:
"record 00001101 0009 0 with date x has group value "" instead of "05".
(pernr) (infotype) (sub) (date previous record) (MOLGA)
This seems to be strange because both users have exactly the same profile in ECC and Portal.
Also the application seems te have a problem with the limitation of the previous record since the system says that that record has group value " " instead of "05"
Since this is the last problem we face in ESS we could need some help.
Kind regards
Hi,
This issue is because of data inconsistency. In se38, the report RPUFIXDS should be run to fix this.
This can be run for a single personnel number or a range of personnel numbers.
Thanks,
Muthukumar
Similar Messages
-
ESS Personal Information Services
Hi,
We are in planning to upgrade our existing ITS version to the latest webdynpro version ESS services. We will be implementing for 13 different countries. I can see based on the delivered Business Package that the iviews are based on specific countries (at lest for personal information). Due to this, i assume that i'll have to create 13 different roles (based on countries) and assign accordingly to the users (either this or use groups). Can someone confirm this? By the way, how is the checking being done against the user? Thanks
RegardsHi Nahoj,
The country-specific apps works with the country grouping information from SAP User. To assign the country grouping, set the MOL parameter in the ABAP User.
In the customizing side you disguise this information through 2 entries:
- All services:
Employee Self-Service > General Settings > Homepage for Self-Services > Services > Define Services
- Country-specific services:
Employee Self-Service > General Settings > Homepage for Self-Services > Services > Define Country-Specific Services
You can maintain/remove services inside your countries of application, but if still that not cover your requirements, you can add a country-specific app service from another country (check this link: [Reuse Country-Specific Applications|http://help.sap.com/erp2005_ehp_04/helpdata/EN/6d/5e207f3bb547aebdd1399aaa3d23d7/content.htm]).
When a User enter to Portal, after read Portal's Role, it reads the country grouping and display the services enabled from All Services + services enabled from Country-specific services for the corresponding User's country grouping.
Regards! -
RFC Call Error - from Portal End - For ESS Personal Information service
Hi,
I am getting "Syntax error in program SAPLHRXSS_PER_MAC ., error key: RFC_ERROR_SYSTEM_FAILURE " error Message on the portal (ESS--->Personal Information Screen).
When I did RFC trace analysis (using ST 22) this is what i get.
Can you let me know what could be the issue.
We are running HR Backend(Support Pack 15,ecc 5.0).
Portal (EP 6.0 SP19, ESS 100 (SP 10)).
Could you please let me know what could be the issue ?
Syntax error in program "SAPLHRXSS_PER_MAC ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPMSSY1" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLHRXSS_PER_MAC ", the following syntax error occurred
in the Include "IF_HRPA_PERNR_INFTY_XSS=======IU " in line 114:
"The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown."
Author and last person to change the Include are:
Author "SAP "
Last changed by "C5069405 "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLHRXSS_PER_MAC ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
In program "SAPLHRXSS_PER_MAC ", the following syntax error occurred:
"The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "srv006"
Network address.......... "167.116.230.56"
Operating system......... "HP-UX"
Release.................. "B.11.11"
Hardware type............ "9000/800"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 1
Short dump setting....... "full"
Database server.......... "srv006"
Database type............ "ORACLE"
Database name............ "H81"
Database owner........... "SAPR3"
Character set............ "en_US.iso88591"
SAP kernel............... "640"
Created on............... "May 21 2006 20:29:01"
Created in............... "HP-UX B.11.00 A 9000/800"
Database version......... "OCI_920 "
Patch level.............. "129"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "HP-UX B.11"
Memory usage.............
Roll..................... 16128
EM....................... 4189928
Heap..................... 0
Page..................... 0
MM Used.................. 629192
MM Free.................. 3558216
SAP Release.............. "640"
User and Transaction
Information on where terminated
The termination occurred in the ABAP program "SAPMSSY1" in
"REMOTE_FUNCTION_CALL".
The main program was "SAPMSSY1 ".
The termination occurred in line 68 of the source code of the (Include)
program "SAPMSSY1"
of the source code of program "SAPMSSY1" (when calling the editor 680).
Source Code Extract
Line SourceCde
38
39 module %_rfcdia_call output.
40 "Do not display screen !
41 call 'DY_INVISIBLE_SCREEN'.
42 perform remote_function_diacall.
43 endmodule.
44
45 module %_cpic_start.
46 if sy-xprog(4) = '%RFC'.
47 perform remote_function_call using rfctype_external_cpic.
48 else.
49 call 'APPC_HD' id 'HEADER' field header id 'CONVID' field convid.
50 perform cpic_call using convid.
51 endif.
52 endmodule.
53
54
55 form cpic_call using convid type c.
56 communication send id convid buffer header.
57 if sy-subrc eq 0.
58 perform (sy-xform) in program (sy-xprog).
59 else.
60 message a800.
61 endif.
62 endform.
63
64 form remote_function_call using value(type).
65 do.
66 * test if sy-xprog and sy-xform are set
67 * sy-xform = 'quatsch'. sy-xprog = 'quatsch'.
>>>>> call 'RfcImport' id 'Type' field type.
69 perform (sy-xform) in program (sy-xprog).
70 rsyn >scont sysc 00011111 0.
71 enddo.
72 endform.
73
74 form remote_function_diastart.
75 do.
76 call 'RfcImport' id 'Type' field rfctype_rfcdia.
77 perform (sy-xform) in program (sy-xprog).
78 "Parking position for next request
79 rsyn >scont sysc 00011111 10.
80 "ALternativ : Free mode
81 "COMMIT WORK.
82 "SYSTEM-CALL FREE MODE 0.
83 enddo.
84 endform.
85
86 form remote_function_diacall.
87 sy-xcode = '%_@no@'.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 2
SY-TABIX 0
SY-DBCNT 0
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
2 FORM SAPMSSY1 SAPMSSY1 68
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 2 Ty. FORM
Name REMOTE_FUNCTION_CALL
%_DUMMY$$
2222
0000
SY-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
SYST-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TYPE
3
0000
0003
SY-XPROG
SAPLSYST
5454555522222222222222222222222222222222
310C393400000000000000000000000000000000
SY-XFORM
HRXSS_PER_CLEANUP
455555545544444552222222222222
82833F052F3C51E500000000000000
%_SPACE
2
0
No. 1 Ty. MODULE (PBO)
Name %_RFC_START
%_PRINT
000 0 ##
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RFCTYPE_INTERNAL
3
0000
0003
Internal notes
The termination occurred in the function "ab_genprog" of the SAP
Basis System, specifically in line 1374 of the module
"//bas/640_REL/src/krn/runt/abgen.c#10".
The internal operation just processed is "CALY".
The internal session was started at 20070502223335.
Program name.........: "SAPLHRXSS_PER_MAC ".
Error message........: "The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown.".
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
( 0) 0x40000000016d6a8c CTrcStack2 + 0x2bc [dw.sapH81_DVEBMGS33]
( 1) 0x40000000016d67c0 CTrcStack + 0x18 [dw.sapH81_DVEBMGS33]
( 2) 0x4000000001d41438 rabax_CStackSave__Fv + 0x100 [dw.sapH81_DVEBMGS33]
( 3) 0x4000000001d4dbf8 ab_rabax + 0x1f68 [dw.sapH81_DVEBMGS33]
( 4) 0x40000000018cc09c ab_genprog__FPcPvUii + 0xdbc [dw.sapH81_DVEBMGS33]
( 5) 0x4000000000d3b4cc newload__FPcP13TmpSubpoolDirUi + 0x29c [dw.sapH81_DVEBMGS33]
( 6) 0x40000000016a7324 ab_LoadProg__FPcUi + 0xec [dw.sapH81_DVEBMGS33]
( 7) 0x40000000016831fc ab_link + 0x334 [dw.sapH81_DVEBMGS33]
( 8) 0x40000000015694d4 ab_rfcimport + 0xccc [dw.sapH81_DVEBMGS33]
( 9) 0x40000000018cff98 ab_jcaly__Fv + 0x598 [dw.sapH81_DVEBMGS33]
(10) 0x4000000000f98df8 ab_extri__Fv + 0x17a0 [dw.sapH81_DVEBMGS33]
(11) 0x40000000016ab2d8 ab_xevent__FPCc + 0x38 [dw.sapH81_DVEBMGS33]
(12) 0x400000000189c9a8 ab_dstep + 0x120 [dw.sapH81_DVEBMGS33]
(13) 0x4000000000ed4c00 dynpmcal + 0xd0 [dw.sapH81_DVEBMGS33]
(14) 0x4000000000ed1554 dynppbo0 + 0x1e4 [dw.sapH81_DVEBMGS33]
(15) 0x4000000000ed0af4 dynprctl + 0x43c [dw.sapH81_DVEBMGS33]
(16) 0x4000000000ecb7a0 dynpen00 + 0x2118 [dw.sapH81_DVEBMGS33]
(17) 0x4000000000fa598c Thdynpen00 + 0x6a4 [dw.sapH81_DVEBMGS33]
(18) 0x4000000000fa49b8 TskhLoop + 0x50d8 [dw.sapH81_DVEBMGS33]
(19) 0x4000000000f999f8 tskhstart + 0x1e0 [dw.sapH81_DVEBMGS33]
(20) 0x4000000000d42194 DpMain + 0x484 [dw.sapH81_DVEBMGS33]
(21) 0x400000000220d41c nlsui_main + 0x14 [dw.sapH81_DVEBMGS33]
(22) 0x4000000000992794 main + 0x14 [dw.sapH81_DVEBMGS33]
(23) 0xc000000000020ab0 $START$ + 0xa0 [/usr/lib/pa20_64/dld.sl]
List of ABAP programs affected
Index Ty. Program Group Date Time Size Lang.
0 Prg SAPMSSY1 0 06.11.2003 20:53:07 18432 E
1 Prg SAPLSYST 1 10.05.2006 09:57:38 30720 E
2 Typ SYST 0 04.12.2000 14:54:51 27648
Directory of Application Tables
Name Date Time Lngth
Val.
Program SAPMSSY1
SYST . . : : 00002404
ABAP Control Blocks (CONT)
Index Name Fl PAR0 PAR1 PAR2 PAR3 PAR4 PAR5 PAR6 SourceCde
118 CLEA 00 0035 SAPMSSY1
119 CLEA 00 0036 SAPMSSY1
120 CLEA 00 0037 SAPMSSY1
121 MESS 00 001C SAPMSSY1
122 ENDF 00 0000 SAPMSSY1
123 -
00 0000 SAPMSSY1
124 PERP 00 0001 SAPMSSY1
125 PERP 02 0000 SAPMSSY1
126 WHIL 00 0002 0000 0000 0000 0000 0000 0000 SAPMSSY1
130 WHIL 00 0003 0000 0000 0000 0000 0000 0000 SAPMSSY1
134 BRAN 05 000E SAPMSSY1
135 CALY 00 0003 0038 002A 0005 002B 0000 0000 SAPMSSY1
>>>>> CALY 02 0000 0039 8000 0000 0000 0000 0000 SAPMSSY1
143 xper 02 0000 0010 0011 SAPMSSY1
145 PERP 80 0000 SAPMSSY1
146 SYSC 1F 0000 SAPMSSY1
147 BRAX 00 FFEF SAPMSSY1
148 WHIL 00 0004 0000 0000 0000 0000 0000 0000 SAPMSSY1
152 ENDF 00 0000 SAPMSSY1
153 -
00 0000 SAPMSSY1Hi,
The error is occuring in the program file SAPLHRXSS_PER_MAC.
In program "SAPLHRXSS_PER_MAC ", the following syntax error occurred
in the Include "IF_HRPA_PERNR_INFTY_XSS=======IU " in line 114:
"The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown."
Information on where terminated
The termination occurred in the ABAP program "SAPMSSY1" in
"REMOTE_FUNCTION_CALL".
The main program was "SAPMSSY1 ".
This place where it has terminated is highlighted in bold letters.
form remote_function_call using value(type).
do.
test if sy-xprog and sy-xform are set
sy-xform = 'quatsch'. sy-xprog = 'quatsch'.
<b> call 'RfcImport' id 'Type' field type. </b>
perform (sy-xform) in program (sy-xprog).
rsyn >scont sysc 00011111 0.
enddo.
endform.
Thanks,
Manoj -
'india ' not appearing in country specific services
hi
this is regarding <b>personal information</b> role in ESS in EP. for configuring in the back end r/3 system , i go to SAP reference IMG..
when i go to "<b>Define Country-Specific Services (Add Entries)"</b> , i get a list of different country services..however, there is no country grouping defined for "India"...because of which i am unable to get the services...
all my settings are configured according to grouping "40" whixh is india...
can u suggest what i can do to add india in the list of countries?
thanks in advance,
aditiHi Aditi,
I hope u got ur answer in EP implementation Forum.
Regards,
Tejas -
ESS Personal Information not working
Dear All,
Here we have ECC 6 and EP7 SP10, we have uploaded BP ESS 1.0 SP 7.
For ESS Personal Information workset, iViews for Address, Bank Information, Family Information and Personal Data is showing a page in which it is given steps which are
1 Overview 2 Edit 3 Review and Save 4 Confirmation
Previous Step Exit
And also in SPRO setting for Personal information under ESS head is missing
Employee Self-Service-->Service-Specific Settings --> Personal Data , there is no personal Data link.
Kindly help me what needs to be done for Displaying iViews of Personal information and getting the link for Personal Data in SPRO under Employee Self Service.
Regards,
Sidhartha ChatterjeeDear Awadh,
I am able to see Own Data in SPRO.
Issue is that while running Personal Information --> Address iView, the page which is being shown is like this
[1] -
[2]--[3][4]--
Overview Edit Review and Save Confirmation
<Previous Step> <Exit>.
and no data is being Displayed.
The same is the case for other iViews of Personal Information like Bank Details and Family Details.
But for Personal Data iView it is giving this error
"<b>failed to create or init instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN' in scope APPLICATION_SCOPE with instanceId 'null'"</b>.
kindly tell me what needs to be done to resolve this issue.
Regards,
Sidhartha Chatterjee -
ESS Personal information few fields are in english and few are in Slovakia?
Hi,
We have installed EP7.0, ESS600
Incase of ESS Personal information workset few lable texts are in english and few are in country specific language (Poland) in other words.
In ESS the language translation for the languages Polish (Poland), Hungarian (Hungary), Czech (Czech) and Slovakian (Slovakia) are not fully reflected. Some texts are not translated and it is showing in English.
Any helpfull suggestions please
Regards,
MuraliHi Bala,
This not for one user. This basically for country specific.
Thing is for few countries there are no personal data iviews available in Portal for example Polish (Poland), Hungarian (Hungary), Czech (Czech) and Slovakian (Slovakia).
Hence the work around is for these languages we used other existing languages for example for Slovakia ( India). But few UI fields (Lable text) are appearing in Slovakia and few are English.
What may be the reason? did anybody faced similar situation.
Regards,
Murali -
ESS - Reuse of Country Specific Application
Hi,
I am working on EHP5 enviornment. I have a requirement to show the Personal ID service in ESS for country Mexico. But this is not available as standard in ESS for Mexico. So I have tried to reuse the service Personal ID for Thailand. I have done the below configurations:
1. Reuse of Screen Structure for New Country Version
View: V_T7XSSREUSEUISN
UI Structure name: HCMT_BSP_PA_TH_R0185
Type: Infotype.
2. Specify Use Case and Active Subtypes: View: V_T7XSSPERSUBTY
Ctry Grping: 32
Infotype: 185
Subtype: 01
3. Define Country-Specific Services (Add Entries): View: V_T7XSSSERSRVCG
Service Key: Z_EMPLOYEE_PERSINFO_PERSID05_Thailand
Link Resource: EMPLOYEE_PERSID_TH_SERVICE_13
I have checked the VIEKN table for an employee of Mexico and it contains the value 32.
Pls let me know what other configurations I need to do or that needs to be done from the portal end.
Thanks in anticipation.
Regards,
RanjeetaHi Ranjeeta,
This will work with these steps you have specified. Also refer to the following documents also,
http://wiki.sdn.sap.com/wiki/display/ERPHCM/HowtoReuseCountryspecificapplicationsforMolga99
This will solve your issue.
Regards,
Meera -
ESS personal information Nullpointer exception
Hi,
When I try to save data in any of the ESS Personal Information (like Personal data, addreses, etc) I get a nullpointerexception while saving. The data is getting saved but the navigation is not going to the next page. Any ideas?
Im on Portal 7.0 ECC 6.0 and ESS BP 1.0
java.lang.NullPointerException
at com.sap.xss.ser.xssconfview.vc.VcLinksView.wdDoModifyView(VcLinksView.java:167)
at com.sap.xss.ser.xssconfview.vc.wdp.InternalVcLinksView.wdDoModifyView(InternalVcLinksView.java:354)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
Regards
SriniSuresh,
I hace added the role Self Service admin to my user id. Now I see the FPM and sort of things under Content Provided by SAP. I am not sure what to do about it.
Is this a configuration step which needs to be done or does these things are come default on installation.
Regards
Srini -
In ESS- Personal Information want to call extra ITs.
Hi All,
We are using Portal versions 7.3 and ECC 6, EHP6
In Ess- Personal Information (Workset) there are 5 iviews (IT0002, IT0006, IT0009, IT0021, IT0185) this all are standard.
In this workset (Personal Information) I want to call another ITs. Those are (IT 0001, IT0028, IT0587, IT0588, IT0105, IT0022,) This all ITs I can see in table V_T7XSSPERSUBTYP - country grouping 40.
Can I call this above ITs without customization,
I am thinking without customization we can't configure.
Am I wright or wrong? Please let me know.
Can you tell me in which version we can do this if available.
Regards
Anoku RajHi Raj,
I think you can add any infotypes to the overview screen, Please look at the below link..
Adding any Info Type IN ESS in EHP5/6 through WebDynpro Configuration
Thank you,
kk -
In ESS- Personal Information- Calling another IT's
Hi All,
We are using Versions Portal 7.3 and ECC 6, EHP6
In Ess- Personal Information (Workset) there are 5 iviews (IT0002, IT0006, IT0009, IT0021, IT0185) this all are standard.
In this workset I want to call another ITs. Those are (IT 0001, IT0028, IT0587, IT0588, IT0105, IT0022,) This all ITs I can see in table V_T7xsspersubtyp country grouping 40.
Can I call this above ITs without customization,
I am thinking without customization we can't configure.
Am I wright or wrong? Please let me know.
Can you tell me in which version we can do this if available.
Regards
Anoku RajHello,
the link here might help you I think.
Adding any Info Type IN ESS in EHP5/6 through WebDynpro Configuration
Best regards
Hadrien -
Issue in ESS Personal Information iViews
Dear Experts,
I have an issue with ESS Personal Information details. The issue is the personal information related iViews such as Bank information , personal id, address iViews are only displays a road map and a button in disabled mode. Its doesn't display any data.
But my Employee search iViews are working fine.;
Any idea about this issue?
Thanks,
RamIm getting exactly like below in Bank information iView
[1] -
[2]--[3][4]--
Overview Edit Review and Save Confirmation
<Previous Step> <Exit>.
Please help me out!
Ram -
How to add 'Known As' field in ESS- Personal Information...Please guide
Hello All,
I have to show the 'Known As' field in the ESS->Personal Information page/workset.
Do I need to use NWDI for the same?
Please guide me as to how I can do this.
Awaiting Reply.
Thanks and Warm Regards,
Ritu
Message was edited by:
Ritu HunjanSolved it on my own.
-
Family Details in ESS personal information
Hi gurus,
how to edit the family details in ESS personal information .
when i click on family details link it is showing me spouse , child details
beside child and spouse details there is a edit button, when i click on edit button it is showing the information in display mode,
i want to change this to edit mode so than employee can change and save his family data.
Note:- i have searched SDN , what i found is ,how to hide that edit button
throw some light on this.
Regards
K Naveen Kishore.Hi Navin,
Looks like some one has made fields readonly.
1. It can be done via personalization
2. It can be done from NWDS
Do the personalization and make the fields required fields editable.
See tish help link on how to do personalization.
http://help.sap.com/saphelp_nw70/helpdata/en/42/ed3ce7f8593eebe10000000a1553f7/content.htm
Make sure ur user id has the Content Admin role and the valid pernr attached.
Regards
Yugandhar Reddy -
We have setup a new custom service and assigned to only country group 10 - US in the Define Country specific Services Node.
However, when we login as a PERNR in a non-us country group, he is able to view this service and launch the WDA application.
Are there additional setting to restict a service to specific country groups?Hi,
Check following ...................
You define country-specific services. When an employee starts a service, the system determines the employee's country grouping and checks if there is a country-specific service definition in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views.
If there is a country-specific service definition, the system uses this definition.
If there is no country-specific service definition, the system uses the general service definition in the V_T7XSSSERSRV and V_T7XSSSERSRVC views. If the general service definition does not contain a resource object, the system does not display the service (see example 2).
This enables you to define country-specific variations of services for certain countries while using a general service definition for all other countries.
Activities
Examples
Example 1
Your company has employees in seven different countries:
Germany (01)
Austria (02)
Switzerland (03)
Canada (07)
USA (10)
(Number in brackets = country grouping)
The service for displaying a salary statement is the same for Germany, Austria, and Switzerland. For Canada and the USA, you need services with additional content.
You define a general service for displaying the salary statement in the V_T7XSSSERSRV and V_T7XSSSERSRVC views.
You define two additional services for the country groupings 07 and 10 in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views.
When an employee from Germany, Austria or Switzerland starts the service for displaying salary statements, the system uses the service definition in the V_T7XSSSERSRV and V_T7XSSSERSRVC views.
When an employee from Canada or the USA starts the service for displaying salary statements, the system uses the service definition in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views.
Example 2
Your company has employees in two different countries:
Germany (01)
Switzerland (03)
(Number in brackets = country grouping)
There is a service that is only relevant for employees from Switzerland.
You define a general service without a resource object in the V_T7XSSSERSRV and V_T7XSSSERSRVC views.
You define a country-specific service with a resource object for country grouping 03 in the V_T7XSSSERSRVCG and V_T7XSSSERSRVCGC views
This service is only displayed for employees in Switzerland. -
Is it bug/error from SAP on ESS - Personal Information-Address exit button
Hello Experts,
when i click on ESS - Personal information - Address exit button here when i click on exit button its opening another portal actually it should go back to same portal ESS - Personal information - Address
is this error/bug from SAP
if no what could be
could anybody help me on this issue.
Thanks
Regards
VijayHello Eperts,
Sorry, i want to reopen this thread, to clear one issue.
i tryed and solved this issue.
try to configre the workprotect in personalization so it discard changes and open in the same page.
all my portal user are facing the same problem.
my question is Do i need to do changes for all user in personaliztion.
Do we have any global chage at once i do it takes effect for all users.
Any help on this Please.
Thanksyou,
regards
Vijai
Maybe you are looking for
-
Required help for Identifying diff. items in file content conversion.
Hi All, I've to use a file content conversion parameters for a .txt file in which there are two objects. One is a header and the other is a item detail. How do we get or mark the difference between both so that XI recognizes the particular line is a
-
I have a problem with indesign cs6 and my epson 3880 on mac
I have a problem with indesign cs6 and my epson 3880 on mac. I need an older version of indesign but do not have a serial number....any suggestions?
-
IMessage goes to stranger instead of my contact
For some reason, when I try to text my friend while iMessage is activated on my phone, the message goes to a complete stranger (who is getting annoyed with me). If I SMS to the same number, it goes through to my friend just as it should. My friend d
-
Hello, Should it not be possible to delete all data in a standard POS retail cube, delete the init request setting in data package, delete the delta queue AND THEN perform a new delta init? This delta init should then pick up all data from the extrac
-
CSCug52239 - CPS-MSP-1RU server showing DIMM Voltage error in VSM 7.0 - 1
Where is the BIOS update of MSP-1RU-K9 server? I have the same issue about DIMM voltage error.. Please urgent case... Thanks. Necip TOMURCUK