Establishing Quality system for EP on same Development machine???

Hello Experts,
We have installed CRM5.0 and EP7.0 on same machine. For EP we have ABAP + JAVA stack. We create EP users in CRM (client 100) after that we assign roles and permissions in EP. This is our development server.
Now for CRM we have created a client 200 on the same machine that we are going to use as quality server for CRM.
We want to use the same client for EP as well for quality check. I want to know how we implement this scenario (Implementing quality server on the same development server) and what all the dependencies we have?
Please help me to finalize the things.
Thanks !!!
Amit

Hi Suzanne,
CR for VS 2010 and CR for VS 2012 are not different products. Its the same product called as
SAP Crystal Reports developer version for Microsoft Visual Studio which works with VS 2010, VS 2012 and VS 2013.
Yes, you could install VS 2010 and VS 2012 on the same machine and then simply install CR_VS_13.0.10.exe (SP10) from above link. This will integrate with both VS 2010 and VS 2012.
You could develop your apps saparately with both VS versions however the CR assembly references would be the same for both VS apps as its is the same CR version.
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

Similar Messages

Using cr for vb 2010 and cr for 2012 on same development computer

I have applications in vb.net 2010 and am going to install vs 2012 on the same development machine. Can I continue to create reports for 2010 and 2012 on same development machine. Will I then have both cr for vs 2010 and cr for vs2012 on the same development machine with separate references to each vb.net version. Is that correct? Both visual studio versions will now be using the framework 4.5 as I understand when both are installed on same machine. Is there anything regarding this that would involve separate steps installing Crystal?
Is there anything else I need to do regarding crystal in terms of installation that would be different? I know there was a problem with having vs 2008 and vs 2010 with the different crystal versions on the same development machine . I gather this is not the case now?
Thanks

Hi Suzanne,
CR for VS 2010 and CR for VS 2012 are not different products. Its the same product called as
SAP Crystal Reports developer version for Microsoft Visual Studio which works with VS 2010, VS 2012 and VS 2013.
Yes, you could install VS 2010 and VS 2012 on the same machine and then simply install CR_VS_13.0.10.exe (SP10) from above link. This will integrate with both VS 2010 and VS 2012.
You could develop your apps saparately with both VS versions however the CR assembly references would be the same for both VS apps as its is the same CR version.
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

Correct No. of Accounts and their Privileges for Installing SharePoint 2013 Developer Machine

Hi Dear SharePoint 2013 Experts,
I request you to kindly guide like; the Correct No. of Accounts and their Privileges for Installing SharePoint 2013 Developer Machine. Is there any step by step blog or Video on "Installing SharePoint 2013 Developer Machine".
Tried Installing ALL in one single Virtual Machine using account spDeveloper (which is a Member of "Administrators" and "Domain Admins" Group(s). Any kind of SharePoint Web-Application and/or Sites (Developer-Site, Team-Site, ....) can
be created including MySites and Intranet Sites.
But when tried creating SharePoint App Project in Visual Studio 2013 and deploying, stuck here with 2 weird Issues like;
1. This task requires the application to have elevated permission
2. Error occurred in deployment step 'Install App for SharePoint': The System Account can not perform this action
If Visual Studio 2013 is run NORMALLY (WITHOUT 'As Administrator'), it throws above 1st error - "This task requires the application to have elevated permission"
Because of the above 1st Issue, if the Visual Studio 2013 is run 'AS ADMINISTRATOR', it again throws an error (2nd error) - "Error occurred in deployment step 'Install App for SharePoint': The System Account can not perform this action"
How to over cum this "chicken and egg problem"??
Regards,
developementsharepoint

Hi,
Have you had a look at the TechNet guidance for configuring SharePoint and SQL on a single server? It's here: http://technet.microsoft.com/en-us/library/cc262243(v=office.15).aspx
There is also a good TechNet wiki article on creating a SharePoint dev environment here,
http://social.technet.microsoft.com/wiki/contents/articles/19178.sharepoint-2013-setting-up-a-dev-environment-one-piece.aspx and here http://social.technet.microsoft.com/wiki/contents/articles/15289.sharepoint-2013-creating-a-development-environment.aspx
Regards, Matthew
MCPD | MCITP
My Blog
View
Matthew Yarlett's profile
See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos

Error While transporting Crystal Reports from BW DEV to Quality System

Hi.
I have developed a crystal report using the SAP menu. We saved the report to SAP BW dev server using the SAP menu and published it to BOE.
Now i want to transport my Crystal report to Quality system, I followed the same mechanism to transport crystal report which are aplied to other BW objects, but when i am trying to transport its giving me a short dump error:
The error appears something like this:
Error in the ABAP Application Program
The Current ABAP program u201CSAPLRSCR_CEu201D had to be terminated because it has come across a statement that unfortunately cannot be executed.
Function module u201C/CRYSTAL/PUBLISH_REPORTu201D was called
With the parameter u201CI_REFRESH_FOLDER_INFOu201D.
This parameter is not defined.
This is first time i am transporting any crystal report to other bw system.
Is there any document for transporting Crystal reports, I had searched SDN but didnt got any relevant documents.
or is their any setting which need to be done in BW side.
Any help will be appriciable.
Thanks
Anish

Hi,
I would suggest you open a case with support so that they can look at your system. In general you should be able to transport the Crystal REports object in the same way you transport a Bex query.
ingo

Error while transporting Crystal Report from BW dev to Quality system.

Hi.
I have developed a crystal report using the SAP menu. We saved the report to SAP BW dev server using the SAP menu and published it to BOE.
Now i want to transport my Crystal report to Quality system, I followed the same mechanism to transport crystal report which are aplied to other BW objects, but when i am trying to transport its giving me a short dump error:
The error appears something like this:
Error in the ABAP Application Program
The Current ABAP program u201CSAPLRSCR_CEu201D had to be terminated because it has come across a statement that unfortunately cannot be executed.
Function module u201C/CRYSTAL/PUBLISH_REPORTu201D was called
With the parameter u201CI_REFRESH_FOLDER_INFOu201D.
This parameter is not defined.
This is first time i am transporting any crystal report to other bw system.
Is there any document for transporting Crystal reports, I had searched SDN but didnt got any relevant documents.
or is their any setting which need to be done in BW side.
Any help will be appriciable.
Thanks
Anish

Hi,
I would suggest you open a case with support so that they can look at your system. In general you should be able to transport the Crystal REports object in the same way you transport a Bex query.
ingo

CHARM error - No Target system for Normal transport generated from another client

Hi Gurus,
This is regarding normal change. We have two clients in development. (Workbench and Customizing)
We were trying to do Automatic import from development client to Quality. When importing the job, I’m getting an error related to Project Status switch. "you cannot import any request for the project at the moment" It works fine for another development client and we can see the target system in Project status switch.
But, checking the Project Status switch, looks like there’s no Target System defined for Normal transport generated from another client of development.
I attached some screenshots related to this.
Can you please help how to add a target system for another client of development ?
Regards,
Salman

yes, client 110 is present in the task list of the project. yes route is defined because it is working for urgent change

0CRM_OPPT_H Datasource in CRM Quality system.

Hello BW Experts,
We are using 0CRM_OPPT_H Datasource in our CRM extracts. We are facing an issue with 0CRM_OPPT_H datasource in CRM Quality.
We are able to extract data into BW Quality system for this datasource without any issue. Both FULL and Initialization loads are successful to BWQuality. But when we check extractor checker (/nrsa3) for this datasource in CRM Quality, we are getting 0 records. The extract checker in CRM Development for this datasource is returning us some records.
I am sure that we don't need to run any Setup tables for this datasource. We have this datasource as active in BWA5 tcode in CRM Quality. Can someone please let us know how to fix this issue?
Thanks,
Naveen.

upps sounds crazy....extractor works fine if called from BW system, whereas zero records if directly run via RSA3.
Check various option for FULL/DELTA, any filter value.
I will also reactivate the datasource (if you are allowed to do in QA) via RSA5, and then try to run it using RSA6 (execute button).
Yes you are right there is no concept of set up table in CRM Opportunity.
Thank-You.
Regards,
VB

Unable to load the data into Cube Using DTP in the quality system

Hi,
I am unable to load the data from PSA to Cube using DTP in the quality system for the first time
I am getting the error like" Data package processing terminated" and "Source TRCS 2LIS_17_NOTIF is not allowed".
Please suggest .
Thanks,
Satyaprasad

Hi,
Some Infoobjects are missing while collecting the transport.
I collected those objects and transported ,now its working fine.
Many Thanks to all
Regards,
Satyaprasad

How to create common file systems for both development & quality systems

Hello Team
Need some calrification & advise
we are planning to install ECC6 with EHP5 on AIX7.1 with DB2 9.7 version on single physical server ( NO Virutal IP'S) for both development(SID : D10 & System number 20) & quality(SID : Q10 & System number 20) systems.And it will be running in single LPAR for development & quality systems.
please advise me how can we create the below common file systems for both development & quality to avoid file permission & installation issues.
/sapmnt/<SID>
/usr/sap/
/usr/sap/trans/
/db2/IBM
Thanks in advance & Regards
BM

Thanks you Juan for your response
We are planning for seperate DB instance only.
what could be the owner(UID) & group(GID) for the below file systems
/sapmnt/
usr/sap/
usr/sap/trans
Thanks in advance
BM

Issue in Process Controlled workflow for Shopping cart in Quality system.

Hello All,
I ahve configured a Process controlled workflow in SRM 7.0 with custom resolver, and I am facing an issue taht the Workflow works well in Development but in Quality the approvers are dropped after SC is ordered in Quality system.
The SC Workflow drops the approvers picked up from the Interface method /SAPSRM/IF_EX_WF_RESP_RESOLVERGET_AREA_TO_ITEM_MAP and IF_EX_WF_RESP_RESOLVERGET_APPROVERS_BY_AREA_GUID of BADI /SAPSRM/BD_WF_RESP_RESOLVER. The approvers can be seen in the shopping cart Approval preview Tab until the SC is ordered.
I have compared the OSS notes relevant for Workflow, all of them have been transported, Also I compared and checked general Workflow settings, BRF Config and Process level settings in Dev and Quality, everything is same.
Also while debugging; the approvers can be seen in the decision set table in the create_process_forecast method of class /SAPSRM/CL_WF_PROCESS_MANAGER.
Kindly let me know what else i can check to find the root cause.
Thank you in advance for help!
Regards
Prasuna.

Hello Vinita;
Thanks for the input and sorry for the not so "ASAP" reply;
From what I'm seeing in from your 2 screenshot, i strongly believe that the problem is even before the Z implementation /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID (in which the FM i ZSRM_GET_USER_FROM_PGRP is called. I think the problem could be in the process level determination ZSRM_WF_BRF_0EXP000_SC_APP100. Let me explain:
In your cases where not buyer is determined, in the approval tab there is not even a process level for buyer approval. If the problem were indeed in the implementation /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID then the process level would be there, but the system will display, instead of the name of the buyer(if the buyer determination fails) a red label with the message: "With the strategy "Buyer determination" an approver could not be determined (or something like that..please check the image at the end of the text)".
I can propose a way to discard this: Implement the method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_FALLBACK_AGENTS of class ZCL_BADI_SC_WC (in case you didn't know, in this method you can specify an "default" approver in case that the determination of approver in GET_APPROVERS_BY_AREA_GUID fails). The idea is to specify an default approval and see how it behaves:
If the user you indicated in the method GET_FALLBACK_AGENTS appears as approver, then yes, the problem is arises from implementation GET_APPROVERS_BY_AREA_GUID, in which case it could be a data problem (peharps in pposa_bbp?). You could also check in TX SU53 with the users with this problem to see if there's a missing authorization objetc.
If, in the other hand, the "default" approver is not shown, it means that the process level buyer determination is not even called, so you should check in more detail ZSRM_WF_BRF_0EXP000_SC_APP100 and /SAPSRM/CL_WF_PROCESS_MANAGER > Determine process restart –method ----- (i have never used this method, so i could not tell if it could be the source of the problem).
Also, you could implement the method GET_FALLBACK_AGENTS in this way so the default approver would be the WF administrator indicated in the customizing (or you could just append directly any user you want):
METHOD /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_FALLBACK_AGENTS.
   DATA: lv_admin_expr TYPE swd_shead-admin_expr,
         lv_admin      TYPE swd_shead-wfi_admin,
         lv_admin_type TYPE sy-input,
         ls_agent      TYPE /sapsrm/s_wf_approver.
   CALL FUNCTION 'SWD_WF_DEFINITION_ADMIN_GET'
     IMPORTING
       default_admin_expr = lv_admin_expr
       default_admin      = lv_admin
       default_admin_type = lv_admin_type.
   ls_agent-approver_id = lv_admin.
   APPEND ls_agent TO rt_agent.
ENDMETHOD.
Error of agent determination:
Please let me know the result of the test with the implementation of method GET_FALLBACK_AGENT. By doing this we could ensure if really the problem is in method GET_APPROVERS_BY_AREA_GUID or before. I just made the test in our system and I'm almost sure that you wont get the default approver, but i could be wrong.
Any question please let me know.
Best regards
Cristian R.

Strange behaviour of Removal of Alpha for Info object in Quality system

Strange behaviour of Removal of Alpha for Info object in Quality system as compared to Development system.
Hi,
The data for an info object Key in the DSO was 00000000000000000000000000123. I removed Alpha for the info object and data was corrected to 123 in the DSO in development system.
Now, when i transported the info object without alpha to quality and loaded data into DSO, the data is still the same with leading zeros.
I dont want to write routine to remove leading zeros, as I have values as 0. If i write routine, all zeros will be removed and this will be blank.
Both development and quality have same patches applied and are on same level.
Why is this strange behaviour in quality system...
Any inputs?? please suggest.
Thanks.
Lavanya

Hi,
Did you drop and reload the data after changing the conversion?
Regards,
Raghavendra.

Transporting issue from Developement System to Quality System

Hello Experts,
We are facing a problem in which address details in developement system are getting displayed and when the same code is transported to the quality system then the address fields are not getting displayed.
While debugging we found out that there is a variable which is calling the view (responsible for displaying address fields) in the developement system but the same view is not called in the Quality System.
We tried all sorts of backtracking but could not find where the variable is getting the values from.
Kindly Guide.
Regards
Sanket Jain
Edited by: Jain Sanket on Mar 22, 2011 3:57 PM

Hi BW Star,
I am transporting a process chain for deleting ODS change log from dev system to quality system. It is working fine in the dev system, but when transported to quality system, its process variants becomes empty for all the included ods change log delete steps. object_type and object_name field in variant becomes empty.
Thanks for your help.
Regards,
Shankar

WSUS Sync is not working Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote

I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Hi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Installing data quality management for sap for multiple sap system

Hello folks,
I have an Requirement where i need to install data quality management for sap in multiple sap system.
I have installed it successfully for one system .
here my data services is installed in one server with rfc server as windows services in same server.
i have done the required configuration in ecc side.
my question is how do i use same data services jobs which are configured as real time services for both my sap connection?
in simple terms how do i installed dqm for multiple sap system having single data services server.
thanks,
Shubhangi.

Hi Vishal,
Regarding DQM Please refer the below Link.
Links:
http://scn.sap.com/community/data-services/blog/2013/07/18/i-installed-dqm-for-sap-you-can-too
or you can also refer below SNotes given by SAP:
1732816 - How to manually import DQM ATL files correctly after failed install
Note 1732816 - DQM Adapter Dataflow installer fails on Data Services 4.1
Links:
https://service.sap.com/sap/support/notes/1732816
Thanks,
Daya

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details?

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details? (In order to be able to use the older applications no longer supported in 10.9)

If you want to add a second partition to the internal drive (in Disk Utility, select the drive, then open the partition tab and just click the + button), you should first be sure that you will have enough room to accommodate whatever the second volume will be. I am currently doing this for Snow and Mountain Lion.
To get to whatever volume is not the startup disk, restart and hold down option/alt at the chime, which will bring up a selection of the two volumes. Use the left or right arrow keys to select it and then hit enter/return.

Establishing Quality system for EP on same Development machine???

Similar Messages

Maybe you are looking for