Event ID : 372 Print Service message while printing on Windows 8

I get meaningless error message on Windows 8 after every application print job with HP Laserjet P1606dn. The Win 8 popup error msg says "Error Printing on HP Laserjet Professional...The Printer Couldn't Print .....". The corresponding Event Manager error is:
"Event 372, Print Service
The document Print Document, owned by Mark, failed to print on printer HP LaserJet Professional P1606dn. Try to print the document again, or restart the print spooler.
Data type: RAW. Size of the spool file in bytes: 312352. Number of bytes printed: 312352. Total number of pages in the document: 1. Number of pages printed: 0. Client computer: \\DELLW. Win32 error code returned by the print processor: 0. The operation completed successfully."
The print job then prints perfectly.
Historically, my Event Viewer shows these errors in clusters. This cluster began on 8/25/2013, the same day I replaced my network router with a Frontier Netgear Model B90-755044-15 Rev 3. I assigned a new static IP address to the printer after the router replacement, and uninstalled / reinstalled the printer on each machine so they would recognize the new IP address. I also updated the printer's firmware from version datecode 20120130 to 20130703 at that time (in retrospect, I should never have updated firmware on same day as the network changes). Errors have appeared ever since. Updating the software driver version from 20100406 to 20120926 today did not fix the problem.
The previous Event 372 cluster was limited to a single day, 2/9/2013. I don't see any obvious print-related errors on 2/9 except about ten 372s scattered through the day and two 823s preceding the 372s (823 is informational and says I changed default printer).
A shared (USB connected to one pc) HP Photosmart printer never generates these errors.
The same Laserjet P1606dn printer is accessed by three different Win 8 machines over wired (1 pc) and wireless (2 pcs) network connections, and all three now get the same annoying and misleading error message even though their print jobs print perfectly.
Also, installing Full Solution driver (instead of Basic driver) did not fix it. Disabling Kaspersky firewall did not fix it.
Exception: when configuration page is printed from the Control Panel > Devices and Printers printer icon > Printing preferences... > Services tab > Print information pages, then the error message does NOT appear. Error only appears when printing from common applications (Word, etc.).

Can an HP expert please comment on this thread, including the link given in previous post to Windows 7 Forums?
Is anything lost by disabling bidirectional communications for my HP Laserjet P1606dn in order to eliminate spurious error messages?
Is there a bug in the HP driver causing this error?
Is bi-directional communications a separate communications interface which should simply be ignored and unchecked when using wired ethernet or wireless communications?

Similar Messages

UNABLE FOR 6 MONTHS TO PRINT ANY MESSAGES-MY PRINTER OTHERWISE WORKS FINE

I used to be a comcast.com user. After switching to att.net,. six months ago, I have not been any longer able to print any E-mail messages, particularly documents I have received. My printer works fine to print anything from Hi-res photo-shop CS3 photos, letters I write, or anything I generate that is not an E-mail message I receive. I asked the AT &T service man that installed my UVERSE service and did not have an answer. Six months and ongoing, is not the answer to this problem. I do need help to solve it. I even bought this week a new MacBook Pro more powerful and faster. Please!, help me.
Sincerely,
Felipe N. Gajate - [email protected] - 3056773602

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

Printer Error Messages When Printing PDF Documents

I keep getting the following error messages when I try to pring a PDF document. This application has failed to start because LXBBGF.DLL was not found. Reinstalling the application may fix this. The other error message is: Cannot load library LXBBPRP.DLL using default error 126. I spent over and hour with a Lexmark Tech. who unsistalled my Lexmark X75 printer and he did a register edit to make sure my register was cleared of all the old Lexmark entries. He then reistalled the printer and the drivers, but the error message still pops up when trying to print a PDF Document. He checked out the printer and it will print and scan all other types of documents with no error messages. He also had me unistall Acrobat Reader 11.0 and reinstall it. I also did a sytem restore but none of the remedies I have tried so far has fixed the error messages issues. I would like to get this problem resolved as soon as possible because I need to print my travel documents asap. This forum is great but can someone please let me know how to get in touch with Adobe Technical Support. I need their toll free phone number and email address?

Hi Pat,
When I first encountered the PDF printing problem I went to the Adobe Web Site and downloaded the most current version of Adobe Reader which was the 11.0.6 version and the Lexmark Technician uninstalled the old driver and installed the updated version of the printer's driver. But this did not resolve the PDF printing problem. Both before and after the PDF printing problem surfaced I was able to print all other document formats except PDF documents.
It seems very strange to me that once I uninstalled the Adobe Reader 11.0.6 and reinstalled my old version of Adobe Reader 9.3.3 that all of sudden I was able to print all of my other PDF documents. But that's what happened and Adobe still insists that it was a printer issue. I did a little research and this is not the first time Adobe has had compatibility/configuration issues with Lexmark printers and they have not resolved these issues.
I know I am taking a chance by using an unsupported unsecure version of Adobe Reader, but at this time I don't have any other option. Unless Adobe develops a patch/workaround solution. Which I hoping they will do, but I don't think this is going to happen soon because this issue is not a high priority as it only effects a small portion of their customer base.
Thanks For Your Input/Comments
Edd

How can I fix a printing problem: message cannot print document: "no pages selected to print" when printing a pdf file.

I am having problems printing a pdf document. When I select a file to print and try to print it says that "no pages selected to print". The default all pages was selected by me but the message keeps coming up. I recently installed adobe reader version 11. Rebooted the computer but sitll having issues printing docs.
Jerseyguy

Hi Pat.
Yes, both of them lead to the very same error.
I have a workaround, kind of, where I preview the document and select all the pages that are correct (read showing on the pages preview) as included in the 1st screenshot.
As you can see in the first screenshot, the 5th page seems to be non-existandt, however as I try to preview it from the 3rdP software, it comes up just fine and from there I can print it individually... just annoying when you have 50 pages and 6 of then are randomly not showing up.
If I try to print the whole document, it simply gives me the 2nd, 3rd and 4th screenshots.
As for the 3rdP software, as stated in prior posts, it has been working flawlesly for the last 5 years, and has not been updated in any way, shape of form... As you said, maybe it wouldn't be a bad idea to look into that, however I don't believe the contract for the software maintenance is still in effect...
Thanks.

Hole print service on a print server is affected by few offline printers

Hello,
We have branch servers with Windows Server 2008 R2 hosting AD, DNS, File, WSUS and Print roles.
Most of them are in remote locations with very bad electricity connection (UPSes are on the way), we experience unexpected shutdowns of the servers and print devices as well.
After the server is turn on, it can't start it's print spooler service. As some of the printers are offline and users continue print on them.
To solve the issue we have to clean files (jobs) from C:\Windows\System32\spooler\printer and start the print spooler service.
Our idea is to create a schedule job witch to trigger deletions of the files and starting/restarting of the spooler.
It bugs me as I believe the print server should be able by it's self to handle the jobs of the offline printers.
Do you know for such option or I should go with the scheduled task to clean the jobs?

First off change the Spool directory. If you have an alternate partition on the machine or another drive, configure the spool directory to the alternate disk. At very minimum set it to c:\spool.
I'm not sure what the situation is with your data. Rebooting the server will not impact jobs spooled to the disk. They will be rescheduled when the spooler service starts after the reboot.
I have had corrupted SPL data when the system is not cleanly shutdown. Normally the corrupted files are discarded.
Alan Morris Windows Printing Team

Printing Selection-Screen while printing ALV Grid output display

Hi,
I have a requirement wherein I want to print the Selection Screen also while printing the output in simple ALV grid Display.
Currently when I print the ALV output report, only the header and the Body of the ALV is getting printed. But the requirement is that I also want to print Selection screen along with this.
If anyone has faced a similar situation, plz let me know what needs to be done in order to print the selection screen also while printing the ALV report output.
Rgds,
Nitin

Hi,
You can use given function module to print your
selection screen
RS_REFRESH_FROM_SELECTOPTIONS
>This will get Current contents of selection screen
RS_LIST_SELECTION_TABLE
>This will Generates list according to values in selection table(RSPARAMS)
Sample
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
       EXPORTING
            curr_report     = p_repid
       TABLES
            selection_table = it_int_tab
       EXCEPTIONS
            not_found       = 1
            no_report       = 2
            OTHERS          = 3.
IF sy-subrc EQ 0.
    WRITE:1 'Selection Criteria'(i19),
         /1 sy-uline(18),
         /1 'Variant Name'(i21),
         23 sy-slset.
*-- This function module lists the Selection Screen contents
    CALL FUNCTION 'RS_LIST_SELECTION_TABLE'
         EXPORTING
              report        = p_repid
              seltext       = 'X'
              newpage       = space
         TABLES
              sel_tab       = it_int_tab
         EXCEPTIONS
              sel_tab_empty = 1
              OTHERS        = 2.
Mark all helpful answers

Display Do u want save changes or not? message while closing the window

Hi All,
I have one requirement.I developed one form that contains 4 windows.
I entered in the 3rd window and i have made some changes but not saved.when i close 3rd window it is not giving any message like 'Do u want save changes?'after closing the 3rd window cursor will go to 2nd window.if i open 3rd window again it is propmting the message(Do u want save changes or not?).How can i get this message while closing the 3rd window?
i have written the following code in app_custom body
IF (wnd = 'WINDOW1') THEN
app_window.close_first_window;
ELSIF (wnd = 'WINDOW3') THEN
lv_wnd_status := get_window_property('WINDOW2',VISIBLE);
IF lv_wnd_status = 'TRUE' THEN
     go_item('BLOCK2.ORDER_NUMBER');
     set_window_property ('WINDOW3', visible, property_false);
ELSE
app_window.close_first_window;
END IF;
     ELSIF (wnd = 'WINDOW2')
THEN
lv_wnd_status := get_window_property('WINDOW3',VISIBLE);
IF lv_wnd_status = 'TRUE' THEN
set_window_property ('WINDOW2', visible, property_false);
ELSE
app_window.close_first_window;
END IF;
     ELSE
app_window.close_first_window;
END IF;
Can anyone give me some idea.
Thanks in Advance
Edited by: DhanaSurya on Apr 27, 2010 9:41 PM

Iis this the only code which you used to hide/display window?
Might be some navigation is happening in your form. Like if there is relationship between window2 and window3's block and when you access the window2 then you try to move to the next reocrd and then you are try to go to the WINDOW3's block.
Or there is any CLEAR_BLOCK built-in bieng use in you form.
-Ammad

Error message while printing sales order

The following message was displayed while trying to print a sales order from a particular computer. Logging in on another computer with the same credentials worked fine. any thoughts?
Error in file Temp (bea4fc21-346f-4d31-93d6-8260b04be0a4)-(B002A516-3EB2-47FF-BAE7-3941126D5257).rpt:
Error in formula Record Selection:
‘(OCTG.GroupNum) = (?Pm=OQUT.GroupNum)’
This field name is not known
Details: errorKind

Hi,
Similar error found with different layout. Check SAP note,
1830583 - Error message pops up when printing or previewing
marketing documents with items managed by batches via CR layouts
Thanks & Regards,
Nagarajan

FM SSF_CLOSE failing and giving error message while printing a smartform

Hi,
for language spanish the smartform is not getting printed for output type SG11 but for english it is getting printed? What could be the reason? I debugged and found that SSF_CLOSE is failing and giving error message.
Thanks and regards,
AP.

Hi Aparajita,
for changing from one languages to another translations in SE63 is to be done, either search on SCN for using SE63 , or atleast see these wiki help .
Transaction SE63 - Translation Tools for Translators (BC-DOC-TTL) - SAP Library
Transaction SE63 (SAP Library - Translation Tools for Translators (BC-DOC-TTL))

Annoying messages while printing

I bought an HP printer. I choose to use off-brand ink cartridges. Why do I have to be harassed by a popup message every time I print reminding me that I am not using HP cartridges? I am aware of the risks of damage, etc. but I have made my free choice because HP's cartridges are too expensive. I can't support HP's profit center in this instance. How do I turn off these harassing messages? If i can't, then this printer (PHOTOSMART 7520) is probaby the last HP product I will ever purchase.
This question was solved.
View Solution.

What operating system? It may help to turn off bidirectional communication. In Windows 7 you would click Start, Devices and Printers, right click on the printer, Printer properties, Ports, uncheck the "Enable bidirectional support", Apply, OK.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Print Services : How to Print to a (Postscript) File ???

Hi Forum,
for quite a while I'm thinking about migrating our print server to Mac OS X Server, unfortunately I could not find a way to easily create and manage multiple "Pritn-to-File" queues.
More precisely: what I would need is the ability to create Postscript spoolers on OSX Server which would just operatelike a virtual Printer, showing up on the network as shared but having no real printer on the other side! Just receiving the Postscript files (without limitations on size, media and colors) and dropping it into a predefined Folder on the Server. Sounds so easy...
Thanks in adavance for any help!

First the USB stick needs to be formatted in a format the frame can see. That is usually FAT32, the Windows and mostly Universal format (It probably already is formatted like that).
Next is what photo cataloging and editing program are you using? If it is iPhoto you need to Export the image or images you want to place on that card/stick. Not sure how that is done exactly as I don't use iPhoto but it is one of the menu item options (Could be under the File menu item).
Then during the export it should ask you where you want to exprt them TO. you would browse to the USB stick and select it. If it Auto places them on your dekstop then use Finder to coy and paste them from your desktop to the USB stick. Or you can try Drag & Drop (I personally never use that as I've never like it) from the Desktop to the USB stick.

Arrgggh!!! iphoto print services...prints look awful

Here is my workflow.
canon RAW -> lightroom -> export (sRGB) -> import into iPhoto (embed colorsync profile)
lightroom 1.4.1, iphoto 7.1.5
If I print to my HP2600 from lightroom or iPhoto using colorsync the prints look great. But when I order from Apple Photo Services through iphoto, the prints are dark and washed out. I would like to order some calendars and books but not with the horrible quality of prints.
How can I troubleshoot this?
Thanks in advance.

Ditto here on wrong colors in items ordered from APPLE.
I just received a book I ordered and the color of all images aren't what I submitted. They're all darker and, in some cases, pinkish.
I checked them using APPLE preview proofing process, and the preview proof looked great... exactly what I had intended.
The images were old photos scanned in, and I did color corrections as well as cropping. Yet, I've done this in previous books and have had fabulous results.
Am interested to hear if anyone has any solutions because maybe I'm doing something with color corrections I shouldn't be doing?

MX452, appears to be connected but cannot print, error message "the printer is offline"

Hi everybody, I recently moved and lost the USB cord that I used for the computer to be hooked up to this printer. I followed all of the directions on how to set up the wireless printer without the cord. I got the message at the end that said I was connected, but I still cannot print! I keep getting a message that says "the printer is offline." PLEASE HELP!
Thank youDani =)

Hi DaniWok!
Welcome to the Canon Forums and thanks for your post!
To have a better understanding of your issue, please let everyone know what operating system (Windows Vista/7/8 or Mac OS 10.X) you are using. That way, the community will be able to assist you with suggestions appropriate for your product.
Any other details you'd like to give will only help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks!

My iPad can detect my wireless printer, but when I select 'Print', the message 'The printer is offline' appears.

I am able to print to the printer with other devices no problem (my laptop, etc.). It originally did work for about 2 months, then suddenly stopped. I have the same problem with my iPhone. We have since changed our wifi hub, but the same problem has persisted.
It seems strange to me, that when it searches for a printer, it can find the 'Canon MG5350 Series' but then says it is offline when it begins to print.
Any help would be greatly appreciated, as this has been driving us nuts!!

If you have change your Wi-Fi hub (router) you must run the CD provided again to put iPad and printer on the same network.
The CD will put new SSID and Wi-Fi password into printer.

Startup error message while starting up Windows after installing NI Circuit Design Suite 10

Hi.
I recentely acquired NI Circuit Design Suite Student Edition v10.
After installing it on my computer I began receiving the following error message everytime I booted up Windows.
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I checked the Windows logs and found other error messages when the system booted:
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date:  12-01-2008
Time:  13:17:54
User:  N/A
Computer: THINKPADT30
Description:
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 6e 69 64   ure nid
0018: 6d 73 72 76 2e 65 78 65   msrv.exe
0020: 20 34 2e 37 2e 31 2e 38    4.7.1.8
0028: 20 69 6e 20 75 6e 6b 6e    in unkn
0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
0038: 30 2e 30 20 61 74 20 6f   0.0 at o
0040: 66 66 73 65 74 20 30 30   ffset 00
0048: 37 66 63 36 36 66         7fc66f
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1004
Date:  12-01-2008
Time:  13:18:51
User:  N/A
Computer: THINKPADT30
Description:
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 6e 69 64   ure nid
0018: 6d 73 72 76 2e 65 78 65   msrv.exe
0020: 20 34 2e 37 2e 31 2e 38    4.7.1.8
0028: 20 69 6e 20 75 6e 6b 6e    in unkn
0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
0038: 30 2e 30 20 61 74 20 6f   0.0 at o
0040: 66 66 73 65 74 20 30 30   ffset 00
0048: 37 66 63 36 36 66         7fc66f
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1001
Date:  12-01-2008
Time:  13:21:33
User:  N/A
Computer: THINKPADT30
Description:
Fault bucket 619997672.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 42 75 63 6b 65 74 3a 20   Bucket:
0008: 36 31 39 39 39 37 36 37   61999767
0010: 32 0d 0a                  2..
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7034
Date:  12-01-2008
Time:  13:18:12
User:  N/A
Computer: THINKPADT30
Description:
The National Instruments Domain Service service terminated unexpectedly. It has done this 1 time(s).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I checked the forums at NI and found a similar problem with a computer with Windows Vista installed. I have Windows XP Professional installed on the computer, but tried the update through the self updating feature of the NI software.
After the update the problem remains exactly the same.
To find out more about the error, I checked several Windows properties to identify the cause of the problem. One thing I found was on the Services control, under Administrative Tools. After the error message during boot, the services window shows up 2 services whose status is "Stopping" and the startup type is "Automatic". This services are:
Lookout Citadel Driver
National Instruments Time Sincronization
I'm using an IBM ThinkPad T30 (Type 2366-BG1) with Windows XP Professional with 768Mb of memory, 80GB HDD.
Can anyone give me some hints on this matter?
Thank you in advance.

Good morning.
I tried the steps suggested but the problem remained. I then decided to try some aditional steps and apparently the problem is solved. I describe the steps I took bellow.
The problem was related to my antivirus / firewall solution, Panda Antivirus + Antispyware 2007.
1. I changed the previously mentioned Windows services startup to "Manual" instead of "Automatic".
2. Rebooted the computer.
3. Opened the services control in Administrative Tools.
4. Selected the first service "Citadel..." and pressed the "Start" button.
5. After a few seconds, the firewall solution presented a window stating that the program was attempting to access the internet (or my LAN). I selected "Always allow".
6. I repeated this step for all the others NI services. Some produced the same feedback, others didn't.
7. Changed the startup type of the services to the values I had written down before.
8. Rebooted the computer and everything worked fine.
It seems my firewall solution is unable to cope with a program trying to access the Internet (or network) before a user logs in.
Thank you for your support.
Best regards,
Alexandre Ventura
Message Edited by AlexandreV on 01-25-2008 04:56 AM

Event ID : 372 Print Service message while printing on Windows 8

Similar Messages

Maybe you are looking for