Purchase order history not displayed in correct sequence

Hi all,
We are on SRM 7.1 ECS.
The issue we are facing is that the follow on documents for the PO i.e.
confirmatin and Invoice are not displayed in the correct sequence i.e. the sequence in which the documents are displayed is :
Invoice>confirmation>shopping cart-->PO
Any idea if this is a std feature or a bug?

Hi
Pl find the content of the notes.
Note 1524928 - History: Order of related document is not consistent.
Symptom
In some cases, when you go to the shopping cart item history, the system displays follow-on documents in a wrong order.
Other terms
History.
Reason and Prerequisites
Program Error.
Solution
Implement the attached correction instructions or apply the relevant Support Package.
If  the note is not released , pl raise a OSS to get this note released.
Regards
velu

Similar Messages

  • Purchase Order History not updated properly

    Hi All,
    The Purchase Order History is not updated correct.
    Scenario:
    The  Invoice is created ( MIRO) with Amount : 1001 USD but in PO History it displays 1000 USD.
    The Tolerance is 1 USD ...My Requirement is that it should display 1001 in PO History.
    Thanks and Regards
    Mahesh

    The Actual Bill Value is 1001 USD.

  • Purchase Order History not appearing

    Hi,
    In case of Import PO I am not able to see the PO history ,its coming blank.
    This is very strange problem I am facing.
    Please guide me on above.
    Regards,
    Gitesh

    Purchase Order History will appear only if you do GRN or Invocie against PO
    In otherwards, if further document is created then only it will display the Purchase Order History tab

  • Purchase Order history not updating in my STO

    Dear Experts,
    We are doing stock transfer order internally for FERT and *BOUGHT OUT * items. Now at the time of delivery through VL10B all bought out items are appear in outbouddelivery but FERT item material is not coming automatically in delivery.  System pickes up item category as NLN but if i manually added FERT material at the end system picks up item category as ULN & purchase order history also not updated in STO.
    Also in MD04 system is showing reservation against STO number & the result is i am not able to do delivery because system is showing message as only 0 qty is available for picking
    Can any body helps me in this?
    Thanks
    Trupti

    Hi,
      Define your item category setting for your Delivery..
    Under SPRO>Loge-Exce>Shipping-->Define item category determination in Deliveries.
    Note: You should not enter the line item manually in delivery, thus it will store the item category as DLN  (DLN is for without order Reference) so it wont record any history.
    Regards
    GK..
    Edited by: Gnana Kumar on Oct 26, 2010 1:04 PM

  • Purchase Order History not appearing for Purchase Order with service items

    A purchase order with a service item has been created.  A SES has been created and Miro transactions as well. When tcode ME2L is executed, the Purchase Order History field is blank. Any configuration missing or is there an applicable OSS note to fix  this?

    Hi,
    It is a coding error.
    Could you please check if you have applied the note 1049031 with the latest version 13?
    Regards,
    Edit

  • Purchase order history not getting updated for Delivery Costs invoice

    Hi
    Please let me know the reason why delivery costs invoice entry details are not updated in Purchase order history. As it is observed in another client.
    Thanks and advance.
    Regards
    Mohan

    Hi
    Following Stpes are executiong...
    1. PO
    2. MIRO for Custom duties
    3. MIGO (PO History getting updated after GR for both delivery costs and GR 101)
    Thanks in Advance.
    Regards
    Mohan

  • Purchase order is not displayed in the t.code ME23N

    Hi All,
    While seeing t.code -ME23N purchase order display got the error message 'Address doesn't exist 587354
    Message no. AM010
    I have checked table level -adrc the number 587354 is dsiplayed.
    If anybody know the reason please revert the same.
    Thanks
    chinna

    Hi,
    Please refer below SAP note
    498153  FAQ: Addresses in the purchasing
    1. Question:
    When trying to display an address in the purchasing document, the system
    displays message AM010 " Address doesn't exist & & & &", why?What can
    you do?
    Answer:
    The causes of the error are described and corrected in Notes 91001,
    154208, 165106, 170461, 306078, 332470, 418670. Check these notes in
    your system.The documents can be corrected with report ZCORADDR from
    Note 91001. If the defective situation can be reproduced, even though
    your system contains all the corrections, open a message under component
    MM_PUR-GF-ADR with a reproducible example
    regards,
    Lalita

  • Purchase order history not updated when invoice is posted for framework POs

    Hi,
    We've created a framework PO and now posted an invoice against it. The invoice was posted in the following way:
    1. Go to transaction MIRO
    2. Enter the PO number in the PO reference field.
    3. Select the "G/L Account" tab and enter the value manually and also enter the amount at the header level and then post it.
    But when I go back to the PO, I don't see the PO history tab and hence, the PO history is not visible.
    Does anybody have an idea on any config that may be missing?
    Any clues will be appreciated.
    Regards,
    Lakshmi

    Hi
    Did you refer to the same Framework purchase order while posting the invoice?
    Invoice has been posted succesfully and number generated? If yes then check in MIR5/MIR6 the purchase order reference for that Invoice.
    If everything is correct then you can see the IV number in PO history tab.
    Thanks

  • Number of Purchase Order is not displayed anymore in Sourcing cockpit

    Hi,
    It was possible to get back the PO-Number created in ERP when processing requirements within the sourcing cockpit.
    I don't know what caused the problem that the PO-Number doesn't appear anymore. But this is essential: how to get the created PO-Number after processing a requirement to PO in SourcingCockpit?
    ThanX for your help in advance
    Isam

    Hi,
    Please refer below SAP note
    498153  FAQ: Addresses in the purchasing
    1. Question:
    When trying to display an address in the purchasing document, the system
    displays message AM010 " Address doesn't exist & & & &", why?What can
    you do?
    Answer:
    The causes of the error are described and corrected in Notes 91001,
    154208, 165106, 170461, 306078, 332470, 418670. Check these notes in
    your system.The documents can be corrected with report ZCORADDR from
    Note 91001. If the defective situation can be reproduced, even though
    your system contains all the corrections, open a message under component
    MM_PUR-GF-ADR with a reproducible example
    regards,
    Lalita

  • ME80FN evaluation regarding Purchase Order History (Execute in BackGround)

    Hi,
    I need your help regarding the follwowing Situation: I want to make an avaluation regarding the Purchase Order History for a few thousend of purchase orders in ME80FN. Becasue of the big amount of purchase orders I have to execute the program in Background. After executing the program in background in the created spool I get the Information regarding the Header of the purchase orders NOT REGARDING THE PURCHASE OREDR HISTORY.
    Is there any way to start a background programm with some kind of a parameter so it can deliver the Purchase Order History information i need. Another way to solve the problem would be to set up a default value for the ME80FN transaction so the default delivered Information would be regarded to the Purchase Order History not to the Header Information?
    Regards & Thanks for your help
    Bogdan

    I know this does not anser yoru question but, The last time I ran it I could comfortably do it for a long time .. Foreground.. WOuld you have issues running it in teh foreground.. May be BASIS could help tuning the run time

  • Mass display or print Purchase Order History

    Instead of checking your Purchase Order History one at a time, you can now mass display or print them with this customized abap report.
    Mass display or print Purchase Order History
    You can request report by :
    1.  Change date
    2.  User Name
    3.  Purchase Order Number
    4.  Vendor Code
    Written by : SAP Basis, ABAP Programming and Other IMG Stuff
                 http://www.sap-img.com
    REPORT ZPOCHANGE LINE-SIZE 132 NO STANDARD PAGE HEADING
                     LINE-COUNT 065(001)
                     MESSAGE-ID VR.
    TABLES: DD04T,
            CDHDR,
            CDPOS,
            DD03L,
            DD41V,
            T685T,
            VBPA,
            TPART,
            KONVC,
            EKKO.
    SELECT-OPTIONS: XUDATE FOR CDHDR-UDATE,
                    XNAME  FOR CDHDR-USERNAME,
                    XEBELN FOR EKKO-EBELN,
                    XLIFNR FOR EKKO-LIFNR.
    SELECTION-SCREEN SKIP.
    TEXT-001 - Sorting Sequence
    SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
    PARAMETERS: SUDATE RADIOBUTTON GROUP R1,
                SNAME  RADIOBUTTON GROUP R1,
                SOBID  RADIOBUTTON GROUP R1.
    SELECTION-SCREEN END OF BLOCK BLK1.
    DATA: WFLAG,
          WCHANGENR LIKE CDHDR-CHANGENR.
    DATA: INDTEXT(60) TYPE C.
    DATA: BEGIN OF ICDHDR OCCURS 50.
            INCLUDE STRUCTURE CDHDR.
    DATA: END OF ICDHDR.
    DATA: BEGIN OF ICDSHW OCCURS 50.
            INCLUDE STRUCTURE CDSHW.
    DATA: END OF ICDSHW.
    DATA: BEGIN OF EKKEY,
            EBELN LIKE EKET-EBELN,
            EBELP LIKE EKET-EBELP,
            ETENR LIKE EKET-ETENR,
          END OF EKKEY.
    DATA: BEGIN OF ITAB OCCURS 50,
            BEGIN OF EKKEY,
              EBELN LIKE EKET-EBELN,
              EBELP LIKE EKET-EBELP,
              ETENR LIKE EKET-ETENR,
            END OF EKKEY,
            CHANGENR LIKE CDHDR-CHANGENR,
            UDATE    LIKE CDHDR-UDATE,
            UTIME    LIKE CDHDR-UTIME,
            USERNAME LIKE CDHDR-USERNAME,
            CHNGIND  LIKE CDSHW-CHNGIND,
            FTEXT    LIKE CDSHW-FTEXT,
            OUTLEN   LIKE CDSHW-OUTLEN,
            F_OLD    LIKE CDSHW-F_OLD,
            F_NEW    LIKE CDSHW-F_NEW,
          END OF ITAB.
    DATA: OLD_OBJECTID LIKE CDHDR-OBJECTID.
    FIELD-SYMBOLS: <F_OLD>, <F_NEW>.
    SELECT * FROM EKKO WHERE EBELN IN XEBELN AND
                             LIFNR IN XLIFNR.
      CLEAR CDHDR.
      CLEAR CDPOS.
      CDHDR-OBJECTCLAS = 'EINKBELEG'.
      CDHDR-OBJECTID   = EKKO-EBELN.
      PERFORM GETCHGDOCS.
    ENDSELECT.
    IF SUDATE = 'X'.
      SORT ITAB BY UDATE EKKEY-EBELN CHANGENR EKKEY-EBELP
                   EKKEY-ETENR.
    ELSEIF SNAME = 'X'.
      SORT ITAB BY USERNAME EKKEY-EBELN CHANGENR EKKEY-EBELP
                   EKKEY-ETENR.
    ELSE.
      SORT ITAB BY EKKEY-EBELN CHANGENR EKKEY-EBELP EKKEY-ETENR.
    ENDIF.
    LOOP AT ITAB.
      CLEAR: INDTEXT, EKKEY.
      CASE ITAB-CHNGIND.
        WHEN 'U'.
            INDTEXT(50) = ITAB-FTEXT.
            INDTEXT+51  = TEXT-020.
            CONDENSE INDTEXT.
        WHEN 'D'.
            INDTEXT = TEXT-021.
        WHEN 'E'.
            INDTEXT(5) = ITAB-FTEXT.
            INDTEXT+51 = TEXT-021.
            CONDENSE INDTEXT.
          WHEN 'I'.
            INDTEXT = TEXT-022.
        ENDCASE.
        RESERVE 4 LINES.
        IF WCHANGENR NE ITAB-CHANGENR.
          WCHANGENR = ITAB-CHANGENR.
          EKKEY = ITAB-EKKEY.
          WRITE:/ ITAB-UDATE UNDER 'Change Date',
                  ITAB-UTIME UNDER 'Time',
                  ITAB-USERNAME UNDER 'User Name',
                  ITAB-EKKEY-EBELN UNDER 'PO No',
                  ITAB-EKKEY-EBELP UNDER 'Item',
                  ITAB-EKKEY-ETENR UNDER 'Sch No',
                  INDTEXT     UNDER 'Changes'.
        ELSEIF ITAB-EKKEY NE EKKEY.
          WRITE:/ ITAB-EKKEY-EBELP UNDER 'Item',
                  ITAB-EKKEY-ETENR UNDER 'Sch No',
                  INDTEXT     UNDER 'Changes'.
        ENDIF.
        CASE ITAB-CHNGIND.
          WHEN 'U'.
            ASSIGN ITAB-F_OLD(ITAB-OUTLEN) TO <F_OLD>.
            ASSIGN ITAB-F_NEW(ITAB-OUTLEN) TO <F_NEW>.
            WRITE: / TEXT-023  UNDER 'Changes',
                     <F_OLD>.
            WRITE: / TEXT-024 UNDER 'Changes',
                     <F_NEW>.
          WHEN 'E'.
            ASSIGN ITAB-F_OLD(ITAB-OUTLEN) TO <F_OLD>.
            WRITE: TEXT-023 UNDER 'Changes',
                   <F_OLD>.
        ENDCASE.
        SKIP.
    ENDLOOP.
    TOP-OF-PAGE.
    WRITE:/ SY-DATUM,SY-UZEIT,
           50 'P U R C H A S E  O R D E R   H I S T O R Y',
          120 'Page', SY-PAGNO.
    WRITE: / SY-REPID,
             60 'Purchase Orders Changes'.
    SKIP.
    ULINE.
    IF SUDATE = 'X'.
      WRITE:/001 'Change Date',
             014 'Time',
             024 'User Name',
             038 'PO No',
             050 'Item',
             057 'Sch No',
             065 'Changes'.
    ELSEIF SOBID = 'X'.
      WRITE:/001 'PO No',
             013 'Item',
             020 'Sch No',
             028 'Change Date',
             041 'Time',
             051 'User Name',
             065 'Changes'.
    ELSE.
      WRITE:/001 'User Name',
             015 'Change Date',
             028 'Time',
             038 'PO No',
             050 'Item',
             057 'Sch No',
             065 'Changes'.
    ENDIF.
    ULINE.
    FORM GETCHGDOCS.
      CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
           EXPORTING
                DATE_OF_CHANGE    = CDHDR-UDATE
                OBJECTCLASS       = CDHDR-OBJECTCLAS
                OBJECTID          = CDHDR-OBJECTID
                TIME_OF_CHANGE    = CDHDR-UTIME
                USERNAME          = CDHDR-USERNAME
           TABLES
                I_CDHDR           = ICDHDR
           EXCEPTIONS
                NO_POSITION_FOUND = 1
                OTHERS            = 2.
      CHECK SY-SUBRC EQ 0.
      DELETE ICDHDR WHERE CHANGE_IND EQ 'I'.
      CHECK NOT ICDHDR[] IS INITIAL.
      LOOP AT ICDHDR.
        CHECK ICDHDR-UDATE IN XUDATE.
        CHECK ICDHDR-USERNAME IN XNAME.
        CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
                     EXPORTING  CHANGENUMBER       = ICDHDR-CHANGENR
                     IMPORTING  HEADER             = CDHDR
                     TABLES     EDITPOS            = ICDSHW
                     EXCEPTIONS NO_POSITION_FOUND  = 1
                                OTHERS             = 2.
        CHECK SY-SUBRC EQ 0.
        LOOP AT ICDSHW.
          CHECK ICDSHW-TEXT_CASE EQ SPACE.
          MOVE-CORRESPONDING ICDSHW TO ITAB.
          MOVE-CORRESPONDING ICDHDR TO ITAB.
          MOVE ICDSHW-TABKEY+3 TO ITAB-EKKEY.
          APPEND ITAB.
        ENDLOOP.
      ENDLOOP.
    ENDFORM.
    END OF PROGRAM

    Hi,
    copied from          http://www.sap-img.com/mm001.htm

  • Purchase Order History Reference not filled

    Hello everyone,
    we are using BAPI_INCOMINGINVOICE_CREATE to create an invoice for an purchase order. It works just fine except that there no Reference filled in the Purchase Order History. We fill the number of the reference to the BAPI (headerdata-ref_doc_no) and the reference is visible on the created FI document as expected.
    However the customer insists, that it has to be visible in the field Reference of the Purchase Order History as well. I know, it is the XBLNR field of the table BSEG. I dug deep in the source codes to find out, where is the problem, but setting of this field seems to be very complicated. Someone told me, that the field is only filled when the GR-Based Invoice Verification is checked (which in our case is not).
    Can someone tell me the rules, when the field Reference gets filled? Or (if there is anything) how to customize the system, co make this field filled?

    Hi Oleg,
    thank you for your reaction.
    I am aware of that there is a field XBLNR in the BKPF table - and there we have the reference filled correctly (it is visible on the FI document as I mentoined). However in the BSEG table is the XBLNR as well and it is related to displaying Reference in the Purchase Order History (the bseg relates to an PO item) at least in our case. When I manually input in the BSEG-XBLNR a value (via SE16N for example), it displays afterwards in the required field when viewing the Purchase order.
    In the case GR-Based Invoice Verification procedure and the table MKPF - i believe, you are right there (so the Reference is filled), however this is unfortunatelly not our case.
    What I am trying to find out are the conditions, under which the XBLNR in BSEG is filled (I can tell you, what source codes I have been inspecting, but I got lost after I while, because there are literally thousands of lines of code:-(

  • Purchase order no not getting displayed in FBL3N for doucment type RE

    Dear all,
    We have done a settings in FBL3N t.code. We have added BSEG-EBELN in the special fields and saved the layout. The purpose is to make the purchase order number to display when we are executing line item display for GR/IR clearing and Cenvat clearing gl account. Purchase order number is correctly getting displayed in Gr/ir clearing account. But in cenvat clearing gl account the transactions that are related to doucment type SA(that is J1IEX transaction), the purchase order number is getting displayed, but in the transactions that are related to document type RE(MIRO transactions), the purcahse order number is not getting displayed.
    We have checked the BSEG table for the gl account. The purchase order number is not getting updated for the MIRO transactions in the cenvat clearing gl account.
    Please suggest us so that the above issue can be solved.
    Thanks & Regards,
    Anand

    Hi,
    Could you please add field BSEG-EBELN as a special field in FBL3N (from menu path Settings -> Special fields). Then, select the Purchase order field again from "Change Layout" (Ctrl+F8). Now this field is available for display variants, it has the technical name 1-U_EBELN and the description 'Purchase Document'. The other field has the same description but as technical name
    '1-EBELN'. When you create a display variant be aware that you select 1-U_EBELN and not 1-EBELN.
    Please also refer to note 215798.
    Regards
    Ravinagh Boni

  • I recently upgraded my motherboard on my MacBook Pro and I need to re-download the Adobe CC software I purchased. My Purchase Order History claims I didn't have a history. There are not options to redownload either. I am logged on right now. Please advise

    I recently upgraded my motherboard on my MacBook Pro and I need to re-download the Adobe CC software I purchased. My Purchase Order History claims I didn't have a history. There are not options to redownload either. I am logged on right now. Please advise.

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Purchase Order History SES not shown when not accepted

    We are working on 2 systems : one is ECC 6.0 and the other is 4.6.
    When i create a SES via ML81N and the SES is not released yet : on the 4.6 version, the SES is shown in the purchase order history, while in the ECC 6.0 version, the SES is not shown in the purchase order history. In ECC 6.0, the SES is shown inthe purchase order history tab after the SES has been accepted.
    Is this a setting in customizing or a difference in the 2 versions of SAP?

    Hi,
    no, it might be a coding error or an inconsistency issue.
    Please check the note
    442091 - Service entry sheet missing in purchase order hist
    In order to repair already existing inconsistencies, you can use report    
    RMESSRK2 (from Note 141870 or as of Release 4.6C in development class       
    ML_TOOLS). However, the report must be modified in the two positions        
    specified in the attachment.                                                                               
    If you can not find the report RMESSRK2 in transaction SE38                 
    in your system - or in transaction SE80 under the development class         
    ML_TOOLS, then please copy the program from the attached note               
    ML_TOOLS into your system and correct the coding according to               
    note 442091.       
    Regards,
    Edit

Maybe you are looking for