Excel 2013 BeforeRightClick Event fails on Windows 8.1 Tablet (it's an Excel 2013 tablet touch screen interface bug)
I have developed customized table context menus in an Excel 2013 workbook on my Laptop. They work just fine on my laptop and my work desktop. But when I try to run them on my tablet PC the Worksheet_BeforeRightClick event in Excel 2013 never fires. Other
worksheet events appear to work okay. I have fully reinstalled Office 2013 Pro and that does not make any difference.
I have read other comments regarding this same problem going back to 2013, but have never seen Microsoft respond to this issue. Nor have I been able to find a resolution. Has anyone else run into this and found a solution?
Additional Discoveries: Testing on my tablet shows that adding one custom CommandBarButton to either the top or the bottom of the default "List Range Popup" context menu causes the Worksheet_BeforeRightClick event to fail. The basic context
menu commands still show up, but the default dropdown button for additional context menu commands disappears. The event is perhaps firing, but any customized code for the context menu is not being handled properly by Excel. This does appear to be a bug and
not a question of coding error. Perhaps someone else with a tablet PC running WIndows 8.1 could test this.
Based on comments
here this bug was introduced in Excel 2013 because others find the problem does not exist when using Excel 2010 on a tablet PC. Note that all the commenters on the linked thread that are experiencing this problem are using tablet PCs.
Update 3-13-15: I stand corrected. The Worksheet_BeforeRightClick does work on Excel 2013 Windows 8.1 tablets. I happen to own an Asus VivoTab Note 8, which comes with a Wacom stylus. If I use the Wacom sylus to right click on an Excel 2013 worksheet cell,
the Worksheet_BeforeRightClick event fires and modified context menu code runs just fine. But the code will not run if one uses their finger to right click a worksheet cell. This explains why this problem only shows up on tablet PCs. So the "bug"
introduced in Excel 2013 is a general user touch screen interface bug and not an Excel events programming bug.
Update 3-21-15: Switched to a Toshiba Protege laptop with touch screen. Same issue with finger touch screen interface on the Toshiba touch screen as with the Asus VivoTab touch screen.
Laptop: Toshiba Protege (with touch screen), Windows 8.1 64bit and MSOffice 2013 Pro 32bit
Tablet: Asus VivoTab Note 8, Windows 8.1 32bit and MSOffice 2013 Pro 32 bit
Desktop: Generic, Windows 7 64bit and MSOffice 2013 Pro 64bit
phillfri
Hello Phil,
Command bars were deprecated and shouldn't be used any longer. Instead, you need to use the Fluent UI (aka Ribbon UI) instead. You can read more about the new UI in the following series of articles in MSDN:
Customizing Context Menus in Office 2010
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)
As a workaround you can add a custom control to the context
menu with the getEnabled or getVisible callback which will be invoked before the context menu is shown.
Similar Messages
-
Windows 8 Pro tablet - Syclo screen layout not displayed properly data entry
Hi Team,
We are working on the windows 8 pro tablet to test the standard
service manager 4.2 application
During the testing in windows 8 Pro tablets, when we want to enter any data in syclo screen with the help of tablet’s keyboard, the input
fields becomes so small that we are not able to enter the data.
Is there any configuration which can be done so that the screen isclearly visible when data entry is made in the syclo screen.
If anyone has faced similar issue please share how to over come this.
Please advice
Thanks
NehaHello Phil,
Command bars were deprecated and shouldn't be used any longer. Instead, you need to use the Fluent UI (aka Ribbon UI) instead. You can read more about the new UI in the following series of articles in MSDN:
Customizing Context Menus in Office 2010
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)
As a workaround you can add a custom control to the context
menu with the getEnabled or getVisible callback which will be invoked before the context menu is shown. -
This happens about 90% of the time. Going to the same websites in IE or Chrome that problem doesn't occur. What's wrong with my Firefox settings? And how do I fix this.
I'm afraid I'm not sure whether they will work. They will at least need to have been updated by the add-on developer to work with v26.
There may be other limitations. I know that in early builds only add-ons which use the Addons SDK would work. This is still a development pre-alpha build so you should expect some issues / limitations until it reaches full release. I believe that is expected in December this year.
If you are willing to give it a go I recommend installing it and testing out what is possible. Installing Nightly will not affect your current stable channel install so if you don't like Nightly you can just uninstall it and go back to using Firefox 23.
I hope that helps. -
Windows 8 how to bring up copy/paste option from touch screen
How do you bring up Copy/Paste option from touch screen?
Adobe Reader Touch supports copying text only (not images).
Tap on text and move "grabbers" to adjust text selection (Touch) or select text with a mouse.
Press and hold (Touch) or right-click with a mouse to bring up the context menu.
Select Copy from the context menu.
You can paste the copied text to an existing sticky note or text field in Adobe Reader Touch or to other application such as Microsoft Word or Notepad. -
DRIVE TO TOUCH SCREEN - WINDOWS 8
Hi.
I've installed the windows 8 on my HP TouchSmart 520-1050 and the touch screen stoped your function. I didn't find its drive. What to do?! The HP will create a specific drive to this computer? Waiting for answer.
Thanks!THIS is HP's position on Windows 8 support and any HP computer not supplied with Windows 8;
Not all Windows 8 features may be available on all PCs.
Your particular experience with Windows 8 will be determined by the capabilities of your PC.
HP is providing upgrade instructions and drivers will be available for most Windows 7 systems sold after 1st October 2011.
If you want to restore the original operating system after upgrading, you must create HP recovery media before you upgrade.
Please note that if you purchased your system prior to October 1, 2011, HP has not tested these PCs or developed Windows 8 upgrade instructions or drivers for them. Upgrading such systems may be difficult or impossible.
and
Important information regarding additional limitations and requirements;
Screen Resolution Requirements
Limitations with DVD playback software
Limitations with Blu-ray playback software
Limitations with TV Tuner software
Secure Boot & other UEFI dependent features
Secure Boot & other UEFI dependent features
Limitations with touch screen capabilities
Windows 7 PCs with touch screens will not have full Windows 8 touch capabilities after upgrade.
HP PCs with touch input hardware designed for Windows 7 will provide a comparable experience for only two touch point applications after the upgrade to Windows 8. HP Windows PCs with touch input hardware will not support Windows 8 applications that require more than two simultaneous touch points.
Additionally, Windows 8 edge swipes may not be available due to the recessed bezel on HP touch systems shipped with Windows 7.
HP TouchSmart Magic Canvas and HP TouchSmart applications are not compatible with Windows 8 and must be uninstalled before upgrading. Note that content created using the TouchSmart applications such as Graphitti will not be available after upgrading.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Touch Screen windows 8 internet explorer
The computer has 2 different types of internet explorers. One is in the desktop area, this is the normal internet explorer browser. Then the 2nd one is the the apps start window, this internet explorer is the new version for easy touch screen use. But when I touch that one it automatically takes me to the desktop and opens that old version.
Hello gaby:
Welcome to HP's forum boy I am happy to have Windows 7 computers and Vista earler addition computer. Windows 8 is a complete night mare. You can post your issue here on Microsoft web-site http://answers.microsoft.com/en-us/ie/forum/ie9?auth=1 for more exposure may be some there might answer it. This is Microsoft direct support most deffently will fix your issue. https://support.microsoft.com/common/international.aspx?RDPATH=%2foas%2fdefault.aspx%3fgprid%3d31903... I guess no has ran into this issue yet here. I would hate to see you wait a long time for an answer. This is a Microsoft software issue. Good luck I hope they can fix it for you so you can enjoy your new computer. You are welcome frrw. -
Portage M750 Touch screen issues with windows 7
I just purchased a used Toshiba portege M750. Windows 7 is installed and I cannot get the touch screen to work. The digitizer portion works great but the touch screen does not work. Please advise.
Portege M750-S7221
Portégé M750 Series User’s Guide
Downloads here
Sevice Pack 2 has not yet been issued for Windows 7.
The digitizer portion works great but the touch screen does not work.
I don't see anything either in the spec or in the User's Guide about a touch screen.
Here's the spec.
Display - 12.1” diagonal widescreen LED backlight LCD display at 1280 x 800 native resolution (WXGA) with indoor/outdoor enhanced viewing supporting digital pen
-Jerry -
Touch screen from windows to mac
If I have a touch screen windows computer and I install mac with VMware with the touch screen work?
It may depend on vmtools support for your hardware. Might try them here.
https://communities.vmware.com/welcome
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
How can I handle touch screen events with Swing?
Hi,
I was wondering how i can handle touch screen events. Are there APIs for that or is it just a mouse event?
Thank you in advance.
TimI have recently created an application that ran on a touch screen system. I used the normal mouse events attached to the swing components (onClick) and these were translated by the touch screen. Typically I created a calculator type keypad, touched the screen on the text box where I wanted the data to appear and then pressed the keypad buttons to populate the field. No special drivers, just using swing components
Hope that helps
yeah, this is really useful info.. me too trying to build an application for the touch screen... just wondering how other events like focus gained, tree selection events are recognized by touch screen? can we have focus and tree, table selection events etc, as it is in the touch screen as well?? or everything is just mouse event only?? -
Office 2013 pro plus activation fail on windows 8
hi guys
I have issue about getting Office 2013 pro plus activation fail on windows 8 via KMS server.
When I test using KMS server via nslookup -type=srv _vlmcs._tcp all looks good with corporate KMS server.
Activation fine with windows 7 environment
Any idea
This topic first appeared in the Spiceworks CommunityHi
We recommend you download it from the website and extract it again to make sure your source install is complete.
Run setup.exe as administrator then try the install.
If the issue persists, refer to the article on General troubleshooting for installing Office 2013 and Office 365:
http://support.microsoft.com/kb/2822317
Regards
Tylor Wang
TechNet Community Support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hello all-
I am currently trying to configure group policy (specifically folder redirects) from a new Windows Server 2008 in my home... the server acts as both an AD DS and file server for 4 client computers, all running Windows Vista Ultimate.
Here are the steps I am currently taking:
I create a new Group Policy called All Users and Computers and apply it to the All Users and Computers OU, which contains exactly what it says (all users and computers in the domain).
I verify that a new folder was created in \\<FQDN>\sysvol\<FQDN>\Policies. The new folder created is named {6479C8E0-3134-4B4F-B047-7ADD51684684}
I change the GPO Enforced setting to Enforced.
I attempt to use the gpupdate command to see if the group policy can be updated successfully. In a command prompt, I type gpupdate <enter>. I receive the message 'Updating Policy...' then after about 15 seconds the message 'User Policy update has completed successfully.'
I keep the cmd window open. After about 10 seconds another message apperas which says "Computer policy could not be updated successfully. The following errors were encountered: The processing of Group Policy failed. Windows attempted to read the file \\<FQDN>\sysvol\<FQDN>\Policies\{6AC1786C-016F-11D2-945F-00C04Fb984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
To diagnose the failure, review the event log or invoke gpmc.msc to access information about Group Policy results."
I confirm that the error code is #3 using the Event Log, "The system cannot find the file specificed"
Of course the system cannot find the file specified because the folder does not exist in the sysvol folder. I am wondering why Windows is trying to read from this location when it does not exist, and is not the new group policy I created! I have no other group policies linked or enforced to any other OU/Domain/etc. Any help resolving this issue would be greatly appreciated.Hello all and thanks for the help. First a few things:
I understand that the DC should not be running RRAS, but this a simple server being used in aa home environment by 4 users and getting another server just for RRAS would be overkill.
Secondly, I currently have it so that while the router is handling DHCP, I have reserved a fixed IP for the server, so it always has 192.168.1.100. If I were to use the server as the DHCP, what would my hardware configuration have to look like? I currently have the router plugged into the ISP modem, and then server plugged into the router. All other clients connect to the router wirelessly.
Here's the dcdiag output. I tried dcdiag /fix but to no avail.
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine KELLERDCFS, is a Directory Server.
Home Server = KELLERDCFS
* Connecting to directory service on server KELLERDCFS.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... KELLERDCFS passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Advertising
The DC KELLERDCFS is advertising itself as a DC and having a DS.
The DC KELLERDCFS is advertising as an LDAP server
The DC KELLERDCFS is advertising as having a writeable directory
The DC KELLERDCFS is advertising as a Key Distribution Center
The DC KELLERDCFS is advertising as a time server
The DS KELLERDCFS is advertising as a GC.
......................... KELLERDCFS passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
Skip the test because the event log File Replication Service does not exist.
......................... KELLERDCFS passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... KELLERDCFS passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... KELLERDCFS passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... KELLERDCFS passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Domain Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role PDC Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Rid Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Infrastructure Update Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
......................... KELLERDCFS passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC KELLERDCFS on DC KELLERDCFS.
* SPN found :LDAP/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :LDAP/KELLERDCFS.keller-pa.net
* SPN found :LDAP/KELLERDCFS
* SPN found :LDAP/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :LDAP/42268b36-801f-4a6d-b162-34f3b01e04bb._msdcs.keller-pa.net
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/42268b36-801f-4a6d-b162-34f3b01e04bb/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net
* SPN found :HOST/KELLERDCFS
* SPN found :HOST/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :GC/KELLERDCFS.keller-pa.net/keller-pa.net
......................... KELLERDCFS passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC KELLERDCFS.
* Security Permissions Check for
DC=ForestDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=keller-pa,DC=net
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=keller-pa,DC=net
(Configuration,Version 3)
* Security Permissions Check for
DC=keller-pa,DC=net
(Domain,Version 3)
......................... KELLERDCFS passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\KELLERDCFS\netlogon
Verified share \\KELLERDCFS\sysvol
......................... KELLERDCFS passed test NetLogons
Starting test: ObjectsReplicated
KELLERDCFS is in domain DC=keller-pa,DC=net
Checking for CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net in domain DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net in domain CN=Configuration,DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
......................... KELLERDCFS passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
......................... KELLERDCFS passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 1600 to 1073741823
* KELLERDCFS.keller-pa.net is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 1100 to 1599
* rIDPreviousAllocationPool is 1100 to 1599
* rIDNextRID: 1111
......................... KELLERDCFS passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: DFSR
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... KELLERDCFS passed test Services
Starting test: SystemLog
* The System Event log test
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:53:59
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:59:02
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:04:04
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:09:06
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:14:08
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:19:10
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:24:12
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:29:15
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:34:17
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:39:19
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:49:23
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
......................... KELLERDCFS failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net and backlink
on
CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
The system object reference (serverReferenceBL)
CN=KELLERDCFS,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=keller-pa,DC=net
and backlink on
CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
......................... KELLERDCFS passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : keller-pa
Starting test: CheckSDRefDom
......................... keller-pa passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... keller-pa passed test CrossRefValidation
Running enterprise tests on : keller-pa.net
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
PDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Preferred Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
KDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
......................... keller-pa.net passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... keller-pa.net passed test Intersite
Here's the nslookup from Vista client:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Andrew>nslookup KELLERDCFS
Server: UnKnown
Address: 192.168.1.100
Name: KELLERDCFS.keller-pa.net
Addresses: 192.168.1.150
192.168.1.100
C:\Users\Andrew>
Thanks again! -
LDAP create event failed : Failed to find orclpwdexpirationdate
Hi,
When i try to create a user, i am getting the following error.
IAM-2050243 : Orchestration process with id 333, failed with error message IAM-3010201 : LDAP create event failed : Failed to find orclpwdexpirationdate in mandatory or optional attribute list..
Query:
1. I could create users earlier connecting to the same OID. Is there any change in OID creating this issue?
2. I could not find this attribute in OID. Is this a default parameter available in OID?
3. I could not find this attribute in OIM as well (Customer fields for Manage Users) . How can i find this parameter in OIM?
Any help to resolve this error?
Complete stack trace is given below:
[2013-01-28T20:41:41.623+05:30] [oim_server1] [NOTIFICATION] [] [oracle.iam.conf.impl] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 583c10bfdbd326ba:-27ccd12:13c817229bb:-8000-0000000000000521,0] [APP: oim#11.1.2.0.0] The system property with keyword OIM.DiagnosticEnabled does not exist.
[2013-01-28T20:41:41.630+05:30] [oim_server1] [NOTIFICATION] [] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 583c10bfdbd326ba:-27ccd12:13c817229bb:-8000-0000000000000521,0] [APP: oim#11.1.2.0.0] Orchestration process moved to failed stage, and the corresponding error is - {0}[[
oracle.iam.platform.kernel.EventFailedException: IAM-3010201:LDAP create event failed : Failed to find orclpwdexpirationdate in mandatory or optional attribute list.:Failed to find orclpwdexpirationdate in mandatory or optional attribute list.
at oracle.iam.ldapsync.impl.util.LDAPSyncUtil.createEventFailedException(LDAPSyncUtil.java:959)
at oracle.iam.ldapsync.impl.util.LDAPSyncUtil.createEventFailedException(LDAPSyncUtil.java:975)
at oracle.iam.ldapsync.impl.eventhandlers.user.UserCreateLDAPHandler.execute(UserCreateLDAPHandler.java:98)
at oracle.iam.platform.kernel.impl.OrchProcessData.runPreProcessEvents(OrchProcessData.java:970)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:706)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:268)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:801)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.process(OrchestrationEngineImpl.java:550)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:485)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:439)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy252.orchestrate(Unknown Source)
at oracle.iam.request.impl.RequestEngine.startOrchestrationFromPreProcess(RequestEngine.java:5350)
at oracle.iam.request.impl.RequestEngine.triggerOperation(RequestEngine.java:5297)
at oracle.iam.request.impl.RequestEngine.doOperation(RequestEngine.java:5028)
at oracle.iam.impl.OIMServiceImpl.doOperation(OIMServiceImpl.java:43)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy466.doOperation(Unknown Source)
at oracle.iam.api.OIMServiceEJB.doOperationx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy465.doOperationx(Unknown Source)
at oracle.iam.api.OIMService_1soh89_OIMServiceRemoteImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at oracle.iam.api.OIMService_1soh89_OIMServiceRemoteImpl.doOperationx(Unknown Source)
at oracle.iam.api.OIMService_1soh89_OIMServiceRemoteImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at oracle.iam.api.OIMService_1soh89_OIMServiceRemoteImpl_1036_WLStub.doOperationx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy464.doOperationx(Unknown Source)
at oracle.iam.api.OIMServiceDelegate.doOperation(Unknown Source)
at oracle.iam.ui.catalog.model.am.CatalogAMImpl.doOperation(CatalogAMImpl.java:1316)
at oracle.iam.ui.catalog.model.am.CatalogAMImpl.submitCatalog(CatalogAMImpl.java:1697)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.adf.model.binding.DCInvokeMethod.invokeMethod(DCInvokeMethod.java:657)
at oracle.adf.model.binding.DCDataControl.invokeMethod(DCDataControl.java:2143)
at oracle.adf.model.bc4j.DCJboDataControl.invokeMethod(DCJboDataControl.java:3114)
at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:261)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1635)
at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2150)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:740)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:402)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:210)
at oracle.iam.ui.platform.utils.FacesUtils.executeOperationBinding(FacesUtils.java:165)
at oracle.iam.ui.platform.utils.FacesUtils.executeOperationBindingFromActionListener(FacesUtils.java:112)
at oracle.iam.ui.catalog.view.backing.CartReqBean.submitActionListener(CartReqBean.java:833)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(AstValue.java:187)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1018)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:386)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:117)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.iam.ui.platform.servletfilter.IdentityContextFilter.doFilter(IdentityContextFilter.java:50)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.iam.platform.servletfilter.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:164)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:248)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Edited by: user10307811 on Jan 28, 2013 7:28 AMHi,
U need to create attribute orclpwdexpirationdate and add it to OrclXIDPersonobjec class in OID -
CryptDecrypt function failing on Windows Server 2012
Hi,
I have a sample program which does encryption / decryption.
This program works on Win7 and Win8.1 but fails on Windows Server 2012.
Please can somebody help me on resolving this issue?
const char KEY_FILE[255] = "C:\\key.txt";
In Constructor:
dwResult= 0;
hProv = 0;
hKey = 0;
hSessionKey = 0;
cbBlob = 0;
pbBlob = NULL;
cbBlob = file_length(KEY_FILE);
pbBlob = (BYTE*)malloc(cbBlob + 1);
memset(pbBlob, 0, cbBlob + 1);
FILE *fp = fopen(KEY_FILE, "rb");
if (fp) {
fread(pbBlob, 1, cbBlob, fp);
fclose(fp);
} else {
free(pbBlob);
pbBlob = NULL;
if (!CryptAcquireContext(&hProv, NULL, MS_DEF_PROV, PROV_RSA_FULL, 0))
dwResult = GetLastError();
if (dwResult == NTE_BAD_KEYSET)
if (!CryptAcquireContext(&hProv, NULL, MS_DEF_PROV, PROV_RSA_FULL, CRYPT_NEWKEYSET))
dwResult = GetLastError();
MessageBox("Error [0x%x]: CryptAcquireContext() failed.", "Information", MB_OK);
return;
} else {
dwResult = GetLastError();
return;
if (pbBlob) {
if (!CryptImportKey(hProv, pbBlob, cbBlob, 0, 0, &hSessionKey))
dwResult = GetLastError();
MessageBox("Error [0x%x]: CryptImportKey() failed.", "Information", MB_OK);
return;
} else {
if (!CryptImportKey(hProv, PrivateKeyWithExponentOfOne, sizeof(PrivateKeyWithExponentOfOne), 0, 0, &hKey))
dwResult = GetLastError();
MessageBox("Error CryptImportKey() failed.", "Information", MB_OK);
return;
if (!CryptGenKey(hProv, CALG_RC4, CRYPT_EXPORTABLE, &hSessionKey))
dwResult = GetLastError();
MessageBox("Error CryptGenKey() failed.", "Information", MB_OK);
return;
//{{AFX_DATA_INIT(CCryptoEncryptionDlg)
m_cipher = _T("");
m_clear = _T("Encrypt me");
When I click on Encryption Button:
UpdateData();
unsigned long length = m_clear.GetLength() +1;
unsigned char * cipherBlock = (unsigned char*)malloc(length);
memset(cipherBlock, 0, length);
memcpy(cipherBlock, m_clear, length -1);
if (!CryptEncrypt(hSessionKey, 0, TRUE, 0, cipherBlock, &length, length))
dwResult = GetLastError();
MessageBox("Error CryptEncrypt() failed.", "Information", MB_OK);
return;
m_cipher = cipherBlock;
m_clear = "";
free(cipherBlock);
UpdateData(FALSE);
When I click on Decrypt button:
UpdateData();
unsigned long length = m_cipher.GetLength() +1;
unsigned char * cipherBlock = (unsigned char*)malloc(length);
memset(cipherBlock, 0, length);
memcpy(cipherBlock, m_cipher, length -1);
int retVal = CryptDecrypt(hSessionKey, 0, TRUE, CRYPT_DECRYPT_RSA_NO_PADDING_CHECK, (BYTE*)cipherBlock, &length);
if (!retVal)
dwResult = GetLastError();
MessageBox("Error CryptDecrypt() failed.", "Information", MB_OK);
return;
dwResult = GetLastError();
m_clear = cipherBlock;
m_cipher = "";
free(cipherBlock);
UpdateData(FALSE);
The source is from http://www.codeproject.com/Articles/11578/Encryption-using-the-Win-Crypto-API
I just got the source code from above link and compiled in VS2012. The same code works as-is in Win8.1 but fails in loading itself in Windows Server 2012.
Thanks in advance.
Regards,
RajWindows CE is pretty old but I see that used a bit in 3rd world markets where people are not rich enough to afford more modern gear.
I use 7-zip for backups, and the SDK is open source which means it can be used in another project such a specialized backup or other tool
7-zip has the AES in the SDK which is been checked as solid.
Place your rig specifics into your signature like I have, makes it 100x easier!
Hardcore Games Legendary is the Only Way to Play!
Vegan Advocate How can you be an environmentalist and still eat meat? -
SAP B1 8.81 PL 04 Client instllation failed on Windows 7 PC
Hi Experts,
At one of my client SAP B1 8.81 PL 04 Client instllation failed on Windows 7 PC.
When I execute Setup.exe, it end with error message 1628 : Installation not completed
Thanking you in advance.
Samir GandhiHi Everybody,
Issue resolved,
I did right click on setup.exe and choose Run as Administrastor
Thanks
Samir Gandhi -
Matt,
Thanks for the reply.
In my current experience, I am not able to successfully subscribe to and see the TargetApplicationChosen event fire from Windows Phone 8.1.
In Windows Store 8.1 (Tablet), it works fine.
Questions
Is this event expected to fire in Window Phone 8.1 (Universal Apps, Not Silverlight 8.1) ?
Does this event depend on the target application to supply AppName?
Thanks for your help. Much appreciated.
Example Code Block
//From Page Contstructor or OnNavigatedTo Handler
_dataTransferManager = DataTransferManager.GetForCurrentView();
_dataTransferManager.TargetApplicationChosen += DataTransferManagerOnTargetApplicationChosen;
private void DataTransferManagerOnTargetApplicationChosen(DataTransferManager sender, TargetApplicationChosenEventArgs args)
//fires in tablet but not phoneThis is not an answer, Mr. Wong. The link you referenced refers to the DataTransferManager class being supported only in Native apps, which includes Windows Phone 8.1 RT apps. All aspects of the DataTransferManager work except for the TargetApplicationChosen
event under a WP8.1 universal app. This event does NOT fire in the Windows Phone 8.1 RT API implementation of DataTransferManager.
You need to reopen this thread and address the issue, please. The lack of support for this event is problematic for some phone scenarios, most notably supporting NFC Tap and Share.
Mark Jones, Owner MJ App Factory
Maybe you are looking for
-
Just got a new iPod touch...turned it on and it automatically told us to plug it into iTunes...it never asked me for my password to connect to my network...Help!!
-
How do I switch user in Common Provider 11.1.1.3 ?
Hi, After I login to Smartview in Excel using Common Provider 11.1.1.3, I don't seem to be able to change my login ID. It always connects me automatically as my 1st login ID. how do I switch user in Common Provider 11.1.1.3 ?
-
When do you plan on producing a version that will actually accept text
I am TRYING to use firefox for android on my galaxy nexus every time I try to type in a password for any account firefox keeps adding characters to the password field making the password invalid. By the time I can enter a 12 character password there
-
Change currently active LV version in batch script
Hello, I use two different applications on my computer and one of them should run in LV 2011, the other one in LV 2012. Both versions are installed and it works fine as long as I start the correct LV version manually before starting the application (
-
Network Startup - how do i escape this
Hi, My wife set my computer into "Network Startup" mode. You know using the Startup Disk control panel. Now my computer sits at startup waiting and displaying a globe. How do i get out of this mode?