Excel 2007  send by email

I an having trouble trying to e mail this and then downloading on excel 2007 is this something I can do?

Numbers files are not readable by Excel. They can be mailed, but some email clients require that they be Compressed as .zip files.
You can Export your Numbers document to Excel format and mail the resulting file. Then Save and Close your Numbers file in case you need to do further edits at a later date.
Jerry

Similar Messages

  • How to color data in EXCEL while sending to email?

    Dear Friends,
    I have a doubt.
    I have a internal table IT_MARA.
    I sent  this data via EMAIL to the user by using the Function Module -'SO_NEW_DOCUMENT_ATT_SEND_API1' as EXCEL fortmat.
    My question is How to color this data in EXCEL while i am sending to email?
    Regards
    Moosa

    Hi,
    Try these link
    http://www.saptechies.com/how-to-send-some-abap-data-to-an-excel-sheet-using-ole-automation/
    http://www.sap-img.com/abap/download-to-excel-with-format-border-color-cell-etc.htm
    Regards,
    Manish

  • Adobe Reader & Outlook 2003/2007 send to email

    I have multiple Windows XP users experiencing this problem when trying to send and PDF file through email.
    Adobe-File-send through email.
    Adobe and the email gets locked up with the following error message:
    "Microsoft Office Outlook, The operation failed due to network or other communication problems. Check your connections and try again."
    It seems that if the users send the email within 30 seconds the email sends ok but if the wait past 30 - 60 seconds thats when the above error occurs.
    Microsoft said this an adobe issue and Adobe said they had the fix for Acrobat users to upgrade to version 9 but when I told them I'm using Adobe reader 9 and I have the same problem they told me adobe reader users have to use the forums for support.???
    Has anybody seen this before and have you found a workaround?

    I have been seeing this off and on. It is rarely consistent and I have been waiting to find a PC that could reproduce this. I finally got one and was able to reproduce the issue about a dozen times back to back, often when the message has been open for a couple minutes. I have been using Windows Debug tools to isolate the culprit and capture a dmp file to analyze. In each instance of the problem a hang is produced after clicking OK to the message. This is where I have been starting the capture. In our case all the dumps of outlook.exe show the culprit as being valkyrie.dll, an add-in associated with Symantec Enterprise Vault. After disabling the add-in, the issue could not be reproduced. I am not 100% convinced though. I would like to know if other dumps outside of our environment point to the same culprit.
    To capture a dmp file you will need to install the debugging tools for windows from Microsoft. Once installed, go into the folder where it is installed (C:\Program Files\Debugging Tools for Windows (x86) by default) and run adplus.vbs. Dont worry about the details now, just click OK or Yes to the prompts. You will use adplus from the command line when the issue happens. To do this:
    Create the problem and click OK to the "The operation failed due to network or other communication problems. Check your connections and try again". Outlook should become unresponsive/hung up.
    Open command window (Start>Run and type cmd).
    Navigate to the folder where the debugging tools were installed (cd c:\program files\debugginf tools for windows (x86))
    Create a dmp file by running the following: adplus -hang -pn outlook.exe(-hang will tell adplus that a there is a hung application you wish to dump and -pn specifies the process name)
    A dialog box will indicate that a folder has been created in the windows debugging folder. It will be named something like Hang_Mode__Date_... The date and time will correspond to the date and time of when the dump took place. Go into this folder and verify there is a .dmp file. The name of the file corresponds to the process ID of the process, the process name, and date and time. The file can be fairly large since it consists of a memory dump.
    To analyze this file, open Windbg from the exe or from Start>Programs>Debugging Tools for Windows>WinDbg.
    Go to File>Open Crash Dump and locate the file above.
    Dont worry about all the jiberish you initially see. In the empty line at the bottom run the following command: !analyze -v. While the file is being analyzed, the status message will say BUSY. Dont worry about the "Error: Symbol file could not be found..."
    Look for the FAULTING_MODULE and MODULE_NAME. In our case the culprit this was ntdll and Valkyrie. As mentioned above, Valkyrie.dll is associated with the Symantec Enterprise add-in and this is what we are currently looking at with Symantec.
    This is an example of the dump:
    I would be interested to know what results you have found.

  • Can't send Excel 2007 File via Send To Email Option after Acrobat Install

    Normally, you can send an Excel 2007 file via email to someone by going to the Send option on the Excel file menu and choosing "Email." This will email an actual copy of the Excel 2007 file. However, since installing Adobe Acrobat  9 pro on my computer, this option, as well as the option to send to XPS are gone -- the only email option I have on that menu is to convert the file to a PDF and email it.
    It seems to me that Acrobat should ADD options to menus but not remove any! Does anyone know how I can get those missing options (especially the one to email the actual file itself) back? I've tried Googling up a solution, but to no avail so far.
    Thanks, in advance, for any help!
    Laura

    Thanks for taking the time to respond, Aditya!
    I saw that MS support article when I was trying to solve this issue on my own, but the solutions it proposes won't work for me -- I can't set Outlook as my email client (this is a work computer and we use Lotus Notes) and I can't muck around in the registry (again, this is a work computer). I know I can attach the Excel via the attach command in the email client, but the main thing is I don't understand why Acrobat has removed that option from the Excel menu. Also, it removed the Send to XPS option (which I don't really care about, but it bothers me because it shouldn't be deleting anything)!
    I even tried adding the Email command to the Quick Access Toolbar in Excel -- it let me add the button, but, when I click it, absolutely nothing happens.

  • Sending an Email by taking excel sheet from Application Server.

    Hi.
    I Searched in SDN related 'Sending an Email by taking excel sheet from Application Server'.
    But i didnt get. I got sending mails from local pc.
    Can some bdy provide me sample code how to send mail with an attachment. the attached file should get from Application Server
    Regards,
    Renu

    Hi,
    For writing data to app server from internal table:
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/prog%252bon%252bopen%252bdataset%252binput
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/prog%252bon%252bopen%252bdataset%252boutput
    Checkout this wiki for sending XL in mail attachment:
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/multiple%252battachment%252bon%252be_mail
    Thanks,
    Krishna

  • To send an email with attachment excel sheet

    Hi Friends,
    I am struk up at to send an eamil with Excel sheet.
    I used FM SO_DOCUMENT_SEND_API1.
    but is is sending an email but with out data
    how to work this senario kindly help me please.
    Thanks and Regards,
    Bhavani.

    Hi,
    https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=61243822
    Thanks,
    Krishna...

  • Send Excel as attachment in Email

    Hi,
    I have an excel file attached as the original to a DIR.
    I want to send this excel file as an attachment in the external email.
    I am retrieving the data contents of original file in binary format using CVAPI_DOC_CHECKOUTVIEW
    Then I am converting binary to text using SCMS_BINARY_TO_TEXT
    and then sending the email with the data file as attachment using SO_DOCUMENT_SEND_API1.
    However, this attachment does not open when its type is .xls
    It does open with .txt, but the file is distorted and in non-understanable format.
    Regards,
    Reema

    hi,
    Check this Out...
    REPORT  ZEMAIL_ATTACH                   .
    TABLES: ekko.
    PARAMETERS: p_email   TYPE somlreci1-receiver
                                      DEFAULT '[email protected]'.
    TYPES: BEGIN OF t_ekpo,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
    END OF t_ekpo.
    DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
          wa_ekpo TYPE t_ekpo.
    TYPES: BEGIN OF t_charekpo,
      ebeln(10) TYPE c,
      ebelp(5)  TYPE c,
      aedat(8)  TYPE c,
      matnr(18) TYPE c,
    END OF t_charekpo.
    DATA: wa_charekpo TYPE t_charekpo.
    DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                    WITH HEADER LINE.
    DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                    WITH HEADER LINE.
    DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
            t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
            t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
            w_cnt TYPE i,
            w_sent_all(1) TYPE c,
            w_doc_data LIKE sodocchgi1,
            gd_error    TYPE sy-subrc,
            gd_reciever TYPE sy-subrc.
    *START_OF_SELECTION
    START-OF-SELECTION.
      Retrieve sample data from table ekpo
      PERFORM data_retrieval.
      Populate table with detaisl to be entered into .xls file
      PERFORM build_xls_data_table.
    *END-OF-SELECTION
    END-OF-SELECTION.
    Populate message body text
      perform populate_email_message_body.
    Send file by email as .xls speadsheet
      PERFORM send_file_as_email_attachment
                                   tables it_message
                                          it_attach
                                    using p_email
                                          'Example .xls documnet attachment'
                                          'XLS'
                                          'filename'
                                 changing gd_error
                                          gd_reciever.
      Instructs mail send program for SAPCONNECT to send email(rsconn01)
      PERFORM initiate_mail_execute_program.
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    FORM data_retrieval.
      SELECT ebeln ebelp aedat matnr
       UP TO 10 ROWS
        FROM ekpo
        INTO TABLE it_ekpo.
    ENDFORM.                    " DATA_RETRIEVAL
    *&      Form  BUILD_XLS_DATA_TABLE
          Build data table for .xls document
    FORM build_xls_data_table.
      CONSTANTS: con_cret TYPE x VALUE '0D',  "OK for non Unicode
                 con_tab TYPE x VALUE '09'.   "OK for non Unicode
    *If you have Unicode check active in program attributes thnen you will
    *need to declare constants as follows
    *class cl_abap_char_utilities definition load.
    *constants:
       con_tab  type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
       con_cret type c value cl_abap_char_utilities=>CR_LF.
      CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
             INTO it_attach SEPARATED BY con_tab.
      CONCATENATE con_cret it_attach  INTO it_attach.
      APPEND  it_attach.
      LOOP AT it_ekpo INTO wa_charekpo.
        CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
                    wa_charekpo-aedat wa_charekpo-matnr
               INTO it_attach SEPARATED BY con_tab.
        CONCATENATE con_cret it_attach  INTO it_attach.
        APPEND  it_attach.
      ENDLOOP.
    ENDFORM.                    " BUILD_XLS_DATA_TABLE
    *&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
          Send email
    FORM send_file_as_email_attachment tables pit_message
                                              pit_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription
                                              p_sender_address
                                              p_sender_addres_type
                                     changing p_error
                                              p_reciever.
      DATA: ld_error    TYPE sy-subrc,
            ld_reciever TYPE sy-subrc,
            ld_mtitle LIKE sodocchgi1-obj_descr,
            ld_email LIKE  somlreci1-receiver,
            ld_format TYPE  so_obj_tp ,
            ld_attdescription TYPE  so_obj_nam ,
            ld_attfilename TYPE  so_obj_des ,
            ld_sender_address LIKE  soextreci1-receiver,
            ld_sender_address_type LIKE  soextreci1-adr_typ,
            ld_receiver LIKE  sy-subrc.
      ld_email   = p_email.
      ld_mtitle = p_mtitle.
      ld_format              = p_format.
      ld_attdescription      = p_attdescription.
      ld_attfilename         = p_filename.
      ld_sender_address      = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
    Fill the document data.
      w_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name  = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach INDEX w_cnt.
      w_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = pit_attach[].
    Describe the body of the message
      CLEAR t_packing_list.
      REFRESH t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE it_message LINES t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      APPEND t_packing_list.
    Create attachment notification
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 1.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  ld_attdescription.
      t_packing_list-obj_name   =  ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
    Add the recipients email address
      CLEAR t_receivers.
      REFRESH t_receivers.
      t_receivers-receiver = ld_email.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'.
      t_receivers-notif_ndel = 'X'.
      APPEND t_receivers.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
           EXPORTING
                document_data              = w_doc_data
                put_in_outbox              = 'X'
                sender_address             = ld_sender_address
                sender_address_type        = ld_sender_address_type
                commit_work                = 'X'
           IMPORTING
                sent_to_all                = w_sent_all
           TABLES
                packing_list               = t_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = t_receivers
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                OTHERS                     = 8.
    Populate zerror return code
      ld_error = sy-subrc.
    Populate zreceiver return code
      LOOP AT t_receivers.
        ld_receiver = t_receivers-retrn_code.
      ENDLOOP.
    ENDFORM.
    *&      Form  INITIATE_MAIL_EXECUTE_PROGRAM
          Instructs mail send program for SAPCONNECT to send email.
    FORM initiate_mail_execute_program.
      WAIT UP TO 2 SECONDS.
      SUBMIT rsconn01 WITH mode = 'INT'
                    WITH output = 'X'
                    AND RETURN.
    ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
    *&      Form  POPULATE_EMAIL_MESSAGE_BODY
           Populate message body text
    form populate_email_message_body.
      REFRESH it_message.
      it_message = 'Please find attached a list test ekpo records'.
      APPEND it_message.
    endform.                    " POPULATE_EMAIL_MESSAGE_BODY
    Regards,
    Santosh

  • Sending Excel as attachment in Email (Unicode)

    Hi,
    I'm using SO_NEW_DOCUMENT_ATT_SEND_API1 FM to send excel attachments as emails to external addresses.
    However, this the SAP upgrade to ECC6.0 from R/3 4.6B
    then I cannot open BIG5 char excel, who does know how to sending Unicode excel as attachment in email.
    the Excel can show Chinese , BIG5 code ,Japanese ,Korea .
    OR which new funciton module in ECC6.0 like SO_NEW_DOCUMENT_ATT_SEND_API1 FM .
    Regards,
    Hank

    Hey,
    try this one.
        lv_string = str_data1.
          cl_bcs_convert=>string_to_solix(
            EXPORTING
              iv_string   = lv_string
              iv_codepage = '4103'  "suitable for MS Excel, leave empty
          iv_add_bom  = 'X'     "for other doc types
            IMPORTING
              et_solix  = binary_content
              ev_size   = size ).
        CATCH cx_bcs.
          MESSAGE e445(so).
      ENDTRY.
            send_request = cl_bcs=>create_persistent( ).
    Now  create document object from internal table with text
    document = cl_document_bcs=>create_document(
              i_type    = 'RAW'
              i_text    = main_text
              i_subject = l_var ).     
           document->add_attachment(
              i_attachment_type    = 'xls'                               i_attachment_subject = ' Details'                      i_attachment_size    = size
              i_att_content_hex    = binary_content ).
        add document object to send request
            send_request->set_document( document ).
        --------- add recipient (e-mail address) -----------------------
        create recipient object
            recipient = cl_cam_address_bcs=>create_internet_address( abc at abc.com).
           recipient = cl_cam_address_bcs=>create_internet_address( 'abc at abc.com' ).
        add recipient object to send request
            send_request->add_recipient( recipient ).
            sent_to_all = send_request->send( i_with_error_screen = 'X' ).
            COMMIT WORK.
    This will definitely work .if any doubts aask me.
    Neeraj

  • Excel attachment in external email sending

    Hi guys.
    Just having a bit problem in my excel attachment in external email sending (internet). The contents of my attachment are being considered as one column per line item, which is supposedly divided into columns according to its tab or space.
    example: i sent this :
    PO# Poitem
    A 1
    it will be displayed in excel as:
    column1
    PO# Poitem
    A 1
    it should be like this:
    column1
    column2
    PO#
    Poitem
    A
    1
    can anyone tell me what additional fm(s) do I need to implement before calling fm: SO_NEW_DOCUMENT_ATT_SEND_API1 to send the email.
    thanks a lot!
    cheers,

    jagan,
      Comapare your code with this program.
    I need a create a excel file (or tab delimited file) and send it as attachment by mail to the user (in background processing). I use SO_NEW_DOCUMENT_ATT_SEND_API1. I have a problem, that 1 Excel line is splited into 2 lines in mail, because there is more then 255 chars in Excel line.
    Can anybody help me?
    report y_cr17_mail .
    data method1 like sy-ucomm.
    data g_user like soudnamei1.
    data g_user_data like soudatai1.
    data g_owner like soud-usrnam.
    data g_receipients like soos1 occurs 0 with header line.
    data g_document like sood4 .
    data g_header like sood2.
    data g_folmam like sofm2.
    data g_objcnt like soli occurs 0 with header line.
    data g_objhead like soli occurs 0 with header line.
    data g_objpara  like selc occurs 0 with header line.
    data g_objparb  like soop1 occurs 0 with header line.
    data g_attachments like sood5 occurs 0 with header line.
    data g_references like soxrl occurs 0 with header line.
    data g_authority like sofa-usracc.
    data g_ref_document like sood4.
    data g_new_parent like soodk.
    data: begin of g_files occurs 10 ,
      text(4096) type c,
       end of g_files.
    data : fold_number(12) type c,
           fold_yr(2) type c,
           fold_type(3) type c.
    parameters ws_file(4096) type c default 'c:\debugger.txt'.
    Can me any file fromyour pc ....either xls or word or ppt etc ...
    g_user-sapname = sy-uname.
    call function 'SO_USER_READ_API1'
    exporting
       user                            = g_user
       PREPARE_FOR_FOLDER_ACCESS       = ' '
    importing
       user_data                       = g_user_data
    EXCEPTIONS
       USER_NOT_EXIST                  = 1
       PARAMETER_ERROR                 = 2
       X_ERROR                         = 3
       OTHERS                          = 4
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    fold_type = g_user_data-outboxfol+0(3).
    fold_yr = g_user_data-outboxfol+3(2).
    fold_number =  g_user_data-outboxfol+5(12).
    clear g_files.
    refresh : g_objcnt,
      g_objhead,
      g_objpara,
      g_objparb,
      g_receipients,
      g_attachments,
      g_references,
      g_files.
    method1 = 'SAVE'.
    g_document-foltp  = fold_type.
    g_document-folyr   = fold_yr.
    g_document-folno   = fold_number.
    g_document-objtp   = g_user_data-object_typ.
    *g_document-OBJYR   = '27'.
    *g_document-OBJNO   = '000000002365'.
    *g_document-OBJNAM = 'MESSAGE'.
    g_document-objdes   = 'Manohar testing by program'.
    g_document-folrg   = 'O'.
    *g_document-okcode   = 'CHNG'.
    g_document-objlen = '0'.
    g_document-file_ext = 'TXT'.
    g_header-objdes =  'Manohar testing by program'.
    g_header-file_ext = 'TXT'.
    call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
      exporting
        method             = method1
       office_user        = sy-uname
       ref_document       = g_ref_document
       new_parent         =  g_new_parent
    importing
       authority          =  g_authority
    tables
       objcont            = g_objcnt
       objhead            = g_objhead
       objpara            = g_objpara
       objparb            = g_objparb
       recipients         = g_receipients
       attachments        = g_attachments
       references         = g_references
       files              = g_files
      changing
        document           = g_document
       header_data        = g_header
      FOLMEM_DATA        =
      RECEIVE_DATA       =
    File from the pc to send...
    method1 = 'ATTCREATEFROMPC'.
    g_files-text = ws_file.
    append g_files.
    call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
      exporting
        method             = method1
       office_user        = g_owner
       ref_document       = g_ref_document
       new_parent         =  g_new_parent
    importing
       authority          =  g_authority
    tables
       objcont            = g_objcnt
       objhead            = g_objhead
       objpara            = g_objpara
       objparb            = g_objparb
       recipients         = g_receipients
       attachments        = g_attachments
       references         = g_references
       files              = g_files
      changing
        document           = g_document
       header_data        = g_header
    method1 = 'SEND'.
    g_receipients-recnam = 'MK085'.
    g_receipients-recesc = 'B'.
    g_receipients-sndex = 'X'.
    append  g_receipients.
    call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
      exporting
        method             = method1
       office_user        = g_owner
       ref_document       = g_ref_document
       new_parent         =  g_new_parent
    importing
       authority          =  g_authority
    tables
       objcont            = g_objcnt
       objhead            = g_objhead
       objpara            = g_objpara
       objparb            = g_objparb
       recipients         = g_receipients
       attachments        = g_attachments
       references         = g_references
       files              = g_files
      changing
        document           = g_document
       header_data        = g_header.

  • Excel 2007 Problems while sending E-Mail with Excel Attachment

    Hello all,
    i wrote a small WD application for uploading a file and sending this file
    vie e-mail to some recipients.
    I'm using class "cl_document_bcs". No problem with ".doc", ".pdf", also no problem
    with ".xls" files generated by old Excel version. But when generating an .xls document with
    Excel 2007, the attached file is not readable (just non usable signs).
    For attaching the .xls file i use:
      TRY.
          lr_attachment =  cl_document_bcs=>create_document(
              i_type        = lv_filetype " --> 'XLS'
              i_subject     = 'excel document'
              i_hex         = lt_file_solix
        CATCH cx_document_bcs .
      ENDTRY.
    Are there any restrictions regarding Excel 2007?
    The data element of i_type is just char3, so XLSX
    wouldn't be possible.

    hello Christopher Linke ,
    if you Programatically generation a excel file and you have 2007 version you can use OLE automation to save file as .xls i.e. a 2003 work book ..
    if you have a excel file ready and you just want to send it across the you will have to convert the xlsx to xls and then send it you can do this as well using OLE automation
    (in 2007 in SAVE AS option you can save it excel 97 2003 workbook)
    Edited by: Anup Deshmukh on Mar 3, 2010 3:38 PM

  • Sending an Email with Excel Attachment from Local directory

    Hi,
    I have a requirement : I want to send an email with an attachment which is exist on local  directory and currently I am using
    cl_bcs classes
    Thanks,
    Moderator message: Welcome to SCN!
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
    Edited by: Thomas Zloch on Aug 4, 2011 5:15 PM

    Hi,
    I have a requirement : I want to send an email with an attachment which is exist on local  directory and currently I am using
    cl_bcs classes
    Thanks,
    Moderator message: Welcome to SCN!
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
    Edited by: Thomas Zloch on Aug 4, 2011 5:15 PM

  • How to correct bad PDF display of Excel 2007 graph-Adobe Pro X?

    Just installed Adobe Acrobat Pro X; previously had Adobe Pro 8, which worked fine.  Have Excel 2007 files with an Excel graph and a JPG image on the spreadsheet tab.  Both the graph and the JPG are too big, are displaced, and hide spreadsheet data, when the Excel file is Saved As a PDF using Adobe Pro dialog or Excel dialog, or the Excel Plug-In to Create PDF.  For some strange reason, printing to PDF works, although that is limiting.  All of the settings are the same for the Adobe Printer as Adobe Pro settings.  Changing them or going to default did not help.  Just did the latest update; that did not help.
    The graph and JPG are too large for the PDF page.  Paper printing from Excel still works fine. Producing a PDF on another machine with Pro 8 still works fine.  Could not find this problem discussed anywhere.  Using XP, fully patched.  This should not be a complicated process, nor a complex spreadsheet. What is going on?
    Thanks

    Regardless of the method and Adobe product used to create the PDF, including the Excel tool button, the single common factor whether the PDF correctly displays a JPG or graph in the Excel file that is being done at anything other than 100% size is whether the Adobe Printer or a Physical Printer is selected as the default printer in the Windows Printers and Faxes-Settings.  This is true even though the printer is not being used. I have created the same PDF using every method/product and the results are always the same, and only properly display when either the setting is 100% size or the system printer is selected as Adobe Printer.  This is true only after installing Adobe X (8 was previously installed, and worked as expected).
    Jeffry Calhoun
    Workforce Analytics Manager
    Ohio Department of Job & Family Services
    P.O. Box 1618, Columbus, OH 43216-1618
    InterAgency: F376, 4020 E. 5th Avenue
    614-644-0564
    Fax 614-728-5938
    [email protected]
    OhioMeansJobs.com -
    The next best thing to having an HR department.
    OhioMeansJobs.com -
    Ohio's premier website for connecting businesses and job seekers - quickly, easily, and for free!
    >>> "Bill@VT" <[email protected]> 4/7/2012 7:21 AM >>>
    Re: How to correct bad PDF display of Excel 2007 graph-Adobe Pro X? created by Bill@VT ( http://forums.adobe.com/people/Bill%40VT ) in Creating, Editing & Exporting PDFs - View the full discussion ( http://forums.adobe.com/message/4319297#4319297 )
    You say the settings for the printer work fine, but do not for PDF Maker (I am assuming this is what you meant). PDF Maker no longer uses the printer and the settings are independent. Check the settings for PDF Maker under the create PDF menu.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4319297#4319297
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4319297#4319297. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Creating, Editing & Exporting PDFs by email ( mailto:discussions-community-acrobat-creating__editing_%[email protected] ) or at Adobe Forums ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697 )
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
    Ohio Means Jobs
    You're looking for something unique. Use more than an ordinary site.
    http://www.ohiomeansjobs.com
    This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message.

  • Errors opening Excel 2007 spreadsheets in Excel 2010

    When I try to open spreadsheets created in Excel 2007 with Excel 2010, I get the error:  "Excel found unreadable contenct in 'file name'.  Do you want to recover the contents of this workbook?  If you trust the source of this workbook, click
    Yes".  Then a Repairs dialog box comes up saying:  "Excel completed file level validation and repair. Some parts of this workbook may have been repaired or discarded.    Removed Part: Print options."  File then opens fine. 
    We receive Excel 2007 from various sources.  One of my problem is that we are just starting to migrate people to Windows 7 and Office 2010, with most people still on Office XP.  The file format converter for Excel 2002/2003 does not work with these
    Excel 2007 files.  The other problem is that we have macros that are used to open Excel files and import data into other Excel files.  Pretty hard to modify these macros to allow for some files that are going to pop up this error, and others that
    do not.
    What is causing this problem, and what fix is available?  We have asked that people save the Excel files in Excel 97-03 format before sending to us, with mixed results. 

    Hi,
    Thank you for using Excel IT Pro Discussions forum. 
    Are you using Office 2010 RTM version? If it is trial version or beta version, I suggest upgrading it to the RTM version.
    First, please check if this KB article helps:
    Error message when you try to open a workbook in Excel 2007: "Excel found unreadable content in Book_Name"
    http://support.microsoft.com/kb/929766
    Note: The steps are for Excel 2007. The steps in Excel 2010 are similar.
    If the problem persists, let’s also check the following settings in Excel 2010.
    ========
    1.      
    In Excel 2010, click File > Options > Trust Center > File block settings.
    2.      
    Check the checkboxes before:
    Excel 2007 and later Wordbooks and Templates
    Excel 2007 and later Macro-Enabled Workbooks and Templates
    Excel 2007 and later Add-in Files
    Excel 2007 and later Binary Workbooks
    Then, try to open the Excel 2007 file in Excel 2010 and check the results again.
    Best Regards,
    Sally Tang
    TechNet Subscriber Support
    in forum
    If you have any feedback on our support, please contact
    [email protected]  

  • Autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not visible after converting excel

    Hello, I am having an issue with Autocad 2010 drawings not showing up in a pdf document. Normally, I cut and paste part of an Autocad 2010 drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe Distiller, I convert the Excel spread sheet into a pdf document for propriatary purposes. However, recently the drawing pasted into Excel will not fully appear on the pdf, the drawing is cut off past a certain point. The drawing will print normally in Excel, but in pdf will not print normally. If the drawing is shrunk below the "cut off" point, it appears normally. If the drawing is expanded above the "cut off" point, any additional image is lost. Any suggestions on how to fix the problem would be appreciated.

    See "[Creating, Editing & Exporting PDFs] How to correct bad PDFdisplay
    of Excel 2007 graph-Adobe ProX?" and similar discussions.  Are you
    scaling it to less than 100%?
    Jeffry Calhoun
    Workforce Analytics Manager
    Ohio Department of Job & Family Services
    P.O. Box 1618, Columbus, OH 43216-1618
    InterAgency: F376, 4020 E. 5th Avenue
    614-644-0564
    Fax 614-728-5938
    [email protected]
    OhioMeansJobs.com -
    The next best thing to having an HR department.
    OhioMeansJobs.com -
    Ohio's premier website for connecting businesses and job seekers -
    quickly, easily, and for free!
    >>> jblairdynis <[email protected]> 4/19/2012 10:44 AM >>>
    autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not
    visible after converting excel created by jblairdynis (
    http://forums.adobe.com/people/jblairdynis ) in Creating, Editing &
    Exporting PDFs - View the full discussion (
    http://forums.adobe.com/message/4346704#4346704 )
    Hello, I am having an issue with Autocad 2010 drawings not showing
    up in a pdf document. Normally, I cut and paste part of an Autocad 2010
    drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe
    Distiller, I convert the Excel spread sheet into a pdf document for
    propriatary purposes. However, recently the drawing pasted into Excel
    will not fully appear on the pdf, the drawing is cut off past a certain
    point. The drawing will print normally in Excel, but in pdf will not
    print normally. If the drawing is shrunk below the "cut off" point, it
    appears normally. If the drawing is expanded above the "cut off" point,
    any additional image is lost. Any suggestions on how to fix the problem
    would be appreciated.
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page:
    http://forums.adobe.com/message/4346704#4346704
    To unsubscribe from this thread, please visit the message page at
    http://forums.adobe.com/message/4346704#4346704. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in Creating, Editing & Exporting PDFs by email (
    mailto:discussions-community-acrobat-creating__editing_%[email protected]
    ) or at Adobe Forums (
    http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/message/2936746#2936746.
    Ohio Means Jobs
    You're looking for something unique. Use more than an ordinary site.
    http://www.ohiomeansjobs.com
    This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message.

  • Icloud 2.0 and outlook 2007 send issues

    icloud 2.0 and outlook 2007 send issues
    i cannot send email any longer in outlook 2007

    Look at this discussion:
    Re: Excel 2007 problem opening xlsx files when iCloud control panel is installed
    .... and the problem is still not solved (iCloud 3.1.0.40) and I guess will never be. We need to rename or delete the shellstreams.dll or save the excel-files as .xls to solve the problem for ourselves!
    What a shame!

Maybe you are looking for