Essbase Connection Failed

Hi All,
While Creating Datasource in Planning 9.3 i m getting the message 'Essbase Connection Failed'. I checked the services of Essbase and Planning working fine. What could be the reasons for this error messages.
Please advice.

Hi,
Can you actually log into essbase using the account details you are putting into the config utility.
Have a look in the config logs to see if there is any further information.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Creating new Data Source Error - Database connection Failed

Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.

Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance.

Essbase excel plugin error - "essbase uniquyfyforuser failed to get.."

Hello Everyone,
I have Hyperion and Essbase Fusion Edition installed in the same machine. Whenever I open a new instance of excel, I get the Hyperion (Smart View) addin, but I do not get the Essbase Plugin. Instead I get the following error message:
"essbase uniquyfyforuser failed to get unique name size, code 1355"
Any suggestion would be of great help.
Thanks
Sayantan

Hi,
Try this KBase 1357924 (See below), it would help and eliminate one of the possible causes.
Symptom
SAP Netweaver BEx variables don't show up in BusinessObjects Xcelsius application during refresh
It is not possible to dynamically answer the query prompt differently
error: Failed to get the document information
Cause
A WebIntelligence query on an SAP data source - passing prompt values through a LiveOffice connection in Xcelsius 2008 - does not return any output.
The ability to query an SAP datasource from Xcelsius is currently not fully functionally supported.
Resolution
Additional support for BI variables will be delivered with Enhancement Request # ADAPT01178138:
Direct access from BOBJ Xcelsius Designer to SAP BW BEx queries, via a new SAP Menu and connectivity to BI Consumer Services
The new access type does not go via BusinessObjects Enterprise (so no QaaWS or LiveOffice involved), instead the SAP Embedded Analytics connector creates .SWF visualizations which are published back into NetWeaver to handle authentication & data fetch run.
Prerequisite system requirements:
SAP NW BW 7.0.1 SP5 (Sept 2009)
Xcelsius Designer 2008 SP2 (end July 2009)
BEx Front-end GUI Patch 9.01 (available)
Regards,
Ken

FDQM Target Dimension - connection failed

Hi, I am getting started to FDQM and I am trying to prepare the new environment so I started with the workbench and finished these steps:-
1) Imported the Essbase adapter (ES11XG4-J) to the application then registered it successfully.
2) Edited the two environment variables "ESSBASEPATH" and "PATH" with the right variables specified in oracle docs.
3) Opened the configurations of the Adapter from the workbench and submitted this settings:-
a) Source and Target Machines.
b) Application name, Essbase DB Name
The issue now is that when I view the mapped dimensions at the "Dimensions" tab, It always gives me a 'connection failed" error beside the "Target Dimension" label so I can't complete my work to map the dimensions.
I checked the error log also, and found that the error existing now saying "Essbase AP Procedure: [EsbSetActive] Threw code: 1051032-1051032", I searched for this error in the forum here but the solutions offered not working with me!
Your help is much appreciated , Thanks in advance

we need to update, ARBORPATH and ESSBASEPATH first, then in the PATH add as shown in the below link(If it is 64 bit machine)
Hyperion Installations and Implementations: FDM-Essbase Adapter Issue in Hyperion 11.1.2.x
Make sure, you have installed Essbase Client in the FDM Machine.
Once the Environmental Variables changes done, restart the Server then try again.
Let me know if you face any issue....!
Thanks,
Mady

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!

... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that.

JDBC Adapter - Established database connection failed

Hi Guys,
we have installed the JDBC Adapter based on the How To Guide and we checked after the installation the Libaries :Cluster --> Server --> Libraries --> com.sap.aii.af.jmsproviderlib and the box Box "JARs Contained" was filled.
So in my point of view we have done everything right during the installation.
Now the developer tested theJDBC Adapter and he comes back with following Error:
Attempt to establish database connection failed with SQL error com.sap.aii.adapter.jdbc.sql.DriverManagementException: Cannot establish connection to URL "jdbc:microsoft:sqlserver://xxx.x.xx.xxx:1433; databaseName=CZZ03;":ClassNot FoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
Do you have any ideas?
Regards
Markus

Hello Markus,
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Thanks,
Satya Kumar
Reward Points If it is Useful..

Submit Button error - Data Connection failing

I am the form designer and am currently testing a new form I have created, however there is an error with my submit button which Saves the form to SharePoint, I receive the following error message:
InfoPath cannot submit the form.
An error occurred while the form was being submitted.
The form cannot be submitted to the following location: http://servername/siteA/siteB/siteC/FormLibrary/FormName.xml
The file: http://servername/siteA/siteB/siteC/FormLibrary/FormName.xml" is checked out for editing by DOMAIN\MyUserName.
The operation completed successfully.
The form is not checked out to me, or open by anybody else, also check out functionality is not forced on this SharePoint library.
On searching forums I have read about using friendly server names and I am using the server's name in the URL, i.e.
http://servername instead of the alias
http://intranet - this had solved the problem in other forms, but not this one.
Looking closely at the rules on my submit button, the following actions occur:
1st rule checks the selection of certain fields, if the conditions are right it will set the values of 3 different fields.
The 2nd rule saves to SharePoint using a data connection (please note this data connection works fine on different submit buttons in different views). The second rule also closes the form.
To test where the error occurs I added a series of actions to display messages, and the problem is definitely on the data connection rule.
The data connection is to save to a Sharepoint library, using a field called "filename" as the file name. The data connection allows overwrites. The file name is set the first time a file is saved (it has a condition which checks a field which
gets set upon any save event - if this field is set to 0 filename gets set and this field gets set to 1 - because this field is now equal to 1, the filename field will nwever get set again).
I have 2 views on the form, one named phase 1, the other named phase 2. When the custom submit button is pressed on the phase 1 view, my data connection works, but on the save 2 view, the exact same data connection fails with the error message above.
I am using Windows 7, InfoPath 2010, SharePoint 2010, InfoPath filler form).
In Windows XP, for a different user, the error messaeg is a little different, and the form does actually save:
InfoPath cannot submit the form
An error occurred while the form was being submitted
The form cannot be submitted to the following location: http://servername/siteA/siteB/siteC/FormLibrary/FormName.xml
The file is in use by another application or user.
As I said the form does actually save its changes but still throws up this error message which will be very confusing to end users.
I've exhausted all avenues that I know of to find the cause of the error messages and I'm at a loss, please help!
Thanks,
Ben

bgvball14. I found that the error was down to the friendly name / server name issue. I have made sure that everything uses the friendly name e.g.
http://intranet instead of the servername e.g.
http://servername. I made sure the data connection and all options in the publishing wizard are set to the friendly name. There were still some forms that didn't work though - this was because when trying to fix this problem I had switched several times
between using the friendly /server names and some forms were looking for the template with the server name (these didn't work), other forms looked for the friendly name (these did work).
What I did was open my form library in windows explorer view and then drag each form into Notepad so I could see the source code. On the top two lines I could see the reference to the template and in some cases the template weas referenced using the server
aname, which I changed to the friendly name and this worked. I did have to check every form in the library. Basically, everything should reference the friendly name (e.g.
http://intranet.
Ben

Connection failed when trying to connect to external Lacie hard disk

I have an external Lacie hard disk which sits under and is connected to my Airport Extreme base station. I access that volume by using the 'Connect to Server' option in the finder, and I can see the Lacie drive when I get to the stage where I click to 'browse' and then click the Network icon.
However, today instead of connecting as usual (after asking for password authorisation, etc.) I now get a temporary window message saying:
"Looking up, "x1-6........local..." I guess the IP address?
After 3 minutes I then get the following error message:
CONNECTION FAILED
The server may not exist or it is not operational at this time. Check the server name or IP address and try again.
Yesterday I had a problem with my MacPro while trying to access info on the Lacie volume and with no response from the MacPro to shut down, I had to hold the start button down to get it to shut down. I then turned the Airport Express and Lacie disk off at the main plug powerpoint (I forgot to dismount the Lacie volume from another Mac running!). Hoping this would reset everything, but now this problem has happened!
Any help or advice on this would be much appreciated as I hold some key financial and business info on the Lacie volume and I can't access it now!!!
Thanks

Hi Rick
That's worked!
I did reboot Airport Extreme initially (had to switch off power to AEBS and Lacie disk as looks like there is no power switch on the AEBS?...and tried, but same problem. But then tried this again and all now works as before.
Thanks for your advice and the direct connection tip, which I was considering doing anyway if the conventional route didn't work.
Phew!

"Connection Failed" when trying to connect to another Mac on my wireless network.

Hi,
I am having an intermittent problem with the connectivity between my iMac and Mac Pro - the latter is the media server for our house. Occasionally my Apple TV's seem to lose connectivity to the Mac Pro too which is a real pain. Both Macs are running Mavericks and the Apple TVs are running the latest software too.
If I try to connect to the Mac Pro in Finder on my iMac, the Mac Pro is there but when I click on it I get "Connection Failed". Rebooting both computers seems to fix the problem but is far from ideal when mid way through a film!
The messages in console on my iMac when I try to connect to the Mac Pro in Finder is:
14/03/2014 10:20:33.542 sharingd[253]: SDSharePointBrowser::handleOpenCallBack returned -5999
14/03/2014 10:23:34.180 locationd[82]: could not open write stream for /var/db/locationd/clients.plist
I'm not sure if this provides a clue?
Thanks in anticipation,
Rob

I've managed to connect OK using Connect as. So at least that part is solved. I will see if I can get any diagnostics as to why the Apple TV drops out.

Why do I get connection failed when logging in on app store on wireless, but Wired LAN works fine?

I've been having the same issue as many other people. On OSX Lion with latest updates as of 3/20/2012. Tried deleting .plist files, checking keychain access and even reset keychain. I still get the error of Connection Failed when trying to download updates or a new app from the app store.
I also can't connect to the iTunes "Account" area. It produces an error that the request failed (-1200)
I finally decided to try a wired connection instead of my wireless. Now it works great! So I removed my wireless network and re-added it. Back to square one. Work around for now is fine, but I should be able to use this over wireless, too!
I just now tested connecting to a different wireless network (EVO Hotspot) and it worked fine. So it's something specific to my office wireless network. Nothing changed on our firewall (I'm the administrator). It just stopped working.
Anthony

Hi ...
Perhaps there's something that you haven't tried here > Troubleshooting Wi-Fi issues in OS X Lion

Unable to connect to website losing connection and the result is displayed as Secure Connection Failed (Error code: ssl_error_access_denied_alert)

Secure Connection Failed
An error occurred during a connection to website name
Peer received a valid certificate, but access was denied.
(Error code: ssl_error_access_denied_alert)
# The page you are trying to view can not be shown because the authenticity of the received data could not be verified.
# Please contact the web site owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.

Still experiencing this problem and hoping someone may have some ideas to try on the server.

Mail: "connection failed", problem associated with software update

When I attempt to get mail, I frequently get a symbol on the side panel of an encircled triangle enclosing an exclamation point. If I click on the symbol, I get a message that says (condensed): “connection failed, check settings for your POP account, server error encountered, connection timed out on port 0, do you want to stay offline or go online.” If I click go online, the usual spinning circle appears and then sometimes I get my mail. Sometimes I have to repeat the process several times before I get mail. I am, of course, always online; the connection has never failed. This problem started some time ago after I updated Apple software. I called my ISP and they made a few changes in my mail preferences, but that didn't help. I used disc utility to repair disc permissions and that helped but (strangely enough) only for a few days. This problem was discussed several years ago in message #1724339 but nobody could solve it. Can anyone solve it now? Thanks. Robert Pollock

Hi Wolfgang,
check out the "Nokia 808 Belle FP1 bug: WLAN works, but not all ap..." thread. Looks like you are having the same issue, and there's quite some info on this issue in that thread. The issue must be related to Symbian Belle somehow, since Anna and S60v5 are reported to perform well under the same conditions.
Best regards,
Tobias
www.tf-translate.net
www.deutscheschule.kiev.ua

Connection Failed: The server "name" may not exist or it is unavailable...

So I think I know what caused this problem, but I can't figure out how to make it stop...
When I go to print, if I try to click on the pop-up to change the default printer setting, there's a LONG delay, then I get a dialog that says:
Connection Failed
The server "name" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, then try again.
Then there's another delay and I get the message a second time. I can then select any of my printer settings and print fine, it's just an annoying delay if I click on that pop-up accidentally or need to change it.
I have a new iMac and I migrated from my old G5. The "name" of the server it is seeking is my old G5, so that must be in the settings somewhere, but I can't find it. I tried going into the Print & Fax settings in System Preferences, deleting the printer there, and then re-adding, but that didn't clear it up.
Thanks for any insight you can provide!
--John

Hmm, well, this stopped working again for me. I tried swapping ethernet and re-installing the Airport client update - to no avail. I could always see my Mac shares from PCs though. However, I have (for now) managed to connect to the PC using ip address rather than name even though finder quite clearly sees the name. Does your printer connection work by ip rather than name ? I'm going to play name lookup detective for a bit now - it's some kind of Netbios name lookup issue I guess as I've no local DNS service. resolv.conf is apparently not used so a bit of learning to do! ...
... nmblookup seems to work but nslookup doesn't. Looks like SL connect via Finder isn't using nmblookup properly and I can't see how to make that work. When this gets reported enough it should get a publicised work-round or a fix. If only I can get dig/nslookup to slave out to nmblookup ...must be something I can configure for that ??

Error "Connection Failed The server may not exist or is not operational..."

This is just FYI in case somebody else runs across this. On one user account, an error window would pop up every so often that said:
Connection Failed
The server may not exist or it is not operational at this time. Check the server name or IP address and try again.
It turns out that the problem was caused by Screen Saver. The error popped up whenever screen saver tried to launch. On the problem account I had the "Pictures" folder selected for the screen saver, and apparently there must be an alias in that folder pointing to something on a remote server, because as soon as I go to System Preferences and open the Screen Saver panel, I get the error.
It has been driving me crazy for months but finally I thought to look in Console, where I saw the error "afp_mount[5045] CFLog (0): CFMessagePort: bootstrap_register(): failed 1103 (0x44f), port = 0x2d03, name = 'com.apple.afp_mount.ServiceProvider'"
Searching for that error led me to the Macosxhints forum at http://forums.macosxhints.com/archive/index.php/t-53209.html where a user had posted the same problem. Changing to a different screen saver or a different folder for pictures resolved the issue.
PowerMac G5 Mac OS X (10.4.6)
PowerMac G5 Mac OS X (10.4.6)

Welcome to discussions leffjay. Good one. Cheers.

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.

It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
Lion is also affected but not as badly.
7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
Obviously that is not a solution for a later Gen5 TC.
Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
I prefer the very short lease but response has been mixed.
Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

Essbase Connection Failed

Similar Messages

Maybe you are looking for