Ex2013 Namespace for DR site

Hi ,
As per the Microsoft article single namespace is sufficient we don't require diffrent namespace for DR site. How it will work if primary site goes down.

As Ed said - if geo -dns implemented ,if primary goes down then DR site will be accessible .Copy the article here.
I think you are referring to new CAS architecture and fewer name space. Via Layer 4 implementation you can achieve some sort of HA because the browser  keeps multiple ip of the same domain and retires to connect to the secondary ip after 20 seconds,
so in case if primary ip does not respond then the browser will try to connect to the 2ndry ip.
This is what you are referring to?
Where Technology Meets Talent

Similar Messages

  • XSLT Mapping: Namespace for prefix 'ns0' has not been declared

    Hello, I am working on a synchronous SOAP call and having some trouble with the response message. The web service has its own namespace and I am trying to convert this to my custom data type in PI. PI wants the message to be in format of having ns0 prefix and namespace like we have defined (http://foo for example).
    I have an XSLT mapping (see below) which works fine with my test response payload (pulled from SXMB_MONI source) on this online XSLT test site:
    http://www.freeformatter.com/xsl-transformer.html
    However when I import this archive to PI and test with operation mapping it always says "Namespace for prefix 'ns0' has not been declared."
    This is very confusing because when I test it online, I see both prefix and namespace declaration perfectly. Is there a way to see the results in the PI test tool? After this XSLT java error it doesn't give me the output even in Trace Level All mode.
    Please advise on this issue or if you know an easier way (such as altering my datatype/message type to match the inbound SOAP message). I tried working with the 3rd party WSDL but the response message types show a different root level node than what PI is receiving so I gave up to make my own matching datatype. I just have to solve this last inbound namespace issue and should be finished.
    FYI I have refreshed all PI caches and activated all objects.
    Thanks for your ideas!
    <xsl:stylesheet version="1.0"
    xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
    xmlns:ns0="http://foo"
      <xsl:output method="xml" indent="yes" omit-xml-declaration="yes"/>
      <xsl:template match="@* | node()">
        <xsl:copy>
          <xsl:apply-templates select="@* | node()"/>
        </xsl:copy>
      </xsl:template>
      <xsl:template match="/*">
        <xsl:element name="ns0:{local-name()}">
          <xsl:apply-templates select="@* | node()" />
        </xsl:element>
      </xsl:template>
      <xsl:template match="/">
        <xsl:element name="{local-name()}">
          <xsl:apply-templates select="@* | node()" />
        </xsl:element>
      </xsl:template>
    </xsl:stylesheet>

    Some additional info, here is an example payload which goes through the XSLT mapping perfectly, but in PI I get the error about missing ns0 declaration.
    XML input:
    <bar xmlns='http://irrelevantnamespace'
    xmlns:soap='http://schemas.xmlsoap.org/soap/envelope/'
    xmlns:xsd='http://www.w3.org/2001/XMLSchema'
    xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'>
    <foo/>
    </bar>
    XSLT mapped output using test tool and XSL above:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:bar xmlns:ns0="http://foo">
       <foo />
    </ns0:bar>

  • Failed to retrieve a schema URI (document namespace) for /userprofiles/emailNotification.usr; please see the following exception for details

    I get this exception (and long stack trace) when attempting to start my weblogic server. I'm running Weblogic 7 with Portal 7 (sp 1). I'm using Oracle 8.1.7. I upgraded this application from weblogic portal 4.0, and never had this problem there. As part of the migration process, I ran the tool to migrate all of the database tables, and I re-synched the EBCC project using version 7 of EBCC. I did a search for this problem and found a few mentions of it that seemed to be related to Oracle's handling of CLOB data. Apparently, there is a patch, but I can't seem to find this patch. I'm also not sure if this is indeed the problem since I didn't have this issue with the older version of weblogic using the same database. Any suggestions?

    If you have a support contract please open a case so we can work through
    this problem.
    Can you run an sqlplus session on your database, execute the commands
    "delete from data_sync_item" and "commit", then resync to see if it will
    get you around the problem. The data_sync_item table will be fully
    populated after you sync. This should get you running.
    Between 4.0 and 7.0 the DefaultRequestPropertySet.req file was reduced
    in size -- the CLOB would be smaller in the data_sync_item table.
    I would recommend using the Version Checker against your installation --
    find it on the dev2dev.bea.com site to see if the upgrade installer work
    ed properly. Also consider running the full installer to avoid possible
    problems that might occur with upgrade installers.
    As a result of that patch you referenced in 4.0 the CLOB handling logic
    was changed in 7.0 -- this is why it is strange you are seeing cleaving
    errors. In 7.0 SP2 to be release next week the data sync and
    persistence code was changed also.
    Are you using the OCI or Thin driver?
    -- Jim
    Rob Goldie wrote:
    Jim Litton <replyto@newsgroup> wrote:
    Rob,
    The CLOB issue was related to wlportal4.0 and should not be a factor
    in
    7.0.
    Could you post the entire stack trace?
    ####<Jan 27, 2003 4:21:47 PM EST> <Warning> <Data Synchronization> <PFIDEV5> <pfeAricept1Server>
    <main> <kernel identity> <> <000000> <Application: gmiAriceptApp; Failed to retrieve
    a schema URI (document namespace) for /request/DefaultRequestPropertySet.req;
    please see the following exception for details.>
    Exception[com.bea.p13n.management.data.doc.DocumentProcessingException: Unable
    to analyze and/or cleave document]
         at com.bea.p13n.management.data.doc.cleaver.CleavingDocumentProcessor.process(CleavingDocumentProcessor.java:94)
         at com.bea.p13n.management.data.repository.internal.DataItemImpl.getSchemaUri(DataItemImpl.java:136)
         at com.bea.p13n.management.data.repository.DataRepositoryFactory.createDataItem(DataRepositoryFactory.java:363)
         at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.createDataItems(JdbcDataSource.java:523)
         at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.refresh(JdbcDataSource.java:442)
         at com.bea.p13n.management.data.repository.persistence.ReadOnlyJdbcPersistenceManager.refresh(ReadOnlyJdbcPersistenceManager.java:107)
         at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.<init>(AbstractDataRepository.java:193)
         at com.bea.p13n.management.data.repository.internal.MasterDataRepository.<init>(MasterDataRepository.java:46)
         at com.bea.p13n.management.data.repository.DataRepositoryFactory.getMasterDataRepository(DataRepositoryFactory.java:255)
         at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl.ejbCreate(PlaceholderServiceImpl.java:191)
         at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl_9p0jz2_Impl.ejbCreate(PlaceholderServiceImpl_9p0jz2_Impl.java:117)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:151)
         at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:188)
         at weblogic.ejb20.manager.StatelessManager.initializePool(StatelessManager.java:380)
         at weblogic.ejb20.deployer.EJBDeployer.initializePools(EJBDeployer.java:1472)
         at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1367)
         at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:864)
         at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:81)
         at weblogic.j2ee.Application.addComponent(Application.java:294)
         at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:164)
         at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
         at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
         at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
         at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:732)
         at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:714)
         at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:417)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
         at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:926)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
         at $Proxy9.updateDeployments(Unknown Source)
         at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:4060)
         at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:2259)
         at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:373)
         at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:235)
         at weblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:61)
         at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:806)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
         at weblogic.Server.main(Server.java:32)
    Caused by: org.xml.sax.SAXException: No message available. Resource not found:
    repository.cleaver.no.xsi.namespace.exception Resource bundle: com/bea/p13n/management/data/datasync
         at com.bea.p13n.management.data.doc.cleaver.DocumentCleaver.mapNamespaces(DocumentCleaver.java:135)
         at com.bea.p13n.management.data.doc.cleaver.DocumentCleaver.startElement(DocumentCleaver.java:235)
         at weblogic.apache.xerces.parsers.SAXParser.startElement(SAXParser.java:1384)
         at weblogic.apache.xerces.validators.common.XMLValidator.callStartElement(XMLValidator.java:1299)
         at weblogic.apache.xerces.framework.XMLDocumentScanner.scanElement(XMLDocumentScanner.java:1821)
         at weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:964)
         at weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:396)
         at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:1119)
         at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:135)
         at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:133)
         at com.bea.p13n.management.data.doc.cleaver.CleavingDocumentProcessor.process(CleavingDocumentProcessor.java:80)
         at com.bea.p13n.management.data.repository.internal.DataItemImpl.getSchemaUri(DataItemImpl.java:136)
         at com.bea.p13n.management.data.repository.DataRepositoryFactory.createDataItem(DataRepositoryFactory.java:363)
         at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.createDataItems(JdbcDataSource.java:523)
         at com.bea.p13n.management.data.repository.persistence.JdbcDataSource.refresh(JdbcDataSource.java:442)
         at com.bea.p13n.management.data.repository.persistence.ReadOnlyJdbcPersistenceManager.refresh(ReadOnlyJdbcPersistenceManager.java:107)
         at com.bea.p13n.management.data.repository.internal.AbstractDataRepository.<init>(AbstractDataRepository.java:193)
         at com.bea.p13n.management.data.repository.internal.MasterDataRepository.<init>(MasterDataRepository.java:46)
         at com.bea.p13n.management.data.repository.DataRepositoryFactory.getMasterDataRepository(DataRepositoryFactory.java:255)
         at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl.ejbCreate(PlaceholderServiceImpl.java:191)
         at com.bea.p13n.placeholder.internal.PlaceholderServiceImpl_9p0jz2_Impl.ejbCreate(PlaceholderServiceImpl_9p0jz2_Impl.java:117)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:151)
         at weblogic.ejb20.pool.Pool.createInitialBeans(Pool.java:188)
         at weblogic.ejb20.manager.StatelessManager.initializePool(StatelessManager.java:380)
         at weblogic.ejb20.deployer.EJBDeployer.initializePools(EJBDeployer.java:1472)
         at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1367)
         at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:864)
         at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:81)
         at weblogic.j2ee.Application.addComponent(Application.java:294)
         at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:164)
         at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:375)
         at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:303)
         at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:256)
         at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:207)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:732)
         at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:714)
         at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:417)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
         at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
         at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:926)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:470)
         at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:198)
         at $Proxy9.updateDeployments(Unknown Source)
         at weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(ServerMBean_CachingStub.java:4060)
         at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:2259)
         at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:373)
         at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:235)
         at weblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:61)
         at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:806)
         at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
         at weblogic.Server.main(Server.java:32)
    Are you using a UTF-8 Oracle database?
    Yes
    If you create a new User Profile in the EBCC and compare it to your
    migrated .usr file do you see differences in the DTD's?
    I recreated a new version of the .usr in the EBCC, and still got the same error.
    I also tried deleting everything from the data-sync-item table and re-synching.
    What does the DocumentManager section of your application-config.xml
    look like?
    <DocumentManager
    ContentCacheName="documentContentCache"
    ContentCaching="true"
    DocumentConnectionPoolName="default"
    MaxCachedContentSize="32768"
    MetadataCacheName="documentMetadataCache"
    MetadataCaching="true"
    Name="default"
    PropertyCase="none"
    UserIdInCacheKey="false"
    />
    What does the document.jar Targets="" parameter look like in config.xml?
    <EJBComponent Name="document" Targets="pfeCluster" URI="document.jar"/>
    -- Jim
    Rob Goldie wrote:
    I get this exception (and long stack trace) when attempting to start
    my weblogic server. I'm running Weblogic 7 with Portal 7 (sp 1). I'm
    using Oracle 8.1.7. I upgraded this application from weblogic portal
    4.0, and never had this problem there. As part of the migration process,
    I ran the tool to migrate all of the database tables, and I re-synched
    the EBCC project using version 7 of EBCC. I did a search for this problem
    and found a few mentions of it that seemed to be related to Oracle's
    handling
    of CLOB data. Apparently, there is a patch, but I can't seem to find
    this patch. I'm also not sure if this is indeed the problem since I
    didn't have this issue with the older version of weblogic using the
    same database. Any suggestions?

  • Namespace for a closed request

    Namespace for a closed request
    Hi - does anyone know how to configure a namespace that will take the customer directly to their closed request (this would be an email they would receive).  I know how to direct them to an authorization or to servicemanager, but I don't know if we can direct them to their closed request.
    Any ideas will be appreciated!
    Thanks - Wendy

    Hi Wendy -
    Here is another namespace that can be used as well:
    USE CASE:
    Provide a hyperlink in an email notification to the customer that resolves to the submitted Requisition vs. the MyServices Module landing page.
    NAMESPACE:
    #Site.URL#myservices/navigate.do?query=requisition&requisitionId=#Service.Requisition.RequisitionID#&query=requisition

  • How do I change the Issurer for each site and what initial entry sets the issuer value?

    Cert Server 4.7; I have many web sites with at least three domains; all accessed through a reverse proxy(s) version 3.4. If I have a site www.cf.com and a site tst.www.cf.com, do they each require a different issurer, namely www.cf.com and tst.www.cf.com or just a common domain name cf.com? If I am using one reverse proxy for two sites - tst.cf.com and dev.cf.com How do I handle the server certificut install?

    Once you have loaded the site into SEO Tool, click the arrow down next to the site name in the left column and then select an HTML file to add the Meta Description to.
    Do this with every HTML files in your website.
    MobileMe is not the best place to publish a website for a number of reasons but you should be OK if you upload your sitemap.xml file to the Web/Sites folder on your iDisk. Upload it using drag and drop. From the Finder Go menu, follow the path iDisk/My iDisk/Web/Sites.
    Info about sitemaps...
    http://www.iwebformusicians.com/SearchEngines/Sitemap.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Create a site utilization report for SharePoint Site with these conditions

    HI,
    How do we create a site utilization report for a SharePoint 2007 site. I want to include the following conditions in the report
    a) The list of users who are accessing the site
    b) The list of users who have not accessed the site ( Can we do some filtration based on some conditions )
    c) When was the last date the user has accessed the site

    Hi Kalpana,
    Sorry for delay in reply. I don't think this can be possible from front end without involving SQL dbo users table. If you found any other alternate please share here.
    You can get site collection / sub site user details via
    SP user manager tool and for last access date - time you can use SharePoint object model. - ref : http://blogs.msdn.com/b/varun_malhotra/archive/2010/05/12/moss-2007-get-last-accessed-date-for-a-site.aspx
    Let us know if this helps
    Regards,
    Pratik Vyas | SharePoint Consultant |
    http://sharepointpratik.blogspot.com
    Posting is provided AS IS with no warranties, and confers no rights
    Please remember to click Mark As Answer if a post solves your problem or
    Vote As Helpful if it was useful.

  • SharePoint 2013: A web analytics report is not available for this site.

    Hello,
    I have SharePoint Server 2013 and the enable usage data collection is enabled.  There is usage logs and data being generated, but SharePoint says there is not data available.
    A web analytics report is not available for this site. Usage processing may be disabled on this server or the usage data forthis site has
    not been processed yet.
    What can I do?
    Thanks,
    Paul
    Paul

    hi,
    Web Analytics is now part of the 2013 Search.
    You can refer the below links, :
    http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
    http://www.collabshow.com/2013/05/23/sharepoint-2013-analytics-a-big-step-backward/
    http://usamawahabkhan.blogspot.com/2013/06/sharepoint-2013-analytics-features-how.html 
    if you wanna use  API, there is a blog,which talk about the same:
    retrieve  Search Analytics Reports
    using SharePoint 2013 API:
    http://radutut.wordpress.com/2013/01/27/how-to-get-search-analytics-reports-programmatically-in-sharepoint-2013/

  • Sharepoint warmup script for https sites

    we want to warm up https site which is based on sharepoint 2010.
    When we run some sample powershells it shows access forbidden error so we are not able to warm up https site.
    Its slow on first load so need some warmup script for https sites.
    sharepointer

    Just ensure that the service account that you use to trigger the Powershell scripts has access to IIS and SharePoint.  Most often, the SharePoint Farm account would be used for scheduling the warm up scripts on the WFE server.
    I trust that answers your question...
    Thanks
    C
    http://www.cjvandyk.com/blog

  • How to provide internet access for a site collection in SharePoint Foundation 2010

    Hi all,
    I am working on SharePoint Foundation 2010. I have to make a site collection available on internet.
    Only one site collection is to be brought on internet rest of the site collections should not be accessible from outside.
    How do I achieve this. Any help is greatly appreciated.
    Thanks in advance.

    Hello,
    As per my knowledge, you have to create new Web Application for your site to publishing it to internet. Since internet settings can be done at web application so create new one and then backup your existing site and restore in new web app.
    You can refer below thread for licensing:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/b63b3643-d0c7-45d2-8372-364fda348ed0/sharepoint-foundation-licensing-on-internetfacing-server?forum=sharepointgeneralprevious
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • I have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

    i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

    i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

  • AP Payment for multiple sites

    Is there a way to pay more than one site for a supplier in the same payment?

    Hello All,
    Any solution for this situation ? We are on R12 and we would like to pay single payment for multiple sites for same supplier. Anyone has any idea how do we go about this ?
    Thanks in Advance
    Dinesh
    Edited by: Dinesh Chauhan on 11-May-2010 01:15

  • Firefox connects to google-analytics for some sites, and then gets stuck, and I can never get onto the site. How do I prevent Firefox from connecting to google-analytics? I use XP with service pak 3 in English

    Firefox connects to google-analytics for some sites,when i click on links in websites or emails and then gets stuck, and I can never get onto the site. Or opens a new bower behind the one i'm usind that's blank i don't even know it's there untill i close the one i'm using. How do I prevent Firefox from connecting to google-analytics? Or opening a blank bowser behind the one i'm using. I use XP with service pak 3 in English
    == This happened ==
    A few times a week
    == a couple months ago

    I got the same issue.
    I go on a website and all the sudden another window pops up with "results.google-analytics.com" or "search.google-analytics.com". It has often ads for other sites for example. black single dating site
    how can I can I stop that from happening again?
    I didn't download or do anything, just visit websites, that I visit on a regular basis.
    OS: Windows XP
    Firefox Version: 3.6.6

  • Can I use a domain for one site and mobile me for a different site?

    Can I use a domain for one site and mobile me for a different site?
    I have two sites, I would like to have up and I would like to do one through a domain and one through mobileme is this possible?

    Yes you can. You can use the CNAME method of forwarding for the first site (the top site in iWeb) and use the MMe URL for your account for the other site: http://web.me.com/YourAccount_Name/SiteName/
    OT

  • The passwords and usernames i have for my sites got erased, how can i get them back or reset them so when i open them they nolonger ask me por that info like gmail

    Firefox deleted all of my saved usernames and passwords for the sites i allowed them, For instance I can no longer click gmail and be at my e-mail and see my email, but i am promoted for password and username.

    ''passwords and usernames i have for my sites got erased''
    Did you have them after updating Firefox, or did you lose your passwords as well. If you lost everything you either created a new profile and are in it, or you accidentally/intentionally cleared your history (see picture link). If you cleared your history, the changes are permanent and they are gone.
    If you cleared your history, except for bookmarks in backups, you will have to try for
    #Data in an older profile, for most people this would only be if one accidentally created a new profile, such as during a Firefox installation.
    #Your own backups
    #Old password, cookies from Internet Explorer
    Use the "Alt" key to temporarily see your toolbars. Use the view menu to display any toolbars that should be displayed, such as the Bookmarks Toolbar.
    Check these:
    *Do you have bookmarks Ctrl+B (Bookmarks sidebar), if you don't see your own bookmarks but you see those from when you first installed Firefox, you are probably in a new profile, using the Profile Manager could bring up another profile.
    *Check your current bookmarkbackups for dates
    :On current profile, you can check dates, and restore/replace current bookmarks from a backup. "Ctrl+Shift+B" to bring up the Library List, then in the "Import and Backup" menu, choose Restore to see what dates are available. This will tell you the last 11 dates you used your current profile in Fx5 (5 days if Fx3). You can restore if your bookmarks are messed up.
    Profile: ''Find out if there are multiple profiles''
    :type in '''about:support''' into the location bar<br>:Click on "Open containing folder"<br>:You are now in your current profile<br>:go up one directory level to "'''Profiles'''", where you can see if you have more than one profile directory<br>:files of interest (check last used/update dates) within profile: places.sqlite file, and within bookmarkbackups folder are .json bookmark backups for dates.
    '''Deleting History/Lost History''' (Tools -> options -> Privacy), make sure you are not clearing in "Settings for Clearing History" anything but cache. The items you have check-marked there will be cleared at end of session if "Clear history when Firefox closes" is check-marked. If under tools you click on "Clear recent history Ctrl+Shift+Del" you should be asked for how much history to delete {1hr, 2hr, 4hr, today, everything} and what to clear in the details drop-down. Make sure when using the location bar you are displaying both "History and Bookmarks" so the AwesomeBar can look for items from both.
    * http://img232.imageshack.us/img232/4928/clearcachew.png
    '''You should be backing your for Firefox profiles''', there is not a lot of data and you should be backing up frequently. The is a lot more data for other applications in you Windows user library and you should be backing up data from there as well.
    When you backup all of your user data to external hard-drive (500GB to 3TB) your Firefox profiles would be included.
    But this is about Firefox. For Firefox a thumb drive would probably suffice to backup one or more profiles.
    '''backing up your Firefox Profiles''' (the following is all on one line)
    xcopy C:\Users\''<username>''\AppData\Roaming\Mozilla\Firefox\Profiles\*.* g:\profiles\*.* /s /d /h /y /c /q
    '''Profile references:'''
    *http://kb.mozillazine.org/Profile
    *http://kb.mozillazine.org/Profile_Manager
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    *http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  • IOS 8 - iCloud Keychain with Multiple Login Accounts for a Site

    I use iCloud Keychain to store multiple login accounts for a single website.
    When using Safari on a Mac, the last login account I used for that site is prepopulated in yellow fields. If I want to change the login account, I clear the field with the login ID and I see a dropdown of all of the login accounts available for that site.
    When using Safari on iOS 7, the last login account I used is prepopulated (just like with the Mac), but if I want to use a different login account, I need to enter enough characters in the login ID field for Safari to know which login account I want to use and then it autofills using that account.
    Now, with iOS 8, all I get is the last login account I used. I can't figure out how to autofill any of my other login accounts for that site.
    I'm pretty sure I'm doing something wrong, but I can't figure it out. Any suggestions would be appreciated.
    Thanks.
    Mike

    Mike:
    Did you ever find a solution for this? I just noticed the same behavior.
    -emde

Maybe you are looking for

  • Sony handycam as webcam ??

    Hi all Thanks for previous advice. I bought a Sony dcr-hc37e and it is excellent and I am well pleased with the way it records the gigs we play. My question is this. Can I use it as a webcam ?? I currently use isight but the quality is relatively poo

  • Problem looping insert query

    I'm working on inserting a recordset up Google Calendar entries into my site database. I have a form set up that allows me to insert new entries into the data table, but when I try to loop the insert query over the Google recordset, I get nothing (no

  • Quiz Questions provide no selectable answers in HTML5 Publish

    I am having issues with quizzing, whereas HTML5 format doesn't allow the user to select answers in quiz slides- I am publishing a Captivate 7 project to two separate LMS' for beta testing purposes. When I publish the project as HTML5 only, the quiz q

  • Element and 3D mode in AE

    I want to know if I create a Comp with 3D object in AE using extruded objects if I can drop it into another comp with 3D object in Element and have them both 3D in the same comp?

  • Error trying to convert .mov to H.264 (mp4) for vimeo upload

    Hi. I have a 25 minute long sequence which is 1920x1080. I already exported a .mov file (49 GB) with out changing any settings and it plays back perfect. I want to upload this to vimeo as high quality as possible. They suggest H.264 (mp4) and a whole