Event tags not recognized in 11

I upgraded from 7 to 11. 11 recognized my people tags, but not my event tags. I have 9484 pictures without any event tags. What do I do now?
Thanks

Events are new in PSE11. Were you previously using keywords for your events?
If so check imported keywords.

Similar Messages

Flash builder Event metadata not recognized

Hello,
Can someone explain me why my event isn't recognized in the code below (it is not proposed as a property for my TestButton and if I try to force it I get an error)
Test application :
<?xml version="1.0" encoding="utf-8"?><s:Application
xmlns:fx=http://ns.adobe.com/mxml/2009
xmlns:s="
library://ns.adobe.com/flex/spark"
xmlns:mx="
library://ns.adobe.com/flex/halo"
xmlns:local="
minWidth="
1024" minHeight="768">
    <local:TestButton/>
</s:Application>
TestButton.mxml :
<?xml version="1.0" encoding="utf-8"?>
<s:Button
xmlns:fx=
http://ns.adobe.com/mxml/2009 xmlns:s="
library://ns.adobe.com/flex/spark"xmlns:mx="
library://ns.adobe.com/flex/halo">
     <fx:Metadata>
Event("testEvent", type="flash.events.Event")]
     </fx:Metadata> </s:Button>
There is no more or less code than that. I'm using the beta of Flash Builder 4.
Thanks. </s:Button>
There is no more or less code than that. I'm using the beta of Flash Builder 4.
Thanks.
</s:Button>
There is no more or less code than that. I'm using the beta of Flash Builder 4.
Thanks.

My apologize for my post layout but I definitly can't get my post to look like what I write in the text field. I don't know why it has repeated the last line (maybe because it's some Adobe stuff). It's difficult to be confident in the reliability of Adobe developping tools when a simple web page doesn't work correctly.
Sorry for being nasty but I'm starting to get rid of spending hours on ununderstandable problems.
(To be more nasty, the best this morning : I start a new Flex project in Flash Builder, make a few things, and when I tried to launch it, surprise : "This file cannot be launched" and that's all, no more explanation, imposible to find answer on the web. I finally had to restart the project.)

MetaX rating tags not recognized by appleTV

i used metaX to add meta data some movies... all the info (actors, directors, chapter names etc) and the rating show up in iTunes and in FrontRow. but only some of the info appears on appleTV.
parental controls which are based on ratings don't seem be recognized by the appleTV... i set the parental controls to ask for a password for anything over a G rating, but R rated movies were not recognized and no password was asked for.. the movie just played. i have one iTunes purchased movie that is an 18A that gets screened properly and a password is asked for when it it clicked on.
has anyone had any luck with getting parental controls to work properly with rating added with metaX.

looks like the ratings tag is made up of different elements as you suggest...
in frontRow the metaX tagged ratings display beside the title name when you scroll over a movie and wait... along with all the other stuff... artwork, title, actors, producer etc... and in iTunes
but for iTunes music store purchased movies, iTunes 8.0 displays the rating beside the name in the movies list but frontRow does NOT display the rating as it did for the metaX tagged movie
so there is more than one element that make the rating appear...
summary of tags that show up...
iTunes: Artwork, Title, Rating, Description, Actors, --Director, Producers--, Genre, Release, Length(not a tag), Chapter Names
FrontRow Artwork, Title, Rating( *doesn't show up for iTunes store purchases?* ), Description, Actors, Director, Producers, Genre, Release, Length(not a tag), Chapter Names
appleTV
metaX taged --> Artwork, Title, --Rating--, Description, --Actors, Director, Producers--, Genre, --Release--, Length(not a tag), Chapter Names, --Chapter Pictures-- (haven't tested)
iTunes Store purchased --> Artwork, Title, --Rating--, Description, Actors, Director, Producers, Genre, Release, Length(not a tag), Chapter Names, Chapter Pictures

T:tabChangeListener tag not recognized error when using in facelets

I am trying to use tomahawk's TabChangeListener with PanelTabbedPane, but when I add the tabChangeListener tag in the body of the <t:panelTabbedPane /> , I get an error: "<t:tabChangeListener> Tag Library supports namespace: http://myfaces.apache.org/tomahawk, but no tag was defined for name: tabChangeListener". I have used many other tomahawk components with no problem. Do I have to configure my tomahawk taglib to include that tag? I am using tomahawk in facelets.
Here is facelets source:
<ui:composition xmlns="http://www.w3.org/1999/xhtml" xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:h="http://java.sun.com/jsf/html" xmlns:f="http://java.sun.com/jsf/core" xmlns:c="http://java.sun.com/jstl/core"
    xmlns:t="http://myfaces.apache.org/tomahawk" xmlns:fn="http://java.sun.com/jsp/jstl/functions" xmlns:fr="http://myproject.com/test/jsf">
<t:panelTabbedPane selectedIndex="#{coverageDisplay.startIndex}" serverSideTabSwitch="#{true}">
          <t:panelTab label="#{lbls.vehCovDetailsTab1}" rendered="#{vehiclesBean.vehicles.rowCount > 0}" >
              <fr:vehCovSummTab />
          </t:panelTab>
          <t:panelTab label="#{lbls.vehCovDetailsTab2}" rendered="#{vehiclesBean.vehicles.rowCount > 3}" >
              <fr:vehCovSummTab />
          </t:panelTab>
          <t:panelTab label="#{lbls.vehCovDetailsTab3}" rendered="#{vehiclesBean.vehicles.rowCount > 6}" >
              <fr:vehCovSummTab />
          </t:panelTab>
          <t:tabChangeListener type="myproject.MyTabChangeListener" />
</t:panelTabbedPane>My tomahawk.taglib.xml:
    <tag>
        <tag-name>panelTabbedPane</tag-name>
        <component>
            <component-type>org.apache.myfaces.HtmlPanelTabbedPane</component-type>
            <renderer-type>org.apache.myfaces.TabbedPane</renderer-type>
        </component>
    </tag>My tomahawk.tld:
        
    <tag>
        <name>panelTabbedPane</name>
        <tag-class>org.apache.myfaces.custom.tabbedpane.HtmlPanelTabbedPaneTag</tag-class>
        <body-content>JSP</body-content>
                
        
        <attribute>
            <name>id</name>
            <required>false</required>
            <rtexprvalue>false</rtexprvalue>
            <type>java.lang.String</type>
            <description>Every component may have an unique id. Automatically created if omitted.</description>
        </attribute>
        <attribute>
            <name>rendered</name>
            <required>false</required>
            <rtexprvalue>false</rtexprvalue>
            <type>java.lang.String</type>
            <description>If false, this component will not be rendered.</description>
        </attribute>
        <attribute>
            <name>binding</name>
            <required>false</required>
            <rtexprvalue>false</rtexprvalue>
            <type>java.lang.String</type>
            <description>Component binding.</description>
        </attribute>
        
        <attribute><name>dir</name>     <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>lang</name>    <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>style</name>   <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>title</name>   <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute>
            <name>styleClass</name>
            <required>false</required>
            <rtexprvalue>false</rtexprvalue>
            <description>Corresponds to the HTML class attribute.</description>
        </attribute>
        
        <attribute><name>onclick</name>    <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>ondblclick</name> <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>onmousedown</name><required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>onmouseup</name> <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>onmouseover</name><required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>onmousemove</name><required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>onmouseout</name> <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>onkeypress</name> <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>onkeydown</name> <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>onkeyup</name>    <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        
        <attribute><name>align</name>           <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>border</name>          <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>bgcolor</name>         <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>cellpadding</name>     <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>cellspacing</name>     <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>datafld</name>         <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>datasrc</name>         <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>dataformatas</name>    <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>frame</name>           <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>rules</name>           <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>summary</name>         <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        <attribute><name>width</name>           <required>false</required> <rtexprvalue>false</rtexprvalue></attribute>
        
        <attribute>
            <name>enabledOnUserRole</name>
            <required>false</required>
            <rtexprvalue>false</rtexprvalue>
            <description>
                If user is in given role, this component will be rendered
                normally. If not, no hyperlink is rendered but all nested
                tags (=body) are rendered.
            </description>
        </attribute>
        <attribute>
            <name>visibleOnUserRole</name>
            <required>false</required>
            <rtexprvalue>false</rtexprvalue>
            <description>
                If user is in given role, this component will be rendered
                normally. If not, nothing is rendered and the body of this tag
                will be skipped.
            </description>
        </attribute>
        <attribute>
            <name>selectedIndex</name>
            <required>false</required>
            <rtexprvalue>false</rtexprvalue>
            <description>
                Index of tab that is selected by default.
            </description>
        </attribute>
        <attribute>
            <name>activeTabStyleClass</name>
            <required>false</required>
            <rtexprvalue>false</rtexprvalue>
            <description>
                Style class of the active tab cell.
            </description>
        </attribute>
        <attribute>
            <name>inactiveTabStyleClass</name>
            <required>false</required>
            <rtexprvalue>false</rtexprvalue>
            <description>
                Style class of the inactive tab cells.
            </description>
        </attribute>
        <attribute>
            <name>disabledTabStyleClass</name>
            <required>false</required>
            <rtexprvalue>false</rtexprvalue>
            <description>
                Style class of the disabled tab cells.
            </description>
        </attribute>
        <attribute>
            <name>activeSubStyleClass</name>
            <required>false</required>
            <rtexprvalue>false</rtexprvalue>
            <description>
                Style class of the active tab sub cell.
            </description>
        </attribute>
        <attribute>
            <name>inactiveSubStyleClass</name>
            <required>false</required>
            <rtexprvalue>false</rtexprvalue>
            <description>
                Style class of the inactive tab sub cells.
            </description>
        </attribute>
        <attribute>
            <name>tabContentStyleClass</name>
            <required>false</required>
            <rtexprvalue>false</rtexprvalue>
            <description>
                Style class of the active tab content cell.
            </description>
        </attribute>
    </tag>
    
    <tag>
        <name>tabChangeListener</name>
        <tag-class>org.apache.myfaces.custom.tabbedpane.TabChangeListenerTag</tag-class>
        <body-content>empty</body-content>
        <attribute>
            <name>type</name>
            <required>true</required>
            <rtexprvalue>false</rtexprvalue>
        </attribute>
    </tag>Message was edited by:
citress
Message was edited by:
citress

I have the same question. Does someone have a solution for this?

Lots of lags in basic finder operations - mouse events are not recognized

Hi there,
since 10.6.7 I'm experiencing lots of problems with my Mac mini 2,4Ghz Intel core duo / 4 GB RAM / 140GB free disc space. I recently updated to Lion which I hoped would fix some of this problems - turned out to be a dream. Some Time/Apps later all the problems show up again. I already searched the web for solutions and did the following:
resetting PRAM, booting in safe mode, deleting startup items, complete new system installation, and apps, updating software, killing dashbord (read it somewhere), adjusting mouse preferences, checking with hardware test, removing RAM bars to check if there is a problem, memtest, used "lion cache cleaner" for optimizing RAM, deleting caches, switching vom 64 to 32 bit and vice versa, etc. ... no effect!
Activity monitor does not show any unusual peaks (as far as I can tell) in performance (cpu, ram, etc.)
1) Basic finder operations often lag. E.g. opening an external USB drive, opening internal drive, opening upper registers(menues), etc. Sometimes up to 5 seconds delay, which can be really annoying during work. What is more, this happens in almost all Apps when I try to access the file system.
2) iTunes videos from the store lag quite heavy. It's almost impossible to watch a movie due to the hangups
3) Mouse clicks/moves sometimes/often are not (or very late) recognized by finder/apps. (e.g. CS5 Photoshop,when triing to move a layer I often need to use the arrow keys of the keyboard to have an effect, mouse is just ignored & simple movement of files will only happen after I tried it 2-3 times)
4) Entering text in form fields, like logins, community posts, ... is a real pain since it often takes some time until the text shows up. It's like typing and 5 seconds later you can see the machine work by putting letter after letter on the screen.
Does anyone have an idea what the problem is?
Could it be a hardware issue? Grafic-card?
Any solutions?
Would be nice hearing from you.
Pero

Found something... read, that it could be a mouse-usb problem when connected to the keyboard... so what I did was connecting the mouse directly to the mac... and ahhh first improvement... mouse-experienceis much better now... and I think, for what I can tell at this moment, finder operations seem better too.
Never would have guessed that. I take my mini to the office every day where I have a second set of mouse and keyboard... had the same probs there... so probably it is a mac-usb-keyboard with attached mouse - problem.

Movie Clips in Event Library not Recognized By Project Library

I downloaded Photos but when working on a project in iMovie 9 my iPhoto videos were not found. However if I revert to using iPhoto I regain my ability to move selected photos into my iMovie project so for now I will simply not use Photos. However I still have a problem. The movie clips in the projects in my Project Library don't find the clips in the Event Library in the iPhoto Videos folder. I see either: "This clip's media file is not currently available" or "Source clip is missing." Is there some way to refresh iMovie? Fortunately the projects shared to iTunes are still intact.

Many who post here use Preference Manager from DIgital Rebellion to trash preferences. It's reliable and the price is right – free.
I assume you've tried different events on different drives and the no-playback problem persists.
And just out of curiosity, can you play clips in a project timeline or if you open the clip in its own time line? And does the skimmer skim?
Russ

Fiber "Deploy Data Model to LCDS" fails: model tag not recognized

I get an XML parse error when trying to deploy my data model in Flash Builder 4 Beta 2 with the Modeler Plugin installed. It says it cannot recognize model, which is the base tag. I know there has been some issues with this in Eclipse also, but it's particularly troubling because I use this process to figure out which pieces of the FML are causing Fiber to not start on my server.

Hi Gregory,
Can you please check for the logs? Please share the logs with us.
Regards,
Kishan

Tags not recognized when compiling the jsp pages through appc

Hi:
I am trying to convert a web application from weblogic 9.1 to weblogic 10.3. However, when I try to build the ear file the page compilation fails with the error:
weblogic.utils.compiler.ToolFailureException: jspc failed with errors :weblogic.servlet.jsp.CompilationException: projectFinancials.jsp:10:2: The tag handler class was not found "jsp_servlet._tags.__projectJobCostingLayout_tag
However, the tag file is there.
The tags are referenced through this declaration:
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<taglib>
<taglib-uri>http://name/app/tagfiles</taglib-uri>
<taglib-location>/WEB-INF/tags</taglib-location>
</taglib>
</web-app>
All the declarations in the jsp pages are fine. In weblogic 9.1 I don't have any problem. I also set the <backward-compatible>true</backward-compatible> in weblogic.xml.
Any idea?
Thanks!

There is no need to use tld files with tag files when it comes to running the ear file through appc. When I do development I use a tld file that contains references to all the tag files, however my build process replaces that with the tag files directory:
So, during development I have:
web.xml:
<taglib>
<taglib-uri>http://name/cps/tagfiles</taglib-uri>
<taglib-location>/WEB-INF/tld/mytags.tld</taglib-location>
</taglib>
mytags.tld:
<taglib xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/web-jsptaglibrary_2_0.xsd"
version="2.0">
<tlib-version>1.0</tlib-version>
<short-name>mytags</short-name>
<uri>mytaglib</uri>
<tag-file>
<name>agreementDetailsLayout</name>
<path>/WEB-INF/tags/agreementDetailsLayout.tag</path>
</tag-file>
During the build I have:
web.xml:
<taglib>
<taglib-uri>http://name/app/tagfiles</taglib-uri>
<taglib-location>/WEB-INF/tags</taglib-location>
</taglib>
If I don't do this appc will have a fit of even bigger proportions (more error messages etc.)

Google calendar event color tags not showing up in IPhone iCal - any fixes?

I have an iPhone 4 (iOS 5.1.1) and am trying to sync my google calendar to the built in iCal app. The events sync both ways, but the color tags I assign to each event does not sync. It used to bother me that the only way to color code events in google calendar was to create multiple calendars, but it seems as though google calendar has added the ability to change the color for each event so I'm going back to google calendar. For example, my classes are in blue, exams are in pink, meetings are turquoise, etc.
I synced my google calendar to the iPhone iCal (via settings, turned on calendar tab listed under gmail account that I use for my google calendar), and all the events sync correctly (can add events on google calendar or iPhone and it syncs), but the colors do not sync. When I view my iPhone iCal all the events from my google calendar are the same color, even if they have different color tags when viewed online. Also, when I add an event on the iPhone iCal, the event syncs to the google calendar but there is no option to change the color tag for the event and it shows up as the default grey color when viewed online.
Is there a way to fix this? Or is this something that google and apple have not resolved?
I would prefer not to use a third party app, but I might consider it if there is no other fix. Thanks!

Hello lulu and welcome to the Palm forums.
I don't know of a way to make the color codes from iCal sync with the color codes on the Palm Z22. The Missing Sync for Palm OS has more features than Palm Desktop, but I also don't believe it will sync the category color codes.
Alan G
Post relates to: Treo 755p (Sprint)

My ID3 tags not being recognized by iTunes 10.2.2

Can't quite find my unique problem on this board so hopefully someone can help me.
I have imported a lot of MP3 files into iTunes, successfully, which have v2.4 ID3 tags on them. I screwed up the song titles on one (Grateful Dead) show, and all songs came in titled '04'...
I deleted the files in iTunes (and asked iTunes to remove the files as well), fixed up the ID3 tags in the originals, and reimported. But, titles are still '04'!?
Since my music library is on my Linux box and I am mounting and importing from there, I thought maybe something was getting cached so I copied the whole album directory over to my iMac, but still I get the same '04' title for every song.
I also changed the Album attribute in the ID3 tags, but that is still also coming out the old (wrong) way.
It is as if iTunes has some sort of 'fingerprint' of the songs and refuses to recognize the ID3 tags.
This is on OS X 10.6.7 on iTunes 10.2.2, so I'm up to date on all software. And, I've imported A TON of shows like this without issue, it otherwise works just fine.
Anyone ever see this weird problem before?

Sorry, should have been clearer.
The first time I applied the ID3 tags my script for parsing the artist, album and track names from the directory name hierarchy and filenames (e.g. ~/Music/<artist>/<album>/<track number>-<filename>), my script had a bug and all ID3 'title' values were set to the month number of the concert (04 = April).
So, the first time I imported into iTunes, all tracks were titled '04'. I deleted those in iTunes, fixed my script, but now despite apparently having correct ID3 tags, all songs continue to be named '04'. I also changed the album value to, changing from 'Hartford 04262010' to 'Hartford Apr 26, 2010', but again the original value appears to be "sticky", and despite the apparently revised ID3 tag, the album name also is the same as the first time I imported (i.e. Hartford 04262010).
Like I said, it appears that iTunes is somehow caching the original values and not recognizing the new / revised ID3 tags.

App.config tag oracle.dataaccess.client not recognized on windows 7...

Hi all,
I have an application that is working fine on windows XP. On windows 7, the same application cannot work cause of the tag oracle.dataaccess.client you can see below which is not recognized by the system. As soon as I start the application I get an error
message
Unrecognized configuration section oracle.dataaccess.client. Can someone help please before I get nuts.
<oracle.dataaccess.client>
<settings>
<add name=""EA_SERVICES"."SLI_SECURITY_PKG"."SEC_GROUPS_ADD".RefCursor.OUTPARAM" value="implicitRefCursor bindinfo='mode=Output'"/>
<add name=""EA_SERVICES"."SLI_SECURITY_PKG"."SEC_GROUP_MEMBERS_ADD".RefCursor.OUTPARAM" value="implicitRefCursor bindinfo='mode=Output'"/>
<add name=""EA_SERVICES"."SLI_SECURITY_PKG"."SEC_OBJECTS_ADD".RefCursor.OUTPARAM" value="implicitRefCursor bindinfo='mode=Output'"/>
<add name=""EA_SERVICES"."SLI_SECURITY_PKG"."SEC_RIGHTS_ADD".RefCursor.OUTPARAM" value="implicitRefCursor bindinfo='mode=Output'"/>
<add name=""EA_SERVICES"."SLI_SECURITY_PKG"."SEC_RIGHT_GROUPS_ADD".RefCursor.OUTPARAM" value="implicitRefCursor bindinfo='mode=Output'"/>
<add name=""EA_SERVICES"."SLI_SECURITY_PKG"."SEC_USERS_ADD".RefCursor.OUTPARAM" value="implicitRefCursor bindinfo='mode=Output'"/>
</settings>
</oracle.dataaccess.client>
Sherman Body love

Since this is an oracle section, I think you'll get more help over at the oracle forums.
https://community.oracle.com/community/developer/english/oracle_database/windows_and_.net/oracle_developer_tools_for_visual_studio
I would check the versions of the odp.net (oracle.dataaccess.dll) on both machines. The XP machine probably has the 11g client on it. And the windows 7 machine probably has the 12c client on it.

Event Viewer cannot open the event Log or Custom view. Verify that the Event log service is running or query is too long. The instance name passed was not recognized as valid by a WMI data provider(4201).

"Event Viewer cannot open the event Log or Custom view. Verify that the Event log service is running or query is too long. The instance name passed was not recognized as valid by a WMI data provider(4201)"
This error keeps cropping up now and again on most of our domain controllers (OS-2008 AND 2008R2)...Usually a restart fixes the issue however the issue repeats and security logs don't generate.
Any advice on how to fix this issue permanently would be greatly appreciated.

Please see this: https://social.technet.microsoft.com/Forums/windows/en-US/95987ca3-a1b2-4da6-95b7-d825d06cdac7/error-code-4201-the-instance-name-passed-was-not-recognized-as-valid-by-a-wmi-data-provider?forum=w7itprosecurity
You can also try rebuilding the WMI repository: http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Musicmatch Tags not correctly recognized by Itunes

I have all my CD's already in Musicmatch in wave format, when I copy the file into Itunes library, Tags are not recognized properly by Itunes. Artist, Album, track number... come in one string of Character and goes in first column of the library (name)
How can I convert Musicmatch Tags to get them recognized properly by Itunes?
What type od Tags Itunes is using?
Thanks in advance

it sounds like your problem is that the ID3 tags associated with your music in musicmatch aren't filled in all the way or something. I've googled around looking for some help for your situation and this program appears to be able to provide a fix for your situation. It can take all your songs, update/change the tags, and then after you do that you could theoretically import them into itunes and it would work. Hope it helps.
http://www.handyarchive.com/Audio/Music-Management/8664-Tag-amp-Rename.html
Message was edited: oops sorry, forgot the link

When I sync my iPod to my MacBook through iTunes new events do not show up and old events are not deleted. I am using Snow Leopard and not iSync.

I am using Snow Leopard on a MacBook. I have an iPod touch 3G. I do not use iSync it Mobile Me. When I sync my iPod through iTunes new events on my iPod do not show up on my Mac and old events do not delete. I have read help instructions that include deleting the data on the iPod. The iPod has the correct data and the Mac does not so I have not followed those instructions. I need help as the only reason I bought the Mac was to be able to sync, back up, view and print my calendar. Currently it is useless. If only Apple could have learned from the elegance of the Palm software.

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Iphone not recognized by windows or itunes

Can anyone please help me figure out how to resolve this issue? My iphone 4 is not recognized by my PC. My OS is by Vista Home Premium Service Pack 2. I tried the various "device not recognized" troubleshooting to no avail. I tunes is up to date. I even turned off my security sw for a bit to see if there was a third party conflict...all to no avail. There has got to be someone out there who has the smarts to show me how to fix this. Please advise and many thanks in advance!

Jason,
I understand why Apple doesn't cover the water damaged phones under the warranty, but do you know why they don't fix them if the customer is paying? Is it just because they want the people to buy another phone so they can make more money? I guess I just don't get it.
The cost to repair a device and all of its components is more than the cost of a new device.
Other than the article I linked above, this is the part of the warranty/legal forms that would apply:
+"US v1.0+
+Apple reserves the right to refuse+
+service on products that have serial numbers altered, defaced or removed or that are damaged due to+
+accident, abuse, neglect, misuse (including faulty installation, repair, or maintenance by anyone other+
+than Apple or an Apple Authorized Service Provider), unauthorized modification, extreme environment+
+(including extreme temperature or humidity), extreme physical or electrical stress or interference,+
+fluctuation or surges of electrical power, lightning, static electricity, fire, acts of God or other external+
+causes. In such event, Apple may return the product to you without servicing it, and may charge you the+
+Diagnostic Fee."+ from http://images.apple.com/legal/terms/repair/docs/070108aiphoneOOW.pdf
-Jason

Event tags not recognized in 11

Similar Messages

Maybe you are looking for