Events move_contol and size_control in class cl_gui_dialogbox_container
Hello,
Here's quite a tricky problem, which I could need some help for.
I have an object of class cl_gui_dialogbox_container with some HTML in it. The users can resize and move the control on the screen. Now position and size shall be kept in a dictionary table for each user.
I've registered the three events close, move_contol and size_control
CALL METHOD gc_dialogbox->set_registered_events
EXPORTING
events = gt_events
with event_ids 8, 11 and 12 and set the three handlers, e.g.
SET HANDLER cl_event_receiver_tree=>handle_close
FOR gc_dialogbox.
I created three corresponding methods handle_close, handle_move_control and handle_size_control.
Well, so far for what I've done. Now the results:
If I close the dialogue box, ABAP correctly jumps into method handle_close. But at that point, the control has already been closed! So I can't read size and position any more.
If I move or rezise the window, nothing at all happens... Not even the debugger would pop up if I do anything with the box.
Does anyone here know how to do this?
Thanks!
Jan
Edited by: Jan Krohn on Nov 22, 2008 3:17 PM
A quick update in case anyone else is looking for a solution:
I've still not found out how to handle the events move_control and size_control.
However, when handling close_control, it's possible to catch size and position:
call the methods to obtain size and/or position
call a cfw flush
only then the parameters will be filled with the correct values.
Important: This must happen after the close button has been pressed, but before the control will be destroyed. So put it in the correct place in your source code.
Similar Messages
-
Custom Events and Listeners between classes
I've got a project I've been working on for weeks that I'm
having yet another problem with. I'm trying to learn AS3 which is
why it's taking so long but that's not important for this post.
I wanted to create a custom event class so that I could make
sure the event does not interfere with other "COMPLETE" events that
are being passed between classes. In other words, I have a few
things that need to complete prior to a function being called...
one is some XML being loaded and another is a font loaded. So, I
thought I would create a custom FontLoaded class that extends Event
and make the type something like "FontLoadedEvent.LOADED". That way
I could listen for the XML "Event.COMPLETE" and this font event
also.
Please tell me if I'm going down the wrong path here but I
don't seem to be getting the dispatched event for my new custom
event. Also, how does one detect if it's being dispatched other
than if the eventListener is fired? Any other ways to test
this?You can trace the event to see if it dispatched.
Also, this is not a good case to create a new event. Custom
events are used to store additional information. MouseEvent exists
because Event doesn't have localX, localY, etc. properties. Since
you don't seem to be throwing additional properties, you can use a
regular event.
trace(dispatchEvent(new Event("panelFontsLoaded"));
addEventListener("panelFontsLoaded", onFontsLoaded);
Static consts are used to help debug typos. The event type is
just a string, often stored in a const. -
How to expose and code the event handlers of a base class?
I have created a class that inherits NumericUpDown. When I instantiate an object from that class, I can make it visible and have it appear on my form just like any other NUD. How can I get that instantiated object to expose the event handlers of its base
class, the NUD in this case, so that, for example, I can tell the client what action to take when the value of the instantiated object changes?
Thanks for your help.I am not sure exactly what you mean. Are you adding your NUD controls to the Form at design time from the toolbox or adding them in code at run time? If you are adding them to the form from the toolbox then you access the events the same way
you would a standart NUD control. If it is at runtime and you have a fixed amount of them you are going to add then you can declare them Class Scoped using the
WithEvents keyword which will let you access all their events.
Public Class Form1
Private WithEvents Nud1 As New NUD
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Me.Controls.Add(Nud1)
End Sub
Private Sub Nud1_ValueChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles Nud1.ValueChanged
Me.Text = Nud1.Value.ToString
End Sub
End Class
Public Class NUD
Inherits NumericUpDown
'Your custom code to make it work how you want...
End Class
If this is not what you are doing then you may need to explain a bit more and show the code you are using so we understand better.
If you say it can`t be done then i`ll try it -
Terminating event and abap oo class
Hi, gurus,
I 'd like to know how the terminating event works.
for example, i define a custom abap oo class (which has been implemented the interface of IF_WORKFLOW), and i want to use it as the terminating event of a standard task.
could you please tell me how does it works?
1. there must be an instance defined in the container of the task?
which must be instanciated in the run time?
2. then in another abap report, i simply raise the event defined as the terminating event, using the same key, then the pending task will be terminated?
could you pls provide more information on this ?
thanks and best regards.
JunHi Jun Zhang,
An event that is used to stop a workflow or task, or change the behavior of an already started workflow is called Terminating Event.
If the event linkage is active and the linkage rules are satisfied, the status of the work item is set to COMPLETED.
Defining Event Linkage Terminating event linkage consists of 2 parts.
Type linkage which specifies business object type, event name, generic name for event receiver (WORKITEM for terminating events of tasks or EVENTITEM for wait for event steps)
Instance linkage which identifies the particular receivers (I.e. work item Ids) per object instance.
Terminating event linkages can be seen in SWE3.
For terminating events, along with Business object and Event a Container Element should be specified that holds the Object Instance.
Terminating Event for Workflow is available from Release 6.10 only. This is defined in Basic Data of Workflow Builder.
Binding Definition is optional for Terminating Events. Binding can be defined b/n event container and workflow container to pass event information to the workflow if required. That is the only way of passing information from an asynchronous method to the task that started it.
Thanks and Regards,
Prabhakar Dharmala -
Which are the standard classes for events in ALV and explain each class pls
which are the standard classes for events in ALV and explain each class pls
POINTS WILL BE AWARDED,
REGARDS,
jagrut bharatkumar Shuklahi,
some links.
www.sapgenie.com
www.abap4u.com
http://help.sap.com/saphelp_nw2004s/helpdata/en/5e/88d440e14f8431e10000000a1550b0/frameset.htm
download the PDF from following link.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf
The ALV object Grid methods allow the same functionality as ALV grid report function modules but are displayed within
a screen (dialog program). SAP has provided a suit of programs which demonstrate how to For examples see standard SAP
programs as detailed below:
BCALV_EDIT_01 This report illustrates the simplest case of using an editable/noneditable ALV Grid Control.
BCALV_EDIT_02 This report illustrates how to set chosen cells of an ALV Grid Control editable.
BCALV_EDIT_03 In this example the user may change values of fields SEATSOCC (occupied seats) and/or PLANETYPE.
The report checks the input value(s) semantically and provides protocol messages in case of error
BCALV_EDIT_04 This report illustrates how to add and remove lines to a table using the ALV Grid Control and how to
implement the saving of the new data.
BCALV_EDIT_05 This example shows how to use checkboxes within an ALV Grid Control. You learn:
(1) how to define a column for editable checkboxes for an attribute of your list
(2) how to evaluate the checked checkboxes
(3) how to switch between editable and non-editable checkboxes
BCALV_EDIT_06 This example shows how to define a dropdown listbox for all cells of one column in an editable ALV
Grid Control.
BCALV_EDIT_07 This example shows how to define dropdown listboxes for particular cells of your output table.
BCALV_EDIT_08 This report implements an ALV Grid Control with an application specific F4 help. The following aspects
are dealt with:
(1) how to replace the standard f4 help
(2) how to pass the selected value to the ALV Grid Control
(3) how to build an f4 help, whose value range depend on a value of another cell.
Rgds
Anversha -
Use of events and interface in class
Dear All,
Could you please explain why we use events and interface in class.
Also please tell me the use of TRY and ENDTRY.
Regards,
AmarEvents may be a way of communication b/w classes. Imagine you want to call certain code from one class, you would need for that public method, but you don't want to expose it to external user. So you may use events for that. Also events are used to notify that certain state of class has changed (tiggering event). Then all handlers of this event executes and react accordingly.
Interfaces are a way of provide a service to class which implements it. Imagine that you have class office and hotel and gas station . They don't seems to have something in common. However, there can be some external energy provider which will be an interface. Each class which want to have a lease with this energy provided can implement it (the implementation can differ in some way), so he can provided energy to different classes. This way you will achieve polimorphism (meaning you call one interface method, but code behind it differs from class to class).
Interfaces are also means of multiple inheritance. One class can implement several service (interfaces). In contrary it can oly inherit from one class.
Try endtry are just new way of handling exceptions .
Try to search a litte bit you will find lots of info on the above.
Regards
Marcin -
OO ALV validation check without event DATA_CHANGED and results via popup
Hi Gurus,
I'm working on SAP ECC 6.0 and I'm facing a problem during the ALV validation check. My requirement is to show an ALV with one editable field. In addition I have to pre-initialize this field in order to give a reference value to the user, but this is not always correct, or better, this field represent the maximum amount available, but, because of other validation checks, this field is not always correct (and it's ok, it's not a problem), and if it is greater than another amount I have to display an error.
I was thinking about catching the event DATA_CHANGED and do the checks inside of it. It works but not completely, because if the user do not change anything the event is not raised and I cannot do my checks.
My solution is to do the checks without catching the DATA_CHANGED event and display the errors in a separate popup window.
The checks are ok, but I have problems during the displaying of the results: I would like to use the class CL_ALV_CHANGED_DATA_PROTOCOL in order to display the errors, I tried creating the Object:
Data: go_Error Type Ref To CL_ALV_CHANGED_DATA_PROTOCOL.
Create Object go_Error
Exporting
* i_container =
i_calling_alv = go_0200_Alv
giving it a reference to the ALV (the go_0200_Alv is my CL_GUI_ALV_GRID object).
Then I did many Call Methods to the Add_Protocol_Entry to add the message in the protocol and then display them calling the Display_Protocol Method of my "go_Error".
The Popup is shown and the "links" to the ALV are correct (if I double click a message it selects the corresponding row of the ALV, but (and it's my problem) I cannot see the Description of the Column with the error: the popup window is an ALV grid itself with 3 columns ("Message Type", "Name of the Column" and "Message Text") where I can see correctly the Message Type and the Message Text but not the name of the column.
Debugging the code I found that If I catch the event, the parameter er_Data_Changed (the class CL_ALV_CHANGED_DATA_PROTOCOL) is filled with some other informations like Modified Rows and other attributes like FieldCatalog, Row-ID, so I thought the problem was related to that, and that's why I replicated the whole case in my processing, filling every table I would see if I use the "standard way" for validation. Bu it didn't correct the error. I still don't see the name of the Column.
This is my code, it's only the part interested, If you need other informations, please ask me and I will copy them.
form CHECK_ALV_0200_0110 Changing pc_Error Type Char01.
Data: lt_MatchK1 Type tp_Matches1_Key_t,
l_Message Type Char100,
l_MessX Type String,
l_QtaRes Type ZDM_AMT_ASSIGNED,
l_QtaAcc Type ZDM_AMT_ACCRUED,
l_QtaStep Type ZDM_AMT_ASSIGNED.
Field-Symbols: <fs_Table> Type Standard Table,
<fs_Master> Type Standard Table,
<fs_Mod_Cell> Type LVC_S_MODI,
<fs_Line> Type Any,
<fs_Field> Type Any,
<fs_Any> Type Any.
Data lt_Matches_Alv_Mod Type tp_Matches1_Alv_t.
Data ls_Modi Type LVC_S_MODI.
Data: l_Row_ID Type I,
l_Tabix Type I.
Field-Symbols: <fs_Match_ALV> Type tp_Matches1_Alv_s.
Free go_Error.
CREATE OBJECT go_Error
EXPORTING
* i_container =
i_calling_alv = go_0200_Alv
* Validation Checks
Clear pc_Error.
Clear ls_Modi.
Loop At gt_Matches1_Alv Assigning <fs_Match_ALV>.
l_Tabix = Sy-Tabix.
Check <fs_Match_ALV>-Status Eq con_Status_Temp.
* Set the Modified Row for the CL_ALV_CHANGED_DATA_PROTOCOL object
Append <fs_Match_ALV> To lt_Matches_Alv_Mod.
Add 1 To ls_Modi-Row_Id.
ls_Modi-FieldName = 'AMT_DEDUCTED'.
Write <fs_Match_ALV>-Amt_Deducted To ls_Modi-Value Currency <fs_Match_ALV>-Waers.
Condense ls_Modi-Value No-Gaps.
ls_Modi-Tabix = l_Tabix.
Append ls_Modi To: go_Error->mt_Mod_Cells,
go_Error->mt_Good_Cells.
l_Row_ID = ls_Modi-Row_Id.
Clear l_Message.
If <fs_Match_ALV>-Amt_Deducted Eq 0.
pc_Error = con_X.
CALL METHOD go_Error->Add_Protocol_Entry
EXPORTING
i_msgid = 'ZDMV'
i_msgty = 'E'
i_msgno = '005'
* i_msgv1 =
* i_msgv2 =
* i_msgv3 =
* i_msgv4 =
i_fieldname = 'AMT_DEDUCTED'
i_row_id = l_Row_ID
* i_tabix =
Continue.
EndIf.
Case g_Dynnr.
When '0110'.
Perform Get_ResQtaDispute1 Using lt_MatchK1
<fs_Match_ALV>
Changing l_QtaRes.
Perform Get_ResQtaAccrued1 Using <fs_Match_ALV>
Changing l_QtaAcc.
* When '0111'.
* Perform Get_ResQtaDispute2 Using lt_MatchK2
* <fs_Match_ALV>
* Changing l_QtaRes.
* Perform Get_ResQtaAccrued2 Using <fs_Match_ALV>
* Changing l_QtaAcc.
EndCase.
Add <fs_Match_ALV>-Amt_Deducted To l_QtaStep.
If l_QtaStep > l_QtaRes.
* Store the Error
pc_Error = con_X.
Write l_QtaRes To l_Message Currency <fs_Match_ALV>-Waers.
Condense l_Message No-Gaps.
CALL METHOD go_Error->Add_Protocol_Entry
EXPORTING
i_msgid = 'ZDMV'
i_msgty = 'E'
i_msgno = '002'
i_msgv1 = l_Message
* i_msgv2 =
* i_msgv3 =
* i_msgv4 =
i_fieldname = 'AMT_DEDUCTED'
i_row_id = l_Row_ID
* i_tabix =
EndIf.
If l_QtaStep > l_QtaAcc.
* Store the Error
pc_Error = con_X.
Write l_QtaAcc To l_Message Currency <fs_Match_ALV>-Waers.
Condense l_Message No-Gaps.
CALL METHOD go_Error->Add_Protocol_Entry
EXPORTING
i_msgid = 'ZDMV'
i_msgty = 'E'
i_msgno = '002'
i_msgv1 = l_Message
* i_msgv2 =
* i_msgv3 =
* i_msgv4 =
i_fieldname = 'AMT_DEDUCTED'
i_row_id = l_Row_ID
* i_tabix =
EndIf.
EndLoop.
If pc_Error Eq con_X.
* If there was at least one error, Display the Popup
go_Error->mt_FieldCatalog[] = gt_0200_FCat[].
go_Error->ms_Layout-Zebra = con_X.
Get Reference Of lt_Matches_Alv_Mod[] Into go_Error->Mp_Mod_Rows.
CALL METHOD go_error->display_protocol
* EXPORTING
* i_container =
* i_display_toolbar =
* i_optimize_columns =
EndIf.
EndForm.
Do you know if there is a particular issue about that? Or, maybe, I'm doing something wrong...
Please help me
Regards,
Claudio
Edited by: Claudio Distrutti on Oct 31, 2008 12:38 PMHello Claudio
Nobody prevents you from calling your event handler method go_grid->HANDLE_DATA_CHANGED directly!
What do I mean with that?
I assume you are calling method go_grid->CHECK_CHANGED_DATA at the beginning of the PAI module to catch any changes from the editable ALV grid. Within the event handler method you do your validation and send the error popup if necessary.
Now when the user closes the error popup and pushes e.g. the SAVE button then I can happen that method HANDLE_DATA_CHANGED does not trigger event DATA_CHANGED because nothing was indeed changed on the ALV grid. Yet the invalid value is still there.
However within the FORM routine for saving the data you can just call your event handler method directly:
FORM save_data.
CALL METHOD go_grid->handle_data_changed
EXPORTING
* er_data_changed =
e_ucomm = 'SAVE'.
ENDFORM.
Now within your event handler method you always know when the method was called because if method CHECK_CHANGED_DATA triggers event DATA_CHANGED the IMPORTING parameter ER_DATA_CHANGED is bound whereas it is empty when the method is called from your SAVE routine.
METHOD handle_data_changed.
DATA: lo_log TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
IF ( er_data_changed IS BOUND ).
lo_log = er_data_changed.
ELSE.
CREATE OBJECT lo_log.
ENDIF.
" Do the validations and send error log if necessary
lo_log->DISPLAY_PROTOCOL( ).
ENDMETHOD.
Regards
Uwe -
Page cannot be displayed' error when 2 events (FireAction and GO) fired
We have created a framework page where FireAction event will be executed
when the value of a calendar item is modified. When we modify the
value and leave the cursor in the field (without tabbing out), and click
GO button, 'Page cannot be displayed' error message will be displayed.
When FireAction event is started, we use CO to retrieve the event. And
when the cursor remains in item1 after being modified and click GO,
2 events will be started (the FireAction event and the GO button's event)
and 'Page cannot be displayed' error will be shown since CO is retrieving
2 events at the same time.
Since by changing certain fields of framework page without tabbing out
is a regualar operation, how can we go around this error when we are
using FireAction event?
sample34_00co.java
package oracle.apps.xx03.ap.webui;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.OADialogPage;
import java.util.Calendar;
* Controller for ...
public class Sample34_00CO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
public StringBuffer message = new StringBuffer();
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
Calendar cal = Calendar.getInstance();
// When the browser back button is not executed
if (!pageContext.isBackNavigationFired(false))
System.out.println("NOT FROM BACK BUTTON!! ["+cal.getTime()+"]");
// When the browser back button is executed
else
System.out.println("FROM BACK BUTTON!! ["+cal.getTime()+"]");
//Action being performed when the browser back button is executed
OADialogPage dialogPage = new OADialogPage(STATE_LOSS_ERROR);
pageContext.redirectToDialogPage(dialogPage);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
Calendar cal = Calendar.getInstance();
if ( "updateItem1".equals(pageContext.getParameter(EVENT_PARAM)) )
//When FireAction is executed
System.out.println("item1 FireAction is executed! ["+cal.getTime()+"]");
else
//When other actions beside FireAction is executed
System.out.println("item1 FireAction is not executed! ["+cal.getTime() +"]");
sample34_00pg.xml
<?xml version = '1.0' encoding = 'UTF-8'?>
<!-- dbdrv: exec java oracle/jrad/tools/xml/importer XMLImporter.class java &phase=dat+24 checkfile:~PROD:~PATH:~FILE &fullpath:~PROD:~PATH:~FILE -username &un_apps -password &pw_apps -dbconnection &jdbc_db_addr -userId "1" -rootPackage /oracle/apps/~PROD -rootdir &fullpath:~PROD:mds:directory -->
<page xmlns:jrad="http://xmlns.oracle.com/jrad" xmlns:oa="http://xmlns.oracle.com/oa" xmlns:ui="http://xmlns.oracle.com/uix/ui" version="9.0.3.8.11_1183" xml:lang="en-US" xmlns:user="http://xmlns.oracle.com/jrad/user" xmlns="http://xmlns.oracle.com/jrad" file-version="$Header$">
<content>
<oa:pageLayout id="PageLayoutRN" windowTitle="Sample34_00 WindowTitle" amDefName="oracle.apps.fnd.framework.server.OAApplicationModule" title="Sample34_00 PageHeader">
<ui:corporateBranding>
<oa:image id="corporateBrandingImage" source="/OA_MEDIA/FNDSSCORP.gif"/>
</ui:corporateBranding>
<ui:contents>
<oa:messageComponentLayout id="MainRN" controllerClass="oracle.apps.xx03.ap.webui.Sample34_00CO">
<ui:contents>
<oa:messageTextInput id="item1" prompt="item1" dataType="DATE">
<ui:primaryClientAction>
<ui:fireAction event="updateItem1"/>
</ui:primaryClientAction>
</oa:messageTextInput>
<oa:messageLayout id="ButtonLayout">
<ui:contents>
<oa:submitButton id="Go" use="/oracle/apps/fnd/attributesets/Buttons/Go"/>
</ui:contents>
</oa:messageLayout>
</ui:contents>
</oa:messageComponentLayout>
</ui:contents>
</oa:pageLayout>
</content>
</page>
----------Shive...good one..!!
One thing that you can do if you don't wanna have PPR, is to validate date column in fire action event in CO in process form request, and raise an error if you don't find appropriate format or null , as per your requirement.
--Mukul -
RMI, event handling, and Winow.dispose()
Hi all,
If you combine RMI with an event handler and java.awt.Window.dispose(), the JVM hangs. The only way to solve this problem is by disposing of the frame from within SwingUtilities.invokeLater.
Please check the following code:
ServerInterface.java:_
import java.rmi.Remote;
import java.rmi.RemoteException;
public interface ServerInterface extends Remote {
void Send(ClientInterface CI) throws RemoteException;
ClientInterface.java:_
import java.rmi.Remote;
import java.rmi.RemoteException;
public interface ClientInterface extends Remote {
void Send() throws RemoteException;
Server.java:_
import java.rmi.RemoteException;
import java.rmi.server.UnicastRemoteObject;
import java.rmi.Naming;
public class Server extends UnicastRemoteObject implements ServerInterface {
public Server() throws RemoteException {}
public void Send (ClientInterface CI)
try { CI.Send(); } catch (Throwable t){System.out.println(t);}
public static void main(String args[])
try {
Naming.rebind ( "rmi://localhost:1099/Testing",new Server() );
System.err.println ("Server ready");
catch ( Throwable t )
System.out.println ( t );
Client.java:_
import java.rmi.RemoteException;
import java.rmi.server.UnicastRemoteObject;
import java.rmi.Naming;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
import javax.swing.SwingUtilities;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JButton;
public class Client extends UnicastRemoteObject implements ClientInterface,ActionListener {
static JFrame A=null;
static ServerInterface ServerSide;
private Client() throws RemoteException {}
public void Send()
if ( A == null )
A = Display("Remove"); // display frame
else // remove frame
SwingUtilities.invokeLater ( new Runnable(){public void run(){A.dispose();A=null;}} );
public static void main(String[] args)
try {
ServerSide = (ServerInterface) Naming.lookup ( "rmi://localhost:1099/Testing" );
ServerSide.Send(new Client());
catch ( Throwable t )
System.out.println ( t );
public void actionPerformed(ActionEvent e)
try { ServerSide.Send(new Client()); } catch (Throwable t){System.out.println(t);}
private JFrame Display (String label)
JButton b = new JButton (label);
b.addActionListener(this);
JPanel p = new JPanel ();
p.add (b);
JFrame frame = new JFrame ();
frame.getContentPane().add(p);
frame.pack();
frame.setVisible(true);
return frame;
}You can do any GUI work from within an event handler, only when you try to dispose of a frame, the system hangs !!!Thank you for responding to my problem.
unless their documentation says otherwise (eg: repaint). I checked the API for "repaint()", but it didn't mention anything about the EDT. What documentation you are referring to ?
What I don't understand is that why "dispose()" works well on non-RMI systems and hangs the machine on RMI systems ? It even works fine on RMI system providing that you are not disposing of the frame from within an event handler. So the problem occurs only if you are combining the three elements: RMI, event handler, and dispose().
Conversely, you should avoid doing anything that may take a long time on the EDT. Perhaps remote methods fall into that category.It is true that we should avoid doing anything that may take a long time on the EDT; however, in this particular example, dispose() is not done through a remote call, it is done on the client where the frame should be removed.
I also tried disposing of the frame from within a normal Thread (instead of the EDT), and it worked just fine. -
how do i get my calendar events back and why the power drain after upgrading my operating system to 7.1?
Thought I'd reply to this seen as no one else has, I am also experiencing very similar problems with my 4s and by the looks of it is it's across all handsets. I've never had any battery issues with my iPhone even 7.0.6 was fine, but since updating to 7.1 the battery is ticking down very fast. I fully charged in the morning and left it in my locker all day at work when I got my hands on it it's gone down to 52% just on its own!!
I really hope they sort this out fast the irony is 7.1 was supposed to help battery life! -
Training n event management and pd
Hi gurus,
my cliient wants to implement training n event mgnmt and pd.client is not specific about the procedures of training and development. he wants to implement as per the best practices of sap. i was only into om , pa and payroll.
i dont even have a tinge of idea abt these submodules. i tried searching in forums and other sites to to my dissapointmnt. i am in a big soup now as i need to gather the requirement and do the configurations in a weeks time i.e by next weekend. plzzzzzz help me out with some best practices or some config docs as i dont know even the basics of these. I would appreciate if some body is helping me out with config docs.
Thanks n advance,
tulsiHi Tulsi,
Please go to our help website :
Appraisals
http://help.sap.com/saphelp_47x200/helpdata/en/77/bff8ab4a2911d182b80000e829fbfe/frameset.htm
and you can also use the link:
https://websmp209.sap-ag.de/bestpractices
Thanks
Chetan -
Training & Event management and Appraisal
Hi,
Can anyone tell us that Training & Event management and Appraisal are available standard ESS package?
Thanks,
AnumitYes, Training & Event management and Appraisal are available in ITS based ESS business package.
But latest ESS business package(webdynpro based) do not have training and event management. You may need to deploy Learning solution. Full functionality of Appraisal is available with ehp4 of ESS BP. -
Calendar can recognize and derive event start and end times from the text description entered. However, when it seizes on a time (start and/or end) and automatically enters it as the start and/or end time, it also (sigh) deletes the time from the text. I enter the times as reminders for me, how can one prevent them from being deleted by Calendar??
I am having the same darn problem. I really dislike this auto feature in Calendar.
Can anyone help us please? -
HT2513 iCal string of events repeat and end on a given date?
Is there a way to have any given string of events repeat and end on a given date?
Example, I have a different training regiment for each day leading up to an event/date and then will have the same training regiment again leading up to another event. I want each day's training regiment to show up as an event per day... but don't want to have to post each days repeat string of training prior to each event... and they don't nessecarily repeat monlthy or regularly... I want to set an end date and all the training fill in from that date backwards. Is this possible??Does this work any better? New-jobtrigger requires a datetime object.
$csv6=Import-Csv D:\Lzero\Coll_Schd\Dependent_List.csv
foreach($cs in $csv6)
{$sys=$cs.CI
[datetime] $schd=$cs.RebootSchedule
$user="Domain\username"
$paswd=ConvertTo-SecureString -String "P@ssWord" -AsPlainText -Force
$Credential=New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $user,$paswd
Register-ScheduledJob -Name System_Restart -ScriptBlock {
Restart-Computer -ComputerName $sys -Force -wait} -Trigger (New-JobTrigger -At $schd -Once) -ScheduledJobOption (New-ScheduledJobOption -RunElevated) -Credential $Credential -
Allow Non-Administrator accounts to create event sources and write to event logs
We are setting up BizTalk 2013 in Windows Server 2012 and one of the requirements is to allow the service account to create sources and write in event logs (Application) of the BizTalk servers. We have found what it seems to be a simple solution for this
without giving service accounts local admin rights.
Give Full control for the following registry keys to the service accounts or groups to allow creating of event sources and write to event logs:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Security
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Security
Note: when changing permissions for EventLog key, the child keys will inherit the permissions by default except Security key which must be done manually.
Initial tests using a .net test app seems to work as expected. New event sources are being created in the event logs and writing to the event logs after that works perfectly.
The above method has been deployed in production and this is the most suitable solution for us.Hi Keong6806,
Thanks a lot for posting and sharing here.
Do you have any other questions regarding this topic? If not I would change the type as 'Discussion' then.
Best Regards,
Elaine
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Maybe you are looking for
-
Can you set a default print quality?
Good Morning Everyone, I've been putting up with this annoyance since I install PSE 8. I've looked for a solution but can't find one. Hope you can help. Here's the problem. Every time I print a document PSE 8 defaults to a print quality of 1200 dpi,
-
How do you delete a member in outline?
Hi, I am sure this question has been asked many times in this forum but I can't seem to find the answer. Also, it seems to me that this forum does not retrieve threads that are older than 2 years. When I tried to delete a member in outline, I get the
-
Why can't I print all of a sudden? - Can you suggest?
I have networked a printer through my new airport extreme. Everything "had" worked fine. I was able to print wirelessly with my Macbook and a hardwired PC. It has been several weeks since I've tried printing.....and it won't work? I have no idea what
-
I have installed Windows 8.1 in my 15" Macbook Pro with Retina late 2013 using EFI (without bootcamp) and also installed the latest BootCamp drivers. However, I have everything work (including the NVidia discrete graphics) but the usb. Every time I p
-
I bought the iphone 5 has not been one week do not understand why the home key of the time activities at stops working, not crash or fall. hope its help, probably due to software, not hardware failure, what do I do now?