ETL and DAC clustering for high availaibility in OBIAPPS installed in AIX

Hello Gurus
Could you let me know how to configure teh clustering and failover for Informatica and DAC for obiapps 7963 installed in AIX 6.1 . We have license for HACMP cluster.
Any guide to help me out. I coudn't find it in obiapps deplyment guide.

Unlike BI the Informatica and DAC services are based on database. Assuming your database is up and running all the time can you tell me the scenario(s) to bring down these Informatica and DAC services?
If my assumptions are correct you wont have any?
I would suggest to make sure your database is up and running all the time so that Informatica and DAC are up and running.
More over you have to fix manually for any load issues and you wont get benefit from cluster.
Just in case you are going with Cluster then you need to take care of DAC refresh dates.. do you have any plan for the same?
Appreciate if you share about how you end up with this.
If I'm wring correct me, infact I too was waiting for responses for this post :)
Edited by: Srini VEERAVALLI on Dec 26, 2012 9:49 PM

Similar Messages

  • Mavericks Mail; difference in delete folder and trash folder?  I don't know which folder to use clearing out old messages, spam, junk and other detrious I might want to recover in the future and which folder for highly sensitive or personal  informa

    I don't know which folder to use clearing out old messages, spam, junk and other detrious I might want to recover in the future and which folder for highly sensitive or personal  in formation I want to keep confidential.

    More to my question regarding standard Mail folders, how do Trash and Delete differ in function?

  • Upgrading RAM and Flash Storage for higher capacity

    If I purchase a MacBook Pro with Retina Display with 8GB or RAM and 256GB Flash Drive, can I later upgrade the RAM and Flash Drive for higher capacity?

    Just to clarify...
    If I were to purchase a "regular" MacBook Pro (non-"retina", DVD drive, FireWire port, etc.) and seek aftermarket options for...
    (1: replacing the main RAM with 16 gigabytes of RAM (I understand that the newest "regular" MBP is limited to a BTO option of only 8 GB.)
    and
    (2: replacing the hard drive with a larger-capacity aftermarket Solid State Drive, preferably one with a capacity of either 768 gigabytes or 1 terabyte.
    Do such aftermarket options exist for the newest "regular" MacBook Pro? Can this model handle 16 GB of RAM? If there are aftermarket kits available, who installs them?

  • OWB Paris, 10k$/CPU for Enterpr. ETL and 15k$/ CPU for Data Quality option

    Hi,
    I just heard that the licensing model changed completely with OWB 10g R2 (Paris).
    As far as I get informed Warehouse Builder is now shipped as part of the database and for each Database (development, test, production...) you have to license the required option.
    The 2 main options are the:
    -Enterprise ETL Option which costs 10'000$ pro CPU
    -Data Quality Option which costs 15'000$ pro CPU
    This means that from now on you pay for OWB with the the Enterprise ETL and Data Quality Option as much as 50% of what you already pay for the EE DB license with the partitioning option.
    So what's your opinion to this new licensing model?
    Regards
    Maurice

    Hi Maurice. It seems like Oracle is trying to reduce number of licenses with the OLAP option, since it should be possible to have both OLTP and OLAP systems in the very same instance.
    In the other hand, Oracle seems to want more money for "advanced ETL options", such as scheduling, metadata management, bla bla bla...
    But those "advanced" functions seems to me as something every ETL tool should provide. For free...

  • HT1620 I have had downloaded ios7.1.1 and it asks for a pass code to install. I cannot recall having one and if otherwise how do I get one

    I have downloaded the latest iOS and it asks for a pass code which either I cannot recall, two failed attempts,. How do I get one so I can install

    The iOS upgrade is seeking whatever code you use to unlock your iOS (iPhone or iPad) device; your device passcode or PIN or password you're using to secure your device.
    If you've forgotten the PIN or password that you had originally configured to unlock your iOS device, there is a reset sequence.

  • MSI X58 boards bad chipset cooling - with proof and fix proposed for high IOH

    Hello,
    First of all I like MSI boards this is not an anti marketing thread. I own one and with a FIX I don't regret buying it.
    I will go straight to the point, the cooling of chipsets on the MSI Eclipse/PRO is totally disastrous. Here is the proof :
    Since we see this problem all around, and never "good" response from tech support, here it is - in color. You can't deny it.
    I will stay with constructive remarks - the TIM or thermal paste violet is dry and hard as rock ! The bolts are not strong enough also, and doesn't center the heatsink firmly on the north bridge. So if for everyone with high temps of IOH this is why. Please stop telling us that from Intel spec it is OK since it's specified to go up to 100°C. Mine was about >85°C and after a replacement it is under 50°C. Heat causes instabilities and long term wear damage to any chip.
    It is a problem of engineering. Bad TIM was selected. MSI will not admit it since it will cost too much to take back all theese boards.
    Heat dissipation is so bad as if there were no heatsink on the chip.
    Nothing is perfect, if it was MSI would send me a free tube of MX2  
    MSI Eclipse SLI FIX - will work for other models certainly
    Needed :
    Thermal Paste - Arctic Cooling MX2 (Non conductive, long run, one of the best)
    Optional :
    Heatsink - Thermalright HR-05 / IFX
    Tighter bolts, plastic screws.
    How to:
    -You need to take off the heatsink that cover both northbridge aka IOH and southbridge.
    -The heatsink "DrMOS" over VRMs doesn't get that hot. The TIM on it is like straps and doesn't really require replacement.
    If you don't have tighter bolts or screws, you can use existing and add some rings on it to heighten the pressure that will need the heatsink. Warning : If you use metal screws be sure to use a spring or it may do serious damage to the chip.
    -Apply a small amount but enough of thermal paste to cover the violet rectangle of both heatsinks. Replace them on the board.
    How to (with heatsink replacement) :
    Your IOH will go down 40°C. Yes you've read right.
    -With this method either you need A) to loose one part of the heatsink, B) or loose two SATA ports and will not be able to use SLI with long cards but for majority of people it will be fine and provide tremendous cooling performance to south bridge also. You can also buy a second heatsink if you wish to keep original untouched but I couldn't find any that would suits the board dimensions or provide improvements for the southbridge.
    A)If you don't care about the original heatsink, you will need to cut the two heatpipes. Cut it near the southbridge. It doesn't need high cooling as IOH. Apply thermal paste to it and install the new Thermalright heatsink on the northbridge chipset.
    B)You will need to bend the heatsink ! It seems extreme but well works in fact. Bend it towards you and try doing it gentle so it is exactly at 90° angle :
    -Before installing it, clean the small heatsink of the old violet "thermal paste". Apply the new thermal paste on the chipset. Now we can install the heatsink but upside down. It seems extreme again but it exactly fits. It won't apply weight pressure on the board since it touch the plastic IDE connector. Warning : be sure, absolutely sure that the heatsink doesn't touch any electrical components.
    -Mount the Thermalright IFX and your done.
    Here are picture of the final board, and with a mounted system :
    (Clic on pics if you need high resolution picture)
    The case is an Antec 1200. With modified +5V voltage on fans and with lowspeed enermax fan on processor it is whisper quiet.
    Temperatures with overclocked BCLK at 175 MHz :
    Idle/Load : IOH : 45°C / 50°C
    Idle/Load : System : 35°C / 39°C
    Idle/Load : CPU avg : 38°C / 67°C
    Now this board is a jewel - impressive low power consumption, very high overclocking capability, stability.
    Please MSI, fix your TIM and retention system. Maybe for the new eclipse will it be good ?
    I hope this thread has cleared some questions and helped.

    hi guys , just an add on to evr999 thread, ive also now changed both n/s bridge heatsinks, with excellant results some pictures for you all to look at.
    temps before

  • Informatica 9.0.1 Repository Service Shutdown Error when Running ETL in DAC

    Hi All,
    When I executed the ETL in DAC client for full data load, I got this error from log "PLP_LoyMemberTierMovementQtrAggr.log".
    "Failed to connect to the repository on Host : hkhgc01dvapp01, Port : 6315. System Error (errno = 111): Connection refused.)"
    Does it relate to the "Minimun Port Number" and "Maximun Port Number", I set both of them to 6315 in the node01's "Advanced Properties".
    Here list the full log:
    INFO : LM_36435 [Tue Aug 02 17:03:02 2011] : (19218|1327462720) Starting execution of workflow [PLP_LoyMemberTierMovementQtrAggr] in folder [PLP] last saved by user [Administrator].
    INFO : LM_44206 [Tue Aug 02 17:03:02 2011] : (19218|1327462720) Workflow PLP_LoyMemberTierMovementQtrAggr started with run id [481], run instance name [], run type [Concurrent Run Disabled].
    INFO : LM_44195 [Tue Aug 02 17:03:02 2011] : (19218|1327462720) Workflow [PLP_LoyMemberTierMovementQtrAggr] service level [SLPriority:5,SLDispatchWaitTime:1800].
    INFO : VAR_27085 [Tue Aug 02 17:03:02 2011] : (19218|1327462720) Parameter file [u01/app/oracle/biapps/dev/Informatica/9.0.1/server/infa_shared/Temp/PLP_LoyMemberTierMovementQtrAggr_5U627E] is opened for [workflow [PLP_LoyMemberTierMovementQtrAggr]].
    INFO : LM_44253 : (19218|1327462720) Workflow started. Clients will be notified
    INFO : LM_36330 [Tue Aug 02 17:03:02 2011] : (19218|1327462720) Start task instance [Start]: Execution started.
    INFO : LM_36318 [Tue Aug 02 17:03:02 2011] : (19218|1327462720) Start task instance [Start]: Execution succeeded.
    INFO : LM_36505 : (19218|1327462720) Link [Start --> PLP_LoyMemberTierMovementQtrAggr]: empty expression string, evaluated to TRUE.
    INFO : LM_36388 [Tue Aug 02 17:03:02 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] is waiting to be started.
    INFO : LM_36682 [Tue Aug 02 17:03:02 2011] : (19218|1344248128) Session task instance [PLP_LoyMemberTierMovementQtrAggr]: started a process with pid [19492] on node [node01_hkhgc01dvapp01].
    INFO : LM_36330 [Tue Aug 02 17:03:02 2011] : (19218|1344248128) Session task instance [PLP_LoyMemberTierMovementQtrAggr]: Execution started.
    INFO : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [TM_6793 Fetching initialization properties from the Integration Service. : (Tue Aug 02 17:03:03 2011)]
    INFO : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [DISP_20305 The [Preparer] DTM with process id [19492] is running on node [node01_hkhgc01dvapp01].
    : (Tue Aug 02 17:03:03 2011)]
    INFO : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [PETL_24036 Beginning the prepare phase for the session.]
    INFO : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [TM_6721 Started [Connect to Repository].]
    INFO : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [TM_6722 Finished [Connect to Repository]. It took [1.89204] seconds.]
    INFO : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [TM_6794 Connected to repository [Oracle_BI_DW_Base] in domain [Domain_hkhgc01dvapp01] as user [Administrator] in security domain [Native].]
    INFO : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [TM_6721 Started [Fetch Session from Repository].]
    ERROR : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:03:05 2011]]
    ERROR : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [REP_12400 Repository Error ([REP_51490] Communication with client application on host [10.32.64.75] and port [6315] has failed because of network errors. [System Error (errno = 11): Resource temporarily unavailable].)]
    ERROR : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:03:05 2011]]
    ERROR : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [REP_12014 An error occurred while accessing the repository]
    ERROR : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:03:05 2011]]
    ERROR : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [REP_12400 Repository Error (Connection to the Repository Service [Oracle_BI_DW_Base] is broken.)]
    ERROR : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:03:05 2011]]
    ERROR : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [REP_12400 Repository Error ([REP_55101] Connection to the Repository Service [Oracle_BI_DW_Base] is broken.)]
    ERROR : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:03:05 2011]]
    ERROR : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [REP_12400 Repository Error ([REP_55114] Reconnecting to the Repository Service [Oracle_BI_DW_Base]. The resilience time is 180 seconds.)]
    ERROR : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:03:05 2011]]
    ERROR : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [REP_12400 Repository Error ([REP_51147] Failed to connect to the repository on Host : hkhgc01dvapp01, Port : 6315. System Error (errno = 111): Connection refused.)]
    ERROR : LM_36488 [Tue Aug 02 17:04:09 2011] : (19218|1327462720) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:04:09 2011]]
    WARNING : LM_36371 : (19218|1335855424) Workflow [PLP_LoyMemberTierMovementQtrAggr] is aborting.
    ERROR : REP_12400 : (19218|1335855424) Repository Error ([REP_12164] Domain-related error: [[DOM_10164] [DOM_10164] Service [Oracle_BI_DW_Base] is disabled in domain [Domain_hkhgc01dvapp01]. [FAULT_PCSFINTERNALEXCEPTION]].)
    ERROR : REP_12400 : (19218|1335855424) Repository Error (Failed to connect to repository service [Oracle_BI_DW_Base].)
    ERROR : REP_12014 : (19218|1335855424) An error occurred while accessing the repository
    ERROR : REP_12400 : (19218|1335855424) Repository Error (Failed to connect to repository service [Oracle_BI_DW_Base].)
    ERROR : REP_12400 : (19218|1335855424) Repository Error ([REP_55102] Failed to connect to repository service [Oracle_BI_DW_Base].)
    ERROR : LM_36060 : (19218|1335855424) Detected a failure on the repository connection(s).
    ERROR : LM_36028 : (19218|1335855424) Failed to get a repository connection.
    ERROR : LM_36110 : (19218|1335855424) Folder [id = 8] not found.
    ERROR : REP_12400 : (19218|1335855424) Repository Error ([REP_12164] Domain-related error: [[DOM_10164] [DOM_10164] Service [Oracle_BI_DW_Base] is disabled in domain [Domain_hkhgc01dvapp01]. [FAULT_PCSFINTERNALEXCEPTION]].)
    ERROR : REP_12400 : (19218|1335855424) Repository Error (Failed to connect to repository service [Oracle_BI_DW_Base].)
    ERROR : REP_12014 : (19218|1335855424) An error occurred while accessing the repository
    ERROR : REP_12400 : (19218|1335855424) Repository Error (Failed to connect to repository service [Oracle_BI_DW_Base].)
    ERROR : REP_12400 : (19218|1335855424) Repository Error ([REP_55102] Failed to connect to repository service [Oracle_BI_DW_Base].)
    ERROR : LM_36060 : (19218|1335855424) Detected a failure on the repository connection(s).
    ERROR : LM_36028 : (19218|1335855424) Failed to get a repository connection.
    ERROR : LM_36110 : (19218|1335855424) Folder [id = 8] not found.
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [REP_12400 Repository Error ([REP_55115] Still trying to connect to the Repository Service [Oracle_BI_DW_Base]. The remaining resilience time is 116 seconds.)]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:04:15 2011]]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [REP_12400 Repository Error ([REP_12164] Domain-related error: [[DOM_10051] [DOM_10051] Service [Oracle_BI_DW_Base] is not available in domain [Domain_hkhgc01dvapp01]. [FAULT_PCSFTIMEOUTEXCEPTION]].)]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:05:16 2011]]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [REP_12400 Repository Error ([REP_55115] Still trying to connect to the Repository Service [Oracle_BI_DW_Base]. The remaining resilience time is 49 seconds.)]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:05:23 2011]]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [REP_12400 Repository Error ([REP_12164] Domain-related error: [[DOM_10051] [DOM_10051] Service [Oracle_BI_DW_Base] is not available in domain [Domain_hkhgc01dvapp01]. [FAULT_PCSFTIMEOUTEXCEPTION]].)]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:06:06 2011]]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [REP_12400 Repository Error ([REP_55112] Unable to connect to the Repository Service [Oracle_BI_DW_Base] since the resilience time is up.)]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:06:06 2011]]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [REP_12400 Repository Error (Failed to connect to repository service [Oracle_BI_DW_Base].)]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:06:06 2011]]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [REP_12014 An error occurred while accessing the repository]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:06:06 2011]]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [REP_12400 Repository Error (Failed to connect to repository service [Oracle_BI_DW_Base].)]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:06:06 2011]]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [REP_12400 Repository Error ([REP_55102] Failed to connect to repository service [Oracle_BI_DW_Base].)]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [CMN_1761 Timestamp Event: [Tue Aug 02 17:06:06 2011]]
    ERROR : LM_36488 [Tue Aug 02 17:09:24 2011] : (19218|1335855424) Session task instance [PLP_LoyMemberTierMovementQtrAggr] : [TM_6224 Failed to fetch session information from the repository in folder [PLP] for session [PLP_LoyMemberTierMovementQtrAggr.PLP_LoyMemberTierMovementQtrAggr]...Unable to Fetch Mapping associated with the session
    ERROR : LM_44131 : (19218|1335855424) Failed to process the handle prepare done request for task [Session task instance [PLP_LoyMemberTierMovementQtrAggr]] since the task is in a terminating state.
    WARNING : LM_36322 [Tue Aug 02 17:09:34 2011] : (19218|1361033536) Session task instance [PLP_LoyMemberTierMovementQtrAggr]: Execution aborted.
    WARNING : LM_36322 [Tue Aug 02 17:09:35 2011] : (19218|1361033536) Workflow [PLP_LoyMemberTierMovementQtrAggr]: Execution aborted.
    Could any one help, thank you very mcuh!
    Best regards,
    Ryan

    what you are describing does not sound like a mapping issue. It sounds more like a network issue or issue with your client/server services. Did you try to stop/restart all services. First see if you can stop/restart everything (DAC, INFA) re-open a new client connection. Then see if you can open the mapping and validate it. Once this is complete, try to run just the workflow standalone. If that is successful, restart the execution plan. Overall, it sounds like a server or connectivity issue, not a mapping logic issue. if this was helpful, mark the response as correct.

  • Load balancing and clustering for SQL SERVER ANALYSIS SERVER instances to access large number of concurrent users for bi site

    HI
    how to do analysis server clustering 
    we have sharepoint bi site and we published many dashboards pointers ,filters kpis 
    and at a time some 200 to 300 concurrent users access these dashboards pages
    so for maintain this requirement how we apply clustering for ssas intances 
    and also it has load balancing 
    adil

    Hi Adil,
    According to your description, you want to implement SQL Server Analysis Services Clusster and Analysis Services Load Balancing, right?
    In SSAS, we can design highly available solutions in Analysis Services by using: network load balancing (NLB) technologies, failover clustering technologies, or both. For the details about implemention, please refer to the links below.
    http://msdn.microsoft.com/en-us/library/dn736073.aspx
    http://sqlsrvanalysissrvcs.codeplex.com/wikipage?title=Analysis%20Services%20Load%20Balancing
    http://technet.microsoft.com/en-us/library/bb500217(v=sql.105).aspx
    Regards,
    Charlie Liao
    TechNet Community Support

  • DAC Commands for Incremental and Full load

    Hi,
    I'm implementing BIApps 7.9.6.1 for a customer. For R12 container, I noticed for 5 DAC tasks the command for Incremental and Full load starts with "@DAC_" and ends with "_CMD". Due to this, the ETL load fails. Is this a bug..?
    Thanks,
    Seetharam

    You may want to look at Metalink note ID 973191.1:
    Cause
    The 'Load Into Source Dimension', has the following definition:
    -- DAC Client > Design > Tasks > Load Into Source Dimension > Command for Incremental Load = '@DAC_SOURCE_DIMENSION_INCREMENTAL'
    and
    -- - DAC Client > Design > Tasks > Load Into Source Dimension > Command for Full Load = '@DAC_SOURCE_DIMENSION_FULL'
    instead of the actual Informatica workflow names.
    The DAC Parameter is not substituted with appropriate values in Informatica during ETL
    This is caused by the fact that COMMANDS FOR FULL and INCREMENTAL fields in a DAC Task do not allow for database specific texts as described in the following bug:
    Bug 8760212 : COMMANDS FOR FULL AND INCREMENTAL SHOULD ALLOW DB SPECIFIC TEXTS
    Solution
    This issue was resolved after applying Patch 8760212
    The documentation states to apply Patch 8760212 to DAC 10.1.3.4.1 according to the Systems Requirements and Supported Platforms Guide for Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1.
    However, Patch 8760212 has been made obsolete, recently, in this platform and language. Please see the reason stated below on the 'Patches and Update' tab on My Oracle Support.
    Reason for Obsolescence
    Use cumulative Patch 10052370 instead.
    Note: The most recent replacement for this patch is 10052370. If you are downloading Patch 8760212 because it is a prerequisite for another patch or patchset, you should verify whether or not if Patch 10052370 is suitable as a substitute prerequisite before downloading it.

  • My volume button for higher volume(F12) is not working whereas mute and lower volume(F10 and F11) buttons are working, what should I do?

    My volume button for higher volume is not working

    I think there is a Windows bootcamp application that will recognize those keys. The bootcamp stuff is here: http://www.apple.com/support/bootcamp/
    I think it is called bootcamp assistant. Look here: http://www.mac-guides-and-solutions.com/boot-camp-assistant.html

  • W530 SSD and Memory help needed for high performanc​e systems.

    Hi Guys,
    After dealing with lots of laptops that got destroyed by daily use, our organizations is considering ordering 25 Thinkpad W530 laptops from Lenovo and we hope that they last a little longer.
    Our main usage is video editing and design so we have chosen the best that Lenovo has to offer as far as hardware.
    Since Lenovo charges arm and a leg for SSD and 16GB memories, we have decided to purchase these separately and upgrade ourselves.
    Knowing the high need for performance, what would you recommend for 128GB SSD and 16GB memory?
    The laptops are all coming with 7200 RPM drives for storage so the SSD is mainly for programs and the OS.
    For the drive bay, does this part sound right to you? http://shop.lenovo.com/us/itemdetails/0A65623/460/​89555ADB1CE946DA80E0E5D6FE77B164
    This would be used for the HDD and the SSD would be moved to main HDD location.
    Is there anything else we should know about these laptops?
    Thank you in advanced for your time and all suggestions are welcomed.
    Cheers,
    Chris
    Solved!
    Go to Solution.

    I installed 32GB (4x8GB) of Corsair Vengeance RAM, and it has been working wonderfully since day 1.
    Thinkpad W530, i7-3720QM, 1920x1080 screen, 32GB RAM, dual SSDs (Samsung 830, Crucial M4 mSATA), Quadro K2000M, 9-cell battery, DVD burner, backlit keyboard, Bluetooth, Intel 6300 wireless card

  • After installing Mountain Lion on my 17" MBP G-RAID mini connected via Tempo SATA Edge ExpressCard34 is no longer recognized. I restored icon and access by removing 34 card and substituting FW800 for eSATA. Any fix for the higher speed connection? TIA

    After installing Mountain Lion on my 17" MBP G-RAID mini connected via Tempo SATA Edge ExpressCard34 is no longer recognized. I restored icon and access by removing 34 card and substituting FW800 for eSATA. Any fix for the higher speed connection? TIA

    Looks like the Silicon Image drivers were moved to the incompatible software folder during install/upgrade.
    Downloaded latest drivers, errored out of install claiming that the drivers were from an unknown author!!!
    Emailed their tech support this evening describing problem.

  • Steps to move Data and Log file for clustered SQL Server

    Hi guys 
    we have Active'passive SQL 2008R2 cluster environment.
    looking for steps to move Data and log files from user Database  and System Database for  SQL Server Clustered Instance. 
    Currently Data and log  files resides on same drive for user and system Databases..
    Thanks
    Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach A.Shah

    Try the below link
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/468de435-3432-45c2-a50b-23519cd2686e/moving-the-system-databases-in-a-sql-cluster?forum=sqldisasterrecovery
    -Prashanth

  • Help - i recently made put together a high quality movie for a relative, it has taken me months to complete and it goes for a total of 9 hours and 43 minutes ,however, it won't let me export the video at all! please help - its taken ages to make it!

    Help - i recently made put together a high quality movie for a relative, it has taken me months to complete and it goes for a total of 9 hours and 43 minutes ,however, it won't let me export the video at all! please help - its taken ages to make it!

    9 hours??!
    Twice the length of a cinema epic?
    How are you expecting to distribute it?
    iDVD encoding settings:
    http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
    Short version:
    Best Performance is for videos of up to 60 minutes
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
    That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
    Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
    In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • I am a teacher of IT Information Technology for high school students of a public school in the state of Minas My Brazil, and would like to know if you guys have dreamweaver cs5 for students and flash, so I can teach students the construction of these site

    I am a teacher of IT Information Technology for high school students of a public school in the state of Minas My Brazil, and would like to know if you guys have dreamweaver cs5 for students and flash, so I can teach students the construction of these sites trough applications

    Hi,
    In addition to what Ken said, I would suggest that you give Edge Animate a shot as well.
    Creative Cloud is available as trial version for 30 days and almost all creative software is bundled with the Creative Cloud. Tutorials are included for each of the products on the respective sections of the website. For instance, this site Website builder | Download free Adobe Dreamweaver CC trial gives you access to the trial version as well as tutorials.
    I suggest that you go to http://creative.adobe.com and explore the various options available.
    For any purchase related information, feel free to send me a private message if you need further clarification. Click on my picture and use the message option. The experts on this forum can help you with other questions you have on using Creative Cloud.
    Thanks,
    Preran

Maybe you are looking for

  • Credit Card and Paypal Payment Online?

    Hi All, As I understand it, you can use multiple payment types on a purchase at BestBuy.com, but you are limited to only one credit card per transaction. I have an Amex gift card, that I believe Best Buy would consider as a credit card, that I would

  • What's the problem of  uploading file in this code

    hi, i have written following code for uploading a an image file. But when i run this pogram in Eclipse3.1.2 then it shows following Error: I have written following file for selecting a file <body> <form action="display.jsp" method="POST" enctype="mul

  • IPad home sharing stopped working w/ ios7

    Home sharing on my iPad just hangs. I have a large video library, so it took awhile to load it under ios6, but now it has stopped working altogether. The little wheel just keeps spinning around and around, then after about 5 minutes the video app cra

  • Reg: Communication Channel Template

    Hi All, i have done file to file scenario using communication channel template. What i understood from that is i created Communication channel Template in IR, and in ID part also then The sender agreement,receiver agreement,interface determination, r

  • During daily refresh/clone alter database rename file genrating logs under $ORACLE_HOME/dbs with name c-1437102747-20130920-16

    Did anyone have seen this behavior?   DB version : 11.1.0.7   OS : HP-UX Itanum   EBS -11.5.10.2 We are doing daily refresh/clone of a database instance from production. Recently we are seeing the growth of $ORACLE_HOME/dbs directory during this refr