Every time I enable 3G I get 'No Service', why is it doing this?

Every time I enable 3G I get 'No Service', why is it doing this?,
But then sometimes it will get service but i cant use my 3G, only Edge works
Any Help is appreciated
Thanks in Advance

The most likely reason is that your carrier is not providing 3G service in the area where you're located. Contact your carrier for coverage details.

Similar Messages

Every time i launch garageband i get this message "Error code 28773 was returned by the Audio driver."

HI. I just got a new macbook pro 15".
every time i launch garageband i get this message
"Error code 28773 was returned by the Audio driver."
when i hit record, the shaded area in GB starts to advance, but it doesn't record any sound, and when i hit the space bar, the recorded area disappears.
anyone know how to fix this?
I have installed BOOM, but i think that's the only extra sound software i have.]
PLEASE HELP!
thanks,
mojoman22

Please read this whole message carefully, especially the warnings, before doing anything.
1. The changes to your configuration suggested here should be considered provisional; they may not solve your problem, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is causing the problem, seek help from its developer.
2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING. If you’re dissatisfied with the results of the procedure suggested below, restore from your backup. I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.
3. You should either remove or update the following system modification(s), if an update is available from the developer:
Parallels
and definitely remove at least the following:
Boom
† MacKeeper
† VirusBarrier
4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job. I can't be more specific, because I don't install such things myself. Please do your own research.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
Again, please don't ask me to do this research for you. You can do it better than I can, because I haven't installed the product and I may not even know what it is.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
5. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.
6. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.
Remove the "MacKeeper" crapware as follows.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions, nor do I intend to repeat the test.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select Go ▹ Applications from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. A dialog will pop up asking why you want to uninstall it. You don't have to provide that information. Enter anything you like in the text box, then click the Uninstall button. All the functional components of the software will be deleted. That's the only useful feature of "MacKeeper:" it deletes itself. Reboot.
Do not try to uninstall by dragging the MacKeeper icon in the Dock or the LaunchPad to the Trash.
Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this kind of material is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.

Every time I donwload anything, I get an unresponsive script.

Since installing Lion OSX, every time I download anything, I get an unresponsive script.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Every time I open Iphoto I get the following message: "A photo has been found in the iPhoto library that was not imported. Do you want to import it? Yes or No" Any suggestions?

Every time I open Iphoto I get the following message: "A photo has been found in the Iphoto library that was not imported. Does anyone have any suggestions?

Quit iPhoto and to to the iPhoto library (by default in your pictures folder) - right click (control click) on it and select show package contents - find the folder named import (on importing) and drag it to the desktop - DO NOT MAKE ANY OTHER CHANGES - launch iPhoto and you will be fine.
Open the import(ing) folder and if there is nothing in it that you need move it to the trash and empty the trash
LN

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

Every time I download anything I get an error message stating ...could not open ....dmg because it is either not a supported file type or the file has been damaged." What do I need to do to fix this problem?

For the last month or so, every time I download anything I get an error message stating "........could not open ...... .dmg because it is either not a supported file type or because the file has been damaged...." I do not know what to do to fix this issue. Any ideas?

hmmm.... try this
basic troubleshooting:
Repair Disk Permissions http://support.apple.com/kb/PH5821
Repair Disk http://support.apple.com/kb/ht1782
reset ACLs http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

I just installed Lion and the newest version of Logic express 9 (9.1.5) and every time i playback audio I get this error message: [Disk is too slow or System Overload. (-10010) . Never had any issues before now...

I just installed OSX Lion (10.7.2) and updated to the newest version of Logic express (9.1.5) on a macbook and every time I playback audio I get this error message: [Disk is too slow or System Overload. (-10010) The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time]
Never had any issues before now... any ideas?

Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
You'll have to setup the program again.
cheers
rob

Every time i download something i get this error message "Fireclam Problem"

Every time i download anything i get this problem once the download is completed.
Fireclam Problem
The program executable (null) could not be found.
Make sure that ClamAV/ClamWin is installed properly and check the Fireclam settings
I downloaded the add-on Fireclam, it didn't help.
Please HELP how do i make this error message stop popping up. Thanks :)

Hi, Kmkriel,
I did some research on the add on and all that came up are the crashes for that add on. Please disable the add on and see if the error message continues.
After reading about the add on, it seems that ClamAV/ClamWin needs to be installed in order for the scan to take place before the download.
If this continues when the add on is disabled please do a virus scan. Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Using DW CC... Win 7 : Every time I start DW, I get message telling me to 'switch to" or retry.

Its more of an annoyance than a problem. I'm using Windows 7 Professional on an Intel i7 950 with 16 Gbytes of RAM and a Gforce graphics card with 3072 MBytes of RAM. I'm using the full suite of CC apps.
Every time I start DW I get this error message to "switch to" or retry before it will start. It's got something to do with a browser (I've got 3) but only Chrome has any Adobe related add ons. I recall some time many years ago I got the same message starting Corel Draw or Photo Paint. Come to think of it, that was the reason I moved to Adobe in the first place.
Any help will be gratefully accepted.

Well... Yes and no to fixing it.
I followed that link's instruction — altered for Dreamweaver and yes, it lit up cleanly as administrator but before ever it reached 'booted' stage it warned me I had 00 days of trial left and needed I to register it. OK I'm a paid up renter. I fed it my username and it finished booting only to tell me again, I had 00 days of trial left and needed to register it. I knew where this was leading before ever I entered my email and password for the second time but let it happen anyway.
Then I decided I'd continue with the instructions, log out of DW and re-start it normally. Opps! This application has already been registered on two other machines. CC Manager at it again. Another hour wasted fixing CC dramas. I rebooted the PC without any external drives connected, just the 4 internal drives. OK... Lets start DW and see what happens. I'll tell you firstly that I installed DW on this machine 6 months ago and promptly removed it. Why? Because I get quicker results using notepad++ and I needed to get a job done in a hurry. No time to try and get my head around Dreamweaver in the process.
Honestly speaking I didn't 'cancel' that installation. I didn't realize this antique process still existed. Anyway... I reinstalled it last month with some time now to 'get my head around it'. CC doesn't speak my language and hasn't yet learned that when you tell it to remove a program, it needs to remove the registration of it too! So I got the 00 days trial left garbage again. Only difference this time it told me both the original install and second install (on the same machine) were still registered but luckily (I won't say for who) There was an option to cancel all other installations. and yes... It loaded cleanly and faster than I can recall it ever had previously. Will it keep doing this? Is this mess going to happen ever few months?
I'm prepared to believe CC's shocking uninstall is to blame. At the best of times it is a messy process, leaving registry entries and files scattered all over my drives. NOT very nice for such a complex program manager. I used to be able to keep it under control with Revo but now CC manager wants to do it all I think it needs a bib or diaper to stop messing up my computer. If this happens again now that I've killed (renamed actually) the folders in the instructions to fix lightroom doing the same thing... I'll lodge a critical error ticket.
Incidentally... How come searching for this solution didn't show up the answer you pointed me to? Is the forum search bot flaky too?

Every time my system updates I get system extension error messages.

Every time my system updates I get system extension error messges. It reads that certain extensions could not be loaded/used which seems to be an apple issue. Unfortunately, unless you have apple care there is no way to contact them. I am on LION and my updates are current. Is anyone else having this issue?

A "clicking noise" is often a sign that a hard drive is malfunctioning. Suggest that you power down the device and take it to an Apple store to have them take a look, or contact Customer Service at Apple for instructions.

Every time I start iTunes I get a missing CD/DVD software error.

Installed new CD/DVD burning software and now every time I start iTunes I get a missing CD/DVD software error. I've repaired iTunes twice.

Try removing and reinstalling all the Apple software using:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I recently upgraded to snow leopard and now every time i open iCal i get multiple events to update in iCal

I recently upgraded to snow leopard and now every time i open iCal i get multiple events to update in iCal. Except I don't know where these are coming from or why. I've check iCal preferences and Help - can't find a way to stop this from happening automatically. Any Clues? Also, some of the events are already on my calendar and have been for quite some time.

Greetings,
What do you mean by "events to update"? Do you mean invites to new events or changes to existing invites?
Troubleshooting:
1. Your profile indicates you are running 10.6.7, 10.6.8 is the current version Apple > Software update.
2. First make an iCal backup: Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
3. Launch iCal and test.
Hope that helps!

Every time I launch iTunes I get message "We could not complete your iTunes Store request. An unknown error occurred (4002)." Anyone know what this is?

Hi everyone. Every time I launch iTunes I get a message "We could not complete your iTunes Store request. An unknown error occurred (4002)." Anyone know what this is or what I need to do to stop it? Any suggestions much appreciated.
Geoffrey

Re: An unknown error occurred (4002).
This might solve your problem....

Every time I launch iTunes I get the message: "Do you want the application iTunes.app to accept incoming network connections" Any suggestions?

every time I launch iTunes I get the message: "Do you want the application iTunes.app to accept incoming network connections" Any suggestions?

Just fixed this on my machine, the easiest way to remove this pop-up assuming you are no longer needing that software to print is the following:
Open Finder
Go > Go To Folder...
Type In: "~/Library/Application Support"
Delete All Folders Named Kodak
Open System Preferences
Go to "Security & Privacy"
Click the lock and enter your admin password
Click the Firewall Tab
Go to "Firewall Options..."
Find KodakAiO
Right-click KodakAiOBonjourAgent or equivalent (I forget the exact name)
Click "Show in Finder"
Go Back to a folder and delete the Kodak Folder there.
Remove Kodak from Firewall Options by selecting it and clicking the " - " button the base of the list.
or
Open Finder
Go > Go To Folder...
Type In: "~/Library/Printers"
Delete All Folders Named Kodak
I'm going off memory, so If I forgot something let me know.

Every time I quit Dreamweaver I get a crash report

Every time I quit Dreamweaver I get a crash report. The crash dialogue comes up saying Dreamweaver has unexpectedly quit and asks if I want to report it.
I'm on a Mac using the latest version of Snow Leopard and Dreamweaver CS4.
Any ideas?
--Kenoli

If you can't open Firefox then see:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports

Every time I enable 3G I get 'No Service', why is it doing this?

Similar Messages

Maybe you are looking for