Excel Readpage Save as another file problem

Hi,
I have attached the VI needed If you have any problems please let me know. This VI reads a excel page the user points to and displays the results. I have added a single cell where you can change the position of a single cell coordinates so that you can point to a single cell of your choice and retrieve that data. So my problem is now I want to save that data from that single cell to ANOTHER excel file. However, this is not working correctly for some reason I do not know why I believe I have done everything correctly hopfully it is just my inexperiance. I will continue to work on this and update it as I get more time but at the current moment I have hit a brick wall. I have visited the EXCEL BOARD and the vi is from there but I had to add somethings to it in order for it to work correctly as before it wouldn't even run because it was missing some connections and nodes.
Attachments:
ExcelReadPage.vi ‏45 KB

I took a look at the toolkits. The VIs are there, the problem is that
the linkages are a bit screwed up so the top-level VIs think the subVIs
are in different places. Also, the toolkits were written using an
older version of Excel, in which the "Range" object had the property of
"Value". Excel 2003 uses "Value2". So, if you have Excel 2003 even
after you load up the VI the "Value" property nodes need to be changed
to "Value2". This is not a fault of the toolkits - this is due to
Microsoft changing the ActiveX interface.
As to your issue: Your basic steps are to:
Create a new workbook
Write values to cells
Save workbook
The "Write Table to XL" that ships with LabVIEW does that. Launch the Example Finder (Help -> Find Examples) and search for "excel". Then, open the "Write Table to XL". The "Table" control is the data that you want to write. It can be a single cell or multiple cells. If you have a single value, just make a 2D array out of it. As it's written it will prompt you if you want to save the file. This is from the "Close" method. You can wire a True constant to the "SaveChanges" parameter and a path to the "Filename" parameter.

Similar Messages

  • How can I extract certain pages from my document and save as another file?

    How can I extract certain pages from my document and save as another file?

    You would need Adobe Acrobat to do that, not Adobe Reader.

  • Export to Excel and Save as Static File

    Hello all,
    When I export to excel from SharePoint 2013, and save the file, the data remains dynamic in that if I update the list in SharePoint it will update the data in Excel. This is great and I use it in a few places, but I also need to capture a point in time and
    save the exported Excel file as static data (i.e. Export to Excel, and Save as the Q3 Report). How can I save the file as static/remove the dynamic link so I just have the data at the time of export?
    Thanks!
    K.
    Personal Blog: http://thebitsthatbyte.com

    Hi Kelly,
    According to your description, my understanding is that you want to export to excel as a static file.
    In SharePoint, when you export list to excel, it works as a one-way sync. It can sync data from SharePoint to Excel. If you don’t want to sync the data from SharePoint, you can copy the data from the exported excel file to a new excel, then save the new
    excel file.
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Save Metadata to File Problem

    This is really puzzling me .... In Catalogue Settings, I have 'Automatically write changes into XMP' NOT ticked. When I want to save, I Select All and then 'Save Metadata to File' . However, most of the time this only saves the 'Most Selected' image, it does not create/write to XMP for all the selected files? However, I know this is meant to save to all the selected files and I also know that sometimes it does/has saved all the XMP files for me. I cannot figure out why sometimes it saves all the files and sometime only the 'most selected' ? I have tried in both Library and Develop Modules. Is there a reason for this or is it some kind of bug?
    I'm using Lightroom Ver. 3 on a Mac. But I also used to have the same problem on Version 2 as well.
    Many Thanks

    Switch to Grid view - anything you do in Grid view will always apply to all selected images.

  • Acrobat 7 - Excel Doc saves as two files

    Hi,
    I have a user who has a complex custom Excel sheet.
    When she selects to print the document to PDF, it saves as two files.
    First it asks her to save the file - she does so.
    Then a second save window opens and asks her to save again - she need to change the file name (as it cmes up with the same name again) and save.
    The first file saves the first 5 pages (even though when it goes to print it shows that there are 6 pages)
    The second file saves the 6th page.
    The user must then combine the documents.
    The user has an xp machine.
    We have tried using different PDF creators CutePDF and Nuance.
    Cute - saves the files in the same way - two pages.
    Nuance on the otherhand doesnt and saves just the one page.  Unfortunately this is a trail version and the user needs to save these files on a regular.
    Any help would be appriciated!
    thanks
    John

    This seems to have done the trick!
    Thanks for your help!  Appreciate it.
    AbhigyanModi wrote:
    And are you printing single or multiple worksheets in the Excel document?
    If multiple, you should ensure that the dpi setting for each sheet's page setup is set to the same number.

  • All I can save a project under is .prproj - why can't I save under another file type?

    I'm using a trial version to edit my Gopro videos that are in MP4 file type. after I edit the videos the only option that it offers is the .prproj which I can only use this software to watch my video afterwards. I want to save my project in the MP4 format and watch on whatever media player I want like I always do but it isn't allowing me to do so. Why is this? Is it because I am using a trial version? I was told that I can do what it is I'm trying to do and that the trial was a FULL working version. Any help or advice is greatly appreciated.

    Never mind. I was able to figure out the problem via YouTube. Thanks anyway.

  • Delete pages in my .pdf file and save as another file?

    Just purchase the subscription to a year worth of converting files to word/excel.  However, the conversion isn't accurate and I only purchase this to enable me to delete pages in my pdf file that I don't want...

    Hi,
    To delete page(s) in PDF file:
    1. Open your PDF file in Acrobat
    2. Select "Tools" from right top corner of the document windows
    3. Select " Manipulate Pages"
    4. Select "Delete".
    You can download Acrobat XI Pro trial version from www.adobe.com
    Hisami

  • Save and dependant files problem

    hi
    when i press f12 to see in the browser i get the "put
    dependant files" dialogue. why is that and how can i turn it
    off?

    Hi,
    I had that problem when I was working on a website at school
    using a mac but when I used it at home on a pc it was fine. Im not
    sure if this will work for you (it did for me) I just moved the few
    pages into a new folder and redefined the site. It worked for me im
    not sure if it will work for you.

  • Excel 2010 missing default suggested file name in Save As dialog box

    I’m using Excel 2010 running on Windows 7 (32 bit).  When I open a certain file which produces the following message: "A file is in a different file format than its extension indicates", and then go to “Save As” (or “Save”) the
    file, the default suggested file name is missing (blank).  This didn't occur in previous versions of Excel. 
    In previous versions, Excel would automatically populate the original file name in to the File Name field.
      I have searched all over the net, looking for a way to change Excel so that it will once again populate the file name in this situation. 
    To reproduce:
    Create a new blank workbook
    save as type “Web Page”, (i.e. File name:  “Blank Example.html”)
    Close workbook
    In windows, rename file from .html to .xls  (i.e. rename “Blank Example.html” to “Blank Example.xls”)
    In Excel open renamed file (i.e. “Blank Example.xls”) and click “Yes” when prompted with the “A file is in a different file format than its extension indicates” message.
    Do a “Save As” and you will notice that the File Name is blank. In previous versions, this field would contain the current workbook file name
     (i.e. “Blank Example.xls”)
    Any help will be greatly appreciated.

    Hi Jaynet,
    In order to re-produce this, you need to answer "yes" to the rename file prompt and then continue with step 5 (above).
    The reason for this is not an exercise in futility - I assure you.  At my work and elsewhere, when web developers have created features to permit the end user to save web data in Excel format, often times the Excel files are saved locally in Excel's
    html format (but with the .xls
    extension). 
    (I actually prefer the .xls
    extension, because it is easier to just double-click the file to open in Excel, rather than to select the open-with and then select Excel. a file with the .html extension will default open in your default browser. Now, I could change my default program
    for the .html extension, but that would only solve a part of the problem and would not really address the bigger issue and that being that Microsoft changed a behavior in Excel and may not even be aware that it was a much used feature. )
    To continue, when I go to open the resulting Excel file, I am prompted with the message that the file type does not match the extension (which is fine and not bothersome to me).  It's at this point when I go to save the file that I get really annoyed.
    In previous versions of Excel, the default file name would be pre-filled with the current name of the file and the default file type would state that it is a Web html file.  I would just change the file type to Excel Workbook and hit enter to save.
    I would be prompted with "Are you sure you want to overwrite your existing file?" message and I would click "yes" and that would be that.
    However, in Excel 2010, because the default file name is blank, I then need to re-type the name into the field to save the file. 
    Any help is greatly appreciated.
    Thanks

  • Trying to export my forms results to excel  error message is adobe can not save as the file is open

    trying to export my forms results to excel, error message is adobe cn not save as the file is open in another location,   however, no other file is open.

    Thanks for continuing the help, but it is a medical realted form and I will just keep it confidential at this time.
    Larry Lakes,  Executive Director
    The HANDLE Institute
    [email protected]
    541-639-1588
    P. O. Box 6264
    Bend, OR  97708

  • When a user rasterizes a color image in AI and copies into Excel and saves file the image is BW

    When a user rasterizes a color image in Illustrator and then copies it into Excel and saves the file the image turns black and white. I uninstalled and reinstalled the whole suite already, deleted the perference files that i could find. and also look at the rasterizing settings they are the same as mine and another user. Any other things I can try? Where are the default rasterize settings stored at?

    You can do a save for web and choose .png or ,jpg format. Uncheck transparency.

  • Problems with Adobe Flash Professional CC (CS6 too) to save animated .gif file or perfect .swf file

    Hello,
    I have a problem with Adobe Flash Professional CC and CS6 to save animated .gif file. Here is very simple work with logo. But I can't save a perfect file swf or gif and it's so bad news for me. Logo .swf file save with bugs. Bugs just see then file insert in freeshop page. Here is just example test page, it let you see logo bugs - http://tagraseshop.graphicsrim.eu . Here is real page, but it's not my, it's freeshop with old logo and I have corect it - http://www.tagras.lt
    Animated .gif file absoluted not saved in Flash CC. Just gif picture. And why? My os Windows 8.1 .  Indeed I try to save on Adobe Flash Professional CS6. It's not save too...
    Gif "animated" - https://mega.co.nz/#!D8pEVaRR!Gjg-nI4T-0vROV9xCa1XfXz4br1X9lpQfUR0nQNT LK4
    Swf with bugs - https://mega.co.nz/#!jo5lSRyS!1x6GjWqYsf7n4KknUs6eF8EqZXEv9e8RsSpGd8h5 jGQ
    Fla - flash document - https://mega.co.nz/#!C94nCDSS!7yKF9FIBvYtVC9r8kYiJ0l0xzUm_R2HwgoXks6iM zUA
    Perfect animation speed is here - http://e-shoptagras.graphicsrim.eu
    Who can help to me?
    Any ideas?
    Thanks for your help in advance!

    Thanks, but I use publish/export settings with GPU hardware acceleration and flash version 11.2 (and 11.8) but nothing happening.
    And why gif file is not all transparenty then I insert on lightblue background? It can't export good quality? Also I use Photoshop, After Effects, Adobe Edge Animate. And nothing happening. Egde animate file .oam is not good for old website navigation. It can't be inserted in freeshop site from navigation... I use logo file .oam just for example here - http://e-shoptagras.graphicsrim.eu
    In reality I want swf file, but we don't find why logo flickering? here http://tagraseshop.graphicsrim.eu
    All file's are transparenty - https://mega.co.nz/#!f8B2CD5R!J8uCJt9Sdq4Suz4HLhTHz8bzJcSWXMBIKcKZgkD3z8c
    I need help! Please!

  • I want to update forms in the response file and save it. Sometimes it works, but often I need to save the response file in another name. Very inconsequent! How come?

    I have a form that I am sending out and compiling in the response file. These forms I also want to be able to update after receiving them (when I have them in the response file).
    But when I do the updates I need to re-save the response file with another name? The strange thing is that sometimes I can just update and save exactly the way I want it. But most of the time I get the message "This file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder."
    Can someone please help me to figure out how to solve this issue. I know that I am the only one that has the file open. I am encountering the same issue in both Acrobat Pro 9 and Acrobat Pro X. (File was created in Acrobat Pro 9)

    Good day!
    A simple Paste does not work for you?
    It should place the clipboard content as a new Layer which you can then move around.
    If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
    Regards,
    Pfaffenbichler

  • Good day, I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.

    Good day,
    I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.
    When trying to merge the files, this file ask for a Password. No password was issued from the setup or mail?

    Good day abrieb93050306,
    I can understand your concern, however can you please let me know that are you able to open both the PDF files ( the one you converted form excel to pdf & the other pdf that was mailed to you ) individually without using any password?
    As it asks for the password, it means that the postal mailed PDF is password protected. You can ask for the password from the sender of the postal mail & then try to combine the files.
    Please follow the steps in the provided KB doc.to combine the files : Combine files into single PDF | Adobe Acrobat DC tutorials
    This will probably resolve your issue.
    Let me know if you still experience any issue.
    Regards,
    Aadesh

  • Save as PDF file as excel file or text file in vba excel

    Hi all,
    I am opening a PDF document fromm VBA excel. After opening document it should save the document as excel file or text file in one folder.
    I am trying to do this with some code but not able to , pls help me thatnks.
    Dim AcroApp As Acrobat.CAcroApp
      Dim Part1Document As Acrobat.CAcroPDDoc
    Set Part1Document = CreateObject("AcroExch.PDDoc")
       Part1Document.Open ("Z:\EG MI Information\MIS\Requests\Req_156\NO.1.pdf")
      Dim app As Object, avdoc As Object, pageview As Object
    Set app = CreateObject("AcroExch.App")
    Set avdoc = app.GetActiveDoc
    app.MenuItemExecute ("SaveAs")
    thanks
    Abhijeet

    Hi,
    In the documentation for the saveAs function it has the following params
    cPath The device-independent path in which to save the file.
    cConvID (optional, Acrobat 6.0) A conversion ID string that specifies the conversion
    file type.
    cFS (optional, Acrobat 7.0) A string that specifies the source file system name.
    bCopy (optional, Acrobat 7.0) A Boolean value which, if true, saves the PDF file
    as a copy. The default is false.
    bPromptToOverwrite (optional, Acrobat 7.0) A Boolean value which, if true, prompts the user if
    the destination file already exists. The default is false.
    In order to get a text file saved you need to specify the correct cConvID.
    See the documentation for the valid convID's - http://livedocs.adobe.com/acrobat_sdk/10/Acrobat10_HTMLHelp/JS_API_AcroJS.88.519.html
    Please note the Acrobat SDK contains all the information and does not require much installing ( as it is a zip file(on windows) and a disc image (on Mac) it just needs extracted)
    Regards
    Malcolm

Maybe you are looking for