ETC Source derivation for Forecast generation at Project Level

Hi,
In PJT (Oracle Project Management) , i am trying to generate the forecast through "Generate Forecast". The forecast is at project level.
As of the Oracle user guide , if in generation options if the source is Task Level selection , then ETC is derived from Task Setup.
But if the forecast is @ project level then where to configure the ETC source?
I generated the forecast line (project level) when edit forecast line , the ETC source is null .
Any idea on this?
Cheers

Setups related to ETC collection:
1) Template
Setup>Workplan>Progress ... Allow Physical Percent Complete Collection with sub-option Allow Physical Percent Complete Overrides
2) Task Type
Setup>Task Types ... Enable Actuals and ETC Collection
3) Resource Class
Setup>Resource Classes ... Forecast ETC Method
I believe the pertinent setup is on the Resource Class in your situation.

Similar Messages

No Photo tab under source list for 3rd generation ipod nano

I have a 2nd generation ipod nano and recently purchased a 3rd generation ipod nano. I have the latest version of itunes, however, there is no photo tab under the source list. How am I supposed to import my photos?

I am a brand new ipod user and I have not been able to find the summary, music videos and photos tabs. I have gone into every tab up on the Itunes tool bar and poked around but still can't find it. No such page opens up when I connect the nano. Can someone please help?
Thanks in advance.

Demantra - history period to be considered for forecast ???

In the current system I have 5 years of history sales data - but for my forecast I need to consider data only for the last 3 years.
Are "history length" and "start date" are the only parameters which decide the history length or is there any other parameter also considered in deciding the length of history to be considered for forecast generation.
Appreciate your response.
thx and rgds,
Pankaj

Hi,
Check whether the following parameters fulfill your requirement.
StartAverage
AverageHorizon
PromotionStartDate
last_date
Tks
M J

Making a small change to an old project - How do I know what versions of Drivers and RIO etc was used for the last good build?

If I want to make a small change to a legacy project of years ago, I want to limit my risk by using the exact same versions of LabVIEW, NI-RIO etc. So I check out the project from the repo, but I don't know how to check what versions were used when the last know good build was made. I don't want to introduce issues by mass-recompiling to the latest version.
What is best practice in this case? I could, before every repo commit, take a screenshot of MAX's software tree and save this in the project folder.
Any ideas?
Solved!
Go to Solution.

The report is a great idea! I store both a max technical report and a project.NCE (HW config export) with each of my projects for this exact reason. Those files have sure come in handy!
Also- its a good idea to make an image of the target as accepted and archive it somewhere. ESPECIALLY for PXI based systems from NI. (When the customer comes back for a "duplicate" just send the image with the PO and the system arrives fully configured)
Jeff

Exporting the Browse Sequence XML file for Use in Another Project

When I generate a browse sequence based on the TOC using zero for the book level, instead of getting A, A1, A2, B, B1, B2, I get A, B, A1, A2, B1, B2. The TOC runs through all 1st level items first, cycles back through all 2nd level item, then 3rd level, etc.
My workaround was to auto-create the browse sequence at a 0 level and then manually manipulate it to output according to how my readers would actually read my online book (ie A Aa A1 A1a A1b A2 A2a A2b B B1 etc etc).
Now that I have my browse sequence in the correct order for this project, I do not want to repeat these steps every time I create a new version of my OLH for the same guide after some minor updates have been made to the FM source.
There is a file named whbrs.xml inside the output folder and it contains the browse sequence order I specified during my workaround steps.
Is it possible to export this file to another location for use in another project referencing the same guide?
This methodology is much preferred as I am working at an enterprise level with multiple documents (some numbering in the hundreds of pages) and do not want to have to manually use my workaround for each project I update over the next few years.

Hi Kristopher
You probably wouldn't want to use that particular file as it's an output file. You would likely have better luck using the ProjectName.BRS file as that one should be a source file.
However, keep in mind that whether (or how well) this will work will entirely depend on having the recipient project using the same identical structure and identical file names.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Best Practices for Defining NDS Java Projects...

We are doing a Proof of Concept on using NDS to develop non-SAP Java applications. We are attempting to determine if we can replace our current Java development tools with NDS/WAS.
We are struggling with SAP's terminology and "plumbing" for setting up/defining Java projects. For example, what is and when do you define Tracks, Software Components, Development Components, etc. All of these terms are totally foreign to us and do not relate to our current Java environment (at least not that we can see). We are also struggling with how the DTR and activities tie in to those components.
If any one has defined best practices for setting up Java projects or has struggled with and overcome these same issues, please provide us with some guidance. This is a very frustrating and time-consuming issue for us.
Thank you!!

Hi Peggy,
In Component Model we divide software projects into small components.Components can use other components in well defined manner.
A development object is a part of a component that can be changed or developed in some way; it provides the component with a certain part of its functionality. A development object may be a Java class, a Web Dynpro view, a table definition, a JSP page, and so on. Development objects are always stored as sources in a repository.
A development component can be defined as a frame shared by a number of objects, which are part of the software.
Software components combine components (DCs) to larger units for delivery and deployment.
A track comprises configurations and runtime systems required for developing software component versions.It ensures stable states of deliverables used by subsequent tracks.
The Design Time Repository is for versioning source code management. Distributed development of software in teams. Transport and replication of sources.
You can also find lot of support in SDN for the above concepts with tutorials.
Refer this Link for a overview on Java development Infrastructure(JDI)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/java/java development infrastructure jdi overview.pdf
To understand further
Working with Net Weaver Development Infrastructure :
http://help.sap.com/saphelp_nw04/helpdata/en/03/f6bc3d42f46c33e10000000a11405a/content.htm
In the above link you can find all the concepts clearly explained.You can also find the required tutorials for development.
Regards,
Vijith

Folio Builder: An error has occurred opening the source file for the article layout.

I have been working on a Folio. When I sat down to work on my folio, I was instructed by indesign to update my Folio producer tools, which I did.
Since then I can no longer view any article layout from that folio in indesign. Indeed any folio that I create that does not reside on my desktop give the same problem. I can import articles, add articles and they all upload to the proper place at adobe and I can view them. But I simply cannot open them up through folio builder as I previously.
The exact error message is as below:
An error has occurred opening the source file for the article layout.
The InDesign file for the layout cannot be found.
Another strange thing that seems to be happening is that the folio will randomly reoder the articles in the folio.
I have dumped my indesign prefs, tried creating an entirely new project, made a new account and even reinstalled the entire software.
But the problem of opening an article that I have imported or added to a folio, simply not being found to open has got me stumped. I can't proceed with a major project until I can sort this out.
Can anyone help.
Many thanks
Steve
The problem initially seemed very similar to the one linked below, but I dont get the content generation error
http://forums.adobe.com/thread/901804?decorator=print&displayFullThread=true

Questions about the Adobe Digital Publishing Suite should be posted in the DPS Forum.
http://forums.adobe.com/community/dps

What's the Best Open Source DB for use with Kodo?

Hi everyone,
In terms of ease of setup and use, tools to view info in the database, and least difficulty in
running with Kodo, what is the best open source database to use? I'm use to using Oracle and
SQLPlus. I need to use an open source DB for a learning environment, and I'd like your informed
opinion.
Thanks,
David Ezzio

I have been using postgresql 7.1 with Kodo for a while with mostly positive results, and currently
have it deployed with Kodo 2.2.3. I prefer it to mysql because its feature set is a little richer,
and supports transactions natively. My experience with mysql (without jdo - I haven't tried it with)
is good, but there were little things missing in mysql 3.x, e.g. the ability do do a join in a
DELETE statement.
BTW, there are some severe problems somewhere in the 2.2.4 release with postgresql if you intend to
eventually deploy on it. It also apparently has some problems invoking postgresql's indices, making
it a little less than optimal. But as a learning environment, it's what I'd recommend.
-Mike
Marc Prud'hommeaux wrote:
David-
Here is the rundown of the databases I have experience with:
MySQL: Fairly simple to install (especially if you run Debian Linux), but
configuration, especially adding users, can be a pain. A separate open
source project called "mysql-navigator" makes it fairly easy to do
simple queries, inserts, etc. In most of my tests it outperforms
PostgreSQL, but your mileage will vary. It has a sane CLI that supports
modern features like line history, etc (unlike the horrific SQLPlus).
PostgreSQL: People often say that it is a more "academically
correct" database than MySQL. I've also found it to be quite a bit
easier to set up. Their GUI (called "pgaccess") is simplistic, but does
most things you need. Has a CLI similiar to MySQL's.
HypersonicSQL: By far the easiest to set up (just drop the jar in your
CLASSPATH), but is java only, can be rather slow, and has no GUI tools
available that I know of (except various free vanilla-JDBC GUI tools).
We feel that Kodo works quite well with all these DBs. The MySQL JDBC
driver seems a bit less buggy than Postgres', but their transaction
support is very recent and not very well tested. If I had to pick one or
the other, I would probably go with MySQL.
David Ezzio <[email protected]> wrote:
Hi everyone,
In terms of ease of setup and use, tools to view info in the database, and least difficulty in
running with Kodo, what is the best open source database to use? I'm use to using Oracle and
SQLPlus. I need to use an open source DB for a learning environment, and I'd like your informed
opinion.
Thanks,
David Ezzio--
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com
Kodo Java Data Objects Full featured JDO: eliminate the SQL from your code--
Mike Bridge

Generate xml source file for Oracle Order Capture Print Quote

Hi,
I am new to xml and need to work on creating templates for Print Quote.
I am trying to generate the xml source file for which I enabled the report in system administrator and set the output to XML and assigned to Quoting Reports responsiblity. I then assigned XML Report Publisher to the same responsiblity.
I ran the report (Print Quote) and then I am trying to run the XML Report Publisher but I cannot get the request id in the list of values.
I am able to generate xml source file for other reports like Printed Purchase Order etc.,
The view output for the (Print Quote) report is as follows:
<?xml version="1.0" ?>
- 
<ASOPQTER />
How do I get the xml source file? Or are there seeded templates that I can use to create more templates? Any help would be appreciated. Thanks Ravi

Hi, I am in the same position - did this issue ever ger resolved by anyone. I have done a few XMLP reports successfully now using the Word add-in, but customising the Quote output differs from other standard reports.
If you look at the data definition for Quote it is a 'dummy' definition and has no XML file attached. Does anyone know how I can get the XML format for the report output?
Also the template uses XSL-FO ?!?!?! rather than RTF - not sure how to work with this, the Oracle docs are not very helpful in this regard either.
Has anyone successfully managed to customise the Quote print report? Many thanks,
Roger

Source code for "Creating an Extended Web Dynpro Application"?

Hello!
I'm a rookie in the field of SAP Netweaver and I'm justing getting started with some tutorials. My problems with "Creating an Extended Web Dynpro Application" are to massive to be posted on this forum in this stage. What I want to have some help with is to find the source code for that tutorial so I can get som guidence from there.
Following text is cut out of this page:
http://help.sap.com/saphelp_nw70/helpdata/EN/5d/f42fef2eec724597a03b6bcc670c2c/frameset.htm
Creating an Extended Web Dynpro Application
You can download the Web Dynpro project for the current tutorial from the Software Developer Network SDN (http://sdn.sap.com -> Web Application Server -> Web Dynpro -> Sample Applications and Tutorials) in two versions: one skeleton version you can use for exercises and one final version (solution) for an immediate build, deployment and run on the Java engine of the SAP Web Application Server.
How hard I try I can't find the specific source code on sdn.sap.com
Does anyone have a clue where it is?
Thanks!
Best regards
/Johan Månsson Lindströ

Hi!
I did what you said but I seem to miss the IDE folder. This is what it looks in my Explorer
C: > Program Files > SAP > IDE > CE > eclipse > (no folder called "examples")
I also did a search in this eclipse folder for "examples" but I did'nt find the example I'm looking for
I am running a newer version of NWDS:
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP03 PAT0000
Maybe that's why things don't look the same?

Source code for 2d cross-correlation fx?

I know this is a long shot but does anyone have the c or c++ code to compute the 2d (image) cross-correlation fx? (I know that IMAQ VISION has the cross-correlation routine but I am looking to potentially modify the 2d correlation routine to compute something called non-symmetry coefficient and would need to start with the source code). Or, labview source code for this operation would also be quite acceptable and in fact preferred!!
Thanks,
Don

I don't have the 2D cross correlation in labview, but... isn't the cross correlation very similar to an FFT? In that case a 2D FFT could maybe help since it shows how the 2D FFTs are derived from 1D FFTs in labview. I attach an llb where 2D FFT is done. I don't know where I got it from, maybe I even wrote it myself sometime in the dark past (probably translating it from some piece of C source code from the 'Numerical Recipes' book).
Maybe it is of some help for you...
-Franz
Attachments:
2dfft.llb ‏46 KB

Need Sample source code for Forum in jsp

Hi..
Please tell me the website which is having the sample source code for simple forum... I have to implement it into my project... kindly help me out...
thanx in advance
kumar

Hi..
Please tell me the website which is having the sample source code for simple forum... I have to implement it into my project... kindly help me out...
thanx in advance
kumar

Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
Trash the Preference file:
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
• Mac OS - most probably X.7 or more
• iMovie version - more than iM'11 v. 9.0.4
Action taken
• Finalizing project - I never do as I never understood the gain to do so
• Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set
•I only use PAL (25fps)
Yours Bengt W

User exits/BAdIs for Forecast consumption by sales order

Hello Experts,
My question here is: When Sales Order either new or change comes from ECC to APO, what are key fields considered for Forecast Consumption? Is requirements strategy is considered from location product master or Sales Order brings own data from ECC into it's own structure? I have read from SAP help or documentation that Sales Order coming from ECC does not use requirement strategy from Product Master. Rather it get its own fields like planning strategy/group / requirement class from ECC. It uses location product master only to get consumption parameters like forward/back word consumption days. So I am thinking to use some user exits or BAdIs to enhance the incoming sales orders to consume separate forecast categories in APO.
My requirement is:
For the same one product we want sales orders (can have two different order types or identify by a custom field) to consume two different order categories (ie. FA & FC) by enhancing incoming sales orders. So we have regular 1)Forecast key figure which is 'FA' category and 2)Forecast Additional key figure which is FC category. When we release two separate forecasts from DP we release into these two key figures and categories. Now we want incomping sales orders to consume these two categories separately when our sales orders are having two different order types (i.e OR and ZR).
I want to kow what way we can acomplish this? Are there any user exits or BAdIs for this purpose?
I looked arount BAdI /SAPAPO/DM_BADI_CSP and I am not quite sure it's going to help. Are there any others?
I appreciate if anybody explain me the process?
Thanks in advance!
Raj

Standard Logic --- Whatever plant is visible in the Sales Order, the sales order will appear under that Product Location in SNP
There is no standard way of making the sales order visible in another location.
Depending on your requirement(Ex: Forecast Consumption, planning etc),using APO-BW we can simulate the requirements in the other plant which can be a nightly run and not immediate.
Now coming to your question, if the delivering plant is A, how does ECC Delivery document know when the sales order has plant B that the delivering plant is A.
Can you be more specific.
THanks
Kumar

Sales order for service should create project and link equipments.

Hi,
I'm trying to create a sales order for a service material through VA01. The problem is that this sales order should create a proyect, but at the same time i should be able to associate several equipments to the item position.
The problem is that if I want to create a project, option " Sched.Line Allowed" should be marked for the item category, But if do it, when i create a sales order, if i want to associate 1 o more equipments to my item position, (Extras-->Technical Objects), i get this message "Serial number profile is missing for material..." instead of the table where i would introduce my equipments.
Is there any solution to this problem or should i proceed in a different way?
Thanks in advance.
Luis.

Hi Luis,
We both are working on the same vertical, I am also working now in elevators and escalators.
We have enabled similar (not same) scenario like this.
When order is created (sales order) using serial number profile, serial no and equipment number are generated. I think even during service order, this can be enabled. The only thing you have to do is to create a profile and link that to material master. Please explore in SD and MM. This is easy to do. This will create equpment no for every item in the service order.
We have also enabled the creation of whole project for the order and one WBS element and network for each of the line items adn this happens automatically. This is done as explained earlier. Creation of standard project, std WBS, std network adn then linking the material codes to these objects in CN08. To my knowledge, this is the only way. If there is one standard project, which is linked to all related standard WBS, then during order creation, a WBS element is created after the creation of a standard project. When project is created, service order is linked to the project. So for other items, this project is taken and the WBS and network are created using this project.
Now your assembly processing, production order, Purchase requisition are taken care of by the usage of components overview for activities in the network and object dependencies. For Production orders, you also have standard BOM, which can be linked to activities in the NW. You can control the materials of the standard BOM using selection condition dependencies. You can also initiate variant configuration in service order to maintain the nature of service and then use dependencies to trigger respective assembling, PR etc.
If you want to do this for multiple eqpmts, you can also use functional location, which links multiple equipments to one place.
The only thing you have to do is to configure this and see. Only then you will get ideas.
Pls let me know if you need more information.

ETC Source derivation for Forecast generation at Project Level

Similar Messages

Maybe you are looking for