Estimate form for my window cleaning service
Hello
Thanks in advance for help , I really enjoy being a Mac user , I would like to build website for my window cleaning service . Trying to figure out if I could create a form where user views pictures of window types and enters number of windows then it totals price for each type of window , and creates estimate.
Complicated stuff!
Have a look at this to see what a service does for you....
http://www.socketapp.com/features/online-quote-form-builder/
Similar Messages
-
WCF service application hosted in IIS for reading Windows server service bus topic/subscription
We have a WCF service application(not web application) which is deployed in IIS 8 pointing to the windows server service bus topic/subscription. We have configured the WCF service with applicationInitialization feature of IIS 8 to warm up.
But the WCF service is not reading any message from the topic/subscription.
configured in web.config file as below
<system.webServer>
<applicationInitialization>
<add initializationPage="/MyService.svc" />
</applicationInitialization>
</system.webServer>
When we run the same from visual studio its reading messages from topic/subscription.
any configuration/settings which we are missing?You probably didn't initialize correctly the auto-start. Btw. I would recommend you to use AppFabric for this feature. It is more transparent in development and production.
Please take a look on following posts:
http://social.technet.microsoft.com/wiki/contents/articles/1284.host-wcf-services-with-service-bus-endpoints-in-iis-and-windows-server-appfabric.aspx
http://developers.de/blogs/damir_dobric/archive/2009/10/11/iis-7-5-and-always-running-web-applications.aspx
http://developers.de/blogs/damir_dobric/archive/2010/06/11/appfabric-issue-with-aoutostart.aspx
Damir Dobric
developers.de
daenet.de
daenet.eu
daenet.com -
Essential System Updates for Microsoft Windows Vista Service Pack 1 (SP1)
Hi, I want to know if this is applicable to sp2 as well. I don't know why there is not one for sp2. I have a hpg60 laptop and this is listed on the drivers page.
This question was solved.
View Solution.It is just a rollup of Vista updates. All are included in SP2 so you can forget about it. Just apply SP2 (as you did) and run a full MS update and you will be fine.
-
ThinkVantage System Update Patch for Microsoft Windows Vista Service Pack 2
FYI:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-72758&selectarea=SUPPORT&tempsel...Small warning: This too is contains a flaw and doesn't install on certain systems.
http://forums.lenovo.com/lnv/board/message?board.id=Special_Interest_Utilities&view=by_date_ascendin... -
Toshiba Support for Microsoft Windows Service Packs ?
Does Toshiba provide Downloads,
for the Microsoft Service Pack
( For example Windows XP Service Pack ) ???The easiest way for you to find Information about Windows Service Packs is to surf on the Toshiba Website of your Country and look at Support & Download.
There you find the a Category Microsoft Service Packs.
The Link for Toshibe Europe for example is -> http://eu.computers.toshiba-europe.com/ -
Windows 7 very slow logon, Waiting for the User Profile Service, winlogon event 6006
Hello,
Every so often one of our Windows 7 clients which is not normally having any delay at logon will take a very long time to login. This may be 10 or 20 minutes or up to an hour in some cases.
Typically the event log will contain entries like
The winlogon notification subscriber <Profiles> took 572 second(s) to handle the notification event (Logon).
There is no further information available from Event Log Online Help, nor any additional detail as to why the logon event was so slow. During the delay the user will just see "Waiting for the User Profile Service" on their screen.
We first started seeing this problem with Windows Vista and if anything the situation has not improved since then. It has never happened with any of our Windows XP users.
We are currently planning a migration of computers to Windows 7 but stuff like this which has not been resolved in Windows over a 2 year period will stall that migration. The least improvement is to increase the event notification to give a lot more
information on why the user profile processing has stalled.Hi,
When did the issue begin to occur? Did it occur after installing certain application or applying certain policy?
To troubleshoot the issue, please perform the following step.
1. Restart the machine in Safe Mode with Networking to check whether the system can login quicker.
2. Type “gpedit.msc” in Search box and press Enter. Navigate to the following location:
Computer Configuration->Administrative Templates->System->Logon
Please double click “Always wait for the network at computer startup and logon” policy and disable it.
3. Perform a
Clean Boot to check the result.
Thanks,
Novak -
I've read through quite a few post and ran the MGADiag on the system in question.
I tried turning Auto update on and off, rebooted, removed a ton of malware, and have scanned multiple times using Hiron's to make sure it's clean. After all that, it still gets the exact same error referenced in the subject line. At this point I'm in serious
contention to do the 'upgrade' to repair the OS. Windows 7 Home Prem OA is listed on the tag attached to the tower.
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-QCPVQ-KHRB8-RMV82
Windows Product Key Hash: +Rj3N34NLM2JqoBO/OzgzTZXgbY=
Windows Product ID: 00359-OEM-8992687-00095
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {52F22272-F1FB-40AD-A49B-A0AB96812A14}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.120330-1504
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Users\Lisa\AppData\Local\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{52F22272-F1FB-40AD-A49B-A0AB96812A14}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010300.1.0.003</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-RMV82</PKey><PID>00359-OEM-8992687-00095</PID><PIDType>2</PIDType><SID>S-1-5-21-1500778237-1240944580-2367651401</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Inspiron 620 </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A10</Version><SMBIOSVersion major="2" minor="6"/><Date>20130222000000.000000+000</Date></BIOS><HWID>C8B03707018400FE</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Eastern
Standard Time(GMT-05:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL </OEMID><OEMTableID>WN09
</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, HomePremium edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800095-02-1033-7601.0000-0322012
Installation ID: 002473118260879346938185562304514293817714094756319536
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: RMV82
License Status: Licensed
Remaining Windows rearm count: 3
Trusted time: 4/11/2014 12:02:15 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
HealthStatus: 0x0000000000000000
Event Time Stamp: 2:16:2014 04:36
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: NAAAAAEABAABAAEAAAABAAAAAwABAAEA6GFY1/Dp1hTgzErdYjS6HJxXpBFKktSdHC4ucw==
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC DELL WN09
FACP DELL WN09
HPET DELL WN09
MCFG DELL WN09
SSDT AMICPU PROC
SLIC DELL WN09
OSFR DELL M08Hi,
Are all services enabled? including Windows Update service, Background Intelligent Transfer Service and？
If they are, you should reset windows update component.
http://support.microsoft.com/kb/971058
Andy Altmann
TechNet Community Support -
Windows 7 Service Pack 1 for x64-based Systems (KB976932)
After failed attempts to install Windows 7 Service Pack 1, I ran this HotFix
Hotfix for Windows (KB947821)
Installation date: 2/18/2014 1:41 PM
Installation status: Successful
Update type: Important
Fix for KB947821
More information:
http://support.microsoft.com/?kbid=947821
Help and Support:
http://support.microsoft.com
And, now I have multiple copies of Windows 7 Service Pack 1 installed and, the computer wants to continually install another copy upon Shutdown.Hi,
Are you refering to this KB?
KB947821
Fix Windows Update corruption errors such as 0x80070002 and 0x80070057
Could you please have a share with the error messages that shown after SP1 failed to install?
And, now I have multiple copies of Windows 7 Service Pack 1 installed and, the computer wants to continually install another copy upon Shutdown.
Do you mean the computer wants to continually install another copy every time when shutdown?
Please make sure we have enough space in the system drive(where the system OS installed), perform a cleanup of that drive(ensure we have ), then take a try to boot into
clean boot and install SP1 manually, download fron here:Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
Best regards
Michael Shao
TechNet Community Support -
Adobe Interactive forms for Managerial self service
Hi All,
We need Adobe Interactive forms for Managerial self service in Portal.
When i goto transaction SFP, and check any of the interactive forms ie ISR_FORM_SPEG for example, and click the Layout button, i get the blank form, even the PDF format shows me a blank page.
Has anyone faced a similar problem? If so, can you please tell me the reason for this error and how to rectify it?
Thanks in advance,
AditiHi Pavan,
Thanks for replying..i found a note (843279) which has a similar problem as mine..it says logon as "DE" and then copy the form . When i do that, i get a popup window asking me userid and password for Adobe configuration services, which means i need to check whether Adobe configuration is proper or not.
Ill do that and see how things proceed.
Thanks,
Aditi -
Rescue And Recovery On Clean Install Of Windows XP Service Pack 2
Hey,
I have recently purchased a refurbised IBM ThinkPad T40 2373-82M laptop computer. When I received the computer it did not have any recovery partition or recovery CD's that came with it. I then installed my own personal copy of Windows XP Service Pack 2 on the machine and installed drivers and applications individually by downloading them off the Lenovo support website. However, I have attempted to install the latest version of the ThinkVantage Rescue And Recovery Program (Version 4.20) on my computer but I end up with the following error: 'There is not enough free space on the computer to install or upgrade the Rescue and Recovery environment'. When I did a full clean install on the system I deleted all partitions that were on the computer at the time during the Windows XP installation and made a single NTFS partition. There were two 20GB partitions on the hard drive when I bought it, but neither of them were the IBM Rescue and Recovery partition. Could it be possible for me to install this software on my laptop, and make a Rescue and Recovery partition, now and make it the same way it would of been when it left the IBM factory?
Any help would be greatly appreciated.
Cheers
Ash.asin123 wrote:
I hope this solution is easy to follow and helps anyone who has had the same problems as me.
Thanks for coming back and sharing the solution with others!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! -
Rescue And Recovery Installation On Clean Install Of Windows XP Service Pack 2
Hey,
I have recently purchased a refurbised IBM ThinkPad T40 2373-82M laptop computer. When I received the computer it did not have any recovery partition or recovery CD's that came with it. I then installed my own personal copy of Windows XP Service Pack 2 on the machine and installed drivers and applications individually by downloading them off the Lenovo support website. However, I have attempted to install the latest version of the ThinkVantage Rescue And Recovery Program (Version 4.20) on my computer but I end up with the following error: 'There is not enough free space on the computer to install or upgrade the Rescue and Recovery environment'. When I did a full clean install on the system I deleted all partitions that were on the computer at the time during the Windows XP installation and made a single NTFS partition. There were two 20GB partitions on the hard drive when I bought it, but neither of them were the IBM Rescue and Recovery partition. Could it be possible for me to install this software on my laptop, and make a Rescue and Recovery partition, now and make it the same way it would of been when it left the IBM factory?
Any help would be greatly appreciated.
Cheers
Ash.
Message Edited by asin123 on 04-04-2008 10:45 PM
Moderator Note; Please do not duplicate posts - Thread locked.
Message Edited by andyP on 04-04-2008 02:11 PMasin123 wrote:
I hope this solution is easy to follow and helps anyone who has had the same problems as me.
Thanks for coming back and sharing the solution with others!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! -
"Invalid printer specified" for 32bit Windows Service in 64bit Server
Hi All,
I'm having some issues with crystal reports.
My development environment:
Visual Studio 2008, 32bit Windows XP
Running environment:
Windows Server 2003 Service Pack 2 64 bit
Crystal Reports Basic Runtime for Visual Studio 2008 (x86)
I've created two applications: one is console application and one is windows service. Both application run same codes to print crystal reports to printers and run at 32 bit. I can have multiple instance of console application running without any issues. When I run the windows service version, the first time the service works fine. But after I restarted the windows server, the crystal report throw Sysstem.Runtime.InteropServices.COMException.
The detail of the exception is:
System.Runtime.InteropServices.COMException (0x80000201):
Invalid printer specified.
at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal)
at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)
at Company.PrintReport(ReportClass report, String printerName)
Both console application and windows service run at 32 bits. The user runs the service is domain controller who has admin permission. And the same problem happened on an web application hosted on IIS of the same server.
What I've done so far:
1. Set the printer option in the report to no printer
2. Try install the crystal report x64
3. For the windows service build for x86.
Please some one help me in this.
CheersThat is a rather strange issue.
Make sure you are killing the report object once you're doen with it. E.G;
Dim report as New ReportDocument
Protected Sub Page_load()
End Sub
Private Page_Unload()
report.close()
report.dispose()
GC.Collect
End Sub
//C# (on form open):
private void WebForm1_Init(object sender, System.EventArgs e)
if (boReportDocument != null)
boReportDocument.Close();
boReportDocument.Dispose();
GC.Collect();
// C# on form close
private void Page_Unload(object sender, EventArgs e)
if (boReportDocument != null)
{ boReportDocument.Close();
boReportDocument.Dispose();
GC.Collect();
If closing and disposing does not help, is htis happening on your dev computer or after you move that app to another server? -
What do i do about microsoft drm plugin update for windows 7 service pack 1?
what do i do about microsoft DRM plugin update for windows 7 service pack 1? Do I even need it for my computer? It says next to the download button (to the left) that it is out of date.
Hi,
Are you refering to this KB?
KB947821
Fix Windows Update corruption errors such as 0x80070002 and 0x80070057
Could you please have a share with the error messages that shown after SP1 failed to install?
And, now I have multiple copies of Windows 7 Service Pack 1 installed and, the computer wants to continually install another copy upon Shutdown.
Do you mean the computer wants to continually install another copy every time when shutdown?
Please make sure we have enough space in the system drive(where the system OS installed), perform a cleanup of that drive(ensure we have ), then take a try to boot into
clean boot and install SP1 manually, download fron here:Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
Best regards
Michael Shao
TechNet Community Support -
I am using a window 7 professional service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but the seller did not send me any installation CD or instruction
on how to use it.
Please how can I use it on my window 7 professional service pack 1.
Thank you.Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server. I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008.
http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
Here is a lab guide for 2012 -
http://technet.microsoft.com/en-us/library/jj134160.aspx
But, the explanation of your environment begs the question - what are you trying to do? You say you have a desktop OS and you are talking about Windows Server products. In that light, your question does not make a lot of sense.
. : | : . : | : . tim -
Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.This thread is pretty old, are you still having this issue?
Maybe you are looking for
-
TMADMIN_CAT:188: ERROR: Error while obtaining the Bulletin Board parameters
Hi ,everybody When I created and configured a App server domanin with PSADMIN, these errors below occurred,but log files didn't have useful info: PeopleSoft Domain Boot Menu Domain Name: HCMDOM 1) Boot (Serial Boot) 2) Parallel Boot q) Quit Command t
-
Can I load songs and photos into an Ipod Nano I have purchased as a gift?
I have purchased an Ipod Nano 2GB as a gift for my 9 year old granddaughter for Xmas. Before sending it I'd like to load some songs & photos on it, from my own Ipod Library and computer. I'm concerned that doing this from my computer will only compli
-
Prioritize data on one SSID on an autonomous AP with multiple SSIDs
Hello, I have a standalone AP(AP1261N) which is configured with 3 SSIDs.I would like to prioritize any data flow on SSID 1 for example so that users on SSID 1 are always functional independent on what is happening on the other SSIDS. Then have the SS
-
I have a check box that was added thru iterator. How do you stay in the same page of the tableview after clicking a check box? Example. there are 4 pages with 5 rows each. If i checked a box in page 4, it always goes to page 1.
-
How do I cancel my daughters I Cloud account?
My daughter purchased a 50 mg I cloud account and I want to cancel it since it charged to my credit card.