Essbase execution inside fixes

Hello,
I need some clarifications if possible :)
In the following calculation, when are the values calculated if the 3 macros run inside the same fixed members and each macro needs the results from te previous one calculated?
I ask to be sure that I don't need to close the fix for each macro individualy.A simple comparison: Example 1 vs 2 would clear me out. In example 2 will it pass 3 times over the same number of blocks?
Thank you
Example 1:
FIX(A,B,C)
FIX(D,E,F)
%Macro1()
%Macro2()
%Macro3()
ENDFIX
ENDFIX
Example 2:
FIX(A,B,C)
FIX(D,E,F)
%Macro1()
ENDFIX
ENDFIX
FIX(A,B,C)
FIX(D,E,F)
%Macro2()
%Macro3()
ENDFIX
ENDFIX
FIX(A,B,C)
FIX(D,E,F)
%Macro3()
ENDFIX
ENDFIX

Yes, in this case I tested.
The case I had troubles in the past was with accounts wich formula that were dependent on other members with prior involved
I remember something along these lines:
Account1 formula: X + Z;
Account2 formula: @PRIOR(Account1,1,Scenario1:Scenario5);
In the calculation script I had something like:
FIX(Scenario1:Scenario5)
Account1;
Account2;
ENDFIX
And in this case the first time I run the process, Account2 would have no values so I needed to fix scenarios multiple times to solve it.
Thank you for your clarification.

Similar Messages

Essbase Calc Script - Fix inside an IF

Hi,
Is FIX allowed inside the body of an IF?
Appreciate your thoughts.
Thanks,
Ethan.

You can not have a fix inside of an IF but you can have an IF inside of a FIX. It would not make sense to have the first as a fix limits the number of blocks while an If does not. So you would be saying look at all blocks to see in what cases I limit them. If I'm looking at all blocks, how can I limpose a limit on them. In the second case you are saying in the subset of blocks I'l looking at, do I have this condition

ITunes 12 incompatible with Windows Vista Data Execution Prevention FIX

I have been getting a "Vista Data
Execution Prevention" error message whenever I closed iTunes for months
now, and after reading through a few forums, I have found a solution
that works. It only takes two minutes. Long story short:
1) Start iTunes
2) Open the Windows Task Manager
3) Go to the "Proccess" Tab
4) Find "AppleMobileDeviceHelper.exe *32" and right click on it.
5) Select "Properties" from the drop down menu
6) Go to the "Compatibility" Tab
7) Check the Box next to "Run this program in compatibility mode for:"
8) If "Windows XP (Service Pack 2)" is not in the field below, click on the down arrow and select said option.
9) Click on "OK" to close the window.
10) Close the iTunes application
11) Reopen the iTunes application
12) Close the iTunes application again.
At this point you should not see anymore "Vista Data Execution Prevention" error messages when you close iTunes!
P.S.
If you want to go back and de-select running
"AppleMobileDeviceHelper.exe *32" in Windows XP Compatibility mode, you
can. Though this part is totally optional. The next time you close
iTunes, you will get one last "Vista Data Execution Prevention" error
message, but don't worry, it will be the last one. Try opening iTunes
again and then closing it, and TaDa, no more error messages. I don't
know why running AppleMobileDeviceHelper.exe *32 in compatibility mode
JUST ONCE solves the problem, but it worked for me.
Happy new year \o/

Welcome tocguy. If I may ask you a question: How much memory does your Vista x64 PC have? I have 3 GB, which is the maximum that 32-bit Vista can recognize, but I seem to recall that 64-bit Vista can utilize much more than that, and wonder if that might be why 64-bit users are scarce in the 11.2 thread.
I have now also done a truly clean reinstall, deleting Apple folders in ProgramData and each user account's AppData folder, and even the iTunes folders in each user's Music folder. Of course I moved my iTunes Media folder to a safe location first, and one iTunes Library backup file suitable for version 11.1.5. I also cleaned the registry. The most I can say is that I sometimes don't get a BEX upon closing iTunes now, but usually I do. I deselected one default setting during installation, "Use iTunes as the default player for audio files." (If an audio file can be opened by Media Player 11, why would I want to open it in a program that gives me a BEX nearly every time I use it? Too bad my AAC files purchased at iTunes Store can't be opened by WMP, but I certainly won't be buying any more of those now.) My advice to other Vista users: Don't waste your time reinstalling, it won't solve the DEP problem.
Ran the Program Compatibility Wizard to run iTunes in XP SP2 compatibility mode, but abandoned that idea after the first BEX.
Thought I was onto something when I tried the registry fix at http://blogs.technet.com/b/askperf/archive/2008/06/17/to-dep-or-not-to-dep.aspx. Johnny DEP thought he was so slick when he saw iTunes listed as an exception in his DEP tab, but there was one minor problem (yes I did reboot):
Oh well, it's probably a bad idea to allow buffer overruns anyway. The fact that this didn't work causes me to think that Enhanced Mitigation Experience Toolkit or Application Compatibility Toolkit would also be a waste of time. Vista users who wish to avoid BEX errors can either downgrade their iTunes (free) or upgrade their Windows (not free).

Suspend a method execution inside J2EE container

Hi,
I'm implementing a method that sends and resends payment transactions. The method resides in POJO java class and is going to be called from a Session EJB. When the same transaction has to be resent (accoring to some rules), we have to wait several milliseconds before doing it.
I know that threading should not be used directly inside a J2EE container, so what would be the way to implement the waiting before resending a transaction?
Thank you very much.

Yes, I have used java.util.concurrent.Executor in weblogic 10 server.
You can really improve the performance of the EJB application if you use the thread pool carefully with limited size say 100 threads, by creating a single instance of thread pool for the whole J2EE application.
You have to control the life cycle of thread pool using the container's life cycle methods, create the thread pool only once and destroy every time you recycle your app.
Good luck with the implementation :)

Oracle Hyperion Planning 11.1.2.1. hungs Essbase 11.1.2.1.

Hi All,
When end user executing the Calc Manager rule through planning web against our application UPSTPLAN, calc manager rule is getting completed successfully but hangs Essbase application which inturn hangs entire Essbase server.
Sometimes Essbase server is getting hung, while refreshing security from Planning against UPSTPLAN or GA_Plan application.
We recently migrated all of our Hyperion applications from 11.1.1.1.3.1 to 11.1.1.2.1 on new servers.
If anyone came across the same issue.
Thanks,
Sridhar.

Hi,
Thanks for your reply.
Once Essbase got hung, it is not making any entry in the log file.
So we are not able to identify any significant information from log file.
We need to restart OPMN Essbase services to fix Essbase hung issue.
Sridhar.

Help! about process chain execution status

hi:
we nearly have one problem about the process chain execution status,
when error occured during process chian execution, we fixed it in time,
however, even the error repaired, its status still showed yellow, and this
stop the subsequent process to excute.
Any body who can provide some help to solve this problem? thanks in advance
and looking forward to one reply.

Hi ,
Try this method
Open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like
described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Regards,
Ravi

Solution to Errno:7 in MaxL for Essbase Studio redeployment scripts

This is an answer to an archived forum post that I found via a Google search. The forum post no longer accepts replies. The forum post contained an unanswered question about how to resolve "Errno:7" in MaxL in release 11.1.2.3 when trying to redeploy an outline through Essbase Studio.
I encountered the same error in a client environment and could not find any resolution or references to this in the Knowledge Base, patches, release notes, etc.
I wanted to post the resolution that worked for me, in case someone else encounters Errno:7 in MaxL.
In this particular instance, the MaxL "deploy outline" script worked fine until we upgraded 11.1.2.1 to 11.1.2.3. After upgrading, we could still connect to the Essbase Agent via MaxL, but the "deploy outline" script fails with "Not able to connect to BPM Server. Errno:7" and "BPM Connect Status: Error". No evidence of the error could be found in the logs for the Essbase Agent, the Essbase application in question, and Essbase Studio. Using the Essbase Studio Console to redeploy the outline worked fine.
The root cause was learned when we ran the EPM Registry Editor to view a registry report. The report showed that while Essbase Studio was correctly listening on port 5300, the web port was still on the old 11.1.2.1 port (9080) instead of the port 11.1.2.3 was expecting (12080). This port number is not exposed to us if we go back into the EPM Configuration tool and drill down to Essbase Studio. The config tool only allows us to change the relational database connection and the "datafiles" folder location. Running "netstat -na" from the command prompt confirmed that the server was listening to 9080 instead of 12080.
Using the EPM Registry Editor command-line tool to update the port's property value and then restarting the Essbase Studio service fixed the issue for us. If you read the Essbase Studio documentation as I did, you may have had the impression that editing a file on the server would do the trick. But the Readme for Essbase Studio 11.1.2.3 provides the real answer:
"Starting in Release 11.1.2.3, the following Essbase Studio server properties are stored in the
Oracle Hyperion Shared Services Registry database.
The 11.1.2.3 Oracle Essbase Studio User's Guide describes all server properties as being in the
server.properties file. To view or modify the settings in Shared Services Registry, use the
epmsys_registry utility, described in the Oracle Enterprise Performance Management System
Deployment Options Guide."
I hope this helps and good luck!

Hi Santy,
Here's the original forum post: Essbase Studio Cube deployment via MaxL error
In that thread, someone had questioned if an 11.1.2.2 MaxL client could still connect and bypass the error. I happened to have a laptop handy with the 11.1.2.2 MaxL client installed on it and was able to test that. The 11.1.2.2 MaxL client got the error as well.
In my 11.1.2.3 environment I tried both the 32-bit and 64-bit MaxL runtimes and verified both were on the latest available Essbase patch set for 11.1.2.3. Again, they still got the Errorno:7 message. The problem was only fixed after updating the "server.httpPort" property value via the epmsys_registry tool.
Regards,
- Dave

To reinstall Essbase server

We would like to reinstall Essbase server to fix a server performance issue.Can we keep all App and Db to do this or is it necessary to delete all app before?Nota: Essbase 6.5.1 on windows NT 5 environmentThanks in advance

You can reinstall and keep your applications assuming that you are installing to the same location. Follow the following steps:1) Rename bin directory (under /hyperion/essbase) to binold2) Check that there is an Essbase.sec for in this directory3) Run installation. Install to the same location as before.4) After the installation has completed copy the essbase.sec file from binold to the new /hyperion/essbase/binThe key thing here is that you keep your essbase.sec file. This contains security info, license key info and info re. your current applications.Hope this helps.Paul Armitagewww.analitica.co.uk

Determining output type inside the IDOC processing FM

Hi,
When sales order is created, ZXXX is the output type triggered which invokes the function module (FM) IDOC_OUTPUT_ORDRSP to send the IDOC. My question is how do we know which output type got triggered the execution inside the FM?
My requirement is to do some calculation only for ZAAA inside the FM IDOC_OUTPUT_ORDRSP but this same FM is triggered by many output types ZXXX, ZXYZ, ZMNO. So I want to know which output type triggered the FM. Hope I make it clear.
Thanks,
Sakthi.

dossgs
An import parameter of FM IDOC_OUTPUT_ORDRSP is the structure named OBJECT (like NAST). OBJECT-KSCHL is the message type (output type).
Regards,
zKen

I type from Brazil - like shifting the sql in time of execution

Hi, friend�s
like shifting the sql in time of execution inside of the netbeans
Thank�s
I Type from Brazil and you ?

Hi!
I don't understand your question? Do You want to know how to change SQL query in runtime?
Thanks,
Roman.

Teststand Multi UUT execution Timing

Dear All,
I am working on Multi uut testsystem where I have to tests 5 UUT in parallel, I am using Labview adapter,with Batch process model and testing energy meters where I have hardware suitable for 5 UUT. My question is My execution timing for 1,2 .And 5 uut at a time is different, Ex.. I an getting 1 UUT tested in 5 minutes and when I starts testing when I start testing 2 UUT at the same time My total execution time for same steps and sequence increases to 7 minutes.
Pl suggest how I can achieve same timing which I am getting for single UUT for more than one UUT execution.

Doug, I have shared hardware and it is source calibrator for current and voltage which is wired in parallel to all 5 UUT so that it can source to all UUT at the same time.My report generation is disabled and there is no on-fly report ON.I am doing my report generation using the one labview VI where I formatted report at the end of tests so while running the tests report generation not involved.I have around 65 steps in one sequence which made for calibration.
To get same time of execution for 5 UUT as single UUT do I need to make my labview code module as reentrant? or do I need to make multi thread in labview vi code module like each socket will have separate loop execution inside the VI.? attaching here .seq file for your reference
Attachments:
PM5350 Multi UUT Test.seq ‏88 KB

OdiWaitForChildSession Name filter in paralele execution

Hi,
we are using ODI version 11.1.1.6.
For parallel execution of child interfaces, we will be using interface scenarios set to asynchronous mode execution inside the package using java api's.
For example:
-master interface
-child1 interface scen in async mode
-OdiWaitForChildSession1
-Child2...child5 interface scenarios in async mode
-OdiWaitForChildSession2
For OdiWaitForChildSession here, we have used these parameters:
"-POLL_INT=1"
"-MAX_CHILD_ERROR=1"
Kindly let us know if ' Name Filter' or 'keywords' also need to be set in such cases where we are using more then 1 OdiWaitForChildSession or it should work fine if we have ' Name Filter' or 'keywords' set as null.
Thanks!
-Anuradha

Hi,
I have used StepOdiCommand with the following expression set to that.
have set the stepname to 'odiWaitForChildSessionStep' in StepOdiCommand constructor.
LanguageProviderImpl langImpl_new=new LanguageProviderImpl(odiInstance) ;
ExpressionStringBuilder expBuilder = new ExpressionStringBuilder(langImpl_new.getDefaultSnpsLanguage());
expBuilder.append("OdiWaitForChildSession ");
expBuilder.append("-POLL_INT=1");
expBuilder.append(" -MAX_CHILD_ERROR=ALL");
Expression exp = expBuilder.toExpression();
StepOdiCommand stepCommand = new StepOdiCommand(odiPackage, "odiWaitForChildSessionStep" );
stepCommand.setCommandExpression(exp);
-------------------

Error running managed code inside DllMain or image initialization

I have a LabView 7.1 DLL, and am calling it from a Visual C++ application. I load the DLL dynamically at runtime using LoadLibrary. When I call the function, I get this:
<mda:msg xmlns:mda="http://schemas.microsoft.com/CLR/2004/10/mda">

<mda:loaderLockMsg break="true"/>
</mda:msg>
in the Visual C++ debug window.
I have been through the pages on this website about creating LabView DLLs and calling them. I have also created very small vi's and exported them, but with the same error. I have uninstalled LabView 7.1, and reinstalled it.
Any ideas?

Hi
What version of C++ are you using?
If you could you post your small VI and associated code I will have a look at it and see if I can get it running with out any errors.
You said you have looked at some help material on the website. Have you tried any of the example pieces of code?
Here is a link for one.
Calling a LabVIEW DLL in Visual C++ that Passes Array Handles by Reference
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=D67C2540A4CE3182E034080020E74861&p_...
See if you can run this with out any errors if you still get the same error with this please let me know
Regards
Tim
AE NI UK and Ireland

Problems w/ Essbase 9.3.1 Installation

Hi, I am new to essbase. i have installed shared services, essbase server, and admin services to a winxp machine. after going thru all the steps in the config util and deploying all services to tomcat, rebooted machine, and started all services (shared services, ldap, bi+ analytics, and admin services), I wasn't able to see the essbase server inside shared services. the only component i could see inside shared services project folder is "business rules." if the installation was done properly, i should be able to see "Analytic Server:Servername" inside the project folder in hss. Also, I could not see the essbase server w/in the admin svc console. would anyone know what i have done wrong in the installation? i can't seem to get past this point.
when i first install, i installed in this order: hss, eas, essbase server. then i uninstalled and reinstalled in this order: hss essbase server, eas. however, i noticed that the tomcat component and settings remained and not all the directories were deleted. after second installation, it looked like there were leftover setting from 1st time installation. any suggestions? would really appreciate help w/ this. thx.
ken

Hey,
looks like we have many experts on the Essbase Excel Add-in here.
I have a problem that I haven't been able to resolve:
When I use the Essbase Menu in Excel to connect to the Essbase cubes, the login screen comes up and after all credentials are provided and the OK button is clicked all accessible cubes are displayed but after selecting a cube and clicking on OK the login portal does not go away.
It just stays there and the excel is not connected to the server.
I'm using Essbase Excel addin version 9.2.1, and I have already tried out un-installing and re-installing the Excel Addin.
Please help me out here, I have no clue whats going on.
Regards,
Anindyo

The client timed out waiting to connect to the Essbase Server using TCP/IP

Hi,All
When I deploy the HPCM application to essbase, i received the following message below in the log file hpm.log
2009-02-20 13:34:50,389 [Thread-115] ERROR com.hyperion.profitability.business.mdb.deployment.cubegeneration.CubeGenerator: error setting measures dimension member properties
com.hyperion.profitability.data.mdb.essbase.MDBException: Error setting member property share option to store_data for member: D0900SB
     at com.hyperion.profitability.data.mdb.essbase.MDBMember.setShareOption(MDBMember.java:413)
     at com.hyperion.profitability.business.mdb.deployment.cubegeneration.CubeGenerator.setMemberProperties(CubeGenerator.java:1232)
Caused by: com.essbase.api.base.EssException: (1290001): Network Error [10061]: Unable To Connect To [hypeion:32776]. The client timed out waiting to connect to the Essbase Server using TCP/IP. Check your network connections. Also please make sure that Server and Port values are correct
     at com.essbase.server.framework.EssOrbPluginDirect.ex_olap(Unknown Source)
     at com.essbase.server.framework.EssOlapMetaDataService.ex_olap(Unknown Source)
And the Essbase service is up.
Pls help!
Shen.

If you are installing on Windows, there is a limitation in the default configuration of TCPIP. I wrote about it, and included the steps to fix it, on my blog at http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html.
Note the error number you reported is slightly different than what I write about in the blog, but I believe I have seen this error fixed by the blog steps..
Tim Tow
Applied OLAP, Inc

Essbase execution inside fixes

Similar Messages

Maybe you are looking for