Evaluation period has ended trying to create a BizTalk project in Visual Studio 2013 ultimate

Hi,
I am doing a proof-of-concept with BizTalk, and I am using evaluation versions of everything involved, SQL server 2012 SP1, Windows server 2012, Visual Studio 2013 R2 and BizTalk 2013 R2.
All worked (relatively speaking) until I finally came to creating a BizTalk project in Visual Studio 2013 R2.
I installed the relevant BizTalk components on that machine (windows 8.1 32-bit, non eval) and then I get the BizTalk evaluation period has ended error message.
I am sort of stumped, I have a long while left on the evaluation period on all involved software, anyone knows what this is about?

Hi,
Try repairing the BizTalk installation.
Mark As Answer or Vote As Helpful if this helps.
DPS Bali: I repaired the BizTAlk installation and it worked!
Thanks a lot for your help!!

Similar Messages

Has anyone been able to install DAQ Assistant in Visual Studio 2013?

I would like to use DAQmx Hardware API Assistant to generate VB dot net 4.5 code in Visual Studio 2103. Ni says will only work up to VS 2012. Why can't the Hardware API code just be installed into VS 2013?
Thanks,
Jim

Hi Jim,
I would recommend using Measurement Studio with the DAQ Assistant. For information on how to do this, please see the link below:
http://www.ni.com/tutorial/4652/en/
Best wishes!
Amanda B.
Applications Engineer
National Instruments

Cannot connect to SharePoint online to create SharePoint App in Visual Studio 2013

I have an Office 365 account and I am trying to create a SharePoint App via Visual Studio 2013 Here are the steps:
1. Open VS 2013 and select Office/SharePoint > App for SharePoint (type the name) then click OK
2. I type in URL of the site (of course https://) and Select SharePoint-Hostedoption, then click Finish
3. I get the Office 365 authentication dialog box.
I type in the username and password and it opens the SharePoint in the same rectangular dialog box and it stays there and nothing happens:
link : i.stack.imgur.com/USYcG.png
link : i.stack.imgur.com/rlUpJ.png
If I click the close icon on the Connect to SharePoint dialog box that still shows my SharePoint online site, I get the following error :
link: i.stack.imgur.com/p1ztW.png
If I click on OK I get the Connect to SharePoint dialog box again
Link : i.stack.imgur.com/ZgyW9.png

Hello,
I'd ask in the
Office 365 Community.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Can't Create New Excel Project Visual Studio 2013 Office Tools The Project Cannot Be Created

I am having this issue on two computers. If I try to create an Excel 2013 Workbook C# in new projects, and choose create a new workbook, it starts to open Excel, and then I get this error in VS
I have tried:
Uninstall & Reinstall of VSTO from the Visual Studio Installer
Uninstall & Reinstall of Visual Studio 2013 Ultimate, (manually removing anything with visual studio that was left over)
Manually turning on the add-on Visual Studio Tools for Office Design-Time Adapter for Excel
Installing VSTO by hand
Enabling Macros
Running VS as administrator
Uninstalling & Reinstalling Office 2013 Pro Plus OLP
I have made this change to excel:
Like I said, this problem occurs on TWO pc's. I have tried 2013 Visual Studio R1 and R2. Does anyone have any ideas?
Edit 3-1-2015
There is still no answer to this, I have tried target frameworks:
4.0
4.5
4.51
And Running as Administrator. Recently I upgraded to the CTP of Visual Studio 2015 Ultimate and the same problem exists.

Thanks for the reply.
The issue is not reproducible for me and I can confirm this not a known issue. We might need to do deeper troubleshooting at the repro machines.
Because of its complexity your question falls into the paid support category which requires a more in-depth level of support. If the support engineer determines that the issue is the result
of a bug the service request will be a no-charge case and you won't be charged. Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Sangeeth,MSFT

How to create a site column through Visual Studio 2010?

I was trying to create lists, content type and site columns through Visual Studio 2010. But I could not figure out how to add site column? What item do I need to add for this and what kind of coding is to be done?

Try this
1. Create a Empty project in Visual studio.
2.The Empty SharePoint Project template does not include any Features in the Features folder. To add a new Feature to this project, right -click the Features folder, and click Add Feature. This adds a new Feature component to the folder; double – click the
Feature1 icon in Solution Explorer to modify the Feature ’ s
metadata using the Feature designer. The Title and Description values appear on the Features pages in Site settings. It is a good idea to make these values
descriptive so that administrators will know what they are adding to the site when they activate the feature.
The feature ’ s scope determines where the feature can be activated within SharePoint. Please Note – Certain components, such as site columns, content types, Master pages, and Page Layouts, are installed at the site collection level and made available to all
sites within the collection. These components require that the scope for the feature be set to “ Site. ”
3. Next, add a new item to the project (Right – click project name ➪ Add ➪ New Item) and select the Empty Element template from the Add New Item dialog box.
The Empty Element template is an XML fi le where you can enter CAML Field definitions.
Following is what you will add in your elements.xml file –
< Elements xmlns="http://schemas.microsoft.com/sharepoint/" >
< Field ID="{76C140E1-D827-433B-AD38-257F9594B846}"
Name="CustomCol"
DisplayName="My Custom Site Column"
Group="Custom group"
Type="Text"
Required="FALSE"/ >
< Field ID="{5F516D92-969C-4661-81B9-C9210E2A2FDC}"
Name="Choice Type"
DisplayName="My Choice Type"
Group="Custom group"
Type="Choice"
Required="FALSE" >
< CHOICES >
< CHOICE > Medical < /CHOICE >
< CHOICE > Dental < /CHOICE >
< CHOICE > Vision < /CHOICE >
< CHOICE > Insurance < /CHOICE >
< /CHOICES >
< /Field >
< /Elements >
4. To deploy the Site Columns defined in the Elements file, right – click the project name in the Visual Studio Solution Explorer, and select Deploy. This will deploy the solution file to the solution store and activate the Feature in the targeted site collection.

How do I get rid of "Your Free Trial Period has ended" Screen when trying to open pdf in the Reader

Hi
How do I get rid of the "Your Free Trial Period has ended" Screen when trying to open a pdf in Adobe Reader?
I had a trial of Dreamweaver but it was too complicated for me.
There was no where to cancell the free trail so I let it run its course and expire. It then deleted the programs which is fine (I didn't want to buy them) but it also deleted my Acrobat Reader.
I have re-installed that but when I try to open a pdf, all I get is the "Your Free Trial Period has ended" screen which only allows you to buy or exit and them exits all together.
Needless to say I am very UNIPRESEED with Adobe for messing up my programs and now they want to charge me $29 dollars to sort out a problem they created.
Can anyone help me to sort out this very anoying problem?
Regards
David

Hi
Thank you for the reply.
No I have not deleted anything, this all happened automatically when the trial period ended.
Other than an old version of Photoshop (version 7, for which I do have a serial number, I don't have any other Adobe software - just the reader which is now not working)
I was trialling Dreamwever but couldn't get started with it so am paying someone else to set up the website using Wordpress.
David

Error while running maintenace plan "Integration Services evaluation period has expired."

We are getting below mentioned error while executing SSIS package or maintenance plan.
Executed as user: ICROSSING\*****. Microsoft (R) SQL Server Execute Package Utility
Version 11.0.3381.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.
Started: 3:35:00 PM Error: 2014-02-23 15:35:01.56
Code: 0xC0000033     Source: Db Engine database Log backup
Description: Integration Services evaluation period has expired.
End Error Error: 2014-02-23 15:35:01.58
Code: 0xC0000033     Source: Db Engine database Log backup
Description: Integration Services evaluation period has expired.
End Error Could not execute package because of error 0xC0000033.
Started: 3:35:00 PM Finished: 3:35:01 PM
Elapsed: 0.671 seconds. The command line parameters are invalid.
The step failed.
We have license BI edition of sql server 2012. Other services and database are working fine. Issue with integration service only.
Please help me sort out the issue.
Thanks,
Shitalkumar Kasliwal

Hi Shitalkumar,
The issue may occur if Evaluation Edition or CTP Edition of SQL Server was installed earlier on the server, however, the previous instance of SQL Server was not uninstalled completely or upgraded to Business Intelligence Edition successfully. To resolve
the issue, modify the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\110\ConfigurationState registry key value from 1 to 3, and then rerun the Edition Upgrade procedure from the SQL Server install media to upgrade the SQL Server components to the
licensed edition again.
Reference:
http://support.microsoft.com/kb/971268
Regards,
Mike Yin
TechNet Community Support

CS3 says "trial period has ended" and demands license key - I own the product! but can't find the key

I bought CS3 a couple of years back, and have been using it without problems ever since. All of a sudden I try to open it today and it says "Trial period has ended, please enter license key". The trouble is, I have no idea what the key is, when I bought the software I did it online with a work email address and I no longer work for that company so there is no way of tracing the email from my end.
has anyone experienced this? Any help gratefully received, I really need to do some work! and I don't really want to pay for PS all over again.
Many thanks.

I registered my CS4 with Adobe in August 09 and have been using it ever since. Until today when trying to open InDesign I get a window that says Software Setup wants my registration code. It says I have two options - Use this on a trial basis, or enter registration code, which I did and it says it's invalid.
I downloaded the tool you mentioned, but it wouldn't run saying it was missing a .dll file.....
I didn't buy from Adobe, but if it was pirated wouldn't they have been able to tell when I registered it?
I started a case with Adobe support, but from what I'm reading I don't expect much!
Any Ideas?

SQL Server 2012 Standard saying its Evaluation period has expired

We installed SQL 2012 Standard on a server and have since created a 1TB SQL server database. Suddenly, we started receiving an error when opening the SQL management Studio that our evaluation period has expired. We purchased 2 licenses of Standard
2012 and installed it on two servers. One is working fine, and the other is saying it had an evaluation copy.
According to our VLSC account, there isn't a product key required, so I can't run the edition upgrade to upgrade it to standard. Is there a way we can get the license converted without risking the 1TB database we created?

Hello,
Sometimes the media provided when you buy the licenses have the product key prepidded. You may find the product key shows by itself
when you reach the Product Key page of SQL Server setup. Please try that?
An edition upgrade won’t delete any data or configuration of the SQL Server instance. Please read the following article:
http://www.sqlcoffee.com/SQLServer2012_0015.htm
In some cases, even when you have performed an edition upgrade to a licensed edition, you still get that evaluation edition error message.
If that is the case, please read the following thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/9e50de75-6119-4963-8d5e-9d8b0367bc8e/evaluation-period-has-expired-sql-2012-ssms?forum=sqlsetupandupgrade
(Allen Li)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How do I uninstall once the trial period has ended? The instructions say to de-activate the software, but the only option I am given is to enter a serial number. Thank you

How do I uninstall once the trial period has ended? The instructions say to de-activate the software, but the only option I am given is to enter a serial number (I can't get to a place where I can go to help and de-activate).. Thank you

Mobriennc which operating system are you using? Which Adobe software title are you currently evaluating?

I have the Photoshop Photography Program and every time I try open Photoshop CC it asks me for a Serial Number. It keeps saying my trial period has ended. How can I get this working since Adobe doesn't issue Serial Numbers for CC.

I have the Photoshop Photography Program and now every time I try open Photoshop CC it asks me for a Serial Number. It keeps saying my trial period has ended. How can I get this working since Adobe doesn't issue Serial Numbers for CC.

Jodie84,
I have just checked your account and found that you indeed have bought a Creative Cloud for Teams subscription but you have assigned the single seat to another user hence you ( If you are using your own Adobe ID ) are getting the trial error message.
Two options : Either reassign the seat to your self or add an additional seat and invite your self in the same Team.
Cheers,
Kartikay Sharma

I have purchased Creative Suite 6 and it keeps asking to sign in and put in product code. Says "trial period has ended." I purchased the suite and have the disk.

I purchased Adobe Creative Suite 6 (have the disk). But now it keeps asking me to sign in and reenter my product code. Says "Trial Period has ended." There was no trial period. I purchased the suite. Very annoying to have to keep logging in. How do I fix?

Thank you Benjamin.
I may reinstall. It wont let me continue until I have entered the product code. Says "trial period" has expired.
Thanks again,
Jim

How can I quit the photos app? It has been trying to create a library for hours but nothing happens. when I try to quit, it won't let me.

How can I quit the photos app? It has been trying to create a library for hours but nothing happens. when I try to quit, it won't let me. Have just upgraded from iPhotos so don't want to lose any content.

How can I quit the photos app? It has been trying to create a library for hours but nothing happens. when I try to quit, it won't let me. Have just upgraded from iPhotos so don't want to lose any content.
Force-quit Photos as recommended by Arsenal1607.
Make backup of your iPhoto Library and run the iPhoto Library First Aid tools to repair the permissions on your library and rebuild the iPhoto Library.
To launch the First Aid Tools hold down the alt/option and the command key simultaneously while double clicking the iPhoto Library to launch the iPhoto Library First aid tools. You'd to hold down both keys firmly and long enough, until the First Aid panel will appear.
Try both the options "Repair Permissions" and "Rebuild library". Then try again to migrate the iPhoto Library to Photos by dragging it onto the Photos icon in the Dock.
Make sure, you have plenty of free storage. Don't try the migration, if you are running out of storage.

Why does it keep saying your trial period has ended when I have bought Photoshop Elements 12

Why does it keep saying your trial period has ended when I have bought the product and registered it with you?

In addition to activating, you also need to sign in with your Adobe ID. Have you done that as well?
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Evaluation Period has expired - SQL server Management Studio

I am new to this environment and I have an issue with SQL studio management – it says
“Evaluation period has expired. For information on how to upgrade your evaluation software please go to
http://www.microsoft.com/sql/howtobuy”.
The questions I have are :
1. How do I know what version of SQL I am running ?(since I cant go through studio management)
2. I can see sql server 2008 r2 on the program files- does that mean SQL management studio is 2008 R2?
3. How do I upgrade to a proper version ? – Is it through “installation center “ on program files ?
4. Will the upgrade stop any SQL services?
Many thanks guys – Im fairly new to sql troubleshooting – I have only done direct installations in the past.
Regards, MassonTech

Hi Guys
Many Thanks for your reply.
I have managed to find the version of SQL server 2008 R2 running through the registry and it says :
Edition: Standard Edition
Edition Type : Standard Edition
But i can not find any indication that an evaluation copy was initialy installed. - I have been asked to suggest an upgrade path. My question is ? am i upgrading just SQL management studio ? or SQL server 2008 R2.
Also , if SQL is expired - i presume something should stop working (in terms of database etc) But in my enviroment - everything seems fine except the error message when you try to lunch SQL management studio.
Regards, MassonTech
I guess you have multiple instances or versions of SQl server installed on your machine.Please use below link to run a discovery report and paste result here so that we can understand
http://blogs.msdn.com/b/petersad/archive/2009/11/13/sql-server-2008-discovery-report.aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
I have performed the above, please see below the output - Please could you advise on what next?
Product
Instance
Feature
Lanugauge
Edition
Version
Sql Server 2008
DAV01
Database Engine Serveices
1033
Standard
10.0.1600.22
Sql Server 2008
DAV01
SQL Server Replication
1033
Standard
10.0.1600.22
Sql Server 2008
DAV01
Analysis Services
1033
Standard
10.0.1600.22
Sql Server 2008 R2
Management tools basic
1033
Enterprise Evaliation
10.50.1600.1
Sql Server 2008 R2
Management tools Complete
1033
Enterprise Evaliation
10.50.1600.1
Sql Server 2008 R2
Integration Services
1033
Enterprise Evaliation
10.50.1600.1
Regards, MassonTech

Evaluation period has ended trying to create a BizTalk project in Visual Studio 2013 ultimate

Similar Messages

Maybe you are looking for