Ethernet card stopped working after a bad blackout.

Hi everybody,
we had a bad blackout yesterday night, with a terrible peak of electricity before that. When I turned my mac mini on again, it would not see any more the ethernet card.
In the system preferences it did not appear any more, and when asking for "Network Port Configurations" the Integrated Ethernet appeared grayed out. From the command line i then tried "ifconfig en0" and the answer is: "ifconfig: interface en0 does not exist".
I removed the interface, with the intention of adding it back again, and the only possibility that comes up in the menu (besides bluetooth and airport) is a "6 to 4" interface (which I have no idea what it is). Tried that, but it didn't seem the right thing to do...
I then switched off the computer and started it with the self test disk. The disk did not report any problem at all, however the ethernet address that seems to be there makes no sense to me (it contained characters like ")" and "!"). I restarted, and gave a look at the log files in /var/log/system.log and the only suspicious thing I see is:
"Jul 29 18:38:18 my-computer /System/Library/CoreServices/mcxd.app/Contents/MacOS/mcxd: MCXD.initializeDirectoryServices: Unable to get the ethernet address "
Is there anything else I can try to see if the ethernet card is still there and functioning?
Thanks a lot in advance,
Luca

Hi Luca, and a warm welcome to the Forums!
It does sound like it is a goner, but just to be certain it's not some damaged Software...
Boot from your Tiger Install Disk, put in your language, then look up top for the Menubar, use System Profiler from there, if Ethernet still doesn't give an addy, well, that's about it.

Similar Messages

Ethernet Card Stopped Working (BCM5785M)

My ethernet card stopped functioning about a week ago, at the time I thought my cable had died and did not think to much of it. Then I checked the cable in my desktop computer and it worked fine and was able to connect to my router as well as the interent. To the best of my recolection I did not install any new software that may have cuased the problem, just standard pacman package updates. I ran throught the Networking wiki to try and see if I could find anything wrong but was not able to solve the problem. The odd thing is when I try and connect to my router I obtain and IP address of 192.168.1.128 which to my recolection was a fall back address when an error occurs. I normally will run my laptop on my ethernet card just becuase of shotty wireless router suppled by my ISP. I am able to use my wireless card without problems, other then the substandard performace of the wireless router, so my networking appears to be generally functioning on the computer.
- Lspci -v gives the following output for the network card.
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
Subsystem: COMPAL Electronics Inc Device 0025
Flags: bus master, fast devsel, latency 0, IRQ 50
Memory at f0000000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
I went to Broadcom's website and the tg3 driver was the correct driver listed for the device.
I checked to ensure that the tg3 module was loaded and running at start up as well which it was.
-dmesg |grep tg3 returned the following (I did edit out my MAC address with all zeros)
[ 5.167906] tg3.c:v3.122 (December 7, 2011)
[ 5.236677] tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[ 5.296677] tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[ 5.356733] tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
[ 5.357927] tg3 0000:04:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:00:00:00:00:00
[ 5.357931] tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 5.357934] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 5.357937] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 9.667630] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 181.228436] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 181.228439] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 196.452292] tg3 0000:04:00.0: eth0: Link is down
[ 198.139080] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 198.139084] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 213.460062] tg3 0000:04:00.0: wake-up capability enabled by ACPI
[ 213.490759] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 213.594112] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 215.212240] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 215.212244] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 317.747290] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 319.365458] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 319.365462] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 677.340714] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 677.450541] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 679.089732] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 679.089736] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 1458.870527] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1458.980505] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1460.537332] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1460.653833] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1463.029526] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 1463.029530] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 1463.460524] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1465.088599] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 1465.088603] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 1466.403974] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1466.534005] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1468.152175] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 1468.152179] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 1469.364042] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1471.003175] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 1471.003179] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 1474.737324] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1474.843977] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1476.462073] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 1476.462076] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[ 1538.923961] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1540.563060] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 1540.563064] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
The firmware out of date looked odd to me but seems to be a common thing with the driver at least when I searched the net. I found that message appear several times but without anything posted about my specific problem.
-Running dhcpcd on the ethernet card produces the following output
dhcpcd[3932]: version 5.5.6 starting
dhcpcd[3932]: eth0: sending IPv6 Router Solicitation
dhcpcd[3932]: eth0: broadcasting for a lease
dhcpcd[3932]: eth0: offered 192.168.1.128 from 192.168.1.1
dhcpcd[3932]: eth0: acknowledged 192.168.1.128 from 192.168.1.1
dhcpcd[3932]: eth0: checking for 192.168.1.128
dhcpcd[3932]: eth0: sending IPv6 Router Solicitation
dhcpcd[3932]: eth0: leased 192.168.1.128 for 86400 seconds
dhcpcd[3932]: forked to background, child pid 3975
The router IP address is 192.168.1.1
If anyone can be of assitance I would appreciate it. If any other command out put might help feel free to let me know.
Thanks

Trilby wrote:I only have one little thing to contribute - but first I wanted to say welcome to the forum and awesome first post. This is a great example of how to ask questions the "right way" to get a good answer. Sadly I am not the one with that good answer.
Well thanks for the compliment. this is my first post here but not my first go with linux. I started using linux back when Red Hat was still avalaible under the GNU as a free distro. Then to Fedora in beta, Gentoo. Ubuntu, and now Arch. I have been running arch for about two years and just have not needed to post do to generally finding my answers in the wiki or on a forum post either here or else linuxquestions as well. I guess that leads me to say that this distro is one of the most well documented ones I have ever used. Gentoo would be the only other who comes close but that is needed just with the complexity involved in the install.
Trilby wrote:
I will say though that everything looks perfectly in order. The DHCPCD is good, and it shows that you are connected. I assume you recognize an error as a browser does not connect. But have your tried other web-tools to see if they can connect? A good starting point would be ping. Try each of the following:
ping -c 3 google.com
ping -c 3 8.8.8.8
and post the output here.
I did try a ping on the google site both with the name server as well as the ip while going through the network wiki. I also tried a ping to the router it self without success.
[scar@thecube ~]$ ping -c 3 www.google.com
ping: unknown host www.google.com
[scar@thecube ~]$ ping -c 3 google.com
ping: unknown host google.com
[scar@thecube ~]$ ping -c 3 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
From 192.168.1.128 icmp_seq=1 Destination Host Unreachable
From 192.168.1.128 icmp_seq=2 Destination Host Unreachable
From 192.168.1.128 icmp_seq=3 Destination Host Unreachable
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2008ms
pipe 3
[scar@thecube ~]$ ping -c 3 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
From 192.168.1.128 icmp_seq=1 Destination Host Unreachable
From 192.168.1.128 icmp_seq=2 Destination Host Unreachable
From 192.168.1.128 icmp_seq=3 Destination Host Unreachable
--- 192.168.1.1 ping statistics ---
3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2008ms
pipe 3
I guess one thing I did forget to mention is that the LEDs on the ethernet card seem to be functioning as well when I plug the cable in.
EDIT:
Interesting Update.
I was able to connect to my router as well as the internet by switching over to a static IP. I made sure to set it as high as possible but it did work. I was browsing around and saw another post on the forums and someone suggested to switch to static IP to help troubleshoot the problem.
Here was the post I found: https://bbs.archlinux.org/viewtopic.php?id=143183
Last edited by Ronin324 (2012-06-12 09:59:50)

After Software Update 2007-004 airport card stopped working after wakeup

Hi,
I have a powerbook G4 - DVI running 10.3.9. After I have installed Software Update 2007-003, when my computer goes to sleep and then wakes up, airport card stops working. I had to open the back of the computer, unplug and plug the airport card, then it starts working again. But next time the computer goes to sleep, it stops working again.
Does anyone have a similar problem? Any work arounds?
Thanks in advance.
Also following is the logs from Software Update. Looks suspicious:
Mac OS X Version 10.3.9 (Build 7W98)
2007-04-28 18:56:03 -0400
2007-04-28 18:56:03.190 loginwindow[181] FSResolveAliasWithMountFlags returned err = -43
WirelessScan timeout waiting for first scan result
WirelessScan timeout waiting for first scan result

Deleting AppleAirPort2.kext solved the problem for some...
http://discussions.apple.com/thread.jspa?threadID=934370&tstart=0
While others had to rollback the AppleAirPort.kext to version...
http://discussions.apple.com/thread.jspa?messageID=4310165&#4310165
Installing the Security update 1.0.1 from 5/01/2007 helped others. Reapplying the Combo Update again helped a couple of people.

Ethernet has stopped working after installing "Security Update 2010-003"

I installed the update recently and have been unable to connect to the internet. The network still gives me an ip, but the internet and server button remain "orange". The wifi still works.
Has this happened with anyone else? I am curious as to how I can either uninstall the update or make the ethernet work again..
Much thanks for any recommendations you may have.

Hussain Ameen wrote:
I installed the update recently and have been unable to connect to the internet. The network still gives me an ip, but the internet and server button remain "orange".
Welcome to Apple's discussion groups.
I'm not having that problem after installing the security update.
If you open the Network panel of System Preferences and select the Ethernet connection item, is it set to "Configure" "Using DHCP"? Do you see reasonable values for "IP Address", "Subnet Mask", "Router", and DNS Server"?

[SOLVED] DVB-C card stopped working (after update?)

edit: Marked as solved because the problem hasn't occurred for years.
I have a TechnoTrend TT-Budget C-1501 PCI DVB-C card which used to work fine. Today I installed a bunch of updates including new kernel and now the card doesn't work. Current kernel version is 3.9.2-1-ARCH, as reported by uname -r. I don't remember the kernel version which was installed when the card worked but I installed Arch about a month ago and this was the first upgrade.
dmesg gives the following information:
$ dmesg | grep -i dvb
[ 1.663037] saa7146: register extension 'budget_ci dvb'
[ 1.663232] DVB: registering new adapter (TT-Budget C-1501 PCI)
[ 1.718876] input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/0000:04:01.0/rc/rc0/input13
[ 1.719068] rc0: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/0000:04:01.0/rc/rc0
[ 1.721746] DVB: TDA10023(-1): tda10023_writereg, writereg error (reg == 0x00, val == 0x33, ret == -121)
[ 1.771639] DVB: TDA10023(-1): tda10023_readreg: readreg error (reg == 0x1a, ret == -121)
This problem seems to be relatively common with cards containing the TDA10023 chip but I haven't found a proper solution. Is this just a bug or should I adjust something?
EDIT: I forgot to mention that the card works on Windows.
Hardware specs:
Intel Xeon E3-1230v2 CPU
16GB of RAM
ASRock H77 Pro4/MVP motherboard (BIOS/UEFI version seems to be the latest (1.50))
Geforce GTX 650 Ti
Last edited by ormu (2015-04-07 16:01:12)

Weird, now it's working again after "cold" boot... Could the Windows driver load a different firmware which doesn't work properly on Linux? I think I used the card on Windows just before rebooting to Arch...
$ dmesg | grep -i dvb
[ 1.651217] saa7146: register extension 'budget_ci dvb'
[ 1.651361] DVB: registering new adapter (TT-Budget C-1501 PCI)
[ 1.708299] input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/0000:04:01.0/rc/rc0/input13
[ 1.708338] rc0: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1c.4/0000:03:00.0/0000:04:01.0/rc/rc0
[ 1.711359] budget_ci dvb 0000:04:01.0: DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...

T410 - Sound card stopped working after Lenovo System Update

hi all!
yesterday I performed a system update trough the ThinkVantage System Update 3, I chose a complete update (even the BIOS).
After the update, the sound card is not working anymore: everything in the control panel looks fine, volume is up and all's connected, but no sound is coming out, with the exception of the skype system sound when starting/quitting the application...
No system restore is possible (it looks disabled by our IT dept), updated the drivers via windows update, but no help.
Any clue?
Thanks in advance!
Riccardo
Solved!
Go to Solution.

Remove the audio-driver via Controlpanel - Add/Remove Software
Download the audio driver from Lenovo
Install the driver manually
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Satellite L550 - Flash Cards stopped working after Windows 7 64bit repair

I tried installing/reinstalling/uninstalling and then installing again, Toshiba Value Added Package and flash cards support utility. No luck...
Flash cards utility is installed: [https://dl.dropbox.com/u/3002908/Capture.PNG]
What now? :)
Laptop model: L550-15F (PSLN4E)
Also, does anyone know why a search for drivers for my model returns bluetooth stack package but my model doesn't seem to have bluetooth? :)

Hi
Wait a moment, please! In which order you have installed/reinstalled the Value Added Package and Flash Cards Support Utility? It would be interesting to know what you have done exactly.
I have used the following repair order for this problem:
I uninstalled Flash Cards Support Utility and then Value Added Package. I did make a restart and cleaned the system by using CCleaner. One restart more and I installed Value Added Package firstly and then Flash Cards Support Utility. Now I did make the last restart and the FN keys started to work!
Its important that you install the new versions for Windows 7!
That means Flash Cards Support Utility version 1.63.0.4 and VAP version 1.2.34_64. I founded both on the Toshiba website :)

Intel wired ethernet driver stops working

We have this issue with several T400 and T500 series ThinkPads that the Intel ethernet driver stops working after a while. All this started to happen maybe a month ago. We have both 32- and 64-bit Windows 7 OSs.
Wired ethernet works ok first, but after a few hours or a day or two this yellow exclamation mark appears on the network icon and it says limited or no connectivity. Wired network stops working and there is nothing we can do to fix this other than reboot the computer. It doesn't even shut down properly, just says "Shutting down" forever and blinks the HDD led maybe once a second. So we have to force it and after booting everything is ok until the next time this happens.
When the network stops working, nothing can be done with the driver because everything just hangs. You cannot disable the connection or uninstall the adapter from Device Manager or anything. Unplugging the ethernet cable does not help either. There is nothing about this problem in the Event log other than about the symptoms of not having a network connection.
What could be the source of this problem? Do you have any ideas about how to diagnose this problem further? We have the newest driver and I have also tried the newest driver from Intel.

Go to Local Area Connection (Wired Intel adapter), Properties and the Configure button, in the Power Management Tab UNCHECK "Allow the Computer to turn off this device to save power".
Window7 does NOT always resolve IP and DHCP when it come out of sleep etc. All attempt to release/renew are in vain. I have seen this on various systems for some time. Occassionally a router reboot fixes it but most of the time is the PC. Frustrating but for Wired use this should always be disabled if you're using it a lot. Power savings is not in your best interest.
Let me know if that does it.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

After i updated to mavericks, my usb ethernet adapter stopped working.

I'm not sure why, but when I updated my software to mavericks, my USB ethernet adapter stopped working.

I'm using that adapter:
http://www.edimax.com/en/support_detail.php?pd_id=445&pl1_id=5&pl2_id=26
After I updated to Mavericks, I installed the driver in this page, but it didn't work. Then I googled "AX88772" which is my adapter's part no. or something like that, and I installed that one:
http://www.asix.com.tw/download.php?sub=driverdetail&PItemID=97
I wasn't expecting that work but that did work. So, I think the solution of the problem is finding the right driver. I hope you solve your problem too.

USB Ethernet stop working after hotplug

I have found that my Apple USB Ethernet dongle stop working if I plug in another USB device. This happens both using a USB hub, and when plugging directly into the MacBook Air. I also see this problem when using a similar dongle from another supplier (called AX88x72A). The USB Ethernet dongle works fine after booting, with status "Connected", but if I plug in another device like my phone or a USB drive, the status changes to "Cable Unplugged" after a few seconds, ifconfig no longer show the en1 interface, and syslog gives a few error lines such as:
Fri Jan 13 13:17:19 Airbook-II kernel[0] <Debug>: en1
Fri Jan 13 13:17:19 Airbook-II kernel[0] <Debug>: Ethernet \[AppleUSBEthernet\]: Link down on en1
Fri Jan 13 13:17:19 Airbook-II kernel[0] <Debug>: AppleUSBEthernet::prepareForFlash - Link down, Device 87bf600
Fri Jan 13 13:17:19 Airbook-II kernel[0] <Debug>: AppleUSBEthernet::prepareForFlash - Link down, Device 87bf600
After this, I must reboot the MacBook Air to get the dongle working again. Do anybody know how to force the AppleUSBEthernet driver to rescan the device tree (or something similar)?
With regards,
Birger Retterstøl Olaisen

I have exactly the same problem here (MacBook Air 2,1 - OSX 10.6.8). After several tries (and reboots!), I've found that an unload/reload of the USB Ethernet driver works.
Note that operation is not automatic: I have to execute commands in a terminal in order to retrieve my Ethernet connection... but it is far better than a reboot!
So, if you want to test my method, once you have plugged a USB key (or after an hotplug of your USB-ethernet dongle), you can execute these commands on your terminal (note there are 2 lines and no space in the kext name, a space may be inserted by this forum):
sudo kextunload /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleUSBEth ernet.kext
sudo kextload /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleUSBEth ernet.kext
Of course, i've made a small script with these commands, and copied it on my PATH so it is even easier to execute it. It works perfectly for me, and I hope it could help.
David.

After Service, Airport card stops working randomly on macbook pro 17" early 2009

Hi,
So after the last time my computer was serviced, the airport card stops working randomly on moving the screen.
Upons restarting the computer, it sometimes says wi-fi hardware not installed. Then, if I move my machine around,
lift it up, turn it around, place it back on the table and restart it, it works again. I don't understand this.
And all this started happening the moment my warranty ran out. Extremely frustrating!!

It may be possible that one of the following may be the issue:
The internal AirPort Extreme card is not seated properly.
The internal Wi-Fi antenna connector is not seated properly in the AirPort Extreme card.
The internal AirPort Extreme card's connector is faulty or damaged.
The internal AirPort Extreme card is faulty.
To get an idea on how the Extreme card is installed, please check out the following iFixit article.

USB audio DAC stops working after suspend

I didn't update my mediacenter running arch for a few months so I figured i'd reinstall it because of the filesystem, /lib and grub changes. Now after reinstalling I'm running into the issue that my USB audio DAC stops working after a suspend.
After a suspend speaker-test gives me the following error:
[user@mediacenter ~]$ speaker-test -c 2
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1068:(snd_pcm_dmix_open) unable to open slave
Playback open error: -77,File descriptor in bad state
I've tried replugging my DAC and restarting ALSA, without any success. I have to reboot to get sound again.
Output of /var/log/pm-suspend.log
za jul 21 19:20:24 CEST 2012: performing suspend
Initial commandline parameters:
za jul 21 19:22:06 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux mediacenter 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64 GNU/Linux
Module Size Used by
rfcomm 33627 0
bluetooth 190551 3 rfcomm
rfkill 15604 1 bluetooth
r8169 49386 0
acpi_cpufreq 5933 0
mperf 1267 1 acpi_cpufreq
snd_usb_audio 93519 2
snd_hwdep 6300 1 snd_usb_audio
snd_usbmidi_lib 18744 1 snd_usb_audio
snd_rawmidi 18479 1 snd_usbmidi_lib
snd_seq_device 5300 1 snd_rawmidi
snd_pcm 74958 2 snd_usb_audio
snd_page_alloc 7217 1 snd_pcm
snd_timer 18966 2 snd_pcm
mei 32152 0
snd 58997 9 snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_seq_device
usb_storage 44760 0
uas 9285 0
i2c_i801 8180 0
microcode 12185 0
iTCO_wdt 12813 0
coretemp 5654 0
iTCO_vendor_support 1929 1 iTCO_wdt
crc32c_intel 1987 0
joydev 9991 0
soundcore 5410 1 snd
mii 4123 1 r8169
firewire_ohci 31677 0
firewire_core 51552 1 firewire_ohci
pcspkr 1899 0
serio_raw 4653 0
processor 26567 1 acpi_cpufreq
crc_itu_t 1363 1 firewire_core
evdev 9754 5
ext4 424175 3
crc16 1359 2 ext4,bluetooth
jbd2 73919 1 ext4
mbcache 5977 1 ext4
sr_mod 14823 0
sd_mod 29239 5
cdrom 35648 1 sr_mod
usbhid 36430 0
hid 85477 1 usbhid
ahci 20549 4
libahci 20023 1 ahci
uhci_hcd 23404 0
pata_jmicron 2480 0
pata_acpi 3408 0
ata_generic 3295 0
ehci_hcd 41026 0
libata 167611 5 ahci,pata_acpi,libahci,ata_generic,pata_jmicron
scsi_mod 132974 5 uas,usb_storage,libata,sd_mod,sr_mod
usbcore 147565 8 uas,uhci_hcd,snd_usb_audio,usb_storage,snd_usbmidi_lib,ehci_hcd,usbhid
usb_common 954 1 usbcore
i915 438144 4
video 11307 1 i915
button 4502 1 i915
i2c_algo_bit 5391 1 i915
intel_agp 10936 1 i915
intel_gtt 14047 3 i915,intel_agp
drm_kms_helper 33051 1 i915
drm 208958 5 i915,drm_kms_helper
i2c_core 20369 5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
total used free shared buffers cached
Mem: 3721220 336284 3384936 0 16624 156204
-/+ buffers/cache: 163456 3557764
Swap: 265068 0 265068
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
za jul 21 19:22:07 CEST 2012: performing suspend
za jul 21 19:22:22 CEST 2012: Awake.
za jul 21 19:22:22 CEST 2012: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /etc/pm/sleep.d/90alsa resume suspend:
ALSA lib pcm_dmix.c:1068:(snd_pcm_dmix_open) unable to open slave
aplay: main:682: audio open error: File descriptor in bad state
/etc/pm/sleep.d/90alsa resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
za jul 21 19:22:23 CEST 2012: Finished.
Output of aplay -l
[user@mediacenter ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: DAC [USB Audio DAC], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
What I'm noticing is that after a suspend "Subdevices: 0/1" gets changed to "Subdevices: 1/1".
Any help is much appreciated!
Last edited by Quaith (2012-07-21 17:33:59)

Odysseus wrote:
Unless you can find a way to stop XBMC from using your DAC, I would try hunting down the update which broke it and file a bug report with the appropriate project. https://wiki.archlinux.org/index.php/Do … g_Packages.
I suspect it would be the kernel.
Yes I am suspecting the kernel as well. I'll try to change some options in XBMC to maybe get this working, and if not I'll see how far I can downgrade with the kernel. My last installation was a few months old so I hope it broke not that long ago.
Thanks for the help

USB hub and internet sharing stop working after sleep

Hi,
I have a relatively new Bluestork USB hub I purchased to connect multiple USB devices I have at the same time. It used to work correctly under Leopard, but now it stops working each time the computer wakes up from sleep. I have to restart the computer for it to start working again. Both link and power LEDs stay on, even when the hub is not recognized.
My second problem is related to internet sharing. It stops working after each sleep/wakeup cycle and the only way to make it work again is to restart the computer. It used to work correctly before Snow Leopard as well.
I have all the Mac updates installed.

Thanks Barry.
The hub is on its way to the manufacturer for after sales service...
But the issue with AirPort remains the same, even after resetting SMC.
Some clarification:
* It happens just after computer wakes up from sleep. Restarting solves the problem and the issue doesn't arise until computer goes standby again.
* The whole WiFi card becomes unresponsive. It is not only the Turn Off button, but the whole functionality is stopped. The card can not be activated/deactivated and it doesn't connect to any network. If it is used for internet sharing, clients are unable to connect.

Right USB Port stops working after disconnecting device since 10.9.2

Hi,
Since updating to 10.9.2 the right USB port on my MBA stops working after diconnecting a device (tested: external hard drive, USB flash drive, USB HSPA Modem). The only way to get the port recognizing the device on that port is to do a restart. If the device is connected from starting the MBA it works fine, if I then eject the drive and reinsert it or a different USB device the device doesn't get recognized. The devices do get power, my WD passport ultra spins up just fine, the USB HSPA modem also indicates it's working (with signal) but nothing shows up in finder or diskutility. If the modem is connected from start (and thus working) and then disconnect from the internet but not remove the drive I can reconnect to the internet. The problem only occurs after disconnecting the device. The port becomes inactive. The left USB port works as expected.
Steps I've taken:
Disk Persmission
PRAM
SMC
Reapplied the 10.9.2 update
Sent feedback to Apple
Some Output:
Boot Mode: Normal
Total CPU usage:
   User 11%                    System 10%
Max %CPU by process (name, UID, %):
   WindowServer         0   4.6
Loaded extrinsic kernel extensions:
   at.obdev.nke.LittleSnitch (4052)
   com.driver.JRDUSBModemData64 (4.0.5)
   com.protech.NoSleep (1.3.3)
Loaded extrinsic daemons:
   net.sourceforge.MonolingualHelper
   com.oracle.java.JavaUpdateHelper
   com.oracle.java.Helper-Tool
   com.microsoft.office.licensing.helper
   com.freemacsoft.appcleanerd
   com.adobe.fpsaud
   at.obdev.littlesnitchd
Loaded extrinsic user agents:
   com.oracle.java.Java-Updater
   at.obdev.LittleSnitchUIAgent
/Library/LaunchAgents:
   at.obdev.LittleSnitchUIAgent.plist
   com.oracle.java.Java-Updater.plist
/Library/LaunchDaemons:
   at.obdev.littlesnitchd.plist
   com.adobe.fpsaud.plist
   com.freemacsoft.appcleanerd.plist
   com.microsoft.office.licensing.helper.plist
   com.oracle.java.Helper-Tool.plist
   com.oracle.java.JavaUpdateHelper.plist
   net.sourceforge.MonolingualHelper.plist
/Library/PrivilegedHelperTools:
   com.freemacsoft.appcleanerd
   com.microsoft.office.licensing.helper
   com.oracle.java.JavaUpdateHelper
   net.sourceforge.MonolingualHelper
Extrinsic loadable bundles:
   /System/Library/Extensions/JRDMassStorageDriver32.kext
             (No bundle ID)
   /System/Library/Extensions/JRDMassStorageDriver64.kext
             (No bundle ID)
   /System/Library/Extensions/JRDUSBModemData32.kext
             (com.driver.JRDUSBModemData32)
   /System/Library/Extensions/JRDUSBModemData64.kext
             (com.driver.JRDUSBModemData64)
   /System/Library/Extensions/LittleSnitch.kext
             (at.obdev.nke.LittleSnitch)
   /System/Library/Extensions/NoSleep.kext
             (com.protech.NoSleep)
   /Library/Audio/Plug-Ins/Components/A52Codec.component
             (com.shepmater.A52Codec)
   /Library/Internet Plug-Ins/Flash Player.plugin
             (com.macromedia.Flash Player.plugin)
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
             (com.oracle.java.JavaAppletPlugin)
   /Library/PreferencePanes/Flash Player.prefPane
             (com.adobe.flashplayerpreferences)
   /Library/PreferencePanes/JavaControlPanel.prefPane
             (com.oracle.java.JavaControlPanel)
   /Library/PreferencePanes/NoSleep.prefPane
             (com.protech.NoSleepPref)
   /Library/QuickTime/AC3MovieImport.component
             (com.cod3r.ac3movieimport)
   /Library/Spotlight/LogicPro.mdimporter
             (No bundle ID)
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
             (com.skype.skypeabdialer)
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
             (com.skype.skypeabsms)
   Library/QuickLook/Pacifist.qlgenerator
             (com.charlessoft.pacifist.qlgenerator)
   Library/Services/Clip to Day One.workflow
             (No bundle ID)
Login hook:
   /Library/Scripts/Hooks/login.sh
Global login items:
   $HELPER_PATH
   $HELPER_PATH
   $HELPER_PATH
   $HELPER_PATH
   $HELPER_PATH
User login items:
   iTunesHelper
   Sparrow
   Sort Menubar Items
   AppCleaner Helper
   SurplusMeterAgent
Safari extensions:
   Shut Up
   AdBlock
   SafariKeywordSearch
   Disconnect
   MapTricks
Restricted user files: 28
Font problems: 0
Elapsed time (s): 130
etrecheck output:
Hardware Information:
          MacBook Air - model: MacBookAir3,1
          1 1.4 GHz Intel Core 2 Duo CPU: 2 cores
          2 GB RAM
Video Information:
          NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 0:20
Disk Information:
          APPLE SSD TS064C disk0 : (60.67 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    disk0s2 (disk0s2) <not mounted>: 59.81 GB
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          EFI (disk2s1) <not mounted>: 209.7 MB
          Radha (disk2s2) /Volumes/Radha: 1.81 TB (1.73 TB free)
          disk2s3 (disk2s3) <not mounted>: 189.89 GB
          Boot OS X (disk2s4) <not mounted>: 134.2 MB
FireWire Information:
Kernel Extensions:
          at.obdev.nke.LittleSnitch          Version: 4052
          com.driver.JRDUSBModemData64          Version: 4.0.5
          com.protech.NoSleep          Version: 1.3.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
                 [loaded]          at.obdev.littlesnitchd.plist
                 [loaded]          com.adobe.fpsaud.plist
                 [loaded]          com.freemacsoft.appcleanerd.plist
                 [loaded]          com.microsoft.office.licensing.helper.plist
                 [loaded]          com.oracle.java.JavaUpdateHelper.plist
                 [loaded]          net.sourceforge.MonolingualHelper.plist
Launch Agents:
                 [loaded]          at.obdev.LittleSnitchUIAgent.plist
User Launch Agents:
User Login Items:
          iTunesHelper
          Sparrow
          Sort Menubar Items
          AppCleaner Helper
          SurplusMeterAgent
3rd Party Preference Panes:
          Flash Player
          Java
          NoSleep
Internet Plug-ins:
          Default Browser.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
          None
Top Processes by CPU:
              12%          com.apple.WebKit.Networking
               6%          Safari
               4%          WindowServer
               3%          EtreCheck
               2%          hidd
               1%          Terminal
               1%          notifyd
               1%          opendirectoryd
               1%          com.apple.WebKit.WebContent
               0%          Dock
Top Processes by Memory:
          147 MB          Safari
          137 MB          com.apple.WebKit.WebContent
          49 MB          mds_stores
          29 MB          com.apple.WebKit.Networking
          27 MB          TextEdit
          23 MB          WindowServer
          20 MB          Disk
          20 MB          Sparrow
          20 MB          CVMCompiler
          18 MB          Finder
Nothing out of the ordinairy. Thanks for any help

It's an Apple Pro keyboard and mouse, the dongle is
plugged into the Mac and not the keyboard. The same
set-up is, and has been working on all our other
Macs.
The sleep issue sounds interesting- hum, maybe...
Is your keyboard plugged into one of the USB connections on an Apple monitor? If so, you may want to change that connection to one that is on the G5 itself. My monitor came with a warning note indicating that problems will likely occur if the keyboard is connected to the monitor.
I also had a problem with the automatic sleep function. After much trouble-shooting and a logic board replacement, it was concluded that coming out of the automatic sleep function with any USB device active would freeze the entire USB bus. After disabling automatic sleep in system preferences, I've had no freezing problems. My machine works fine with the manual sleep function in the Apple Menu.
AndyH

Don't know what to do or who to ask??? GPS stopped working after 4.4.2 Kitkat update.

Don't know what to do or who to ask??? GPS stopped working after 4.4.2 Kitkat update.
I have been on the phone multiple times with Verizon, visited multiple stores and still getting different answers with every different person I talk to...
Since the 4.4.2 update, my phone and my wife's phone (14 or 15 month old SIII's) that worked perfect a couple weeks ago no longer know where they are 95% percent of the time... Location cannot be found and GPS satellites cannot be seen (sometimes after searching for 10 - 20 minutes they will lock on).
And it's not just Google maps, it is all apps that need location (ie. gps status and toolbox, weather channel, etc...)
Google maps has us in the right location 50% of the time but i think that has more to do with 4g and wifi (although i always know the weather and traffic conditions in the next town over now).
Navigation will set up fine in Google maps until you actual move the car. Then it updates location every couple minutes, but usually a couple streets over from where I actually am. Maybe 1 out of every four or five times I try it, it will start working about 15 minutes after I started it (then work flawlessly, so it can actually work sometimes). But if you end the process and start over to see if it really "works", back to square one with it not knowing its location all over again...
I obviously did all the normal trouble shooting fixes with the battery and sim card removals and even did a "recommended factory data reset" on my phone with no luck. After this didn't work I stopped by another verizon store yesterday that has "tech services" that I was told could run some sort of diagnostics on my phone. After I showed the tech all the screen shots i have taken of what was happening while driving, he said it is a software problem and a very common one at that.
I was told I should either buy new phones or switch to the edge program where i can get a new phones. These don't seem like very fair solutions to me considering before the 4.4.2 update our phones worked perfect and they are both in almost perfect condition after 14 or 15 months...
Will there be a fix to this??? Is it a Samsung problem??? Should I be contacting them???

If it is 3GS, you can update it to iOS 5 and it will work.

Ethernet card stopped working after a bad blackout.

Similar Messages

Maybe you are looking for