Excel application disappeared

iMac running OSX 10.7.5
Microsoft Office for Mac 2011
Excel application gone and can't re-install because Apple ID invalid?
After not using for a few weeks, by Excel application disappeared. Application Icon still there, but error message appears. Excel users files still there. error message says: "Check the the developer to make sure Microsfot Excel works with this version of Mac OS X. YOu may need to reinstall the application."
I purchased Office for Mac 2011 and have a product ID. I tried fixing the application but that didn't work, so the support info said to re-install. When I try with my product code, it says that my product key is short 5 digits; it is 20 digits not 25. However, when I look at the Product Key in Outlook, or Word, which are part of the Office Product I have, it says the product is licensed to me and shows a 20 digit product ID. Why is my product key short 5 digits so that I cannot re-install Excel. And why did my Excel application disappear? I have automatic updates on, so it may have been an update. I really can't pinpoint when my Excel application disappeared.

I suggest you post your question on the Microsoft Mac Office forums as that's where the Office gurus hang out...
http://answers.microsoft.com/en-us/mac

Similar Messages

SharePoint PowerShell script to open Excel.Application on Windows server 2008 R2

Hi
I am building a PowerShell script to open an Excel file store on SharePoint document library. Sound simple enough but I just couldn't get over an error and hopefully someone can help give an answer here.
I have found many sample codes to use. All of the sample codes show that a new object must be created for Excel application
like ($Excel = New-Object -comobject Excel.Application) before that excel file can be read.
When I run this comand on a SharePoint server (Windows 2008 R2) either inside the script or by itself I keep getting the following error:
New-Object : Cannot load COM type Excel.Application.
+ $excel = New-Object <<<< -Com Excel.Application
+ CategoryInfo : InvalidType: (:) [New-Object], PSArgumentException
For the test, I ran this comand on a Windows 7 with MS Office applications installed, then it ran fine.
Is that because I don't have Office application (Excel) installed on the server to run this or some services need to be turned on?
From the sample codes, look like I should be able to run it on the Server with SharePoint installed.
Thanks for any advice or solution to resolve my issue.
Swanl

So I'm assuming this won't return anything either?
Get-WMIObject Win32_ClassicCOMClassSetting | ? {$_.VersionIndependentProgId -like 'excel.application'}
You need Office/Excel installed on the server because you're accessing those .DLLs for the automation functionality, but depending on what you're trying to do you may be able to use one of the office viewers:
http://www.microsoft.com/en-us/download/details.aspx?id=10 although I'm not sure how much of the com (if any) is exposed in a viewer install. if Office is not possible due to
budget reasons, I believe there are several 3rd party providers who can produce a com object that will handle Excel formats.

Safari application-disappeared. & can't be found after download/install ...

This morning, Safari application was no longer in the Applications Folder on my iMac. (Nor was FireFox!) Can't find it anywhere, even using 'Search'.
So, I installed Safari from a previously downloaded .dmg/.pkg. Went through all the steps, and greeted with "Installation was successful!!!"
However, the [supposedly] newly installed Safari application is nowhere to be found.
I have been through various cycles of this, even downloading anew on MacBook and then dragging from MacBook to iMac. I have been careful to use the correct versions to match the Mac OS 10.6.2 that's on the iMac.
I'm befuddled. Can't find a similar problem on the forum ...

HI,
*I have been careful to use the correct versions to match the Mac OS 10.6.2 that's on the iMac.*
Absolutely.
First, instead of using a .dmg Safari from a previously downloaded .dmg/.pkg... that might be a previous version of Safari, Go here and try downloading the newest version of Safari.
http://www.apple.com/safari/download/
Make sure and select Snow Leopard on the left. If after the installation, you still can't use Safari
after you download and install Safari....
When you have probems with applications disappearing, it's probably a good time to check the startup disk for errors.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If the startup disk appears to be ok and there sufficient disk space, try booting in Safe Mode
What is Safe Mode
Carolyn
Message was edited by: Carolyn Samit

Invalid method "Save As" from Excel application object

I have Windows 2000 and Excel 2002 installed on my machine.
I down loaded "renamed Excel 2000 workbook.vi" from NI website. Relinked ref num to Excel application object but get the error of invalid method (Save As). Tried to relink invoke node to Save As by selecting method from drop down menu. However this method is not on the list. Tried other excel objects but can not find "Save As" method. Has this been removed/moved?

I was able to correct the error by relinking the Workbooks->Open to Open. This changes the subsequent Invoke Node from IAppEvents to _Workbook. There you will find the Save As method.
Michael
www.abcdefirm.com
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

How to Use AccessibleObjectFromWindow API in VBA to Get Excel Application Object from Excel Instance Window Handle

I need to get the Excel.application object from a window handle using AccessibleObjectFromWindow. I can't seem to make the code work. First, I successfully search for the XLMAIN windows. Then, when I get a handle, I execute the AccessibleObjectFromWindow
function. It seems to return a value of -2147467262 in all cases. Therefore, I believe that it is returning an error value. I can't figure out how to determine the meaning of this value.
If it is an error value, I believe that one or more arguments are in error. My best guess at present is that the GUID argument is incorrect. I have tried two GUID values: {00020400-0000-0000-C000-000000000046} and {90140000-0016-0409-0000-0000000FF1CE}.
I have seen both used in conjunction with OBJID_NATIVEOM. Neither one seems to work. I really would prefer not to use the second one as it has an Excel major and minor version number. I would hate to have to change this code, if a new minor version appeared.
The attached code has been commented to show which parts have been shown to work and which not. I'm at my wits end and really need help.
Thanks
'This module is located in Access 2010, but this is an Excel question.
Option Compare Database
Option Explicit
' Module-Level Declarations
'The GetDesktopWindow function and FindWindowEx function work just fine.
Public Declare Function GetDesktopWindow Lib "user32" () As Long
Public Declare Function FindWindowEx Lib "user32" Alias "FindWindowExA" _
(ByVal hWnd1 As Long, _
ByVal hWnd2 As Long, _
ByVal lpsz1 As String, _
ByVal lpsz2 As String) _
As Long
'I'm not getting the expected output from this function (see below)
Private Declare Function AccessibleObjectFromWindow& Lib "oleacc.dll" _
(ByVal hwnd&, _
ByVal dwId&, _
riid As GUID, _
xlwb As Object)
Type GUID
lData1 As Long
iData2 As Integer
iData3 As Integer
aBData4(0 To 7) As Byte
End Type
Function ExcelInstances() As Long
' Procedure-Level Declarations
' Value of OBJID_NATIVEOM verified by checking list of Windows API constants _
on this site: http://www.lw-tech.com/q1/base.htm
Const OBJID_NATIVEOM = &HFFFFFFF0
Dim hWndDesk As Long 'Desktop window
Dim hWndXL As Long 'Child window
Dim objExcelApp As Object 'Final result wanted: Excel application object
'Following variable (xlapp) to be set by AccessibleObjectFromWindow function
Dim xlapp As Object
Dim IDispatch As GUID 'GUID used in call to AccessibleObjectFrom Window function
'Set up GUID to be used for all instances of Excel that are found
Dim tmp1 As Variant 'Return value from AccessibleObjectFromWindow
' Executable Statements
SetIDispatch IDispatch
IDispatch = IDispatch
'Get a handle to the desktop
hWndDesk = GetDesktopWindow 'This seems to work
Do
'Get the next Excel window
'The following statement seems to work. We are finding and counting _
correctly all the instances of Excel. hWndXL is non-zero for each _
instance of Excel
hWndXL = FindWindowEx(GetDesktopWindow, hWndXL, "XLMAIN", vbNullString)
'If we got one, increment the count
If hWndXL > 0 Then
'This works. We correctly count all _
instances of Excel
ExcelInstances = ExcelInstances + 1
'Here is the problem. The following statement executes and returns a value of _
-2147467262. xlapp, which is passed by reference to AccessibleObjectFromWindow, _
is set to nothing. It should be set to the object for Excel.application. _
I believe that this value is not an object. I tried to reference tmp1. in the _
immediate window. There was no Intellisense.
'I think that the function in returning an error value, but I can't figure _
out what it is. I believe that AccessibleObjectFromWindow returns error _
values, but I don't know where to find their values so I can interpret the _
function's results.
'As best I can tell, the hWndXL parameter is correct. It is the handle for _
an instance of Excel. OBJID_NATIVEOM is set correctly (see constant declaration _
above). xlapp is passed by reference as a non-initialized object variable, which _
will be set by AccessiblObjectFromWindow. IDispatch may be the problem. It is set _
as shown below in the procedure SetIDispatch(ByRef ID As GUID). This procedure _
appears to work. I can see that IDispatch is set as I intended and correctly _
passed to AccessibleObjectFromWindow.
tmp1 = AccessibleObjectFromWindow(hWndXL, OBJID_NATIVEOM, IDispatch, xlapp)
'Need to write code to test tmp1 for error. If none, then set objExcelApp = _
object. Also, I exect xlapp to be set to Excel.application
End If
'Loop until we've found them all
Loop Until hWndXL = 0
End Function
Private Sub SetIDispatch(ByRef ID As GUID)
'Defines the IDispatch variable. The interface _
ID is {90140000-0016-0409-0000-0000000FF1CE}.
'NOT USING {00020400-0000-0000-C000-000000000046}, _
which could be the problem
'9 is release version - first version shipped (initial release)
'0 is release type - retail/oem
'14 is major version
'0000 is minor version
'0016 is product ID - MS Excel 2010
'0409 is language identifier - English
'0 is x86 or x64 - this is x86
'000 reserved
'0 is debug/ship
'000000FF1CE is office family ID
With ID
.lData1 = &H90140000
.iData2 = &H16
.iData3 = &H409
.aBData4(0) = &H0
.aBData4(1) = &H0
.aBData4(2) = &H0
.aBData4(3) = &H0
.aBData4(4) = &H0
.aBData4(5) = &HF
.aBData4(6) = &HF1
.aBData4(7) = &HCE
End With
End Sub
DaveInCalabasas

I don't think you can return a reference to Excel's main window like that as you are attempting to do.
Ref:
http://msdn.microsoft.com/en-us/library/windows/desktop/dd317978(v=vs.85).aspx
It's relatively straightforward to return any workbook's window in any given instance, and in turn it's parent Excel app. Try the following and adapt as required (and include error handling) -
Option Explicit
Private Declare Function FindWindowEx Lib "User32" Alias "FindWindowExA" _
(ByVal hWnd1 As Long, ByVal hWnd2 As Long, ByVal lpsz1 As String, _
ByVal lpsz2 As String) As Long
Private Declare Function IIDFromString Lib "ole32" _
(ByVal lpsz As Long, ByRef lpiid As GUID) As Long
Private Declare Function AccessibleObjectFromWindow Lib "oleacc" _
(ByVal hWnd As Long, ByVal dwId As Long, ByRef riid As GUID, _
ByRef ppvObject As Object) As Long
Private Type GUID
Data1 As Long
Data2 As Integer
Data3 As Integer
Data4(7) As Byte
End Type
Private Const S_OK As Long = &H0
Private Const IID_IDispatch As String = "{00020400-0000-0000-C000-000000000046}"
Private Const OBJID_NATIVEOM As Long = &HFFFFFFF0
Sub test()
Dim i As Long
Dim hWinXL As Long
Dim xlApp As Object ' Excel.Application
Dim wb As Object ' Excel.Workbook
hWinXL = FindWindowEx(0&, 0&, "XLMAIN", vbNullString)
While hWinXL > 0
i = i + 1
Debug.Print "Instance_" & i; hWinXL
If GetXLapp(hWinXL, xlApp) Then
For Each wb In xlApp.Workbooks
Debug.Print , wb.Name
Next
End If
hWinXL = FindWindowEx(0, hWinXL, "XLMAIN", vbNullString)
Wend
End Sub
'Function GetXLapp(hWinXL As Long, xlApp As Excel.Application) As Boolean
Function GetXLapp(hWinXL As Long, xlApp As Object) As Boolean
Dim hWinDesk As Long, hWin7 As Long
Dim obj As Object
Dim iid As GUID
Call IIDFromString(StrPtr(IID_IDispatch), iid)
hWinDesk = FindWindowEx(hWinXL, 0&, "XLDESK", vbNullString)
hWin7 = FindWindowEx(hWinDesk, 0&, "EXCEL7", vbNullString)
If AccessibleObjectFromWindow(hWin7, OBJID_NATIVEOM, iid, obj) = S_OK Then
Set xlApp = obj.Application
GetXLapp = True
End If
End Function
Note as written if an instance does not have any loaded workbooks a reference will not be returned (though a workbook can be added using DDE, but convoluted!)
FWIW there are two other very different approaches to grab all running Excel instances though something along the lines of the above is simplest.
Peter Thornton

Ole excel application from abap

Hi all ,
           I   an calling one excel application from abap . I   don't want to make excel file visible , but insted want to save and close the file , by using method
saveas for excel application and later i want to see the file . file name i want to store in a variable .
eg :
CALL METHOD OF H_EXCEL 'FILESAVEAS' = RC
EXPORTING #1 = filename .
Can it be possible ?
regards,
SA

hi
i simpler method will be to use the function modules for this purpose.
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
         PROGRAM_NAME        = SYST-CPROG
         DYNPRO_NUMBER       = SYST-DYNNR
         FIELD_NAME          = ' '
         IMPORTING
           file_name           = file_name .
          lc_filename = file_name.
          CALL FUNCTION 'GUI_DOWNLOAD'
            EXPORTING
            BIN_FILESIZE                    =
              filename                        = lc_filename
              filetype                        = 'DAT'
            TABLES
              data_tab                        = gt_itab.
          IF sy-subrc <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
Fn module F4_filename will prompt for the name of the file to be saved and GUI_DOWNLOAD will save the file.
gt_itab is the internal table containing the data to be stored in excel.

HT1386 Hello, I synchronized my iPhones with iTunes, having a new laptop, I had to do this step. But instead of helping it, I lost many applications. All my good applications disappeared. How do I get them back? What I have to do? I bought those app!!!

Hello, I synchronized my iPhones with iTunes, having a new laptop, I had to do this step. But instead of helping it, I lost many applications. All my good applications disappeared. How do I get them back? What I have to do? I bought those app!!!
How is this possible? How can the iTunes eat what I bought and what for? To buy the applications again?! Geez!
Tell me the solution. It must exist one!

You can redownload you previously purchased apps for free as long as they are still available in the app store. Be sure you are logged into the Apple ID in iTunes used to purchase them, then follow this guide: http://support.apple.com/kb/HT2519.

Problem opening excel application, it opens all the workbooks at the at once!

Why everytime I open or start excel application, it opens and open many excel books at the same time! Is this an excel configuration problem? How can I just open excel and start a new excel book, without opening the rest of saved excelbooks?

Thanks LousyFool. With the help of an Apple store expert finally resolved the problem by eliminating the excel hidden folder. It happens that the excel folder resides in the library folder, and after he deleted it and open excel app it then creates a brand new empty folder. By eliminating the old excel folder the excel files that were opened automatically it fixed the problem!
Thank for your help

Excel Application Unable to Connect the Highavailable(Mirrorining) database

Hi Folks,
Please help me out from below Issue.
We have developed an Excel application to pull data from Back-end Database.
The database is configured in High availability Mirroring, When fail over occurs the Database moving from One server DB to Another Server DB.
But my Excel application is not pointing to the Failover DB when the One DB fails.
We are using the below Connection string in the excel application:
*"Data Source=Server A;Failover Partner=Server B; Initial Catalog=AdventureWorks; Integrated Security=True;"*
When Server A is unavailable, it shows the below error.
PFA : Error.jpg
And again asking for Authentication
PFA : Authentication.jpg
Here we need to Enter Credentials manually and then it is able to connect the desired database.
But it is not possible to spread credentials to end –user.
Can anyone please provide solution for this issue to automate the above scenario without manual intervention?
Thanks in Advance 

make sure that "sun.jdbc.odbc.JdbcOdbcDriver" is on your classpath ,

Excel sparklines disappear when saving the file.

Sparklines that I created in Excel 2011 disappear after saving them and reopening the document. I tried saving it in .xlsx and still nothing. Does anyone have a suggestion to fix this problem?

As Office is not an Apple product, I strongly recommend asking in the Microsoft Office:Mac forums here:
Office for Mac forums
Everyone there is a Mac user AND an Office user, something you can't say about Apple's forums. You will get the fastest help there and I think you will find the contributors more than helpful.

Urgent: CLIENT_OLE2.CREATE_OBJ('Excel.Application') get error

My OS is Window server 2003, Office 2003, Oracle Form 10G
I have installed Webutil successfully.
Before using webutil I had tried this command: OLE2.Create_Obj('Excel.Application'). It had worked fine but when I using webutil. I replace above command with this command: Client_OLE2.Create_Obj('Excel.Application')I have gotten error.
I don't know why. Could you help me, plz.
Thank so much.

More information, I see this exception in java console:
Exception occurred during event dispatching:
java.lang.ExceptionInInitializerError: java.security.AccessControlException: access denied (java.lang.RuntimePermission loadLibrary.jacob)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkLink(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at com.jacob.com.Dispatch.<clinit>(Dispatch.java)
     at oracle.forms.webutil.ole.OleFunctions.create_obj(OleFunctions.java:513)
     at oracle.forms.webutil.ole.OleFunctions.getProperty(OleFunctions.java:218)
     at oracle.forms.handler.UICommon.onGet(Unknown Source)
     at oracle.forms.engine.Runform.onGetHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)

EXCEL APPLICATION - WORK SHEET UPDATION

Hi All,
1. How to open an excel application which is on the application server ?
    If not local file.??
2. How to look for a particular worksheet ( Worksheet name is fixed here )?
    There are 20 worksheet in my excel file.
3. How to update the particular worksheet ( Columns are fixed ) ?
    While updating, today i will update the worksheet1 till 20 rows, tomorrow i want to start from 21st row.
Thanks in advance .
Expecting replies.
Regards
Vijay

Hi Vijay,
Refer the links. Not sure if it answers all your questions.
http://sap.ittoolbox.com/code/d.asp?d=3127&a=s
or to
http://sap.ittoolbox.com/code/d.asp?d=3126&a=s
or to
http://sap.ittoolbox.com/code/d.asp?d=3027&a=s
you can also check
http://sap.ittoolbox.com/code/d.asp?d=1614&a=s
These links were extracted from ITToolbox Sap source code exchange( http://sap.ittoolbox.com/code/d.asp?whichpage=1&pagesize=10&i=10&a=c&o=&t=&q=&qt= )
This pages are a free resource of code from other abappers who kindly share their knowledge to us.
>
<b>Multiple excel sheets generation in a workbook</b>
CREATE OBJECT EXCEL 'EXCEL.SHEET'.
GET PROPERTY OF EXCEL 'Application' = APPLICATION.
SET PROPERTY OF APPLICATION 'Visible' = 1.
CALL METHOD OF APPLICATION 'Workbooks' = BOOKS.
CALL METHOD OF BOOKS 'Add' = BOOK.
CALL METHOD OF BOOK 'WORKSHEETS' = SHEET.
CALL METHOD OF SHEET 'ADD'.
Fill all the sheets with relavant data
PERFORM SHEET1 TABLES ITAB1.
PERFORM SHEET2 TABLES ITAB2.
PERFORM SHEET3 TABLES ITAB3.
PERFORM SHEET4 TABLES ITAB4.
Quit the excel after use
CALL METHOD OF EXCEL 'QUIT'.
FREE OBJECT: COLUMN,SHEET,BOOK,BOOKS,APPLICATION,EXCEL. "NO FLUSH.
CLEAR V_SHEET.
FORM FILL_CELL USING ROW COL VAL.
CALL METHOD OF SHEET 'cells' = CELL NO FLUSH
EXPORTING #1 = ROW #2 = COL.
SET PROPERTY OF CELL 'value' = VAL.
FREE OBJECT CELL NO FLUSH.
ENDFORM. " FILL_CELL
FORM SHEET1 TABLES ITAB1 STRUCTURE ITAB1.
V_SHEET = Sheet Name.
V_NO = V_NO + 1.
CALL METHOD OF BOOK 'worksheets' = SHEET NO FLUSH EXPORTING #1 = V_NO.
SET PROPERTY OF SHEET 'Name' = V_SHEET NO FLUSH.
PERFORM FILL_SHEET1 TABLES ITAB1 USING V_NO V_SHEET.
CALL METHOD OF SHEET 'Columns' = COLUMN.
FREE OBJECT SHEET.
CALL METHOD OF COLUMN 'Autofit'.
FREE OBJECT COLUMN.
ENDFORM.
Repeat above procedure for all sheets you want to add
FORM FILL_SHEET1
TABLES ITAB1 STRUCTURE ITAB1
USING V_NO V_SHEET.
ROW = 1.
PERFORM FILL_CELL USING ROW 1 'Column1 Name'.
PERFORM FILL_CELL USING ROW 2 'Column2 Name'.
PERFORM FILL_CELL USING ROW 3 'Column3 Name'.
ROW = ROW + 1.
LOOP AT ITAB1.
PERFORM FILL_CELL USING ROW 1 ITAB1-Column1.
PERFORM FILL_CELL USING ROW 2 ITAB1-Column2.
PERFORM FILL_CELL USING ROW 3 ITAB1-Column3.
ROW = ROW + 1.
ENDLOOP.
ENDFORM.
Repeat above procedure for all sheets you want to add
<b>UPLOAD EXCEL into Internal Table</b>
Use FM ALSM_EXCEL_TO_INTERNAL_TABLE
TYPES:
BEGIN OF ty_upload,
field1 TYPE c length 12,
field2 TYPE c length 12,
field3 TYPE c length 12,
END OF ty_upload.
DATA it_upload TYPE STANDARD TABLE OF ty_upload WITH DEFAULT KEY.
DATA wa_upload TYPE ty_upload.
DATA itab TYPE STANDARD TABLE OF alsmex_tabline WITH DEFAULT KEY.
FIELD-SYMBOLS: <wa> type alsmex_tabline.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = filename
i_begin_col = 1
i_begin_row = 1
i_end_col = 3
i_end_row = 65535
TABLES
intern = itab.
LOOP AT itab ASSIGNING <wa>.
CASE <wa>-col.
WHEN '0001'.
wa_upload-field1 = <wa>-value.
WHEN '0002'.
wa_upload-field2 = <wa>-value.
WHEN '0003'.
wa_upload-field3 = <wa>-value.
ENDCASE.
APPEND wa_upload TO it_upload.
CLEAR wa_upload.
ENDLOOP.
**********another way*******
TYPE-POOLS truxs.
tables : ztable.
types: begin of t_tab,
col1(5) type c,
col2(5) type c,
col3(5) type c,
end of t_tab.
data : itab type standard table of t_tab,
wa type t_tab.
data it_type type truxs_t_text_data.
parameter p_file type rlgrap-filename.
data ttab type tabname.
at selection-screen on value-request for p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = p_file
start-of-selection.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
I_LINE_HEADER = 'X'
i_tab_raw_data = it_type
i_filename = p_file
tables
i_tab_converted_data = itab[]
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
end-of-selection.
loop at itab into wa.
ztable-col1 = wa-col1.
ztable-col2 = wa-col2.
ztable-col3 = wa-col3.
modify ztable.
endloop.
Reward points if this Helps.
Manish

EXCEL.APPLICATION

Hello,
I have a problem, I want to use the EXCEL.APPLICATION for opening an Excel file, but I want the user gets the control of the edition of that file and SAP waits to continue executing when user closes the file.
I used another method (cl_gui_frontend_services=>execute) but for some reasons this function doesn't usefull for me, althought this one waits the end of execution of Excel to continue executing the program.
I would like if anyone can tell me how I can use EXCEL.APPLICATION (a method or property) so I can open the file and continue with abap execution only when user closes the file.
Thanks in advance.
regards
My code until now:
DATA: excel1 TYPE ole2_object,
        workbooks1 TYPE ole2_object,
        libro TYPE ole2_object.
CREATE OBJECT excel1 'EXCEL.APPLICATION'.
*Make the excel application visible
SET PROPERTY OF excel1 'Visible' = 1.
CALL METHOD OF excel1 'Workbooks' = workbooks1.
SET PROPERTY OF excel1 'DisplayAlerts' = 0.
Open Pattern
CALL METHOD OF workbooks1 'Open' = libro
    EXPORTING
      #1 = g_file.

Hello,
After openning your Excel book, you can show a popup (a message type I for example) and then when the user accepts the code will continue the execution, saving the file and closing it, as SAP does when you see an Excel format when yo see data table in SE16 and passes to Excel.
For example:
MESSAGE i001(za) WITH text-001.
CALL METHOD OF libro 'Save'.
CALL METHOD OF libro 'Close'.
After the message you can execute an popup function module for asking if you want to save the changes, and then you can decide if execute SAVE method or not.
I hope this can help you.
Regards.
Edited by: Luis Rubio on Nov 20, 2008 1:09 PM

OLE Automation EXCEL.APPLICATION OPEN === CSV file

Hi Gurus,
no probs to open a XLS file via
      CREATE OBJECT grc_excel 'EXCEL.APPLICATION'.
      SET PROPERTY OF grc_excel 'VISIBLE' = 1.
      CALL METHOD OF grc_excel 'WORKBOOKS' = grc_wbook.
Open Workbook
      CALL METHOD OF grc_wbook 'Open'
        EXPORTING #1 = gfd_filename.
but how to deal with CSV ? They're opened not properly.
I tried #2 = 'CSV' but no luck.
Any Idea?
Cheers
carsten

COMMA separated files are SEMICOLON separated files in German Windows systems.
This ist set in Windows System settings for regions (enhanced).
EXCEL considers this settings when running normally. CSV is stored with ; and will be loaded properly after.
In OLE mode, EXCEL does not consider this regional setting and expects COMMA
If there's no option to tell lthe open method of OLE-Excel, I must translate SEMICOLIN toCOMMA before with all risks to translate text instead of separators...
I saw some opens with #2 as parameter for "read only" but nothing regarding "separator character" (CL_RMPS_MS_OFFICE_TOOLS~GET_BUILTIN_DOC_PROPS_FROM_FIL)
Thanks & Cheers
carsten

Excel application - can't remove from memory

I'm opening and reading a worksheet using the Excel application/reference methods from Labview. Worked fine until some short time ago where now all my sheets are opened up as "read-only". Worse yet, when I try to close the sheet and Quit excel application, task mgr shows it is still resident in memory.
This worked well until our IT department added some Microsoft updates. Any ideas?

I'm guessing the microsoft updates have somehow set the files to be read only now. I'd find the files on your disk and check their properties. As for it being resident in memory, is the reference still open? I'm not sure if this would cause this issue, but it may. Make sure you close any references relating to your file when you are done with them, then close the file.
CLA, LabVIEW Versions 2010-2013

Excel application disappeared

Similar Messages

Maybe you are looking for