Ever since upgrade install my iPad and I phone ring simultanios

EEver since upgrade to iOS 8 my phone and I pad ring simultaneously

My original post above was completely incorrect. You shouldn't need to completely turn off wi-fi. The following quotes are from Connect your iPhone, iPad, and iPod touch using Continuity and did work for me.
Phone calls
To make and receive phone calls on your iPad or iPod touch, here's what you need:
Your iPhone needs to use iOS 8 or later.
Both devices must be on the same Wi-Fi network.
Both devices must be signed in to FaceTime using the same Apple ID.
Wi-Fi Calling needs to be off.
Turn off iPhone cellular calls
To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.

Similar Messages

  • Since upgrading itunes, my iPad and iPhone aren't recognized by iTunes. Anyone have any ideas on a resolution?

    I upgraded iTunes last week, and since then, iTunes doesn't recognize my iPad and iPhone.  I want to change some of my music, but can't change anything!!  Any one have ideas as to how I can resolve this issue?  I've tried unistalling and then reinstalling iTunes with no luck. 

    For Mac  >  http://support.apple.com/kb/ts1591

  • Problems ever since I installed this OS

    I user Cyberduck to upload files for my interactive class and it worked fine on Leopard but ever since I installed Snow Leopard and I click on the icon on my dock it just bounces a few times and doesn't even open. Also, I try to access my courses site and everytime I try to log in it crashes on me (same thing happens to another friend who recently installed it). How can I fix these problems?

    Cyberdug verison 3.3b2 or later is needed for Snow Leopard. See:
    http://snowleopard.wikidot.com/
    Logging in via web browser with crashes may mean you are using a browser that hasn't been tested with it, or a software that hasn't been tested with it. Look at the above listing, or the listing below for Snow Leopard compatibility:
    http://www.macintouch.com/specialreports/snowleopard/slcompat.html
    If you have any peripherals attached, make sure those are compatible too:
    http://support.apple.com/kb/HT3669
    If your friend is having issues, I suggest they post here another topic thread to isolate their problem if the above advice is insufficient.
    Message was edited by: a brody

  • Ever since upgrading to iTunes 11.0, I can no longer sync Contacts and Calendar from my iMac (10.7.5) To my iPad2 (6.0.1) via Wi-Fi.  I believe All my settings are correct.  Device is recognized and sync From iPad is possible.

    Ever since upgrading to iTunes 11.0, I can no longer sync Contacts and Calendar from my iMac (10.7.5) To my iPad2 (6.0.1) via Wi-Fi.  I believe All my settings are correct.  Device is recognized and sync From iPad is possible.  Tablet is past warranty, so TechSup won't help.  Any suggestions?

    Thank you Meta, but I could not get the calendar and contact sync with Gmail to work. Apple support already suggested to use Google or a Windows PC. Maybe I should actually reset and try my old Windows PC. Seriously, ... can this be the solution after a Mac OS update for pure Apple users?

  • My iod touch 4g is so laggy ever since I installed iOS 6.0.1 any answers on how I make it faster? Because if I can't play my fav games and do simple tasks, I might an android smartphone for the sake of being cheap and faster

    My iPod touch 4g is so laggy ever since I installed iOS 6.0.1 its so frustrating I can't even play my favourite games, and if I can't play my favourite games, I might as well get an android phone for the sake of being fast.

    This tends to hlep
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine.  This does not happen with any messages by any means, and it is not any type of certain message

    Ever since upgrading to Mountain Lion, my AOL messages sometimes, but not always open with a blank page. If I open AOL in Firefox, the messages open fine.  This does not happen with any messages by any means, and it is not any type of certain message. In fact, in the same screen I can often open an email from the same sender with email intact. This is weird. Sometimes I close the page and open a new page. Sometimes that works and sometimes it does not. It is a very annoying thing.

    Hi,
    When you start Messages fro the first time you are asked for an Apple ID
    When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
    The App should have also picked on on those iChat Accounst you had before.
    These should be Enabled if they were when you last used iChat.
    Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
    In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
    Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
    This will give you separate iChat type Buddy lists.
    You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
    You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
    I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
    There is no Buddy list for iMessages side
    No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
    Obviously an Apple ID can be an email or look like one.
    In some cases they are also valid AIM Screen Names as well.
    In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
    11:31 PM      Saturday; August 11, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Ever since I installed Lion my internet connection comes and goes, has anyone else had the same experience. have rung Apple Care and they have reset my connection but it is still happening

    ever since I installed Lion my internet connection comes and goes....have reported this to Apple Care who have helped me reset my connection but it is still happening...cant believe it is a fault of the ISP as my Iphone does not have this problem, nor does my PC laptop...is this a fault in the new system?

    Thanks so much but none of that helped.  It was driving me crazy because it would back up another external drive.  I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
    Thank you for your help and replying to this.  Guess I made my own issue!

  • Ever since upgrading to OS 10.9.5 Lightroom 5 will not launch. I even reinstalled it and it didn't help. Any suggestions?

    Ever since upgrading to OS 10.9.5 Lightroom 5 will not launch. I even reinstalled it and it didn't help. Any suggestions?

    Hmmm.  You've tried normal reboot etc., I assume.  Repaired permissions?  Trashed the app before reinstalling?  Is this a CC version or perpetual license?  All other apps are opening ok?  Trashed Lightroom's preferences?  How do I delete the Lightroom Preferences file? - The Lightroom Queen Help Desk & Members Area - Powered by Kayako Resol…

  • Ever since I installed the 3.6.6 version, I've experienced frequent "hanging" problem which never or hardly occured before. And it has become quite annoying. Should I restore to the older version?

    Ever since I installed Firefox 3.6.6, "hanging", which hardly happened before, has become so frequent that it is very annoying. My use habit and pattern has not changed. Should I just re-install the earlier version?
    == This happened ==
    A few times a week
    == It's hard to tell what triggers it. I could be writing a e-mail, or moving to another web site...

    Without knowing what's causing it, and therefore what options you have, I can't advise whether it's your 'best' option.
    Have you investigated whether it's an add-on or a plug-in - particularly Flash? Have you tried safe-mode? Have you tried anything?

  • Was iOS 5 meant for iPad 1st generation?  Ever since updating it is slower and slower.

    Was iOS 5 meant for iPad 1st generation?  Ever since updating it is slower and slower.

    When I first updated my original,iPad I had a number of issues with it, crashes, some sluggishness, and things like that. When the infest incremental update was released a little while later, it seemed to fix the issues on the iPad - or at least it made a very big difference.
    I never updated it all the way to 5.1.1 - because I bought the new iPad so I have no first hand experience with 5.1.1 on the original iPad.
    You can try some basic troubleshooting steps and see if they make a difference.
    Quit all apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Sometimes this can help. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If you have issues with Safari - Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow.  Any help anywhere?

    Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow.  Any help anywhere?

    wqn02h, first thing I would do is use Disk utility to repair permissions. Once this is done. Make sure you have the latest versions of the software you use. Also, check the manufacter of your printer/scanner for updated software. If they don't have updated software there are 3rd party alternatives that will work.
    Paul

  • Ever since upgrading to Lion my iMac opens to a different admin than the one last used and has to be switched. How can that be changed?

    How can I change which user boots at start up? Ever since upgrading to Lion X my iMac no longer opens to the user on it prior to shut down. It now opens to a user who is virtually never on - which is actually me under a different name. This division of my Mac happened when I switched to my new Mac and didn't know I had to use the same name to transfer my data. My old data is listed as a separate user. Over time my old user name brings up a window full of ???? at the bottom. It looks like no apps ever upgrade there. It is driving me crazy to have to now switch back each time I start my computer. (I am using an iMac with 3.06 GHz Intel Core 2 Duo processor).

    How can I change which user boots at start up? Ever since upgrading to Lion X my iMac no longer opens to the user on it prior to shut down. It now opens to a user who is virtually never on - which is actually me under a different name. This division of my Mac happened when I switched to my new Mac and didn't know I had to use the same name to transfer my data. My old data is listed as a separate user. Over time my old user name brings up a window full of ???? at the bottom. It looks like no apps ever upgrade there. It is driving me crazy to have to now switch back each time I start my computer. (I am using an iMac with 3.06 GHz Intel Core 2 Duo processor).

  • Zagg keyboard won't connect to iPad ever since upgrade to iOS 7.1.2

    Ever since I updated my iPad 3 to iOS 7.1.2, my Zagg keyboard won't connect to my iPad. I get the code but whenever i type it in I get no reaction. And after a few seconds I get "make sure your device is on and in range." Can someone please tell me a fix for this I've reset network settings, deleted the keyboard from the known list of devices and full charged my keyboard. Nothing's helping.

    I have a Zagg KB and it works well.
    First reset the iPad by holding the home and power keys down until the Apple logo appears (15-20 seconds).
    Be sure (stating the obvious) Bluetooth is turned on. Turn the Zagg KB on...it should start to hunt for the wireless network. Press the connect button on the Zagg KB - the red light should begin to blink. On the iPad (settings>Bluetooth) click on the Zagg.
    Barry

  • My iPhone 4S has been crashing all day, and so has my husbands. It has been working absolutely fine ever since upgrading to iOs7, became slow 2 days ago, and today it crashed during every application. Photos, text, calls, apps... EVERYTHING!

    Trying to take photos during Christmas Eve service and the whole thing just shuts down over and over. It's fully-charged, I keep minimal apps on it, and have followed all battery-saving techniques ever since upgrading to ios7. This is pretty important -- we have no other cameras in our home and now we have no way to take pictures Christmas Morning!!!

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Ok so it's what 1-25-13 Siri is down... AGAIN for the fourth ever since i got this iPad on Christmas so yea I need her to be back up and running... How do I fix it if you won't.

    Ok so it's what 1-25-13 Siri is down... AGAIN for the fourth ever since i got this iPad on Christmas so yea I need her to

    Randall-
    With some exceptions, Apple may not read this forum.  Many of us here are just people with time on our hands who want to help.
    If your WiFi internet link is not working, Siri will not work.  One thing you can try is to unplug your WiFi router for a few seconds.  Then reset the iPad's network at Settings-General-Reset-Reset Network Settings.  You may have to reconnect the iPad to the WiFi.
    There may be an iOS update beyond 6.0.1, in case that matters.
    Fred

Maybe you are looking for

  • HCM formps and Process - Get Process description

    Hi Experts, Im using HCM forms and process for Leave request. My problem is, Employee initates leave process in portal. If he choosed Annual leave in the form means, Hr clerk is the approver and is employee apply a Emergency leave then HR Manager is

  • Read cluster in schema function (PE04)

    Hi All, Anyone can help me to read payroll cluster using payroll function (PE04) . Thanks and regards, airawan

  • Possible to test aggregates via web template?

    Hi, Is there i similar transaction code to rsrt to test web templates (instead of queries), for aggregates? We have a web template with several data providers and queries, and it would be a lot easier to test via the template. BR, Niclas

  • Slow Log Rate Needed using cDAQ-9174

    All, I am logging strain data for a thermal sweep we are doing on one of our products.  The sweep occurs over a long period of time (48 hours) so I realistically want to log one signal per second.  I tried using a continuous sample and then subsettin

  • I can't see the Mac partition (and I can't install Mac Os X!)

    Well, I installed Windows XP, I used MacDrive, etc. Suddenly it appeared a blue screen (in XP) and now I can't see the Mac partition, even pressing Alt while booting. Also I can't reinstall Mac Os X because the Mac partition doesn't appear in the ins