Example of NI's Detailed Module/Board Repair Report

Is an example available of NI's Detailed Module/Board Repair Report.  I am returning an SCXI-1581 module for repair under warranty due to a single channel being >25% out of spec.  A detailed repair report can be purchased from NI for $99.  I need to determine if the detailed repair report contains info from which I can determine why the SCXI-1581 module was out of spec after < 6 months usage.
Solved!
Go to Solution.

Hi ATI -
     I apologize for the broken link.  Here are some pictures of the Detail Repair Report:
Gary P.
Applications Engineer
National Instruments
Visit ni.com/gettingstarted for step-by-step help in setting up your system.

Similar Messages

  • Master-detail module in Web PL/SQL

    Hi, I'm a beginner and I'd like to ask how many tables can I use in order to create a master-detail module. The example I have is only 2 tables which is master table and detail table respectively.
    What should I do if I want to include more than 2 tables in a master-detail module?
    For my case, the module i created is to create customer orders where order, order details, customer, employee and product tables are necessary .
    Thanks.

    This probably belongs over in the Products->DeveloperSuite->Designer forum. But I can start an answer here.
    On any single designer-generated web pl/sql page, you can typically only show two levels: a master and 0->many details. You can also only edit one table per page.
    You'll typically be setting up several module components using "key-based links" between them. It's not that hard, but you'll want to experiment a bit or use some resources. For example, there are a number of useful papers over on the odtug site, www.odtug.com
    -- jim

  • Master Detail module returns to Master page after Detail record saved

    Using Oracle Designer Editor version 10.1.2.0.2 I have generated a Web PL/SQL package
    set up as a Master/Detail where the Master and Detail records appear in separate windows.
    The Master window contains multi-records each with a link to the related Detail records.
    The user clicks on the Detail link and the window that appears will allow the user to insert
    a new Detail record. Once the user clicks the Save button I need the Detail window to disappear
    and the focus returned to the Master records preferably after a new query is performed.
    What are the steps I need to perform to navigate back to the Master page and close the Detail
    page?
    Thanks,
    Mark

    The simple answer is that to do exactly what you want would take some fundamental changes to the way the framework works. The actionInsert procedure does what it does - it saves the changes and redisplays the form. You can do post-generation changes to make it do something else, like return to the Master, but I'd advise against it.
    But if you want a way to return to the Master window, where the user clicks a button or link on the detail form after saving changes, that we can do. Just make a note of the URL that does the initial display of the Master page - probably my_module_name$.startup. Go into the detail module component, and click the User Text tab. Then at Text Location, "Bottom of View Form" (or Top if you want the link there) add for a link:
    htf.anchor('my_module_name$.startup','Return to Master')Or for a button:
    htf.formOpen('my_module_name$.startup','GET')||htf.formsubmit('Return to Master')||htf.formCloseYou may need to set the SECECS preference for this module to "No" to get this to work.
    An alternative to my method is to define an Action Item in the module that does a navigation. I often am linking directly to the View form for a master table, rather than a record list, as you are, and Action Items don't work well for that, but one might work fine for you.

  • ALV Grid Traffic control Example  program implemented with function modules

    Hi Friends,
    Can any one please give me ALV Grid control traffic lights  example program implented using function modules instead of OOP ALV. It is very urgent,
    Thanks in advance,
    Santosh Kumar.

    Hi Santosh ,
    Here is a sampla code for the same
    TYPE-POOLS : SLIS.
    DATA : BEGIN OF IT_1 OCCURS 0 ,
               MATNR TYPE matnr ,
               FLAG TYPE C ,  " added for the traffic control
           END OF IT_1.
    SELECT MATNR INTO TABLE IT_1 " Select Data
    UP TO 10 ROWS
    FROM MARA.
    DATA : CATALOG TYPE SLIS_T_FIELDCAT_ALV ,
           WA_CATALOG TYPE SLIS_FIELDCAT_ALV ,
           LAYOUT TYPE SLIS_LAYOUT_ALV .
    *" create catalog
    WA_CATALOG-FIELDNAME = 'FLAG'.
    WA_CATALOG-TABNAME = 'IT_1'.
    APPEND WA_CATALOG TO CATALOG.
    WA_CATALOG-FIELDNAME = 'MATNR'.
    WA_CATALOG-TABNAME = 'IT_1'.
    APPEND WA_CATALOG TO CATALOG.
    DATA : FLAG_T TYPE I.
    *"assign value to traffic signal
    LOOP AT IT_1.
    FLAG_T = SY-TABIX MOD 2.
    IF FLAG_T = 0.
    IT_1-FLAG = '1'.
    ELSE.
    IT_1-FLAG = '2'.
    ENDIF.
    MODIFY IT_1.
    ENDLOOP.
    *"specify the traffic signal field in the layout
    LAYOUT-LIGHTS_FIELDNAME = 'FLAG'.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    *   I_INTERFACE_CHECK                 = ' '
    *   I_BYPASSING_BUFFER                =
    *   I_BUFFER_ACTIVE                   = ' '
    *   I_CALLBACK_PROGRAM                = ' '
    *   I_CALLBACK_PF_STATUS_SET          = ' '
    *   I_CALLBACK_USER_COMMAND           = ' '
    *   I_CALLBACK_TOP_OF_PAGE            = ' '
    *   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
    *   I_CALLBACK_HTML_END_OF_LIST       = ' '
    *   I_STRUCTURE_NAME                  =
    *   I_BACKGROUND_ID                   = ' '
    *   I_GRID_TITLE                      =
    *   I_GRID_SETTINGS                   =
       IS_LAYOUT                         = LAYOUT
       IT_FIELDCAT                       = CATALOG
    *   IT_EXCLUDING                      =
    *   IT_SPECIAL_GROUPS                 =
    *   IT_SORT                           =
    *   IT_FILTER                         =
    *   IS_SEL_HIDE                       =
    *   I_DEFAULT                         = 'X'
    *   I_SAVE                            = ' '
    *   IS_VARIANT                        =
    *   IT_EVENTS                         =
    *   IT_EVENT_EXIT                     =
    *   IS_PRINT                          =
    *   IS_REPREP_ID                      =
    *   I_SCREEN_START_COLUMN             = 0
    *   I_SCREEN_START_LINE               = 0
    *   I_SCREEN_END_COLUMN               = 0
    *   I_SCREEN_END_LINE                 = 0
    *   IT_ALV_GRAPHICS                   =
    *   IT_ADD_FIELDCAT                   =
    *   IT_HYPERLINK                      =
    *   I_HTML_HEIGHT_TOP                 =
    *   I_HTML_HEIGHT_END                 =
    *   IT_EXCEPT_QINFO                   =
    * IMPORTING
    *   E_EXIT_CAUSED_BY_CALLER           =
    *   ES_EXIT_CAUSED_BY_USER            =
      TABLES
        T_OUTTAB                          = IT_1
    * EXCEPTIONS
    *   PROGRAM_ERROR                     = 1
    *   OTHERS                            = 2
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    so rem all you need to do is add a feild in internal table for the traffic signal , assign values 0 , 1, 2 to it and last specify the name of this feild in the layout.
    Regards
    Arun

  • The detail module has disappeared from my tool panel in Lightroom 5. [was:Wolfshooter]

    The detail module has disappeard from my tool panel in lightroom 5.  How do I get it back?

    Right-click near the name of a visible module and reselect "Develop".

  • Printing options from Detailed scheduling board

    Hi All,
    HAs anyone found a decend method of printing the Resource chart from the Detailed Schedling board so that the printout looks like the interactive view. Currently when I attemt to print the board it comes out in a tiny font which is useless,
    Regards,
    Tony

    Hi Tony
    You can't print the same in one page
    It requires running pages
    You can do so by adjusting the FIT TO PAGE - may be more than 10 pages. It depends on the period of length of your resources
    Once you enter the fit to page, press Ok and then choose Single button on the print layout screen, You can see the content per page there
    I tried with big plotter like the one used for printing Engineering Drawings. it got printed
    Hope this helps
    regards
    Vijay

  • How to modify the ni 9237 example code for 3 9237 modules

    I am wanting to modify the ni 9237 example vi(for only one module) for three 9237 modules.
    I have tried several approaches but it does not seem to work well.
    Your help is greatly appreciated. 

    There are my files. Thanks in anticipation. This code is modified for only 2 ni 9237 modules. I bet it would be a logical extention upon making it work for 2 modules.
    Enoch
    Attachments:
    NI 9237 Getting Started (FPGA).vi ‏148 KB
    NI 9237 Getting Started (Host).vi ‏459 KB
    NI 9237 Getting Started.lvproj ‏46 KB

  • XML Publisher with Service Module - Service Request Reports -- URGENT

    Hi all ... any pointers/help/guidance with the problem listed below would be much appreciated.
    I'm working in the context of the Oracle Service Module & Service Request Reports.
    I'm required to configure the XML Publisher Responsibility seeded functionality with the service module reports.
    Listed below are the two reporting requirements that I'm considering , corresponding to the following seeded XMLP Responsibility seeded components:
    (I'm quoting an extract from the Oracle TeleService Implementation & User Guide here).
    Detailed Report
    Data Definition: Service Request Detail Definition (CS_SR_DETAIL_DEF)
    Corresponding Template: Service Request Detail Report Template (CS_SR_DETAIL_TMP.en)
    Template Description: Includes all of the available service request attributes including charges, the two descriptive flexfields, and extensible attributes.
    Summary Report
    Data Definition: Service Request Summary Definition (CS_SR_SUMMARY_DEF)
    Corresponding Template: Service Request Summary Report Template (CS_SR_SUMMARY_TMP_en)
    Template Description: Includes a subset of the detailed report attributes including the same charges information as the detailed report.
    When I log into the EBS >> XML Publisher Administrator Responsibility >> Service Application ... I find these seeded XMLP components, together with the preview data, downloadable templates & sample output.
    The question is:
    Where (responsibility/application/navigation/etc.) do I find the seeded EBS Service Reports to provide the expected XML input to the seeded XMLP Service Request Data Definitions & Templates????
    Notes ...
    I have found the following two reports, under the Service Application in EBS, set their output type to XML and viewed the output of the submitted request:
    - Service Request Detail Report
    - Service Request Summary Report
    ... but each of these two reports produce XML output of a different data model/structure to that expected by each of the corresponding seeded XMLP data-definitions/templates.
    Additionally, I cannot find any corresponding concurrent program definitions on the system with the same SHORT-NAME/CODE as the seeded XMLP data definitions themselves i.e. CS_SR_DETAIL_DEF and CS_SR_SUMMARY_DEF.
    Are the necessary reports not actually seeded within EBS? Do the seeded XMLP data definitions & templates require development of new Concurrent Programs from scratch to access the database tables and provide the necessary data/input, or am I missing something here??

    I am sure you found a solution to your problem. If not, to give a pointer to this issue, I guess these reports are gererated right from the service request screen and this definition is used there.This report can be generated from several places based on where you are within SR scree.
    Thanks
    Nagamohan

  • Master-detail implemented by two reports

    Does anyone has an example of a master-detail page implemented by two reports? Or can explain to me how to do it?
    When clicking on the row of the master (or a link in the record e.d) the second report should show the details given the id of the master row.
    As an extra the detailtable should refresh in a partial page refresh.
    I know how to get it to work with a full page submit ( column in the master row links to the same page filling a hidden item; detailselect looks at the hidden item)
    but just refreshing the detailtable is something my brain doesn't seems to get.
    It should be simple...
    no?
    (I'm using 4.1 of course)

    Edwin,
    Check out this Patrick Wolf blog:
    [url http://www.inside-oracle-apex.com/resetting-pagination-of-master-detail-report-in-oracle-apex/]Resetting pagination of a Master-Detail Report in Oracle APEX
    Jeff

  • Regrading pra module a online report/batch program upgraded from 4.7 to 6.0

    hi all ,
       i have problem here in pra module i have report rogram /batch program in check input header/detail  and  reversal/copy .  i have make two copys of checkinput line item and onecopy i have reverse  using bdc

    Dear All your customization will be transfrred to SPAU and SPDD after the upgrde the first pain area that you have to see manually that which customization you want to keep and which you want to set back to standard:
    There will be four kinds of things in SPAU and SPDD customization and abap programs
    In Schemas if you have change any standard Schema than be careful try to make the Z copy and Keep the Schema As its is when you will select Via SPAU keep it than Transport request numbers will be start generating do note than as you have to apply them in Quality.
    there are so many other things if you require please tell me your personal email address i will send you small document related to Upgrade of HR
    Regards
    Syed

  • How to fix the height of the details section in crystal reports.

    hi all
    How to fix the height of the details section in crystal reports.

    Thanks for your reply
    i didnt get the clear idea about your answer can you explain it once with example
    why iam asking is when i add a new details section according to you answer maintaining same height of the two details sections and i see the preview the iam getting gap between each record. this is so because one record from details section1 and another empty space from details section2
    like
    Details section A-contains records
    Details section B- no records
    Details section A-contains records
    Details section B-no records
    Then how will i solve my issue
    Thanks in advance

  • How to get Detailed Vendor Payable Aging Report?

    Hi, Experts,
    I was trying to find the Detailed Vendor Payable Aging Report. I went to Financials -> Financial Reports -> Accounting -> Aging -> Vendor Liabilities Aging
    I could not find the detailed information: what invoices are still open.
    Thanks!
    Lorrie

    Dear Lorrie,
    When you are in the Vendor Aging Report Window; please click on the Vendor Row for which you want to see the Open Invoices/Documents.
    You can get the Open Documents details through this.
    Regards,
    Jitin

  • Error in XXL_FULL_API function module for download report to excel

    Hi all,
    I am using XXL_FULL_API function module for download report to excel, In this FM we have to fill a table called sema        = t_gxxlt_s. in this table we have a fields called
    i_sema-col_no  = 19.
      i_sema-col_src = 19.
      i_sema-col_typ = 'STR'.
      i_sema-col_ops = 'DFT'
    here in 'col_typ' if we put STR in excel it will come as a text but i wnat the time field what i have to pass ?
    and for filed 'col_ops' also ??
    Thaks,
    Sridhar

    Hi sridhar joshi,
    Please check this program
    REPORT Excel.
    TABLES:
      sflight.
    * header data................................
    DATA :
      header1 LIKE gxxlt_p-text VALUE 'Suresh',
      header2 LIKE gxxlt_p-text VALUE 'Excel sheet'.
    * Internal table for holding the SFLIGHT data
    DATA BEGIN OF t_sflight OCCURS 0.
            INCLUDE STRUCTURE sflight.
    DATA END   OF t_sflight.
    * Internal table for holding the horizontal key.
    DATA BEGIN OF  t_hkey OCCURS 0.
            INCLUDE STRUCTURE gxxlt_h.
    DATA END   OF t_hkey .
    * Internal table for holding the vertical key.
    DATA BEGIN OF t_vkey OCCURS 0.
            INCLUDE STRUCTURE gxxlt_v.
    DATA END   OF t_vkey .
    * Internal table for holding the online text....
    DATA BEGIN OF t_online OCCURS 0.
            INCLUDE STRUCTURE gxxlt_o.
    DATA END   OF t_online.
    * Internal table to hold print text.............
    DATA BEGIN OF t_print OCCURS 0.
            INCLUDE STRUCTURE gxxlt_p.
    DATA END   OF t_print.
    * Internal table to hold SEMA data..............
    DATA BEGIN OF t_sema OCCURS 0.
            INCLUDE STRUCTURE gxxlt_s.
    DATA END   OF t_sema.
    * Retreiving data from sflight.
    SELECT * FROM sflight
             INTO TABLE t_sflight.
    * Text which will be displayed online is declared here....
    t_online-line_no    = '1'.
    t_online-info_name  = 'Created by'.
    t_online-info_value = 'KODANDARAMI REDDY'.
    APPEND t_online.
    * Text which will be printed out..........................
    t_print-hf     = 'H'.
    t_print-lcr    = 'L'.
    t_print-line_no = '1'.
    t_print-text   = 'This is the header'.
    APPEND t_print.
    t_print-hf     = 'F'.
    t_print-lcr    = 'C'.
    t_print-line_no = '1'.
    t_print-text   = 'This is the footer'.
    APPEND t_print.
    * Defining the vertical key columns.......
    t_vkey-col_no   = '1'.
    t_vkey-col_name = 'MANDT'.
    APPEND t_vkey.
    t_vkey-col_no   = '2'.
    t_vkey-col_name = 'CARRID'.
    APPEND t_vkey.
    t_vkey-col_no   = '3'.
    t_vkey-col_name = 'CONNID'.
    APPEND t_vkey.
    t_vkey-col_no   = '4'.
    t_vkey-col_name = 'FLDATE'.
    APPEND t_vkey.
    * Header text for the data columns................
    t_hkey-row_no = '1'.
    t_hkey-col_no = 1.
    t_hkey-col_name = 'PRICE'.
    APPEND t_hkey.
    t_hkey-col_no = 2.
    t_hkey-col_name = 'CURRENCY'.
    APPEND t_hkey.
    t_hkey-col_no = 3.
    t_hkey-col_name = 'PLANETYPE'.
    APPEND t_hkey.
    t_hkey-col_no = 4.
    t_hkey-col_name = 'SEATSMAX'.
    APPEND t_hkey.
    t_hkey-col_no = 5.
    t_hkey-col_name = 'SEATSOCC'.
    APPEND t_hkey.
    t_hkey-col_no = 6.
    t_hkey-col_name = 'PAYMENTSUM'.
    APPEND t_hkey.
    * populating the SEMA data..........................
    t_sema-col_no  = 1.
    t_sema-col_typ = 'STR'.
    t_sema-col_ops = 'DFT'.
    APPEND t_sema.
    t_sema-col_no = 2.
    APPEND t_sema.
    t_sema-col_no = 3.
    APPEND t_sema.
    t_sema-col_no = 4.
    APPEND t_sema.
    t_sema-col_no = 5.
    APPEND t_sema.
    t_sema-col_no = 6.
    APPEND t_sema.
    t_sema-col_no = 7.
    APPEND t_sema.
    t_sema-col_no = 8.
    APPEND t_sema.
    t_sema-col_no = 9.
    APPEND t_sema.
    t_sema-col_no = 10.
    t_sema-col_typ = 'NUM'.
    t_sema-col_ops = 'ADD'.
    APPEND t_sema.
    CALL FUNCTION 'XXL_FULL_API'
      EXPORTING
    *   DATA_ENDING_AT          = 54
    *   DATA_STARTING_AT        = 5
       filename                = 'TESTFILE'
       header_1                = header1
       header_2                = header2
       no_dialog               = 'X'
       no_start                = ' '
        n_att_cols              = 6
        n_hrz_keys              = 1
        n_vrt_keys              = 4
       sema_type               = 'X'
    *   SO_TITLE                = ' '
      TABLES
        data                    = t_sflight
        hkey                    = t_hkey
        online_text             = t_online
        print_text              = t_print
        sema                    = t_sema
        vkey                    = t_vkey
    EXCEPTIONS
       cancelled_by_user       = 1
       data_too_big            = 2
       dim_mismatch_data       = 3
       dim_mismatch_sema       = 4
       dim_mismatch_vkey       = 5
       error_in_hkey           = 6
       error_in_sema           = 7
       file_open_error         = 8
       file_write_error        = 9
       inv_data_range          = 10
       inv_winsys              = 11
       inv_xxl                 = 12
       OTHERS                  = 13
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    please refer this link
    http://www.thespot4sap.com/Articles/Download_to_excel.asp
    Best regards,
    raam

  • Not able to Access R/3 Tables, Function Modules through Crystal Reports

    Hi Gurus,
    I am working on Crystal Reports 2008 - V12.2.0,  When I am trying to connect SAP R/3 system through the Data  connectivity SAP Table,Cluster or FM, 
    I could see only the very few tables ,  and cannot see all Tables and not any Info sets or Function Modules, 
    But, I can access BW system,  problem facing only with SAP R/3 system,
    Suggest me on this,
    Thanks
    Siva

    Hey here..,,
    There is a limitation to show all Tables, Function Modules in Crystal reports for R/3. To see them,
    In Options:
    You will see Table_Name Like%: Text box, go there and give the starting or ending characters of FM's.
    Eg: Z% or %Z
    Then Click on Ok.
    Now try to connect to R/3 again or Refresh the Connection, it will list out as you opted.
    Hope it should help you.
    Thank You!!

  • How to track personal details changes in the report without using triggers on the database tables

    Hi There,
    I'm having a requirement to track the oracle HRMS Personal details changes in the report not using the triggers.
    ex: if some changes the address of the person, then that changed values should be populated in the report.
    Please find below query:
    If any of the following columns data is updated, the new value should be populated in the report.
    SELECT PAPF.PERSON_ID                                                       PAPF_PERSON_ID
    ,      PAPF.EMPLOYEE_NUMBER                                               EMPLOYEE_NUMBER        
    ,      PAPF.FIRST_NAME                                                            FIRST_NAME   
    ,      PAPF.LAST_NAME                                                            LAST_NAME
    ,      TO_CHAR(PAPF.DATE_OF_BIRTH ,'DD-MON-YYYY')     DATE_OF_BIRTH
    ,      ADDR.ADDRESS_LINE1                                                   ADDRESS_1
    ,      ADDR.ADDRESS_LINE2                                                   ADDRESS_2
    ,      ADDR.ADDRESS_LINE3                                                   ADDRESS_3
    ,      ADDR.TOWN_OR_CITY                                                    TOWN
    ,      ADDR.REGION_1                                                              COUNTY
    ,      ADDR.POSTAL_CODE                                                     POST_CODE
    ,      ADDR.COUNTRY                                                              COUNTRY
    ,      PAY.PAYROLL_NAME                                                     PAYROLL_NAME
    ,      PLN_TYP.NAME                                                              PLAN_TYP
    ,      PLN.NAME                                                                     PRODUCT_NAME
    ,      BOF.NAME                                                                     COVERAGE
    FROM   PER_ALL_PEOPLE_F                                                PAPF
    ,      PER_ALL_ASSIGNMENTS_F                                          PAF
    ,      PER_ADDRESSES                                                        ADDR
    ,      PAY_PAYROLLS_F                                                       PAY
    ,      BEN_PRTT_ENRT_RSLT_F                                                 PEN
    ,      BEN_PL_TYP_F                                                         PLN_TYP
    ,      BEN_PL_F                                                             PLN
    ,      BEN_OIPL_F                                                           BOIPF
    ,      BEN_OPT_F                                                            BOF
    WHERE 1                                     = 1
    AND PAPF.PERSON_ID                          = PAF.PERSON_ID
    AND TRUNC(SYSDATE)                          BETWEEN PAPF.EFFECTIVE_START_DATE AND PAPF.EFFECTIVE_END_DATE
    AND TRUNC(SYSDATE)                          BETWEEN PAF.EFFECTIVE_START_DATE AND PAF.EFFECTIVE_END_DATE
    AND PAPF.PERSON_ID                          = ADDR.PERSON_ID
    AND ADDR.PRIMARY_FLAG                       = 'Y'
    AND ADDR.DATE_TO                            IS NULL
    AND PAF.PAYROLL_ID                          = PAY.PAYROLL_ID(+)
    AND PEN.PERSON_ID                           = PAPF.PERSON_ID
    AND PEN.BUSINESS_GROUP_ID                   = PAPF.BUSINESS_GROUP_ID
    AND TRUNC(SYSDATE)                          BETWEEN TRUNC(PEN.EFFECTIVE_START_DATE) AND TRUNC(PEN.EFFECTIVE_END_DATE)
    AND PEN.PRTT_ENRT_RSLT_STAT_CD              IS NULL
    AND PEN.SSPNDD_FLAG                         = 'N'
    AND ( PEN.ENRT_CVG_THRU_DT                  >= TRUNC(SYSDATE)
    OR    PEN.ENRT_OVRIDN_FLAG                  = 'Y')
    AND EXISTS(SELECT PIL.PER_IN_LER_ID
               FROM   BEN_PER_IN_LER PIL
               WHERE  PIL.PER_IN_LER_ID         = PEN.PER_IN_LER_ID
               AND    PIL.BUSINESS_GROUP_ID     = PEN.BUSINESS_GROUP_ID
               AND    PIL.PER_IN_LER_STAT_CD    NOT IN ('VOIDD','BCKDT'))
    AND PEN.PL_TYP_ID                           = PLN_TYP.PL_TYP_ID  
    AND TRUNC(SYSDATE)                          BETWEEN PLN_TYP.EFFECTIVE_START_DATE AND PLN_TYP.EFFECTIVE_END_DATE  
    AND PLN_TYP.PL_TYP_ID                       = PLN.PL_TYP_ID 
    AND TRUNC(SYSDATE)                          BETWEEN PLN.EFFECTIVE_START_DATE AND PLN.EFFECTIVE_END_DATE
    AND PLN.PL_ID                               = PEN.PL_ID
    AND PEN.OIPL_ID                             = BOIPF.OIPL_ID(+)
    AND TRUNC(SYSDATE)                          BETWEEN NVL(BOIPF.EFFECTIVE_START_DATE,HR_GENERAL.START_OF_TIME) AND NVL(BOIPF.EFFECTIVE_END_DATE,HR_GENERAL.END_OF_TIME)
    AND BOIPF.OPT_ID                            = BOF.OPT_ID(+)
    AND TRUNC(SYSDATE)                          BETWEEN NVL(BOF.EFFECTIVE_START_DATE,HR_GENERAL.START_OF_TIME) AND NVL(BOF.EFFECTIVE_END_DATE,HR_GENERAL.END_OF_TIME)
    AND (:P_SYSDATE)                            BETWEEN TRUNC(PEN.ENRT_CVG_STRT_DT) AND TRUNC(PEN.ENRT_CVG_THRU_DT)
    AND (CASE WHEN :P_PAYROLL_ID IS NULL THEN 'Y' ELSE NVL((SELECT 'Y' FROM DUAL WHERE PAY.PAYROLL_ID  = :P_PAYROLL_ID), 'N') END) = 'Y'
    AND PAPF.LAST_UPDATE_DATE                   = (:P_SYSDATE) ;
    --AND PAPF.LAST_UPDATE_DATE                   BETWEEN to_date(:P_SYSDATE) and (to_date(:p_sysdate) + INTERVAL '31' Day);
    --AND (:P_SYSDATE)                           = PAPF.LAST_UPDATE_DATE ;
    Thanks

    check this -
    Re: Best Event-Based notifications for Sox Complience?

Maybe you are looking for