Ettercap and ipw2200 problem [SOLVED]

Hi, I used ettercap with wifi in monitor mode 5 months ago. I cant start ettercap with wifi today.
Ettercap writes:
FATAL ERROR: Inteface "wlan" not supported (802.11 plus BSD radio information header)
My wifi card: Intel Corp.|Intel(R) PRO/Wireless 2200BG (ipw2200)
Any suggestions.
What does mean 802.11 plus BSD radio information header.
Edit:
I have installed wireshark. It works fine.
Last edited by mezcal (2007-03-24 09:59:42)

i'm running a T43 as well so here's what i did
1) do a base install of arch
2) download the ipw-2200 arch linux package on a computer that has the internet working and save it to a usb flash key or burn it to a cd or something. or just plug in your ethernet on your laptop to a working internet hookup and download it with lynx. don't get it from the developer's site, you need the arch .pkg. file. here's the link:
ftp://ftp.archlinux.org/extra/os/i686/i … pkg.tar.gz
3) mount your usb key if you did it that way, as root do:
# mkdir /mnt/flash
# mount -t vfat /dev/sdb1 /mnt/flash
change to the directory where you have the file:
# cd /mnt/flash
4) then do a
# pacman -A ipw2200-fw-3.0-1.pkg.tar.gz
5) do you have wireless_tools package installed? you need it for wireless to work. do
pacman -Q wireless_tools
, it should return the version if it's installed. if not download and install it the same way:
ftp://ftp.archlinux.org/0.7.2/os/i686/w … pkg.tar.gz
6) install ifplugd:
ftp://ftp.archlinux.org/extra/os/i686/i … pkg.tar.gz
6) as root, edit /etc/rc.conf:
in modules, add ieee80211, ieee80211_crypt, and ipw2200.
check what your wireless adapter is named, it might be wlan0 or eth1 or eth0 depending, i've had it change. do a
iwconfig
to see what has wireless extensions. say it is eth1 then do:
in networking section of /etc/rc.conf, make it like this:
eth0="dhcp"
eth1="dhcp"
INTERFACES=(lo eth0 eth1)
in DAEMONS section add @ifplugd, and @network.
reboot your system, and you should see your wireless indicator light come on all by itself without you having to hit Fn+F5. let me know how that works.

Similar Messages

Sagem f@st 800 and leopard problem solved!

Hi to every leopard users! : )
i finally solved the black screen caused by sagem f@st 800 usb modem!
first of all get the lastest drivers here:
http://lgsagem.free.fr/drivers_fast800.htm
then just follow these steps:
before installing drivers keep network in the pref panel opened with preferences saved.
1-before connecting the usb open network in pref-panel
2-click on your connection (mine is ppoe service but i renamed it)
3-save preferences (lock the padlock)
4-after saving preferences connect the usb to your mac!
i don' t know why everytime a turn on my mac the preferences are not saved i mean the padlock is open..well i finally understand that before connecting the usb i have to lock the padlock (everytime i find it open) and after doing this the usb works fine!!
also connecting and disconnecting it several times!
I really hope it works for you too! bye bye!

well it started giving me problem again...i really don' t know what could it be... so tomorrow i'll change the modem..that's the real solution...
Message was edited by: Elen4

GDM and OpenBox - Wallpaper and background problem [SOLVED]

I have a strange problem.
I am using GDM as login manager. And I am using OpenBox as a window manager.
As soon as GDM appears on the screen, my wifi connection is connected... so its good.
But, when I login Feh loads my background picture and it disappears after few seconds..... I solved this modifying the autostart script (adding the sleep).
Now background stays, BUT not always. Sometimes it disappears.... sometimes not.
It seams that this problem is appearing randomly.
So my question is:
Is there a way to disable Gnomes (GDMs) background color and picture after loading openbox through GDM?
Last edited by webmasteryoda (2011-06-26 10:50:10)

azleifel wrote:
It will apply to gnome as well, so if gnome-settings-daemon is your problem then you either need to choose one environment or perhaps do some settings adjustment with gconftool-2 when you log into each environment. I didn't try this but settings for openbox could be changed with a couple of gconftool-2 lines in autostart.sh, e.g.
gconftool-2 --set --type bool /desktop/gnome/background/draw_background "false" &
and settings for gnome could be changed from a DE-specific ("OnlyShowIn=GNOME") .desktop file or two in $HOME/.config/autostart.
I tried this, but it didnt work. Its a Gnome 3.
I dont understand second part of your post... ("OnlyShowIn=GNOME")

W540 + Dock station (40A20170EU), Audio and HDMI problems - SOLVED

Hello,
I have recently bought your dock station (40A20170EU) and as soon as I started using it the problems began:
- Audio jack on the dock is not working and is emitting static.
- As soon as I connect a display via HDMI port (on the dock station) my laptop display starts flickering (the display was tested on the PC and works).
I have updated the dock firmware to 2.21.000, nothing changed.
PS. The second monitor running from the docking stations display port is working fine.
I need your help!
Thank you!

SOLVED.
1) Removed all display drivers.
2) In BIOS I changed the display setting from standard to advanced.
3) Reinstalled all the display drivers.
4) Reconnect the HDMI monitor and now it’s working.
5) WINNING J
Thanks anyway.

NOAA and Gmail problem solved after one small change - coincidence?

I have a late 2009 iMac with a 3.06 GHz Intel Core 2 Duo processor and 4GB of memory, and I am running OS X 10.9.4 with all software updates.
I have had continual problems with Apple Mail reliably loading my new Gmail for months. I have combed these communities and the web in general for advice and fixes, and I've tried a lot of them. The problem always recurred. I had to quit Mail and restart the application to load new Gmail emails to my Inbox countless times every day. If I didn't find everything else about Mail so perfect for all my needs, I'd have quit using it.
Recently, I started having problems getting to NOAA's weather forecasting website as well as the NHC (National Hurricane Center). I started looking around to see if others were experiencing this problem, and I did see I was not alone. Someone suggested this fix: System Preferences/Network/Advanced/DNS and entering 8.8.8.8 as my server. It worked like a charm, and NOAA and the NHC now come up quickly and reliably as they always had in the past.
Oddly, I have had ZERO problems with Gmail since I did this. None. It's working perfectly for the first time in months. I've checked updates to software and see no changes to explain this. The only change that took place immediately before Apple Mail started loading Gmail reliably was the DNS change.
I know just enough about computers to understand that I know nothing about computers. So I'm throwing this question out there to people who do have some understanding of these things: Is there any connection between what I did to fix my access to the NOAA sites and the fact that my Apple Mail is finally working properly? Or is it just some freak coincidence?

It has solved my problem untill hal has been updated now i am back to the same problem
eth1 -> 00:0e:35:75:95:f2
eth0 -> 00:c0:9f:59:04:00
[wael@nasreddine ~]$ tail /etc/udev/rules.d/udev.rules
##### Hotplug rules - end
# debugging monitor
RUN+="socket:/org/kernel/udev/monitor"
KERNEL="eth*", SYSFS{address}=="00:0e:35:75:95:f2", NAME="eth1"
KERNEL="eth*", SYSFS{address}=="00:c0:9f:59:04:00", NAME="eth0"

Oracle Cluster and libnnz10 problem - SOLVED!

Hi to all
I have some machines (XServe) with OSX 10.4.9 and Oracle 10.1.0.3.
In all the machines I follow the instructions find in this forum (the relink libnnz10.dylib trick) and all the databases runs very well.
Now I'm trying to instal two machines in cluster mode.
The node 1 is a clean machine. The node 2 is a machine that has a Oracle single instance running.
All the installation in cluster mode runs smooth and I made the same things that in a single instance (like the relink trick).
With all installed, the CRS daemon is running and the listeners is running (I run NETCA before runnig DBCA).
Using the DBCA works fine until the last step - for the database creation, the last script has a shutdown/startup command to run a full recompile of all packages and procedures in the database.
At this moment the installation fails (with end-of-communication channel). Looking in the logs, this is the _dyld libnnz10.dylib error.
Even after the crash in installation, I quit the DBCA and runs SQLPLUS. I connect in the database, try a startup (that fails with the error mentioned), reconnect again and make two commands : alter database mount; alter database open; (and it works).
I do this in the two nodes and the CRS daemon recognizes the running instances (with crs_stat -t I can see all online) and the database is running and in cluster (what I do in one instance appears in the other and the datafiles are the same), including failover tasks (like simulating a node down - the database still running).
But all tries to run the startup/shutdown commands fails. It fails always when the LMON processes try to start.
I recheck the installation, focusing in the relink trick with the libnnz10. When I use DBCA to install a single instance on node 1 or node 2 in the same ORACLE_HOME of the cluster, it runs fine (including startup/shutdown) - this make me think that all the database relink's are fine.
I try to relink the cluster. In installation it uses 4 makes and I redo this makes without the libnnz10. The makes runs well too, but the error continues (only using startup/shutdown in cluster database).
I'm doing the documentation of the process and will post it, but I want to resolve this issue.
Any ideas ?
Thanks to all
Message was edited by:
alliance01

Hi to all.
I downloaded the 10.1.0.5 as soon I can - thanks to damjanp!
After the download, I follow all the instructions.
I stop the database, all the services and the cluster. Run the installer and it works fine.
When I try to make the post-installation tasks, I cannot startup the database (nor with the error that I was having). I received a Oracle Cluster Configuration Error...
I read all the logs and find 3 errors. I do not know if this occurs because of wrong environment variables.
The commands awk, touch and basename fails - the scripts try to find this commands in /bin (this commands in OSX stay in /usr/bin). I prefer make a link (ln -s) using root :
ln -s /usr/bin/awk /bin/awk
ln -s /usr/bin/touch /bin/touch
ln -s /usr/bin/basename /bin/basename
When I done this, the cluster starts (ocssd.bin, crsd.bin e evmd.bin). But when I try to start the database, it fails (ORA-29702 : error occurred in Cluster Group Service operation) and srvctl gives me PRKH-1010 : Unable to communicate with CRS services. [OCR Error(Native : prsr_initCLSS:[21])].
To resolve this I use localconfig (user root) :
localconfig reset /<ORACLE_HOME>
After this, I shutdown all and restart the CRS services - and for my surprise the CRS automaticaly starts all the services (including the instances).
And the libnnz10 problema was gone!
I read the documentation and found that the "TNS - lost contact" problem in Tiger (yeah - Tiger) was resolved.
I think that 10.1.0.5 can runs on Tiger more easily.
The cluster are running fine now - I shutdown/startup the instance several times to test with no errors.
I will prepare a documentation to post in the Web about this installation. When I finish I post in this forum the link.
Thank's to all.

Mega PC 180 Remote (HiFi Mode) and Eject problem SOLVED

Hi everyone,
I just bought the MSI DR8-A DVD Writer......... and Gues what..??!!??
- Now i don`t have any problems anymore with the Remote in HIFI mode (strange)
- Also the new drive will eject as it supose to ........
I am a very happy man now.
I am all set up, and my Home Media Center is complete Now.
Don`t understand some of you guys still having problems....
Remember: the Mega PC is not for NOOBS
Greetings from the Netherlands,
Defaulty
MSI Mega PC 180
AMD XP2400
2x 256 mb (No label) PC3200
80 Gig Maxtor
MSI DR8-A DVD Writer
MSI TV@nywhere Master
MS Windows XP (SP1)

Quote
Originally posted by sav_
nopz.
I even wiped the entire copper layer of the cooler with polish, added Artic Silver Ceramic and yet, 40° idle, 59° stressed...
Note that the intake of the cpucooler gets blocked by the Radeon, so the reason is obvious
A pretty common trick used on Biostar SFFs (which are even smaller than the 180) is to add two Zalman 80 x 15 OP1 fans to the side panels. Left panel toward the front and right panel toward the rear. This gives a good cross ventilation flow and when you run the fans on the low voltage setting-----it is totally silent---so you haven't added any noise to the overall setup.
Drops CPU temps 4-5 C. Might work on the 180. You can see an example of the side panel fans----as well as another possible solution, watercooling, here:----just scroll through all the pics to find the fan solution...SFF Fans and Watercooling
Good Luck-----John

Tint and Trayer problem [SOLVED]

Since tint has no systray, I'm running Trayer on top of it, but I was wondering if there is any way to fix the task size (so it wont go past the green line)? Or even another solution if there is any.
Any help, appreciated.
Thanks
I'm sticking with <task> <clock> <trayer> option now. Thanks cinan
Last edited by joqueza (2008-09-28 21:34:42)

cinan wrote:you can set tint size in .config/tint/tintrc, there's "panel_size = x y" and then move trayer to corner
Thanks for your input... but this way the clock will be on trayer's left, and thats not exactly what I want....
Last edited by joqueza (2008-09-28 18:28:08)

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Spotlight and finder cannot find files as of a certain date. What can be the problem and how to solve?

Spotlight and search field in Outlook on MacBoon cannot find files as of a certain date. What can be the problem and how to solve?

Reinstall on both.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it isthree times faster than wireless.
Restore your iPhone to reinstall iOS. Be sure to do this while connected to your computer and iTunes.
     Tap Settings > General > Reset > Erase all content and settings.

I can not write in Hebrew And create effects It shows all distorted When This problem solved?

I can not write in Hebrew
And create effects
It shows all distorted
When This problem solved?

roeisarusi wrote:
When This problem solved?
Nobody knows. iWorks apps have always had bugs that make them unsuitable for Hebrew/Arabic for most people. Tell Apple here:
http://www.apple.com/feedback/keynote.html

Apple has a problem and the cant solve it. I had some very important call but this new iphone just shut down on me and wont turn on i tried everything u can find in apple support nothing works for me. Anyone know what i can do?

Apple has a problem and the cant solve it. I had some very important call but this new iphone just shut down on me and wont turn on i tried everything u can find in apple support nothing works for me. Anyone know what i can do?

I would instead say you have a problem since nearly all IPs work as advertised. IF you do have a bad phone, take it into an Apple store and get a replacement. Hope you didn't jailbreak your phone though as Apple probably will tell you, you broke it, you fix it.

TS1506 In most of my email attachment the logo ( Mimi attachment ) show and I can not open that attachment , why and how to solve this problem ??? iPad 2, iOS 7

In most of my email attachment the logo ( Mimi attachment ) show and I can not open that attachment , why and how to solve this problem ???
iPad 2, iOS 7

When did this start? What was the last thing you changed before problem started?
Have you tried sending the attachment from a different account. Have a friend send you an attachment. Get a gmail account.
Send the email with attachments to two different accounts one to your ipad and the other to a gmail account in a web browser and not on an iPad. See if you can read the ones to the gmail account.
You did reboot your ipad?
Standard stuff for ipad.
http://www.my-iguru.com/ipad/ipad-hints-tips/ipad-viewing-saving-email-attachmen ts.php

I have problem c connecting to cellular data network. There is massage "couldn't activate cellular data network, PDP authentication failure". What is it and how I solve this problem?

I have problem c connecting to cellular data network. There is massage "couldn't activate cellular data network, PDP authentication failure". What is it and how I solve this problem?

If you have a data only plan for the iPad with your carrier, if no change after powering your iPad off and on you will need to contact your carrier.

Ettercap and ipw2200 problem [SOLVED]

Similar Messages

Maybe you are looking for