Ever since I updated to iOS 7 my speakers aren't working? What should I do?, Ever since I updated to iOS 7 my speakers aren't working? What should I do?
Ever since I have updated to IOS7 the speakers in my ipad3 has not been working, do you have any suggestions as to what I should do?
Are you able to hear music through the headphone jack?
You may need to plug the headphones in & out a few times.
Also, try resetting and / or restarting the iPad.
Similar Messages
-
I keep getting this message when I try to update my apps and when trying to purchase new apps from the App Store. I checked my iTunes ID and it turns out that the country shown there is the one that I am actually living in. And it is the same as my billing address, but when I tried to update my apps again, I keep getting this message, 'you are not eligible for purchase of this item from the US store, please switch to the Malaysia store'. How do I solve this issue.
Besides ever since I updated my phone iOS it has started misbehaving, quite irritably at times. Dropped calls, slow typing, apps open very slowly, apps cannot be updated with prompts coming up like, this app cannot be updated now, please try again. I had to delete quite a few apps and reinstall them again. I had a trouble free experience with this phone till now, but is apple losing its magic.Thanks too all the people who responded. . . . (noone)
Got it sorted though. Seems that Apple has issues with multiple apple id's.
Seems i had to somehow remember and use the original id i had when i first bought my 1st iPhone. . . .
Even after that it was extremely hard to get my apps back on my PC.
If anyone else has the same problem. . . .email Apple. Cya. -
Ever since I updated my iPhone 4S and my iPad 2 to IOS 6 all my iMessages are coming to both my iPhone and my IPad. How do I stop the iMessages I send and receive on my phone from receiving on my iPad as well? I have tried going into my settings and making sure I'm only set up to receive iMessages to my cell number and not my email....but that didn't fix the problem.
Here the way to do it, for both, or for only one Go into your settings, Messages and turn on iMessage. It will then send messages that are iMessages to both your iPad and iPhone. You can also turn off this feature on the iPad if you do not want to receive messages on the iPad.
-
Ever since I had updated my phone to ios 6, i noticed that it no longer saved photos to my camera roll. If I take a picture on Instagram, it will not automatically save it to my camera roll as it used to do, nor does it save any image, I just want it fixed.
To gdgmacguy your a f****** idiot for one I'm having the same problem as pennymar. And you tell me to quit whinning. You got more problems then the iOS 6 you did not answer my question nor the other 13 or whatever you replied to within a 30 min time frame. You must got nothing better to do then to harass people and to pretend you know something about apple products. Which you don't from what I've read the other advices you should have gave to other people. But you didn't you replied a question back to the people asking a question. So if your not gonna use these community forums the right way don't use them at all.
-
Ever since I updated to the IOS 6, I no longer can play my music in the car! It is plug and play! It just sits there saying connecting and nothing happens. A couple of my friends have said the same thing. Any ideas? Help please!
Hello ..do you have a history on the phone? did you get it wet? was it dropped? have you been using an authentic ORIGINAL apple charging cable?
this problem occurs when there is a short circuit in the phone... you most likely got it wet at some point and maybe didnt even realize it? The moisture in the phone hasb probablly oxidized one or several capacitors, integrated chips thereby short circuiting the phone. that is why he phone is acting erratic because these short circuits inadvertently "activates" other circuits.. eventually the phone will not turn on anymore- the heat will stress the citcuit board and you will have discontinuity along your main power lines and the phone will cease to function..i see this alllll the time in our shop
the fact you upgraded to ios6 will even work the phone harder because its a more powerful operating system taking full advantage of the A4 chip.. -
ever since I downloaded ios 5. and the battery update on my ipodtouch 4gen it can be fully charged play like three songs then it says 20%left then it dies. My ipod was fine before the download.
Try the standard fixes:
- Reset. Nothing wil be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem than an appointment at the Genius Bar of an Apple store is in order. -
Ever since i got ios 6 it has been a slower and it says i only have 2 gb left when i have10 app and 0 songs. I got this iPod a few years ago so the warranty has already expired. Please if there is any way I can upgrade let me know.
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. Sometimes when you update and do other things files will be corrupted and make the "other" category large. Restoring from backup usually reduce the other .
- Restore to factory settings/new iPod. -
Ever since updating my iPad with the iOS 8 and 8.0.2 it has been much slower in every way. Any suggestions besides restoring to last iOS?
Hi Arianelleangel,
Welcome to the Support Communities! If you are having issues trying to update your Aunt's iPad, the troubleshooting steps below may help:
Resolve issues with an over-the-air iOS update - Apple Support
Update does not complete
If you're installing the update and the progress bar appears to move slowly, be patient. The time an update takes depends on the size of the update and the number of files on the device.
When you're updating over the air, keep your device connected to a power source so that it doesn't run out of power. If your device does run out of power, connect it to a power source and turn on the device to let the update or restore complete.
If the update never completes and the progress bar hasn't moved for an extended time, try restarting your device. If you still see the issue after you restart, see what to do if your device appears frozen or won't start.
I hope this information helps ....
- Judy -
Was iOS 5 meant for iPad 1st generation? Ever since updating it is slower and slower.
Was iOS 5 meant for iPad 1st generation? Ever since updating it is slower and slower.
When I first updated my original,iPad I had a number of issues with it, crashes, some sluggishness, and things like that. When the infest incremental update was released a little while later, it seemed to fix the issues on the iPad - or at least it made a very big difference.
I never updated it all the way to 5.1.1 - because I bought the new iPad so I have no first hand experience with 5.1.1 on the original iPad.
You can try some basic troubleshooting steps and see if they make a difference.
Quit all apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Sometimes this can help. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If you have issues with Safari - Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
Ever since i updated my ipod to the ios 6 itunes doesnt recognize it. Why?
Ever since i updated my ipod to the ios 6 , itunes doesnt recognize it. Why?
Try force rebooting it, hold down the power and home button for 10 seconds until the apple boot logo comes up. If that doesn't work, try rebooting your computer.
-
Cannot shoot video ever since iOS update
Ever since I updated my mini ipad with the iOS I can't shoot a video
Have you tried resetting your iPad? Hold down the sleep and home keys until you see the silver apple. Let it reboot and see if you can shoot video. often when things glitch, a reset can clear it up.
-
My iPod keeps quitting the App Store unexpectedly ever since I updated to iOS 6. What do I do?
You can try to shut off you device and turn in back on. if that dont work, re update to ios 6 again.
-
Ever since I updated my iphone3 to ios 6, I am unable to make purchases on itunes or Apps. I click onto what I want and it appears on my home screen but justs keeps saying waiting. Does anybody know what to do to rectify it.
Hi imobl,
Thanks for your response, I forgot to add that the five 3uk sims we have in use, I have tried all of them none of them are recongnised non of them have pin codes, I even purchased four more sims Tmobile (original carrier) Vodaphone, 3 and giffgaff. -
Ever since I got my iPhone 4S it was working perfectly. The day I updated to iOS 5.1 it started having Wi-Fi issues. The Wi-Fi was working and on my iPhone it wasn't even connecting to the network. I called Verizon and they tried troubleshooting it and still it didn't work. They then sent me a new iPhone 4S for free. It was working perfectly. Then I updated to iOS 5.1 (it came with iOS 5.0.1) and then it started having the Wi-Fi problem again. My dad's phone hasn't been having that problem. And he updated to iOS 5.1. Is this a software problem or is it a problem with the iPhone's hardware??? Like the Wi-Fi antenna or something like that. Thanks for the help. I really appreciate it.
Ok I think it's a problem with my router. I went to my cousin's house and the Wi-Fi worked there perfectly. I was even able to download many apps. So I guess my router probably can't take in more connections. Oh well thanks anyway.
-
Ever since updating my iphone to iOS 6.0, itunes repeats songs it already played. anyone else have a similar issue? it's annoying.
Hi
I have the same problem.
After upgrading My phone repeats the same song forever.
It doesn't matter if i play a playlist with 100 songs or try to play an album.
What the f- ? -
I recently updated my IOS using the beta found on an iTunes account link... Ever since then I've been unable to log into my iMessages and FaceTime account through my iTunes. The only explanation it gives me is that my connection was lost.... What to do?
It was downloaded through my iTunes account... So im sure it wasn't pirated. It's nothing more than a beta test to work out the bugs. But do u have any suggestions as to how i can about redownloading the same iOS but now the 'bugs' should be all worked out....
Maybe you are looking for
-
i have been using Lr for years. No recent changes to my preferences on Lr4.4 or my MacBookPro. When i tried to import RAW while traveling in Vietnam, i receive this error message "some import operations were not performed" then there is a list of my
-
Problems with PObject::destroy(void*) and commit after this
Hi there I have some problem with delete garbage objects. For example: I create my object MyObject * o = new (conn,"MY#TABLE") MyObject(); if (some_condition) PObject::destroy(o); delete o; //this work well //but after this conn->commit(); I have got
-
How can I print a full page 8.5x11 photo using mg2520? My operating system in windows 8
I am currently running windows 8 and using a canon pixma mg 2520 and cannot print full size 8.5x11 prints. I can print 4x6 but would like to print full size pictures...please help!!!!!!!!!!1
-
PDF Printer fails to create document
I have Adobe Acrobat 8.1.2 Standard and today suddenly I cannot create a PDF file from Word 2007. It will create PDF files of up to 5-6 pages but when I try the file that contains 657 pages it will only go to page 90 before I get this error message:
-
Import TR RD1K903861 into system contain RD1K903861 related to other area
Dears, I have the following situation I have two Separate ECC environments old and new new one built as a system copy from old one (old Prod) the old landscape is RD1, RQ1, RP1. and the new also is RD1,RQ1,RP1. SP stack level in old < SP in the new.