EX13 Server Component State for 'proxy' inactive
Hi All,
I've just ran a Get-ServerComponentState and its showing that all the 'proxy' components are Inactive, I have tried the Set-ServerComponentState but this doesn't help. Has anyone had this before by any chance or know a way to activate them?
Thanks,
R182
I haven't done so intentionally, how do I check this or revert the changes back so they're active again as I think this is causing connection issues.
Thanks!
R182
Run this:
$MM = Get-ServerComponentState -id EX13 -Component ServerWideOffline
$MM.localstates
...to check what requester that put the components in a Inactive state.
During an upgrade or Exchange security patch install - Exchange itself use the requester
Functional and if you see that in the output you get running the above, run:
Set-ServerComponentState -id SERVERNAME -Component ServerWideOffline -state Active -Requester Functional
For more information, See:Server Component States in Exchange 2013
http://blogs.technet.com/b/exchange/archive/2013/09/26/server-component-states-in-exchange-2013.aspx
Martina Miskovic
Similar Messages
-
Server Component Services (for osoft)
BPC 5.1 SP3
Regarding the component services on the BPC server...
The OSoftDMserver service is consuming over 800MB of RAM and is not consuming CPU. We do have a package running, but this service is not consuming CPU. However, the EverestUpdate component service is consuming CPU (~15%) and over 600MB RAM.
Can anyone shed some light on what these services do and if this is expected behavior? Is there any documentation on the osoft component services? What is the EverestUpdate service, and why are there two of them registered and running? We also have two OsoftSystemConfig services registered and running.
Any insight is greatly appreciated!Hi John
You are running a DM package which is executing a logic script.
It seems that your package is executing the logic for a big region and it is possible that logic it can work for a small region but not for a big one.
Usually it is necessary to modify the logic to use XDIM_MAXMEMBERS
to avoid this big allocation of resources.
EvUpdate COM+ is used by BPC logic. You can see clases inside of this component and all are realted to logic.
Regards
Sorin Radulescu -
Convert a SQL Server Update Statement for Oracle
Hi,
i need to convert an update statement written for SQL Server to make it work on Oracle,
the update is the following:
UPDATE TABLE1
SET CDate = TBL2.CDate
FROM TABLE1 TBL1
JOIN TABLE2 TBL2 ON TBL2.Code = TBL1.TBL2Code
JOIN TABLE3 TBL3 ON TBL3.Id = TBL1.Id
WHERE TBL3.TypeCode = '07'
how can i make it compatible with oracle?
thanks!!Billy Verreynne wrote:
Karthick_Arp wrote:
Try this
<snipped>Dislike such an approach that requires multiple hits on the same tables. This is never scalable. A key performance issue is to do only one pass through a data set when possible and not do multiple passes.Yes i understand. But to do a update on a join the table must be a Key Preserved Table. And for a normal Update it is necessory to have an EXISTS clause so that we dont update the non-matching rows to NULL. -
How do I stop server from looking for proxy server at 127.0.0.1?
My system log is getting clogged with continuous attempts by the system to connect with 127.0.0.1, what I believe is a proxy address, with an error message router connection failed, broken pipe.
I'm using a Mac Mini running OS X 10.6 server with a Time Capsule / Airport Extreme base station.
I don't know why this service is running and I'd like to stop it if it's not necessary.
JimMy system log is getting clogged with continuous attempts by the system to connect with 127.0.0.1, what I believe is a proxy address, with an error message router connection failed, broken pipe.
I'm using a Mac Mini running OS X 10.6 server with a Time Capsule / Airport Extreme base station.
I don't know why this service is running and I'd like to stop it if it's not necessary.
Jim -
Proxy error- unable to find software component version for namespace-
Hi all,
I need help regarding proxy.
I am using SAP standard package for one integration PI 7.0 to SRM.
Here we need to use the datatype enhancement for adding some fields. So I create one extension_datatype in the datatype enhancement and add the fields .
( I am using Inbount interface, where I am adding the new fields in PI)
Now when I go to SRM system and Run SPROXY system to regenerate the Proxy. So that It can reload the New fields.
Then it reloads and We activate the same.
Now at one place when I clicked the data type enhancement object its giving the error that unable to find software component version for namespace" . I did not understand why its giving the error. I added the new fields in the existing running datatype enhancement. and reload the reproxy.
I have one more datatype enhancement object in the same software component and in the same name space but its not giving the error.
Please help , how to resolve it asap.
regards
ram1.the datatype enhancement object may not be activated in the same software component .
for this try these -
after creating your data types and designing part. First close all the developement objects windows.
then click on your sw component which you have created and activate it very first.
then you will be able to activate all other objects
or when you start activating your data types a new window with list of the objects which you want to activate opens
in this new window you can see your sw component as the very last object select it first and activate it
2. update the cache in both system
i think these 2 reasons.u try it. -
Using ACE for proxy server load balancing
Hello groups,
I wanted to know your experiences of using ACE for proxy server load balancing.
I want to load balance to a pool of proxy servers. Note: load-balancing should be based on the HTTP URL (i can't use source or dest. ip address) so that
a certain domain always gets "cached/forwarded" to the same proxy server. I don't really want to put matching
criteria in the configuration (such as /a* to S1, /b* to S2, /c* to S3,etc..), but have this hash calculated automatically.
Can the ACE compute its own hash based on the number of "online" proxy servers ? ie. when 4 servers are online, distribute domains between 1,2,3,4 evenly.
Should server 4 fail, recalculate hash so that the load of S4 gets distributed across the other 3 evenly. Also load-balancing domains of S1 ,S2 and S3 should not change if S4 fails.....
regards,
GeertThis is done with the following predictor command:
Scimitar1/Admin# conf t
Enter configuration commands, one per line. End with CNTL/Z.
Scimitar1/Admin(config)# serverfarm Proxy
Scimitar1/Admin(config-sfarm-host)# predictor hash ?
address Configure 'hash address' Predictor algorithms
content Configure 'hash http content' Predictor algorithms
cookie Configure 'hash cookie' Predictor algorithms
header Configure 'hash header' Predictor algorithm
layer4-payload Configure 'hash layer4-payload' Predictor algorithms
url Configure 'hash url' Predictor algorithm
Scimitar1/Admin(config-sfarm-host)# predictor hash url
It does hash the url and the result takes into account the number of active proxies dynamically.
This command has been designed for this kind of scenario that you describe.
Gilles. -
Proxy server keeps asking for authentication
My MacOS10.7.3 server coordinates a small subnet of 100 macs. To access the internet as provided by the larger organisation we must go through a proxy server. Unfortunately the proxy server keeps asking for authentication and checking the Remember This Password barely helps. Any tips would be appreciated.
Hi, the reply by ctzsnooze in the following thread was very helpful to me:
https://discussions.apple.com/message/23848959#23848959 -
API for Proxy Server Connection
Hi,
can anybody tell me any API for Proxy Server Connection in java EXCLUDING
httpclient(apache) and setting system setting and making a urlconnection.hey thanx for replying
Firstly i clear my requirement
I want some other way of connecting to Proxy Server Irrespective of Httpclient and setting system properties and then making url Connection ,these ways are clear to me .
I found one API HTTPClient (not belonging to apache Httpclient) its different
u check this at
http://www.innovation.ch/java/HTTPClient/api/index-all.html#_S_
But the problem is this API Does't support NTLM
i tried to found higher version of this API but i did't get .
API should support :
1. NTML
2.JDK 1.4
3.SOCKS (not necessary)
4.HTTP protocol (other like FTP ... not necessary) -
The license state for the current server doesn't match the farm's license state
I am trying to build a development Server, to mirror our Production Server.
I have copied the Config_Database and WSS_Content from our Production Server to a Development Server that is on a separate network. I installed SharePoint 2010 and ran the Config Wizard, entered in the database server and chose the Config_database that I
copied over previously.
But I receive the error:
"The license state for the current server doesn't match the farm's license state"
Can anyone help me with this.
dfrancisHi,
Please have a look at links below:
https://sharelockpoint.wordpress.com/2014/01/09/sharepoint-2013-installation-error-the-current-server-cannot-be-joined-to-this-farm/
http://blogs.msdn.com/b/sowmyancs/archive/2012/08/08/the-license-state-for-the-current-server-doesn-t-match-the-farm-s-license-state-sharepoint-psconfig-error.aspx
Hope it helps!
Thanks,
Avni Bhatt
If this helped you resolve your issue, please mark it Answered -
Cairngorm 3 - Best practice for component states
Hi,
I have here small question.
I have some component states (eq: application state, some component states, atp.) in my Application.
I'm not sure if is best practise to save component states in Presentation Models, they hold current state only. So, i create ApplicationState class, which holding all possible application states. And here is my problem, i'm not sure, where should be this "State" class stored. In application directory or create another "states" directory name ?
Well, i'm not sure.
Thx.Hi,
I have here small question.
I have some component states (eq: application state, some component states, atp.) in my Application.
I'm not sure if is best practise to save component states in Presentation Models, they hold current state only. So, i create ApplicationState class, which holding all possible application states. And here is my problem, i'm not sure, where should be this "State" class stored. In application directory or create another "states" directory name ?
Well, i'm not sure.
Thx. -
Cannot use browser asking to contact for proxy server
cannot go to any web pages asking to contact you for proxy server
You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]] -
Any best practices for proxy databases
Dear all,
is there any caveat or best practice when using a proxy database?
Is it secure and wise to create them on the master device? Can it grow? Or is it similar to a MSSQL linked server?
Thank You for your patience,
ArthurHello,
This statement is for proxy database as well.
Note: For recovery purposes, Sybase recommends that you do not create other system or user databases or user objects on the master device.
AdaptiveServer Enterprise 15.7 ESD #2 > Configuration Guide for Windows > Adaptive Server Devices and System Databases
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc38421.1572/doc/html/san1335472527967.html?resultof=%22%6d%61%73%74%65%72%22%20%22%64%65%76%69%63%65%22%20%22%64%65%76%69%63%22%20%22%75%73%65%72%22%20%22%64%61%74%61%62%61%73%65%22%20%22%64%61%74%61%62%61%73%22%20
The Component Integration Services Users Guide is very good start in some part it is like a link server but the option are many and it all depends on your use case and remote source.
Niclas -
SCOM 2012 R2 Report Server component install to SQL 2012 Sp1 error?
Hi All
Im having issues installing SCOM 2012 R2 Report Server component to a SQL 2012 Sp1 Server (which is a Windows 2012 R2 Standard server). Im trying to install to the SQL Default server instance, note that the server also has a named instance
which hosts the SCOM databases. SQL Reporting Services is up and running fine (can access the web urls etc). Im also using the SCOM install account wich has full SQL and SCOM Server admin rights for the install. Ive checked that the Firewall
is off locally on the SQL Server, Ive also checked that the existing SCOM components are all in a Healthy state in the SCOM console.
The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
Configurations document for further information.
Ive attempted the install on a standalone SQL Server away from the SQL Server hosting the SCOM databases, but encounter the same error. The full SCOM MSI Installer log details are below, line that appears most relevant is below but unsure why
this would be the case (same account that I used for SQL install etc). Any help much appreciated! : )
Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:51:46]: Debug: :CheckPrerequisites: IsComputerNameValidTitle: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and AvicodeAgentInstalled-x86: 0CheckPrerequisites: Logic Type:and AvicodeAgentInstalled-x64: 0]]>
[11:51:46]: Debug: :
[11:51:46]: Debug: :CheckPrerequisites: AVIcodeAgentCheck: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Always: :CheckPrerequisites: Return Value 0
[11:51:46]: Always: :Entering Page: AdditionalPrerequisitesPage
[11:51:48]: Always: :Entering Page: ShortEulaPage
[11:51:48]: Always: :Displaying localized EULA for localization: en
[11:51:48]: Always: :Displaying Eula: C:\Users\opsmgr\AppData\Local\SCOM\Setup\en\eula_en_notice.rtf
[11:51:49]: Info: :Info:User has agreed to EULA.
[11:51:50]: Always: :Entering Page: SelectManagementServerForReporting
[11:52:08]: Info: :Info:Management Server matches the current version of setup.
[11:52:08]: Always: :Entering Page: SelectReportingInstance
[11:52:08]: Always: :SQL Server SRS Instance (escaped name) RS_MSSQLSERVER
[11:52:08]: Info: :Attempting to get the SSRS version from:
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER:__NAMESPACE
[11:52:08]: Debug: :Path is
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER\V11:MSReportServer_Instance
[11:52:08]: Always: :SRS instance on WDC-SYSSQL01. Version 11.0.3000.0.
[11:52:08]: Always: :No SRS instances on WDC-SYSSQL01.
[11:52:08]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:08]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:08]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:08]: Error: :StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result)
at System.Version.Parse(String input)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:11]: Info: :Attempting to check SRS version
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:11]: Error: :StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result)
at System.Version.Parse(String input)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:28]: Info: :The user canceled setup
[11:52:28]: Always: :Begin: Property bag dump.
[11:52:28]: Always: :SetupStartTime = 26/03/2014 11:51:38
[11:52:28]: Always: :Collection ProtectedProperties (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = ActionAccountPassword
[11:52:28]: Always: : [1] = DASAccountPassword
[11:52:28]: Always: :DefaultLogName = C:\Users\opsmgr\AppData\Local\SCOM\Logs\OpsMgrSetupWizard.log
[11:52:28]: Always: :DefaultLogPath = C:\Users\opsmgr\AppData\Local\SCOM\Logs
[11:52:28]: Always: :path = F:\Setup\AMD64\
[11:52:28]: Always: :setupexepath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :ArchitectureIs64Check = True
[11:52:28]: Always: :OperationManagerAgentInstalled = 1
[11:52:28]: Always: :Collection ListOfSupportedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMCONSOLE
[11:52:28]: Always: : [1] = OMSERVER
[11:52:28]: Always: : [2] = OMWEBCONSOLE
[11:52:28]: Always: : [3] = OMREPORTING
[11:52:28]: Always: :install = 1
[11:52:28]: Always: :installpath = C:\Program Files\Microsoft System Center 2012 R2\Operations Manager
[11:52:28]: Always: :EulaFilesPath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :HealthServiceTypeId = AB4C891F-3359-3FB6-0704-075FBFE36710
[11:52:28]: Always: :hsPort = C51B7833-DA54-1653-D8FD-1A738EF8DED5
[11:52:28]: Always: :ServerBlockReason = A Operations Manager agent was found on this computer. Please remove the agent and then run Setup again.
[11:52:28]: Always: :ScreensLoaded = 1
[11:52:28]: Always: :Collection ListOfSelectedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMREPORTING
[11:52:28]: Always: :OMREPORTING = 1
[11:52:28]: Always: :SelectDatabaseInstanceReloadScreenInformation = 1
[11:52:28]: Always: :ReloadPrerequisitesPageChoice = PrerequisitesProgressPage
[11:52:28]: Always: :LoadedPrerequisiteXmlFile = True
[11:52:28]: Always: :PrerequisitesCheckXMLLoaded = True
[11:52:28]: Always: :CountFilteredPrerequisites_Failed = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Warning = 0
[11:52:28]: Always: :CountFilteredPrerequisites_PassedWithChoices = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Passed = 10
[11:52:28]: Always: :PrerequisiteState = Passed
[11:52:28]: Always: :XmlFilteredPrerequisites_Passed : Begin XML property
[11:52:28]: Always: :<?xml version="1.0" encoding="utf-8"?><Root><Title TitleText="OMREPORTING"><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="memoryCheckTitle" descriptionBody="" descriptionTitle="ReportingMemCheckPassed" resolution="ReportingMemCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ntfsCheckTitle" descriptionBody="" descriptionTitle="ntfsCheckPassed" resolution="ntfsCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="DriveSpaceCheckTitle" descriptionBody="" descriptionTitle="ServerDriveSpaceCheckPassed" resolution="ServerDriveSpaceCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="OSVersionCheckTitle" descriptionBody="" descriptionTitle="OSVersionCheckPassed" resolution="OSVersionCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="WindowsInstallerCheckTitle" descriptionBody="" descriptionTitle="WindowsInstallerCheckPassed" resolution="WindowsInstallerCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="RemoteRegistryCheckTitle" descriptionBody="" descriptionTitle="RemoteRegistryCheckPassed" resolution="RemoteRegistryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="PendingRebootCheckTitle" descriptionBody="" descriptionTitle="PendingRebootCheckPassed" resolution="PendingRebootCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ActiveDirectoryCheckTitle" descriptionBody="" descriptionTitle="ActiveDirectoryCheckPassed" resolution="ActiveDirectoryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="IsComputerNameValidTitle" descriptionBody="" descriptionTitle="IsComputerNameValidPassed" resolution="IsComputerNameValidResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="AVIcodeAgentCheck" descriptionBody="" descriptionTitle="AVICodeAgentCheckPassed" resolution="AVICodeAgentCheckResolution" /></Title></Root>
[11:52:28]: Always: :End XML property
[11:52:28]: Always: :ManagementServer = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :DefaultSDKMachine = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :UserCanceledInstall = 1
[11:52:28]: Always: :InstallSuccess = 1
[11:52:28]: Always: :End: Property bag dump.
[11:52:28]: Debug: :CEIP disabled. CEIP data will NOT be sent.
[11:52:28]: Always: :Application Ended: Successful
[11:52:28]: Always: :
[2014-03-26T11:52:28.4724357+00:00]: Always: Trace Session EndedHi,
According to the error message:
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
The issue is SQL report server database related, I would like to suggest you create a new report database for SCOM and then check the reuslt. Please refer to the below links and follow it to set up SCOM 2012 R2:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
In addition, here is thread for your reference also:
http://social.technet.microsoft.com/Forums/en-US/3f883b7f-5a33-49f0-a40d-f3311e68609d/unable-to-connect-to-the-data-access-service-installing-report-server?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li -
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
External library DC vs J2EE Server Component - Library DC
Hi all,
I have been developing where I used jars through the public part of an external library DC and it worked fine, but I'm wondering:
What is actually the difference between a external library DC and a J2EE Server Component - Library DC ?
When do i use the external library DC and when do i use the J2EE library DC?
Kind regards,
J.Hello Mark,
I tried what you said in the following scenario:
I created Proxy classes for Enterprise Connector for a BAPI from a backend system.
Those classes where put in a jar. That jar is put in a external library DC with an assembly public part and a compilation public part.
From that i tried two method:
Method 1: i referenced the public parts (assembly and compilation) from external library DC in my web dynpro DC and it worked fine.
Method 2: I referenced the public parts (assembly and compilation) in a J2EE library DC ( for compilation: build time ; for assembly: build time and runtime with strong). In my Web Dynpro DC i referenced the compilation public part from my external library. And in the properties of my web dynpro project i added the reference to my j2ee library (that was also deployed; i can see it in my visual administrator). When running my application, i get the following error:
<i>java.lang.NoClassDefFoundError: com/sap/aii/proxy/framework/core/AbstractProxy -
Loader Info -
ClassLoader name: [gtsc.jnj.com/testapptestwdp] Parent loader name: [Frame ClassLoader] References: common:service:http;service:servlet_jsp service:ejb common:service:iiop;service:naming;service:p4;service:ts service:jmsconnector library:jsse library:servlet common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl library:ejb20 library:j2eeca library:jms library:opensql common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore interface:resourcecontext_api interface:webservices interface:cross interface:ejbserialization sap.com/tcwddispwda sap.com/cafeugpapiwd sap.com/tcwdcorecomp service:webdynpro service:sld library:tcddicddicservices library:com.sap.aii.proxy.framework library:tcgraphicsigs library:tcwdwslib library:com.sap.mw.jco library:com.sap.lcr.api.cimclient library:sapxmltoolkit library:com.sap.aii.util.rb library:cafeugpapi library:com.sap.util.monitor.jarm library:tcddicddicruntime library:com.sap.aii.util.xml library:gtsc.jnj.comjcrauweltestr3proxieslibrary library:com.sap.aii.util.misc library:tccmi Resources: C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\src.zip C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\commons-collections-2.1.1.jar C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\cglib-2.1.3.jar C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\asm-attrs.jar C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\gtsc.jnj.comtestapptestwdp.jar C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\dom4j-1.6.1.jar C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\hibernate3.jar C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\commons-logging-1.0.4.jar C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\asm.jar Loading model: {parent,references,local} -
The error occurred while trying to load "com.jnj.gtsc.im.jcrauwel.proxies.MyR3Proxies_PortType".</i>
Any idea what i'm doing wrong?
Kind regards,
J.
Maybe you are looking for
-
How to check whether Java 3d is using hardware acceleration?
Hi I just started looking into Java3d api. I am going through the tutorial examples. When I run it on Windows with JDK1.4.2, the app runs, but taskmanager shows cpu usage is around 55% of my 3GHz Intel processor. I am sending the following VM paramet
-
Create New Info Block in ECC for CRM Customer Fact Sheet
Hi, we have a requirement to add a new info block in Customer Fact Sheet to display Equipment master from ECC. the info block required somehow is not listed in standard ECC info block. is there any way i can configure the info block in ECC so i can c
-
Why does Premiere keep defaulting to frames instead of timecode?
Everything was fine before - Premiere was using the actual timecode as a default. Lately I think someone else used it and switched something to frames instead, and now every time I open up Premiere, the timeline is using frames again instead of the t
-
Where can we configure the field KOMV- KINAK?
We are having a problem with a specific type of order that is duplicating the total value of the Nota Fiscal ( Brazil ) We debugged the program and identified that is problem is on the value into the field KINAK but we do not know where we can change
-
AS Java (Config Wizard Configuration to Solution Manager)
Hello. While I try to configure "NW:Solution Manager-AS Java(Config Wizard configuration to Solution Manager)" in NWA I receive the following error: Error: Name or password is incorrect (repeat logon) Step: J2EE User: SOLMAN with SID and Client exten