Etherchannel or Aggregated ports between switch and AIX server

I have a problem with the configuration of an etherchannel or port aggregation between an 4507 Catalyst switch and a server running AIX 5.2 maintenance level 4. The two ports on the switch are on the same blade.
I tried configuring etherchannel with the command
config-if# channel-group XX mode on
and I tried configuring 802.3ad with the command
config-if# channel-group XX mode activ
but in both cases, as soon as I configured the second port, connection went down (I monitored with pings).
On the AIX, I tried configuring modes "round-robin" and "802.3ad" with both switch configurations, but the result was the same.
Does anyone has experience with this kind of configuration?
thanks,
Antoine

Hi amaitre
Could you setting the etherchannel with the AIX Server?
I configured in my switch 4510 with a AIX, but the 2 ports with channel-group keep in suspend. This is the configuration
interface Port-channel2
description ## LACP AIX ##
switchport
switchport access vlan 100
load-interval 30
interface GigabitEthernet4/20
description ## LACP AIX ##
switchport access vlan 100
channel-protocol lacp
channel-group 2 mode active
spanning-tree portfast
interface GigabitEthernet4/21
description ## LACP AIX ##
switchport access vlan 100
channel-protocol lacp
channel-group 2 mode active
spanning-tree portfast
This configuration works with a server Dell with windows 2008.
The schema is 1 switch 4510 with etherchannel to AIX.
Thanks!

Similar Messages

When do the CTI ports between CUCM and UCCX get created

Hi All,
I am trying to work out when the CTI ports between CUCM and UCCX get created.
Do they get created during the post installtion wizzard when you selectthe number of HR licenses or do you need to manually create the CTI ports after the post installation wizzard.
Many thanks for any help
Regards

In new versions (since 4.x) UCCX creates the CTI route points on Call Manager when a trigger is added on UCCX side.
When you add a Call Control Group on UCCX side, that process creates all the CTI ports in CUCM automatically or updates the existing ones if you change settings for the call control group.

How to create database link between oracle and SQL Server

Hello Everyone,
Here i have Oracle Database 9i and SQL Server 2005 databases.
I have some tables in sql server db and i want to access from Oracle.
How to create a database link between these two servers
Thanks,

Thanks for Everyone,
I was struggle with this almost 10 days....
I created Database link from Oracle to SQL Server
Now it is fine.........
Here i am giving my servers configuration and proceedure how i created the db link...@
Using Generic Connectivity (HSODBC) we can create db link between Oracle and SQL server.
Machine (1)
DB Version : Oracle 9.2.0.7.0
Operating System : HP-UX Itanuim 64 11.23
IP : 192.168.0.31
Host : abcdbt
Machine (2)
Version : SQL Server 2005
Operating System : Windows server 2003 x86
IP : 192.168.0.175
Host : SQLDEV1
User/PW : sa/abc@123! (Connect to database)
Database : SQLTEST (exsisting)
Table : T (“ T “ is the table existing in SQLTEST database with 10 rows)
Prerequisites in Machine (2):
a)     Oracle 10g software
b)     User account to access SQL Server database (sa/abc@123!)
c)     Existing SQL Server Database (SQLTEST)
d) Tables (testing purpose) (T)
Steps:
1)     Install Oracle 10.2.0.1 (Only SW,No need of database) *(Machine 2)*
2)     Create a DSN where your windows Oracle 10g SW resides *(Machine 2)*
Control panel >> Administrative Tools >> Data Source (ODBC) >> System DSN ADD
You can follow this link also.....
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
I created DSN as
DSN name : SQLTEST
User : SA/abc@123! (Existing user account)
Host : 192.168.0.175 (machine 2)
Already I have 1 database in SQL Server with the name SQLTEST
You can create DSN with different name also (not same as db name also)
3)     Create a hsodbc init file in $ORACLE_HOME\hs\admin *(Machine 2)*
Create init<DSN NAME> file
Ex: initSQLTEST
Copy inithsodbc to initSQLTEST
And edit
initSQLTEST file
HS_FDS_CONNECT_INFO = SQLTEST    <DSN NAME>*
HS_FDS_TRACE_LEVEL = OFF*
save the file....@
4)     Configure Listener.ora *(Machine 2)*
LISTENER_NEW =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
SID_LIST_LISTENER_NEW =
(SID_LIST =
(SID_DESC =
(SID_NAME = SQLTEST) *+< Here SQLTEST is DSN NAME >+*
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = hsodbc))
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
(PROGRAM = extproc) )
:> lsnrctl start LISTENER_NEW
5)     Configure tnsname.ora *(Machine 2)*
SQLTEST11 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = SQLTEST))
(HS=OK)
:> tnsping SQLTEST11
If No errors then conti….
6)     Configure a file *(Machine 1)*
Cd $TNS_ADMIN ($ORACLE_HOME/network/admin)
Create a file
$ vi TEST_abcdbt_ifile.ora
something=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST =192.168.0.175) (PORT=1525))
(CONNECT_DATA=
(SID=SQLTEST))
(HS=OK)
$ tnsping something
$ sqlplus system/manager
Your connected to Oracle database *(machine 1)*
create database link xyz connect to “sa” identified by “abc@123!” using ‘SOMETHING’;
select * from t@xyz;10 rows selected.
Thanks,
Edited by: ram5424 on Feb 10, 2010 7:24 PM

Question about transfer between oracle and sql server

Could i program to transfer lots of data between Oracle and SQL Server quickly?
I have tried make two connection between two databases, but it took me lots of time to transfer data.
How could I do it?
Thanks

Hi,
If you need to move data fast, then use the Oracle Migration Workbench to Generate SQL Server BCP data extraction scripts and Oracle SQL Loader files.
This is the fastest way to migrate the data.
In the Oracle Model UI tab of the Oracle Migration Workbench, right mouse click on the tables folder. there is a menu option to 'Generate SQL Loader ...' scripts. This will help you migrate your data efficiently.
Regards
John

Database link between oracle and sql server

dear all,
i m a newbie to oracle and i need your help to know how to create a database link between oracle and sql server.my oracle version 10.2.0.3 and platform is redhat linux 5.7.your help appreciated.
thanks in advance.

[oracle@localhost ~]$ rpm -qa | grep -i odbc
php-odbc-4.3.9-3.15
unixODBC-kde-2.2.11-1.RHEL4.1
MyODBC-2.50.39-21.RHEL4.1
postgresql-odbc-7.3-8.RHEL4.1
freeradius-unixODBC-1.0.1-3.RHEL4.3
qt-ODBC-3.3.3-9.3
unixODBC-devel-2.2.11-1.RHEL4.1
unixODBC-2.2.11-1.RHEL4.1
is this showing odbc installed in os?

Data sync between oracle and sql server

Greetings Everyone,
Your expert views are highly appreciable regarding the following.
We at work are evaluation different solutions to achieve data synchronization between oracle and sql server data bases. Data sync i mentioned here is for live applications. We are runnign oracle EBS 11i with custom applications and intending to implement a custom software based on .NET and SQL Server. Now the whole research is to see updates and data changes whenever happens between these systems.
I googled and found Oracle Golden Gate, Microsoft SSIS, Wisdom Force from Informatica....
If you can pour in more knowledge then it's great.
Thank You.

Most of the work involved has to be done through scripts and there is no effective GUI to implement OGG.However using commands is not vey togh and they are very intutive.
These are the steps, from a high level:
1.Get the appropriate GG Software for your source and target OS.
2.Install GG on source and target systems.
3.Create Manager and extract processes on source system
4.Create Manager and replicat processes on target system
5.Start these processes.
First try to achieve uni-directional replication. Then Bi-directional is easy.I have implemented bi-directional active active replication using Oracle DBs as source and target. Refer to Oracle installation and admin guides for more details.
Here is a good article that may be handy in your case.
http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
Edited by: satrap on Nov 30, 2012 8:33 AM

Shared file system between Int and ext server(DMZ) in R12.1.3 for iRec

Dear Friends,
we are using R12.1.3 and we planned to use iRec module.
so we decided to go with External web tier and it will be placed in DMZ for external users.
Is it possible to have shared file system between internal and external web server when external server is in DMZ?
Is it safe to go with shared application Tier file system between internal and external server (or) to have seperate file system in externel web tier?
Regards,
DB

Take a look at Note 380490.1 DMZ Deployment for R12.
Also For Specific Load balancer 727171.1 Up to 12.x but alot of the information is still usefull based on hardware loadbalancer
Also Note 1309013.1 has some good information on SSO/OAM Intergration with E-Business Suite

What are different between gateway and mangement server in scom ?

Hi all,
can anyone let me know What are different between gateway and mangement server in scom ?
thanks,
Sengottuvel M

Hi,
Hope this can answer you question
About Gateway Servers in Operations Manager
http://technet.microsoft.com/en-us/library/hh212823.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Need help with ASA 5512 and SQL port between DMZ and inside

Hello everyone,
Inside is on gigabitEthernet0/1 ip 192.9.200.254
I have a dmz on gigabitEthernet2 ip 192.168.100.254
I need to pass port 443 from outside to dmz ip 192.168.100.80 and open port 1433 from 192.168.100.80 to the inside network.
I believe this will work for port 443:
object network dmz
subnet 192.168.100.0 255.255.255.0
object network webserver
host 192.168.100.80
object network webserver
nat (dmz,outside) static interface service tcp 443 443
access-list Outside_access_in extended permit tcp any object webserver eq 443
access-group Outside_access_in in interface Outside
However...How would I open only port 1433 from dmz to inside?
At the bottom of this message is my config if it helps.
Thanks,
John Clausen
Config:
: Saved
ASA Version 9.1(2)
hostname ciscoasa-gcs
domain-name router.local
enable password f4yhsdf.4sadf977 encrypted
passwd f4yhsdf.4sadf977 encrypted
names
ip local pool vpnpool 192.168.201.10-192.168.201.50
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 123.222.222.212 255.255.255.224
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 192.9.200.254 255.255.255.0
interface GigabitEthernet0/2
nameif dmz
security-level 100
ip address 192.168.100.254 255.255.255.0
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
management-only
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
ftp mode passive
dns server-group DefaultDNS
domain-name router.local
object network inside-subnet
subnet 192.9.200.0 255.255.255.0
object network netmotion
host 192.9.200.6
object network inside-network
subnet 192.9.200.0 255.255.255.0
object network vpnpool
subnet 192.168.201.0 255.255.255.192
object network NETWORK_OBJ_192.168.201.0_26
subnet 192.168.201.0 255.255.255.192
object network NETWORK_OBJ_192.9.200.0_24
subnet 192.9.200.0 255.255.255.0
access-list outside_access_in extended permit icmp any4 any4 log disable
access-list Outside_access_in extended permit udp any object netmotion eq 5020
access-list split standard permit 192.9.200.0 255.255.255.0
access-list VPNT_splitTunnelAcl standard permit 192.9.200.0 255.255.255.0
pager lines 24
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu management 1500
mtu dmz 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static inside-network inside-network destination static vpnpool vpnpool
nat (inside,outside) source static NETWORK_OBJ_192.9.200.0_24 NETWORK_OBJ_192.9.200.0_24 destination static NETWORK_OBJ_192.168.201.0_26 NETWORK_OBJ_192.168.201.0_26 no-proxy-arp route-lookup
object network netmotion
nat (inside,outside) static interface service udp 5020 5020
nat (inside,outside) after-auto source dynamic any interface
access-group Outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 123.222.222.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.9.200.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpool policy
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet 192.9.200.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl encryption aes128-sha1 3des-sha1
webvpn
enable outside
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 2 regex "Windows NT"
anyconnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3 regex "Intel Mac OS X"
anyconnect enable
tunnel-group-list enable
group-policy SSLVPN internal
group-policy SSLVPN attributes
dns-server value 192.9.200.13
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split
default-domain value router.local
group-policy VPNT internal
group-policy VPNT attributes
dns-server value 192.9.200.13
vpn-tunnel-protocol ikev1 l2tp-ipsec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value VPNT_splitTunnelAcl
default-domain value router.local
username grimesvpn password 7.wersfhyt encrypted
username grimesvpn attributes
service-type remote-access
tunnel-group SSLVPN type remote-access
tunnel-group SSLVPN general-attributes
address-pool vpnpool
default-group-policy SSLVPN
tunnel-group SSLVPN webvpn-attributes
group-alias SSLVPN enable
tunnel-group VPNT type remote-access
tunnel-group VPNT general-attributes
address-pool vpnpool
default-group-policy VPNT
tunnel-group VPNT ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:36271b5a1b9382621e14c3aa635e2fbb
: end

Hi Vibor. Apologies if my comment was misunderstood. What I meant to say was that the security level of the dmz interface should probably be less than 100.
And therefore traffic could be controlled between DMZ and inside networks.
As per thr security level on the DMZ interface. ....... that command is correct. :-)

LAG between SG300 and Windows server on VMware ESXi 5.5

Hello,
I'm trying to setting up a LAG of 2 x 1GB between a Windows 2012 server on VMware 5.5 and a SG300-52 switch, but without any success till now.
The SG300 is configured as follow :
config-file-header
SG300-52
v1.4.0.88 / R800_NIK_1_4_194_194
CLI v1.0
set system mode router
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
port jumbo-frame
vlan database
vlan 10,20,30,40,50,60,70,99
exit
voice vlan id 40
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
port-channel load-balance src-dst-mac-ip
ip dhcp pool network DHCP-VLAN1
address low 192.168.2.120 high 192.168.2.139 255.255.255.0
default-router 192.168.2.1
exit
ip dhcp pool network DHCP-Internal
address low 172.16.0.40 high 172.16.0.79 255.255.255.0
default-router 172.16.0.1
exit
ip dhcp pool network DHCP-Management
address low 10.0.0.120 high 10.0.0.139 255.255.255.0
default-router 10.0.0.1
exit
ip dhcp pool network DHCP-Phone
address low 10.0.2.80 high 10.0.2.99 255.255.255.0
default-router 10.0.2.1
exit
ip dhcp pool network DHCP-Pro
address low 10.0.1.140 high 10.0.1.199 255.255.255.0
default-router 10.0.1.1
exit
ip dhcp relay address 10.0.0.60
ip dhcp relay enable
ip dhcp information option
bonjour interface range vlan 1,10,20,30
qos trust cos
hostname SG300-52
username cisco password encrypted c464af817287343305cbd6493c593885695df531 privilege 15
ip ssh server
ip telnet server
interface vlan 1
ip address 192.168.2.1 255.255.255.0
no ip address dhcp
interface vlan 10
name Management
ip address 10.0.0.1 255.255.255.0
ip dhcp relay enable
interface vlan 20
name Pro
ip address 10.0.1.1 255.255.255.0
ip dhcp relay enable
interface vlan 30
name Internal
ip address 172.16.0.1 255.255.255.0
ip dhcp relay enable
interface vlan 40
name Phone
ip address 10.0.2.1 255.255.255.0
ip dhcp relay enable
interface vlan 50
name TV
interface vlan 60
name "Exchange DB Replication"
ip address 10.0.100.1 255.255.255.0
interface vlan 70
name Test
interface vlan 99
name WAN
ip address 192.168.0.2 255.255.255.224
interface gigabitethernet1
switchport mode access
switchport access vlan 10
interface gigabitethernet2
switchport trunk allowed vlan add 10,30,40
no cdp enable
interface gigabitethernet3
switchport trunk allowed vlan add 20
interface gigabitethernet4
switchport mode access
switchport access vlan 60
interface gigabitethernet5
switchport mode access
switchport access vlan 10
interface gigabitethernet6
switchport mode access
switchport access vlan 20
interface gigabitethernet7
switchport mode access
switchport access vlan 20
interface gigabitethernet8
switchport mode access
switchport access vlan 30
interface gigabitethernet9
switchport trunk allowed vlan add 10
interface gigabitethernet25
switchport mode access
switchport access vlan 10
interface gigabitethernet26
channel-group 2 mode on
interface gigabitethernet27
channel-group 2 mode on
interface gigabitethernet28
switchport trunk native vlan 60
interface gigabitethernet29
switchport mode access
switchport access vlan 20
interface gigabitethernet30
switchport mode access
switchport access vlan 30
interface gigabitethernet32
qos cos 5
switchport mode access
switchport access vlan 10
interface gigabitethernet45
spanning-tree link-type point-to-point
switchport mode access
switchport access vlan 50
macro description switch
!next command is internal.
macro auto smartport dynamic_type unknown
interface gigabitethernet46
switchport mode access
switchport access vlan 50
interface gigabitethernet47
switchport mode access
switchport access vlan 50
interface gigabitethernet48
switchport mode access
switchport access vlan 50
interface gigabitethernet49
switchport mode access
switchport access vlan 99
interface gigabitethernet51
spanning-tree link-type point-to-point
switchport trunk allowed vlan add 10,20,30,40,50,60,70,99
macro description switch
!next command is internal.
macro auto smartport dynamic_type switch
interface Port-channel2
description HBAIP-VM2
switchport trunk allowed vlan add 10,20,30,40
exit
ip default-gateway 192.168.0.1
ip route 10.0.0.0 /24 192.168.0.1
ip route 10.0.1.0 /24 192.168.0.1
ip route 10.0.2.0 /24 192.168.0.1
ip route 172.16.0.0 /24 192.168.0.1
GE26 & GE27 have been added in LAG2
VLAN 1UP, 10T, 20T, 30T & 40T have joined the LAG
In VMware, a vswitch has been created, using the 2 NIC connected to the LAG; and a Virtual Machine Port Group has been created for each VLAN member of the LAG
In Windows 2012, the 4 Network adapters have been added (1 for each VLAN), but they cannot ping their gayeway
However, the interfaces receives correctly thei IP addresses (and options) from the DHCP server, via the DHCP relay of the SG300
I also following the configuration described in this link (http://it-erate.com/setting-lag-vmware-esxi-5-cisco-sg300/) but without any success.
Do you have any idea ?
Thanks in advance for your help.

Please make sure the load balance mode in VMware is Route based on IP Hash.
The default value is virtual switch port ID, which cannot work together with port-channel in upstream switch, as explained in:
http://www.vmware.com/files/pdf/virtual_networking_concepts.pdf
"Note: If you select either srcPortID or srcMAC hash, you should
not configure the physical switch ports as any type of team or
bonded group."

Hetrogeneoues connection between Oracle and SQL server

Hi ,
I am having Issues in Making Heterogeneous DB link between Oracle Xe and sql server .
Here is the scenario-
My Oracle and ms SQL 2003 are running on same machine(windows 2003) ,
I have followed this link and reached till 5 but I am not able to tnsping the SQLSERVER DNS entry .
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
Below are my lintener and tnsfiles
LISTENER.ORA
===========================================================================================================================================================
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
       (ENVS = "EXTPROC_DLLS=ONLY:C:\oraclexe\app\oracle\product\11.2.0\server\bin\OraClr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
LISTENERSQL =
(ADDRESS_LIST=
      (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
      (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
SID_LIST_LISTENERSQL=
(SID_LIST=
      (SID_DESC =
       (SID_NAME = SQLSRVRDBLNK)
       (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
       (PROGRAM = hsodbc)
===========================================================================================================================================================
TNSNAMES.ORA
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = testenviroment)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
SQLSRVRDBLNK =
(DESCRIPTION=
(ADDRESS= (PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
(CONNECT_DATA=(SID=SQLSRVRDBLNK)
(HS=OK)
========================================================================================================================================================
Listner Status
C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN>lsnrctl status LISTENERSQL
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 19-JUL-2013 13:15:59
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
STATUS of the LISTENER
Alias                     LISTENERSQL
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date                19-JUL-2013 12:17:39
Uptime                    0 days 0 hr. 58 min. 24 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\listener.ora
Listener Log File         C:\oraclexe\app\oracle\diag\tnslsnr\testenviroment\listenersql\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\PNPKEYipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary...
Service "SQLSRVRDBLNK" has 1 instance(s).
Instance "SQLSRVRDBLNK", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
=========================================================================================================================================================
Now If I try to Tnsping SQL heterogeneous connection , i get
C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN>tnsping SQLSRVRDBLNK
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 19-JUL-2013 13:17:47
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION=
TNS-12533: TNS:illegal ADDRESS parameters
Need Help , please suggest
Thanks,
Manish

Hi ,
Thanks for the update I have changed the Listener as suggested , now my Listener File is
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
       (SID_NAME = SQLSRVRDBLNK)
       (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
       (PROGRAM = hsodbc)
       (ENVS = "EXTPROC_DLLS=ONLY:C:\oraclexe\app\oracle\product\11.2.0\server\bin\OraClr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST=
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.60.146)(PORT = 1521))
      (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY))
      (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522)))
========================================================================================================================
and tns entry
SQLSRVRDBLNK =
(DESCRIPTION=
(ADDRESS= (PROTOCOL= TCP)(HOST=192.168.60.146)(PORT=1522))
(CONNECT_DATA=(SID=SQLSRVRDBLNK)
(HS=OK)
========================================================================================================================
Restarted the listener
C:\Documents and Settings\Administrator>lsnrctl start LISTENER
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 20-JUL-2013 12:27:38
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
System parameter file is C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\listener.ora
Log messages written to C:\oraclexe\app\oracle\diag\tnslsnr\testenviroment\listener\alert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.60.146)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\PNPKEYipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date                20-JUL-2013 12:27:44
Uptime                    0 days 0 hr. 0 min. 5 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\listener.ora
Listener Log File         C:\oraclexe\app\oracle\diag\tnslsnr\testenviroment\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.60.146)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\PNPKEYipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "SQLSRVRDBLNK" has 1 instance(s).
Instance "SQLSRVRDBLNK", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
========================================================================================================================
Still Getting the same Error
C:\Documents and Settings\Administrator>tnsping SQLSRVRDBLNK
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 20-JUL-2013 12:27:52
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION=
TNS-12533: TNS:illegal ADDRESS parameters
C:\Documents and Settings\Administrator>
========================================================================================================================
Do we need to change any thing in sqlnet.ora file for heterogeneous connection?
Thanks ,
Manish

JDBC Connection between Unix and SQL Server 2000

I have SQL Server 2000 installed in a pc as a data server and SQL Server 2000 JDBC Drive installed in a Unix machine. Both machines are connected and can ping each other. After setting up the environment data, I ran a test code to test the connection and got exceptions. ( I did the same process between a pc and the data server, it works well.)
Attached are the test code and error message. Hope someone can help me.
******* Test Code ********
import java.sql.*;
* Microsoft SQL Server JDBC test program
public class Test {
public Test() throws Exception {
// Get connection
DriverManager.registerDriver(new
com.microsoft.jdbc.sqlserver.SQLServerDriver());
Connection connection = DriverManager.getConnection(
"jdbc:microsoft:sqlserver://<hostname>","<username>","<password>");
if (connection != null) {
System.out.println();
System.out.println("Successfully connected");
System.out.println();
// Meta data
DatabaseMetaData meta = connection.getMetaData();
System.out.println("\nDriver Information");
System.out.println("Driver Name: "
+ meta.getDriverName());
System.out.println("Driver Version: "
+ meta.getDriverVersion());
System.out.println("\nDatabase Information ");
System.out.println("Database Name: "
+ meta.getDatabaseProductName());
System.out.println("Database Version: "+
meta.getDatabaseProductVersion());
} // Test
public static void main (String args[]) throws Exception {
Test test = new Test();
******* error message ********
Exception in thread "main" java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.sql.SQLException.<init>(SQLException.java:64)
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Compiled Code)
at java.sql.DriverManager.getConnection(DriverManager.java:137)
at Test.<init>(Test.java:10)
at Test.main(Test.java:32)
************ end of message ***********

If it works from a PC and not from the Unix box then you may have a network issue of some sort, I.E. firewall not letting it through etc.
Try using telnet on the Unix box to see if you can connect to the sql server on the port that the SQL server is listening.
E.G.
telnet server_name 1433
You may need to change the port number to the one that the SQL server is using.
Col

Configuration the connection between portal and srm server only via JDBC

Dear all:
   We want to implement the SRM server and present the supplier web/page in the portal server. Our SRM and portal server install in intranet network.
   For internal employee use the SRM server and the Supplier access the portal server via Internet, we install Web Dispather in DMZ to exchange the HTTP request.
     Network TOP like this :
    SRM server--Portal||FireWall||-Web Dispatcher--Supplier
(--Internal|firewall--|DMZ|-Internet )
The question is : Between DMZ zone and our internal network zone ,there is the firewall and it only allows JDBC protocol (SQL statements or result set) to pass. Other protocol and port could not pass this firewall.
So ,it seems that no way to implement this ,right? Or any other way to implement it ?

thanks

How to sync Projects between Sharepoint and Project server 2010.

Hello,
My project is saved in SharePoint and I am trying to save and link my project from Sharepoint to Project server 2010 so that they will be saved in Sharepoint and Project Serverwill both and synced.Users can edit or update from Sharepoint
and Project server.
Any help or suggestions would be greatly appreciated!
Thanks,
Prashant
Thanks, Prashant

Hi Prashant,
It is a bit unclear how you have a project in Sharepoint AND a project in Project Server 2010.
The basic process is :
you have EPT, associated with a Sharepoint template
You create from Project Server 2010 (project center) a project choosing an EPT
a project plan (mpp) will be created, editable from PWA or MS Project Pro2010
a Sharepoint site associated with the project plan will be created, based on the EPT WSS template
In server settings, you can sync permissions between the project plan and the sharepoint site, and also check for the url and eventually update them.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Replication between Oracle and SQL Server

Does anyone have any experience with replicating data between SQL Server and Oracle database system? If so, I am experiencing time out errors when replicating data. I replicating from SQL Server 2k to Oracle and it time out on the Oracle side.

how to configure my apply process to work with sql server by getway , I want to make replication
note :
I make dblink between oracle and sql and make insert from oracle to sql
is it sufficient to make replication by OEM between oracle and oracle and then add new apply process to work with gateway for sql server and how ?

Etherchannel or Aggregated ports between switch and AIX server

Similar Messages

Maybe you are looking for