Event Orders in CM25 not re-scheduling in correct sequence

Hi, I have the following issue where I have a block of process orders dispatched which need to be rescheduled to a later date.  I can do this by selecting the group and dragging and dropping, but there are some event type (ZPE1) process orders which are used to capture changoevers in amongst standard process orders, and each time I reschedule the block, the event orders fall out of sequence and are pushed to the end.
Would really appreciate any feedback on this as we are having to manually re-insert the event orders to the correct dates/times every time we reschedule

Hi Alan
Thanks for sharing the solution!
BR
Caetano

Similar Messages

  • Photo event order on iPhone not matching iPhoto Oder.  Help

    This has been driving me crazy.  I have all of my photos organized in events in iPhoto.  They show up in the right order.  When I go into iTunes I can see all of my events and they are still in the correct order.  But when I sync with my iPhone 4 or 5 events that are in the middle of the pack in iPhoto show up as the last albums in the photo albums on my iPhone.
    - I'm on Lion
    - I have new iPhone 4s
    - I'm using iPhoto '09 8.1.2

    , but when I copied them to iphone 6,
    How were you getting the photos onto your iPhone by copying them?

  • Custom counter not labeling clips in correct sequence

    Anyone know why my custom counter feature is no longer assigning numbers to my clips in the right order?  I have a series of clips -- say an interview -- I select them all in sequence, and then using custom name and counter I expect to see them numbered sequentially.  Instead what I get seems random.  It has the right range of numbers associated with the clips but the sequence is all screwy.  When I apply the original camera names to the clips, however, it puts them in the right sequence.  Could have started when I upgraded to 10.0.3.  SUggestions???

    Yeah, the problem is still there.  I did get a call into Apple last week and had a fairly lengthy and encouraging conversation.  They were apparently unaware of this problem but were again able to reproduce the problem on their end.  The dude was quite empathetic regarding my frustration that 2 updates later the problem still exists.  So... I'm keeping my fingers crossed for 10.0.6, or better yet 10.0.5b.

  • Purchase order history not displayed in correct sequence

    Hi all,
    We are on SRM 7.1 ECS.
    The issue we are facing is that the follow on documents for the PO i.e.
    confirmatin and Invoice are not displayed in the correct sequence i.e. the sequence in which the documents are displayed is :
    Invoice>confirmation>shopping cart-->PO
    Any idea if this is a std feature or a bug?

    Hi
    Pl find the content of the notes.
    Note 1524928 - History: Order of related document is not consistent.
    Symptom
    In some cases, when you go to the shopping cart item history, the system displays follow-on documents in a wrong order.
    Other terms
    History.
    Reason and Prerequisites
    Program Error.
    Solution
    Implement the attached correction instructions or apply the relevant Support Package.
    If  the note is not released , pl raise a OSS to get this note released.
    Regards
    velu

  • Error in Sales order - Consumption account not found

    Hi Gurus,
    I am facing an error in Sales order - 'Consumption account not found'. The scenario is third party. In sales order, it says 'Consumption account not found'. the item category is TAS and scedule line category has general modification key 'VKA'. And as it is third party, thr is no movement type for the schedule line category. The valuation  class of the material is 3334 (software services). I was thinking In OBYC, under GBB key, this combination of my val. grping code+ 3334 + VKA and relevant GLs shud exist.
    But in my development client, i dont get any error for the same material. And in thr also, thr is no mention of entry like above combination in OBYC. So its making me think that its not config error. But its an issue of master data or GL data.
    Please help me . This is critical.
    -Prashant

    Hi,
    Your observation is perfectly write, the possible errors are
    1.  Check the combination of Account modifier of Purchase order account assignmnet or PR.  Based on the modifier and check the relevent combination in OBYC
    Valuation ClassAccount ModifierIf Groups is there + Transaction Event Key + Gl Accounts
    2.  If GL Account is available then check the GL Master through FS00 for validation of mandatory consumption is required and i feel there is no issue with material master.
    Rewards if it helps
    Regards
    Goutham

  • System is not firming schedule line automatically

    Hello,
    I want to know how the end and start date of planning time fence is calculated and why system is not firming schedule line automatically.
    In Material master I am using MRP type P1 and GR processing time 1 day, planned delivery time 1 day, planning time fence is 7 days. Lot size key EX
    Today is 19.11.2008. And I have requirement of this material coming from FG on 20.11.2008.In MD04 transaction system is showing End of planning time fence is 28.11.2008 which is fine as per material master (+ 7 days excluding sat & Sunday).
    When I run MRP for FG, system generates schedule line for this material procured form vendor for the required qty on 28.11.2008 with exception message (30-Plan process according to schedule20.11.08).
    As per firming type P1 system should automatically firm the order since requirement date is on 20.11.2008 and it should show the schedule line on 20.11.2008 not on 28.11.2008
    But when I change the delivery date manually from 28.11.2008 to 20.11.2008 it firms the schedule line.
    Please suggest what can be the solution
    Regards
    Nanhe Babu

    Dear,
    Check your MRP type and Planning time fence defined in mrp 1 view of material master?
    Firm zone (go-ahead for production)
    One of two periods specifying the degree to which the delivery schedule lines of a scheduling agreement release are classified as firm or semi-firm.
    Use
    ! Firm zone I Trade-off zone I
    !--!-II> Days
    SA release creation date Schedule line date
    Firm zone: (go-ahead for production)
    If the date of a schedule line lies within the firm zone, the vendor has the go-ahead to produce the relevant quantity with the assurance that the orderer will bear any and all material and production costs associated with the scheduled quantity in the event of subsequent cancellation by the latter.
    1. Another way of handling your issue is by using the manual firming .
    2. In mdo4 in the Edit menu u will find a Set firming date.
    3. Now you can select this and this will give u a popup for entering a date.
    4.When u give a date in this and hit enter.
    Also please note delivery schedule lines in ME38 (even it is created automatically), in Planning time fence, will get affected by MRP run.
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Open Sale Order Value (FD33) not getting diminished even after closing SO?

    Hi,
    Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
    What could be the reason ?
    Pls help.
    Regrds,
    Binayak

    Hi Binayak,
    As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
    Some precautions
    1. Always run the program in background by scheduling a job.
    2. The idle time is around midnight when no user is working on SAP.
    3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
    4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
    Hope this clarifies..
    Regards,
    Madhu.

  • Sale order no . can not be displayed in md04

    HI ALL
    sale order no . can not be displayed in md04
    Surendra

    Hi
    What ever line items displayed in MD04 are relevent for MRP.
    If yoursales order is not displayed , it is not relevent for MRP. Pl. coordinate with your SD collegue for configuration of sales order .In that pl. chk schedule line category.
    Pl. chk these items.
    Regards
    YMREDDY

  • While creating the Transfer Order system is not picking Sale order stock?

    Hi All,
    In the B2B  process the system is not picking the stock from from sale order stock while creating the transfer order? Please suggest.
    Summary : Here we are creating the PR in the sale order and STO is created using the same PR to procure the materials from the WM plant to sale order plant. Since here intialy we are moving the stock to our sale order in WM plant and then picking the same. But while creating the Transfer order system is not picking the sale order stock in WM plant.
    Regards.

    C S Javali
    Check in schedule line in transaction flow whether Transfer Req /assembly is checked or not
    Regards
    Pradeep

  • Certain Maintenance Plan not getting scheduled in the background job

    Hi Gurus,
    I am facing an issue here.
    A weekly background job (RISTRA20) runs every weekend and schedules the maintenance plans.
    But we have noticed that some maintenance plans are not getting scheduled. i.e no orders or schedule is getting generated.
    When I run IP30 manually for these plans then the schedule gets generated and orders get called.
    I have checked up the background job and it is running fine.
    Also, i have noticed a similarity in all these plans which are not getting scheduled. There schedule has been restarted (through IP10) at somepoint or the other.
    But i don't see any direct impact of this?
    Can any of you provide some help on this?? Points will be rewarded.
    Thanks and regards,
    Nitin Saini

    Hi Narender,
    Thanks for replying.
    The message number for 'Groups don't match' is ME303.
    I think this does not have anything to do with the restart as i have done further investigation.
    Whenever I run IP30 with sortfield input as AS02*, i get the error as mentioned above for a certain number of maintenance plans while the remaining plans get scheduled.
    If i run IP30 for any other sort fields, it runs fine and i don't encounter the error
    mentioned above.
    If you send me ur email address, i could forward you screen-shots of the issue.

  • MRP in third party scenario. System not creating schedule lines

    HI
    I am using third party subcontracting scenario. As i am purchasing material but i am not taking material in under my company. I am paying to my vendor but the delivery is going to my subcontractor.
    Here i am able to create planned order or purchase requisition. But MRP is not generating schedule lines for that vendor.
    Regards,
    Anand.

    Hello,
    Check the following settings.
    1. Source list active in Material master.
    2. Valididy of the source list.
    3. Any quota arrangement
    4. Purchase infor record.
    Note: all are OK, but still PR's only created, then check for the requirement date, if the requirement date lies before the validity of the source list then also system will create only purchase requisitions.
    for this calculation you have to check the lead time for procurement cycle you have to check. Based on this no. of days only system will try to create the procurement proposals.
    If the lead time is very high and this is going beyond the sourcelist validity, then also PR's only created.
    So there are so many possibilities. check for the above said things and revert back.
    regards,
    <Manick>

  • Item does not match schedule line (program error)

    Dear Experts,
    I Transaction VA02/VA03 when i put Sales order number  and try to get in to the system system through error and terminate the transaction
    ERROR is  "Item does not match schedule line (program error)" with Message no. V1427
    when i check Table level and analyse thr Debuging i found that
    Table VBAP line item 10 is missing and table VBEP line item 10 is there due to this miss match its shows above error
    Question
    Why and How it happen and how to fix this issue???
    Best Regards
    hanumant

    Check Note 442831 - V1427: Item does not match schedule line (program error)
    thanks
    G. Lakshmipathi

  • Item does not match schedule line (program error) in sap

    Dear Expert.
    Greetings!
    We are currently facing with this error (V1 427 item does not match schedule line (program error) in sap), when we open the sales order(VA02/03).
    The error  is occurring due  inconsistency on the database tables, some Item is in  table VBEP, but it is missing from table VBAP.  This is what is causing the error message.
    I checked various related notes - 442831 , 401463 , 389687  etc .  These are quite old notes and I am in release ECC 6.0 .
    Report SD_CONSISTENT_CHECK_EXT and SD_CONSISTENT_CHECK are already available.
    Bapi BAPI_SD_SALES is also active.
    Please let me know if anybody has any idea on the same.
    regards
    Praveen

    Hi,
       Refer the KBA:  1464620 - Error V1427: Item does not match schedule line   which explains the reason and the solution for the issue.
    Regards,
    AKPT

  • Need to create a sales order that does not create demand

    Hi,
    We need to create a no cost sales order - that does not create demand
    In our current set-up when we try to create a no cost sales order with a material ( It Cat = Norm) we see demand being created in MD04
    What configuration settings will allow us a deliverable order - that does not create demand (no MRP run?)
    Thanks,
    SM

    Hello,
    For this set of requirement i think the best option would be to configure a New Sales Order Type and a new Schedule Line Category. In VOV6, While you are defining a new Schedule line category in the transaction flow make sure to switch off the three check box.
    Transfer of requirements / Begin assembly order from SD
    Availability check for sales
    Product allocation active
    Then when we are assigning this newly defined Schedule line Category to Item category, make sure to leave the field of MRP Type as blank in VOV5.
    Regards,
    Sarthak

  • Ordered item is not showing in MD04

    Hello SAP Gurus,
    My requirement is like one material is in the sales order but dose not show as ordered in MD04.
    Could someone please help me on this.
    Thanks
    Sha

    Go to your sales order and note the schedule line category of the line item which you want to check
    In t code VOV6 for the schedule line category there is a check box for transfer of requirements near to Availabilty check tick box, If you tick that then this order for this line item will appear in MD04

Maybe you are looking for