EULA reapears after streaming the disk to another machine with Citrix Provisioning Services

We have a Citrix Xenapp 6.5 farm and we use Citrix provisioning services to stream 1 disk to multiple servers in the farm.
We use Adobe acrobat professional X and the EULA pop-ups keeps appearing for each user. During the installation of the master image the ACCEPT_EULA property is set to "yes"
The only way to get rid of these popups is to unistall acrobat and re-install it.
Is this the only way to fix this or is there a quicker method, script or registry entry or whatever to fix this issue?

How are you setting the property? Is it command line or via the Wizard?
If CMD, then get the Admin Guide and double check your syntax.
If Wizard, verify the property is set by inspecting the UI and the installer tables with the Direct Editor.
Post back.
Ben

Similar Messages

Help with installing Office for Mac 2011 when I do not have the disks on another machine

I have a purchased legal version of Office for Mac 2011 on my personal laptop, and I just purchased one for the house (kids). I do not have the original product key. How do I get it registered so I can download a version to install on the laptop?
I have also logged in (or created accounts) with my two e-mail addresses, but it says neither is associated with Office. I am not sure what to do. Thx!!

Hi,
This forum is to discuss problems of Office development such as VBA, VSTO, Apps for Office .etc. But I find your question is related to the installing of Office for Mac 2011. So I suggest you posting it in Office
for Mac support for more effective responses.
Thanks.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Re-formatting / erasing a corrupted hard disk from another machine?

Hi there,
I have a macbook pro that was running 10.6.3. The hard disk fell over and for some reason the DVD won't be recognised. When I boot my macbook I get a grey screen with a flashing folder with a question mark in it. I tried to boot to disk utility without luck (pressing command + R didn't bring up the DU). How do I go about reformatting / erasing the disk using another machine (I have another macbook pro running 10.7.5)? I assume once that is done then either the DVD will work properly or I can install from the internet?
Thanks!

If you are getting the flashing ? mark then either the drive has failed or the cable that goes from the drive to the logic board has failed. In either case that failed part will need to be replaced.
If the drive failed it has failed and the data on it is irretrievable. You should take the drive out of the older Mac and connect it to the newer Mac with a SATA to USB adapter. If you can read the drive that way then you can copy the data off it and the drive itself hasn't failed, the cable has.
Your Mac running 10.6.x Snow Leopard doesn't have access to the newer Recovery HD system like Mac's running Lion or Mt Lion.
But you can use your original OS X reinstall DVD or the retail Snow Leopard DVD you used to upgrade it from an older version of OS X to boot the system and use Disk Utility.

I have purchased a WRT54G and after loading the disk and...

I have purchased a WRT54G and after loading the disk and following all of the instructions the program will not go online with a DSL connection. I can hook up direct to the DSL and every thing is fine. Looking at the diagram it shows the link between the laptop and the router but not between the route and DSL. Can someone help?

Try this link to configure the Router using DSL connection ...

HT6030 I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

Be sure to start your iMac using its original grey System Install DVD: Insert that disc and start your Mac while holding the d key. At the Mac OS X Utilities screen select Disk Utility and format the hard disk. Select "Mac OS X Extended (Journaled)".
Then, install OS X.

Hi, we have a G5 Blade server running OS X 10.5.8 with a dual Fibre Channel card. The OS does not read the card and cannot establish connection to the RAID controller. I have tried to move the card to another port with no luck. Ran all the updated softwar

Hi, we have a G5 Blade server running OS X 10.5.8 with adual Fibre Channel card. The OS does not read the card and cannot establishconnection to the RAID controller.
I have tried to move the card to another port with no luck.Ran all the updated software possible. Please can someone advice

Hi,
Was the card previously working in that machine? If it was and you have a G5 tower you could try the card in there. Here is a list of Apple fibre cards and cables which show what's compatible with what. http://support.apple.com/kb/HT1769
The card should appear in the System Profiler under Fibre Channel and PCI Cards.
All the best
Beatle

Question about deploy the scenario to another machine

I am trying to deploy the scenario to another machine, since I want to keep the version same, what I did is: 1. export the scenario from source machine designer 2.import the scenario in target operator.
The import is successful and it is running fine, but for each scenario I get 2 scenario in the target machine operator, one is like scen1, another is copy of scen1. why does this happen? did I miss anything during the process?

Hi,
I believe that you are importing it in "Duplication" mode, in cause of that it is creating a copy.
Please, try import it in Insert Update mode

Facebook app is blocked on "waiting..". I tried to close the app firstly but it doesn't appear on the multitasking. I tried the normal and the hard reset. I tried to move the app in another group with itunes but it is still in "waiting". Any suggestion?

Facebook app is blocked on "waiting..". I tried to close the app firstly but it doesn't appear on the multitasking. I tried the normal and the hard reset. I tried to move the app in another group with itunes but it is still in "waiting". Any suggestion?

I can't! Tried to deleteit from the iphone and from itunes but the X doesn't appear!

HT3702 After purchasing the app but not satisfied with the App, is there any policy to request to refund the money back

After purchasing the app but not satisfied with the App, is there any policy to request to refund the money back

Lazy bugger:
http://www.apple.com/support/country/

Restarting a failed admin server on another machine with different IP

Hi,
I'm trying to restart a failed admin server on another machine with different IP on Weblogic Server 10gR3. After copying the domain config to another server, the admin server can be started without any problem, but it cannot contact the managed server until the managed server is rebooted.
The behavior contradicts the documentation, http://download.oracle.com/docs/cd/E12840_01/wls/docs103/server_start/failures.html#wp1064112, that says Running MSs will learn the new AS address when they are contacted by the AS after it has been started. It does not mention the managed servers need to be rebooted.
did I do anything wrong? Your help would be much appreciated.
Thanks a lot,
Andreas

Hi,
What ever you said is true. If the IP Address of Admin Server is changed, then Managed Server must connect to Admin Server after "ReconnectIntervalSecs" . If the IP address is not moved then Admin Server Should contact Managed Server automatically.
Can you provide details steps you had performed, so that we can identify the root cause of the issue.
Thanks.
Vijay Bheemineni.

Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule?

Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule via the USB port? My current Time Machine has a total capacity of 1TB. I'd like to double or triple its memory. I don't want to use the external hard drive in lieu of the Time Capsule hard drive. I'd like to use it in addition to. Just don't know if/how it's possible.
This is another one of those questions that I've searched the web for answers, and have gotten tricky answers back. So now I'm trying to introduce a clean slate to the mix.
Thank you for your time!

Well, what you mentioning is possible. However, I don't know whether it's supported (as in, "easy to set up."). Time Machine officially supports backing up to a locally attached drive, to a machine running a Time Machine server (i.e. running OS X Server software), and to a Time Capsule. I don't know that it officially supports a drive attached to an AirPort or to a Time Capsule. Though I know some people have gotten it to work.
Best I can say is to try it. Plug the drive into the Time Capsule, ensure it's shared on the network, and then try and set it as a backup target from a machine in the Time Machine backup panel (you'll need to ensure it's mounted first). If it works, you're all set.

PA Error: The project has no assets with valid in service dates

Hello all,
I am facing issue while generate Capital Project (Projects: Capitalization > Capital Projects) I am getting below Exception Reason error.
The project has no assets with valid in service dates
Please Help me to clear this issue.
Thanks and Regards,
Muthu

Hi,
Thanks for your reply, Let me check and get back to you.
Thanks and Regards,
Muthu

PRC: Generate Asset Lines for a Single Project shows error(The project has no assets with valid in service dates.)

Project Number             Project Name                    Exception Reason
15                         Capital Project Jatyuapura      The project has no assets with valid in service dates.

HarvirSinghSaini wrote:
Project Number             Project Name                    Exception Reason
15                         Capital Project Jatyuapura      The project has no assets with valid in service dates.
PRC: Generate Asset Lines For A Range Of Projects Prints Exceptions (Doc ID 1519498.1)
Integrating Oracle Inventory Transactions Into Oracle Projects To Generate Asset Lines & Interface Assets To Fixed Assets (Doc ID 1392743.1)
Thanks,
Hussein

How to re-install iWork after erasing the disk?

I had to erase the disk, now after I have installed Maverick I see that I've lost iWork and iPhoto. How can I re-install them without having to pay again?

Check the Mac App Store.
Anything you ever purchased (including Mavericks, "purchased" for $0) should appear on your Purchases tab, ready to re-download at any time.

Acurrate process to clone and transfer all the disk to another tiger computer....

Please guys would be kind enough to show me an easy and acurrate process which incude process to clone AND transfer all the disk from my powerbook G4 (10,4,11) to a macbook (2,1)also tiger computer 10,4,11....
(Carbon copy cloner or easier again you can think of....)
TY

Unfortunately, this can't be done. Although you are using the same OS version (Tiger) the PowerPC version (your G4) is not compatible with the Intel version (your MacBook). There was never a Universal Binary (version compatible with both platforms) for Tiger. Apple only produced separate PPC and Intel versions. If you were to clone your PPC version over to your Mac, it simply wouldn't run at all.
You can use Migration Assistant which will move over all of your files and settings. However, none of the applications you have installed will run as they are all PPC. You would need to see if there are more current versions that are Universal Binaries.
I wouldn't really recommend migrating at all between platforms. I would start with a fresh install of a more current OS on your MacBook and then reinstall your apps one by one. You can manually move over any personal files (pictures, music, office-type documents) by copying them over to a flash drive or by putting your G4 in Target Disk Mode.

EULA reapears after streaming the disk to another machine with Citrix Provisioning Services

Similar Messages

Maybe you are looking for