Ever since upgrading to OS 10.7.2 I cannot save MacFamilyTree documents. They don't support autosave and versions. On 'Save' the dialogue says "WebsterNZFamilyTree.mftpk" could not be saved. Symium, the developer, has not been able to solve this
I also cannot Save As the file to another volume to keep working in that way. I have a MacBook pro (mid 2010) 2.66GHz Core i7, 8GB RAM.
I have the same problem. I have not used this sofware recently and was annoyed that it now seems to useless. Is the solution to upgrade and hope or get new software. If its the latter anyone got ant suggestions?
Similar Messages
-
Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Has anyone been able to solve the forgotten recovery password?
Has anyone been able to solve the forgotten recovery password?
Rmattich wrote:
I'm having the same issue. The password is unavailable and I can't uncheck the encrypt password checkbox. I don't care about the existing backups... I understand why without the password, the existing backups would be useless. I don't understand why I can't just delete the existing backups, uncheck the box and move on. -- Is this a bug or something? I have the phone, I am able to unlock and use the phone, why can't I reset the backup password in iTunes.
You can do what you want, but you must erase your phone to do it. Just restore the phone using iTunes and set it up as a New phone. As it is new you can install whatever content you want to, then make an unencrypted backup of it.
The reason you can't change your mind once you have an encrypted backup is to protect your private data. If it was possible to uncheck Encrypt Backup, then back up your phone, anyone who stole or found your phone could do this and thus have access to your private data from the new backup. -
I am having issues related to storage and I believe this is causing my computer to slow down. "Other" files part is the major occupier(180 GB). I have done Omni disk and multiple other cleaning(iTunes-device, restart, etc), yet have not been able to empty any more space, nor to speed up my computer? Any suggestions? All your contributions are welcomed. Thanks. Mehmet Mazhar Celikoyar
Below is the result:
Hardware Information:
MacBook Pro (15-inch, Mid 2009)
MacBook Pro - model: MacBookPro5,3
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
NVIDIA GeForce 9600M GT - VRAM: 512 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
HP IO - Path: /Library/StartupItems/HP IO
System Software:
OS X 10.9 (13A603) - Uptime: 3 days 22:8:6
Disk Information:
ST9500420ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (220.49 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.64)
com.livedrive.filesystems.livedrivefs (2.1.14)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.versioncueCS4.plist
[loaded] com.creativebe.MainMenuHelper.plist
[loaded] com.macpaw.CleanMyMac2.Agent.plist
[loaded] com.magican.castle.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.rim.BBDaemon.plist
[failed] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist
Launch Agents:
[loaded] com.adobe.CS4ServiceManager.plist
[loaded] com.hp.messagecenter.launcher.plist
[loaded] com.hp.productresearch.plist
[loaded] com.rim.BBLaunchAgent.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[failed] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
[failed] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
[failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
[failed] com.UninstallerTool.plist
[failed] com.VolumeWatcherTool.plist
[failed] com.zeobit.MacKeeper.Helper.plist
User Login Items:
BlackBerry Device Manager
HP Scheduler
3rd Party Preference Panes:
Adobe Version Cue CS4
DC30 Xact Driver Panel
Flash Player
Flip4Mac WMV
Perian
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Default Browser.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
OctoshapeWeb.plugin
Bad Fonts:
None
Time Machine:
Mobile backups: OFF
Auto backup: NO
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 278.75 GB
Destinations:
TOSHIBA EXT [Local] (Last used)
Total size: 2 TB
Total number of backups: 5
Oldest backup: 2013-10-24 23:21:31 +0000
Last backup: 2013-10-25 02:59:08 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 499.25 GB X 3)
Top Processes by CPU:
3% WindowServer
1% EtreCheck
1% Microsoft PowerPoint
0% BBLaunchAgent
0% fontd
0% aosnotifyd
Top Processes by Memory:
168 MB Microsoft PowerPoint
123 MB Safari
86 MB Mail
74 MB WindowServer
45 MB com.apple.WebKit.Networking
45 MB com.apple.WebKit.WebContent
41 MB Finder
41 MB PluginProcess
41 MB mds_stores
33 MB Notes
Virtual Memory Statistics:
72 MB Free RAM
1.27 GB Active RAM
1.24 GB Inactive RAM
667 MB Wired RAM
2.58 GB Page-ins
111 MB Page-outs -
I am getting a security code invalid error everytime I try to download a app or update my current apps? I looked online and a few people are having the same issues anyone been able to get this resolved? It's not just on Iphones either it's on all apple devices. I've called Apple customer service. I've wrote a complaint online as well so far no good.
Any help would be much appreciated Love to all and thanks!I have done that thousands of times for my security code. Doesn't work and I have called the bank and they say no problem with my card. I have also tried useing different cards all together with no luck idk what else to do? Help!
-
Ea 2700 has anyone been able to configure this router for trapping on a port
ea 2700 has anyone been able to configure this router for trapping on a port....if so can you help us?
Hi,
What do you mean by trapping on a port? Is it the same as port forwarding? The following link might help:
Setting up single Port Forwarding on Linksys Wi-Fi Routers and Smart Wi-Fi Routers -
When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"
You could try duplicating the Domain.sites2 file and launch this in iWeb. Delete the last page you edited and try saving. If that doesn't work, undo and try deleting another and so on...
If you can find the problem page you would only have to rebuild it rather than the whole site.
The other possibility is to create a new site on the same domain file and drag each page in turn down to it from the top site and try to save each time. -
I am trying to purchase a game and I'm getting a message saying your purchase could not be completed
I Am trying to purchase a game from my credit balance and I'm getting a message saying your purchase could not be completed
If you are getting a message to contact iTunes Support (these are user-to-user forums) :
- go to http://www.apple.com/support/itunes/ww
- click on your country's flag
- click on the Contact Support at the bottom of the left-hand column
- click on Contact iTunes Store Support on the right-hand side of the page
- then Purchases, Billing & Redemption -
How can I move someone's hair from one photo to another and place it on another person? I have gone through every instructional video you have and have not been able to master this
Open picture B, the one you wish to select the hair from to add to the picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the hair. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the hair to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position the hair from picture B.
In the layers palette you should see picture A as the background layer, and the hair (B) on a separate layer. -
I've tried a lot to get it to work, even using a new charger and putting it into Disk Mode. I really need help. Can anyone give me some advice? Thanks.
Hi Dawson777,
Thanks for visiting Apple Support Communities.
It sounds like you're receiving the message "An iPod has been detected, but it could not be identified properly" when you connect your iPod nano to your PC. You have tried some good troubleshooting steps already, and you may want to review the additional steps in this article:
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/ts3218
Best Regards,
Jeremy -
My new iPod touch 64 Gig has a problem after syncing with iTunes. My purchased apps no longer work. I touch them and they seem to try to open but they do not.
The only way I have found to fix this is as follows:
I delete one of the purchased apps. Then I go to the App Store and re-download and install the same app. After that, all my apps work again.
Please help.Download/install an app is a know possible solution.
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
Above from Apple's :
iOS: Troubleshooting applications purchased from the App Store -
My iphone 4 never had a problem with the personel hotspot until 2-3 days ago .
Now when I turn the hotspot on none of my other i-devices can see it. I have tried the turn on/off thing and I have tried the complete turn off holding the 2 buttons on both the phone and the other devices (ipad x 2 and ipods x 3). This is very frustrating.
Oh and I have spoken to my carrier it is not them.
Any suggestions?Setting >> General >> Cellular >> Cellular Data Network >> Reset Setting
Restart (hold on/off button >> slide to power off)
I got same prob after update ios 6.1 (not sure during update to 6.0.1) iphone 5 -
Anyone been able to solve this problem????
Anyone that has had that problem when updating their ipod....had they been able to fix it??
its been a week since i been trying to update my ipod but everytime it says there's an error.
I have no idea what to do....and Apple is doing nothing!and Apple is doing nothing!
What can Apple do for you? Have your read through all the suggestions in this forum (like making sure your anti-virus and firewall are off before trying the installation)? -
After downloading and installing OS X Update 10.10.3 I am not able to open my Phot App. It opens and immediately shuts down. I've sent messages to Apple for help and no answers. Help!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.
Maybe you are looking for
-
Security with Windows on an iMac OS X10.4
If I load Windows XP on my iMac, am I going to run into the same horrific security issues I had with Windows? The reason I went to a Mac was to get rid of all the viruses, etc. Also, do I need a special version of XP for the Mac or just load the soft
-
Hi We have different Scheduling Agreement's raised against a particular vendor with schedule lines for every order. Is there any way to restrict a particular agreement from being Goods Receipted? It might not serve the purpose if we just put a block
-
Help required Button/ Font rendering
Hello All, I have a JMenuItem that is a panel of buttons. Basically the user can initialise a screen by clicking a button from the panel in the menu item. All the buttons in the panel have the font property set as follows: b.setFont(new java.awt.Font
-
Will the Air download adobe flash player?
What adobe flash player version can i downlod to my iPad Air?
-
A question about "JOIN_OPERATOR_IMPLEMENTATION"
In this parameter,I want to know the good and the bad between I choose "yes" and "no" for each other. thanks