Zoom out images in landscape

When in landscape mode, images (jpg, etc. e.g. from imgur.com) can not be zoomed out enough to fit the entire width of the image into the display. It works fine in portrait mode, the image can be zoomed out to fit completely on screen.

That's annoying, when you pinch to zoom the share options shows up before the image loads.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=1117257]
It could use some more information, however I currently do not have a work around for this. Does this happen on other sites as well?

Similar Messages

Firefox box around zoomed out images issue w/ (xf86-video-intel)

When I zoomout on a page firefox displays a insetted box around my images.
Most notably in my webmail client, however it happens even on the forums if I zoomout.
Regualar zoom: http://world.pyther.net/files/Firefox/regular_zoom.png (The way it should look)
Zoomed Out: http://world.pyther.net/files/Firefox/zoom_out.png (Inset boxes around images)
This happens with both the offical arch build of firefox and the spookyet build. I have no idea how to fix this, it is very annoying!
Any help would be great!
EDIT:
After doing some more research I have narrowed this down to being an issue with xf86-video-intel. The problem does not happen if I use the xf86-video-vesa driver. I have filed a bug report at https://bugzilla.mozilla.org/show_bug.cgi?id=468366
Last edited by pyther (2008-12-07 21:37:12)

Bug reported, anyone thing I need to add anything else?
https://bugzilla.mozilla.org/show_bug.cgi?id=414928

Help Needed in Zooming and Zooming Out Images in flex

Hi
I am using <mx:Zoom /> component to zoom an image!
I am able to zoom and Zoom out the Images but when I zoomIn the Image is cropping!
Can any one give me the link or code for best zoomin and zoomOut for Images?
Is there any way that I can Zoom Video in flex?
Thanks n Regards
Aruna

Probably the simplest solution is to use password-based encryption (PBE). See http://java.sun.com/j2se/1.5.0/docs/guide/security/CryptoSpec.html#PBEEx
for an example.

Why is "zoomed out" image low quality?

It seems whenever the display zoom is less than 100%, CS3 uses some kind of "Pixel Resize" for display which makes for low quality output to look at.
Is there any way to tell CS3 to a simple bilinear filter when displaying less than 100%?
This would make for much less artifacts/jaggedness and I'm sure the speed impact would not even be noticeable.
Thank you,
LTG
[link deleted by forum host]

>Should a pixel editor, at a non-100% zoom level, smooth things over to make them look good, so you might pass on viewing at 100%, falsely thinking the image is fine?
again, what if you want an overall view of your image, not just a 2"x4" secion of it? shouldn't you have that option via a toggle?
>Or should it use something similar to pixels from the image that might clue you in to a need to zoom to 100% to see if editing is needed? I vote for the latter, which Photoshop delivers.
it uses NOTHING similar to the image! it's nearest neighbor guesses are way off. I'd rather see the title bar go red as an indicator and see a closer representation of what the image is supposed to look like.
so that's 3 excuses now. 1) it's so you know what to go back and edit. no. becuase ANYTHING VIEWED AT A NON-100% ZOOM LEVEL IS INACURATE! 2) it's to protect you from saving when the image isn't really ready to be saved? no. becuase ANYTHING VIEWED AT A NON-100% ZOOM LEVEL IS INACURATE! 3) it should show you crap because then you know you need to go back and look at 100%. NO! because maybe you produced crap to begin with! :)
I hear what you're saying mike, and it's the closest to a reasonable explination in this thread, but wouldn't it be nice to allow the USER to choose what they see?

Zooming Out- Panning to Centre Problem

Is there a way to zoom out without being panned towards the centre? I'm working on the corner of an image and occasionally zoom out to see it in context but the view flies towards the centre so I have to pan back again.

Yeah that's hard to do and frustrating in photoshop elements.
(in the full version of photoshop it's much easier by using the bird's eye view)
It depends on how big you want to see the image when zoomed out but the navigator might do.
(Window>Navigator)
Or you could create a new view of your image (Window>Images>New Window) and either have it stay on top by making your zoomed in image a tab and the new window a floating document
or switch to the zoomed out image and back using Ctrl+Tab.
Whatever you do to one image will show on the other.
In case none of the above works in your version, what version of elements and operating system?

Photoshop CC distorted image when zoomed out. Text, edges and Straight lines.

I get this distorted image when working on a file. When I zoom in its fine. But as soon as I zoom out all the lines, text , and edges start to become distorted. I've checked that all my drivers are up to date. I've re installed photoshop and still the same thing. Any Suggestions. ( files look fine when saved or exported, this just happens while Im working )

That looks like a Moiré pattern. Did you scan the image?
If not, can you tell us what operating system?
And is your video card driver fully up to date from the maker's website?

Adobe Reader: No zoom out in landscape mode...

I have a drawing/plan for a buiding in A3 size, pdf format. When I open the file in landscape orientation. The page fills up the width of the screen and I need go scroll to see the full drawing. I can zoom in, but not zoom out. Meanwhile, in portrait orientation, both zoom in and out work. Is it a bug or am I doing something wrong?

I have a drawing/plan for a buiding in A3 size, pdf format. When I open the file in landscape orientation. The page fills up the width of the screen and I need go scroll to see the full drawing. I can zoom in, but not zoom out. Meanwhile, in portrait orientation, both zoom in and out work. Is it a bug or am I doing something wrong?

Problem in getting the image coordinates when i zoom in or zoom out

Hi,
i have doubts with scaling (Zoom in and Zoom out) using following code but when i zoom in want to get the x and y coordinates but im getting resized coordinates , pls do the needful
public class TiffTest extends JFrame implements MouseListener
public TiffTest(String filename)
RenderedImage source= JAI.create("fileload",filename);
SubsampleBinaryToGrayDescriptor sb=new SubsampleBinaryToGrayDescriptor();
RenderingHints rh=new RenderingHints(RenderingHints.KEY_ANTIALIASING,RenderingHints.VALUE_ANTIALIAS_DEFAULT);
RenderedOp op=sb.create(source,new Float(0.5),new Float(0.5),rh);
JScrollPane scrollPane = new JScrollPane();
displayjai dj=new displayjai(op);
scrollPane.setViewportView(dj);
getContentPane().add(scrollPane,BorderLayout.CENTER);
int screen_width=(int)this.getToolkit().getScreenSize().getWidth();
int screen_height=(int)this.getToolkit().getScreenSize().getHeight();
setVisible(true);
setSize(screen_width,screen_height);
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setExtendedState(JFrame.MAXIMIZED_BOTH);
dj.addMouseListener(this);
JAI.create("filestore",dj.ima,"god.tif","TIFF");
public static void main(String s[])
new TiffTest("1_org.tif");
public void mouseClicked(MouseEvent e){System.out.println(e.getX()+","+e.getY());}
public void mousePressed(MouseEvent e){}
public void mouseReleased(MouseEvent e){}
public void mouseEntered(MouseEvent e){}
public void mouseExited(MouseEvent e){}
class displayjai extends DisplayJAI
RenderedOp ima;
public displayjai(RenderedOp inputImage)
super(inputImage);
ima=inputImage;
setPreferredSize(new Dimension(ima.getWidth(),ima.getHeight()));
System.out.println(inputImage.getWidth()+","+inputImage.getHeight());
Thankx
Kannan

hi all,
I am getting the image from the server.but the problem is i am getting the Exception as ArrayOutOfBound exception.
It was displaying the Image for the first time.and when ever it was going for the second time in to the paint method it was displaying the IOException in reading the stream from the connection.
can anybody give me the solution in rectifying that exception.
thanks in advance
lakshman

How to smooth out zooming/scrolling image that jerks (CS4)?

Hi guys/girls,
Is there any way that i can smooth out images that zoom in/out with normal classic tween. they are so jittery it looks terrible. I even have a little bit of easing and frames per second set to 30.
any info much appreciated!
Jeff

Hi flashfever,
thanks for responding. can you elaborate on how i can use that? is it AS for the 1st frame or on the movie clip itself? etc
in this case, i have the image fading in and enlarging from 70% to 100% in the same tween. its very jerky.
thanks for your help so far!
Jeff

Zooming in and then zooming out in AS2 (Without scaling the image)

Basically I want to know if there is a way to go from a zoomed in version of something, and then seeing the whole image in another frame. (By pressing a button)
Let's say there's a tree, I would bascially like (upon pressing a button which I can do) to zoom out and see the whole scenery. Is there a way I can do this without actually changing the size of the image?

There are various components already made on the internet such as v-cam, you can basically control the stage/view, scaling the v-cam keeps the objects on the stage the same, but scales the camera.
Check this out, it has links to both an as2 and an as3 version.http://www.fluidanims.com/FAelite/phpBB3/viewtopic.php?f=43&t=3369

Zoom in and zoom out a image in a java applet

hello, i don't find any example of code of a java applet that zoom in and zoom out an image in jpeg format...
can you help me?
thanks

Crosspost (and other thread has started some answers):
http://forum.java.sun.com/thread.jspa?threadID=624295

How can I scroll around an image if its zoomed out?

Hey guys, quick one for you.
I have no problem using the hand tool/spacebar to scroll around an image when zoomed into it, but as soon as I can see the whole thing I can't scroll around anymore and its just locked to the center
I am a After Effects user so I find this a bit annoying that I can't do this, so I figure there MUST be a setting somewhere I could change to enable it.
Thanks!

by Buko wrote:
Sorry but "How can I scroll around an image if its zoomed out?" has got to be one of the stupidest question I've heard on this forum in some time. Brandon really needs to think before posting.
I've noticed your usual vitriol toward people having simple questions has ramped up about 200% since the advent of Jive, Buko. Maybe you need to disengage, or neck some holy fermented blue agave juice and take a nap?
I see the question as perfectly cromulent, and I use the suggestion I've given quite often. Apparently, a good reason why anyone would want to do that has escaped you, and it's made you even crankier than usual. So you react by giving the gift of vile condescension instead of just ShuttingTFU and letting someone else handle it. (Next time you blast Ramon for the same thing, take a look at your own behavior). And apparently, it's not enough for you to just accept that the way someone else wants to work is different than your workdflow, or is something that never even occurred to you. Maybe some folks just want an answer to their question, and secretly wish you'd shove your bad attitude up your [asterisk-substituted name for your lower-dorsal body opening]. Of course, some folks are just too polite, or they're new visitors here and won't say that to you because they don't know the legacy players and behaviors here. But I'm not either of those things, and I will. Because if you can dish it out, surely you can take it, right? RIGHT!?!?
Now...why do I think the question is worth answering? Sometimes I want to be able to have an entire smallish image visible at 100% magnification in order to view it as it will appear in its final destination. AND I want to do some work on it while keeping all my currently-open Palettes visible; maybe I want to move my image out of the way of a big dialogue box I've called up. (I'm only working on one monitor...sorry if that makes your hardened jaw drop down to your chest).
In Single-Window made mode I'd have to grab and move the whole window, but I can't do that if I have a big dialogue window open. In full screen mode I can scroll around and see all parts of that image at 100% without having to Tab my palettes to their hidden state, or shove my open dialogue nearly off-screen.
Think past your own nose, Dude! And LightenTFUp!

Zoom In-Out Image

Hi all,
I want to apply the Zoom-In Zoom- Out feature on an Image .
Can anyone help me ?.....
Thanks

Are trying SEARCH here?
http://onesearch.sun.com/search/onesearch/index.jsp?qt=resize&subCat=siteforumid%3Ajava76%2Csiteforumid%3Ajava80%2Csiteforumid%3Ajava82&site=dev&dftab=siteforumid%3Ajava76%2Csiteforumid%3Ajava80%2Csiteforumid%3Ajava82&chooseCat=javaall&col=developer-forums
1) From SUN example
    private Image resize(Image image, int width, int height) {
        int sourceWidth = image.getWidth();
        int sourceHeight = image.getHeight();
        Image thumb = Image.createImage(width, height);
        Graphics g = thumb.getGraphics();
        for (int y = 0; y < height; y++) {
            for (int x = 0; x < width; x++) {
                g.setClip(x, y, 1, 1);
                int deltaX = x * sourceWidth / width;
                int deltaY = y * sourceHeight / height;
                g.drawImage(image, x - deltaX, y - deltaY, Graphics.LEFT | Graphics.TOP);
        Image immutableThumb = Image.createImage(thumb);
        return immutableThumb;
    }2: From this forum
private int[] reescalaArray(int[] ini, int x, int y, int x2, int y2) {
   int out[] = new int[x2*y2];
   for (int yy = 0; yy < y2; yy++) {
     int dy = yy * y / y2;
     for (int xx = 0; xx < x2; xx++) {
       int dx = xx * x / x2;
       out[(x2*yy)+xx]=ini[(x*dy)+dx];         }       }
   return out;}
private Image getSmall(Image temp, int newX, int newY) throws Exception{
   //Need an array (for RGB, with the size of original image)
   int tX = temp.getWidth();
   int tY = temp.getHeight();
   int rgb[] = new int[tX*tY];//Get the RGB array of image into "rgb"
    temp.getRGB(rgb,0,tX,0,0,tX,tY);//Call to our function and obtain RGB2
    int rgb2[] = reescalaArray(rgb,tX,tY,newX,newY);//Create an image with that RGB array
    rgb = null;
    Image temp2 = Image.createRGBImage(rgb2,newX,newY,true);
    rgb2 = null;
    return temp2;
}

The images and words are magnified and I am unable to use the phone. I cannot zoom out either. Please advise. Thanks.

On my iphone 4S, the images are all magnified and I am unable to zoom the images out and use the phone. Any suggestion to prevent this from happening and correcting this?

Double tap on the screen using three fingers to get back to normal.
Turn on/off accessibility features using iPhone: Go to Settings > General > Accessibility.
Zoom in or out
Double-tap the screen with three fingers. By default, the screen is magnified 200 percent. If you manually change the magnification (by using the tap-and-drag gesture, described below), iPhone automatically returns to that magnification when you zoom in by double-tapping with three fingers.
Message was edited by: Ingo2711

Continuous forest line speeds and zooms out or view NOT, but should?

Here is my simple problem which I can not resolve.
I will try to make as a detailed description as possible as I can not figure out which step needs to be corrected.
I would like to create a landscape view as seen by someone on a sleigh ride down the hill.
It starts with a winter forest extreme close up then trees start to move to the left ever so slightly, then speed up down hill and then decelerate and zoom out into a thin line on the horizon while slowing down but still moving to the left of the screen.
The way I decided to create this scene:
I created a nice multi layered file in Illustrator with all the trees overlapping each other. The file is to the maximum artboard width allowed by Illustrator.
I imported this multi layered Illustrator file into After Effects as a Comp with separate layers.
I assigned slight movement in the layers from right to left at various speeds. It gives a dimension to the view as you see one line of trees passing behind another at slightly different speed. This step does not seem to create any problems.
I kept on building the continuous line of trees extending to the right by duplicating imported Illustrator layers until I reached the limit of After Effects Comp canvas size. I believe it was at either 30000 or 60000 pxls. The reason why I need trees so large is because at the beginning of the animation we see them at an extreme close up with all the leaves and branches visible. Then the forest line starts to move to the left and speeds up.
Eventually it speeds up and zooms out at the same time enough to reach its end on the right. By this time the trees are at 50% of the screen size. So I import my tree layers again and match them perfectly at the seam and assign speed and scale so it continues to move past the viewer to the left and zooms out into perspective.
And now everything goes wrong. I perfectly match the points of original tree line and the additional tree line. I see they nicely touch each other in the beginning of the movement and at the end.
However unexpectedly in the middle they start to overlap each other and move slightly faster. For example: Left end of second forest line touches the right end of first forest line at the beginning at 10 sec and touches it the same at the end at 20 sec. However at 15 sec it speeds up and jumps ahead the right end of the first forest line. I tried to fix it by making a key frame at 15 sec and aligning them again. It resulted it two smaller jumps at 12.5sec and 17.5sec. If I keep on keying between the frames the left end of the second forest line continues to make little jumps in between. If I try to adjust the zoom out part it again messes everything up. I did set up my anchor point to the left side of layer.
I thought the problem is with Scale, so I made layer 3D and started to reduce a Z dimension but got the same result. The layers jump on each other and it does not seem as one continuous movement.
POTENTIAL PROBLEM: I did assign Easy Ease, Ease In an Ease Out, so my acceleration and deceleration have nice and smooth motion. However I tried to match the speed and velocity in Key Frame options window (double click Alt on PC opens this dialog window) between the original and the additional forest lines.
I can not make this forest line long enough in a static window as I reached the width limitation of After Efffects canvas size. I need it very large as it starts at extreme close up and then zooms out to a and extreme horizon.
I can not make it a moving line and keep on patching it up as movement does not match and lines start to speed up between the key frames and overlap each other.
I though the problem was the combination of side ways right to left movement and zooming out motion (which I tried both ways: Scale in 2D layer and Z Dimension in 3D Layer) but I can not match even the linear speed of the forest lines from right to left. Perhaps there is a problem with how I am trying to match it.
I will even rebuild the entire project if someone can list steps how to make one continuous line of patched up elements in sync, so they seem as one continuous image line.

Hard to really grasp the situation without a few screen grabs, but some general thoughts:
If all your elements are vector art from Illustrator, scale shouldn't be a factor. Set your Illustrator layers to Continuously Rasterize, and you can move as close as you like to the layers with the camera and they will still be sharp. Thus, you can work at an overall smaller scale, and not go beyond AE's 30000 pixel limitation. Which also means you won't need to frame-match two environments.
It sounds to me like you are overcomplicating the job. Personally, I wouldn't combine camera movements and zooms - the potential that varied focal lengths will upset something is too great. I'd just do everything with camera movement, using the X axis for left-right movement, and the Z axis to move closer or further toward your subjects. After Effects cameras mimic the way real world cameras work, so it's best to approach the job like a real world situation. Build the world, then animate the camera moving within that world.
Remember that you can use Precomposed/Nested compositions to greatly streamline your work. Make a clump of 10 or so trees in one comp, then use that pre comp nested multiple times within your main comp. Don't forget to collapse transformations of the pre comps.

Zoom out images in landscape

Similar Messages

Maybe you are looking for